All MIBs › MODULES-MIB › fethPortRunts
fethPortRunts
Module: MODULES-MIB
OID (symbolic): MODULES-MIB::fethPortRunts
OID (numeric): 1.3.6.1.4.1.81.12.6.1.1.1.20
Node type: OBJECT-TYPE
Type: Counter
Access: read-only
Description: This counter is incremented by one for each CarrierEvent on this port that meets one of the following two conditions. Only one test need be made. a) The ActivityDuration is greater than ShortEventMaxTime and less than validPacketMinTime and the CollisionEvent signal is deasserted. b) The OctetCount is less than 64, the ActivityDuration is greater than ShortEventMaxTime and the CollisionEvent signal is deasserted. ValidPacketMinTime is greater than or equal to 552 bit times and less than 565 bit times.
ValidPacketMinTime has tolerances included to provide for circuit losses between a conformance test point at the AUI and the measurement point within the state machine.
Runts usually indicate collision fragments, a normal network event. In certain situations associated with large diameter networks a percentage of collision fragments may exceed ValidPacketMinTime. REFERENCE Reference IEEE Draft Std 802.3u/D4 Rptr Mgt, 30.4.1.3.10, aRunts. Reference IETF 100Base-T Repeater MIB, rptr100MonitorPortRunts.
What is fethPortRunts?
Counts undersized carrier events on this fast-Ethernet port that fall between the short-event and valid-frame thresholds, the same runts concept as ethPortRunts; these usually reflect normal collision fragments, though a high sustained rate on one port is worth checking for cabling or NIC issues.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.81.12.6.1.1.1.20 snmpwalk -v2c -c public <target> MODULES-MIB::fethPortRunts
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.81.12.6.1.1.1.20.1 snmpget -v2c -c public <target> MODULES-MIB::fethPortRunts.1
Start monitoring Legacy multi-protocol Ethernet/token-ring hub or concentrator chassis with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the MODULES-MIB::fethPortRunts OID value, configure state conditions and alerts, and monitor any Legacy multi-protocol Ethernet/token-ring hub or concentrator chassis from a single console.
OID Breakdown
Upper-level ancestors (8 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.81 | lannet | GEN-MIB |
| 1.3.6.1.4.1.81.12 | eth | LANNET-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.81.12.6 | feth | MODULES-MIB |
| 1.3.6.1.4.1.81.12.6.1 | fethPort | MODULES-MIB |
| 1.3.6.1.4.1.81.12.6.1.1 | fethPortTable | MODULES-MIB |
| 1.3.6.1.4.1.81.12.6.1.1.1 | fethPortEntry | MODULES-MIB |
| 1.3.6.1.4.1.81.12.6.1.1.1.20 | fethPortRunts | MODULES-MIB |