MODULES-MIB :: fethPortReadableFrames

MIB Reference — IPNetwork Monitor · Updated October 02, 2026

All MIBs › MODULES-MIB › fethPortReadableFrames

fethPortReadableFrames

Module: MODULES-MIB

OID (symbolic): MODULES-MIB::fethPortReadableFrames

OID (numeric): 1.3.6.1.4.1.81.12.6.1.1.1.14

Node type: OBJECT-TYPE

Type: Counter

Access: read-only

Description: This object is the number of frames of valid frame length that have been received on this port. This counter is incremented by one for each frame received on this port whose OctetCount is greater than or equal to minFrameSize and less than or equal to maxFrameSize (Ref: IEEE 802.3 Std, 4.4.2.1) and for which the FCSError and CollisionEvent signals are not asserted.

This statistic provides one of the parameters necessary for obtaining the packet error rate. REFERENCE Reference IEEE Draft Std 802.3u/D4 Rptr Mgt, 30.4.3.1.4, aReadableFrames. Reference IETF 100Base-T Repeater MIB, rptr100MonitorPortReadableFrames.

What is fethPortReadableFrames?

The 100Base-T repeater MIB readable-frames counter for this port, counting legal-length frames received without FCS or collision errors; it mirrors ethPortReadableFrames but applies specifically to fast-Ethernet hardware and is one of the inputs used to compute this port's packet error rate.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.81.12.6.1.1.1.14
snmpwalk -v2c -c public <target> MODULES-MIB::fethPortReadableFrames

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.81.12.6.1.1.1.14.1
snmpget -v2c -c public <target> MODULES-MIB::fethPortReadableFrames.1

Start monitoring Legacy multi-protocol Ethernet/token-ring hub or concentrator chassis with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the MODULES-MIB::fethPortReadableFrames OID value, configure state conditions and alerts, and monitor any Legacy multi-protocol Ethernet/token-ring hub or concentrator chassis from a single console.

OID Breakdown

Upper-level ancestors (8 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.81lannetGEN-MIB
1.3.6.1.4.1.81.12ethLANNET-MIB
Numeric OIDNameModule
1.3.6.1.4.1.81.12.6fethMODULES-MIB
1.3.6.1.4.1.81.12.6.1fethPortMODULES-MIB
1.3.6.1.4.1.81.12.6.1.1fethPortTableMODULES-MIB
1.3.6.1.4.1.81.12.6.1.1.1fethPortEntryMODULES-MIB
1.3.6.1.4.1.81.12.6.1.1.1.14fethPortReadableFramesMODULES-MIB