All MIBs › CISCOSB-Tuning
Organization: Cisco Small Business
Last Updated: 2009--0-3-
Category: Domain: System Management, Vendor: Cisco
Description: Provides performance tuning parameters for memory, buffers, and system resources on Cisco Small Business devices.
Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.
What Is CISCOSB-Tuning?
CISCOSB-Tuning is a Cisco Small Business private enterprise MIB that provides performance tuning parameters for memory, buffers, and system resource limits on Cisco Small Business managed switches. It exposes objects for adjusting task/logging priority levels, debug levels, diagnostic request logging, and resource-sizing tunables such as maximum forwarding-table (bridge) entries. It directly supports software status monitoring: rsDiagnosticsTable captures diagnostic request codes, locations, and text useful for tracking internal error/event conditions, while eventMessageTable logs system events, both helping an administrator detect abnormal internal conditions or resource exhaustion on the switch. It is a Cisco proprietary enterprise MIB specific to the Small Business switch platform and does not appear to depend on external standards MIBs beyond Cisco's own private enterprise tree. It is deployed on Cisco Small Business managed switches where administrators need to tune resource limits or investigate internal diagnostic/event logs. Engineers can download the CISCOSB-Tuning file directly to load it into their MIB browser.
IPNetwork Monitor allows you to monitor SNMP objects defined in CISCOSB-Tuning. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.
Supported Devices
- Cisco Small Business managed switch
Monitoring Examples
An administrator would poll rsDiagnosticsTable/rsDiagnosticsEntry (indexed by rsDiagnosticsRequestId) to review rsDiagnosticsCode, rsDiagnosticsLocation, and rsDiagnosticsText for recent internal diagnostic events, and check eventMessageTable/eventMessageEntry for logged system events. A growing number of diagnostic entries with error codes concentrated at one rsDiagnosticsLocation would point to a specific subsystem repeatedly failing, while rsMaxBridgeForwardingEntriesTuning set near its practical limit could explain MAC table exhaustion symptoms.
What Can Be Monitored
- diagnostic event log
- diagnostic error codes/location
- system event messages
- resource tuning limits (bridge forwarding table size)
- debug/logging level
This MIB depends on
Related MIBs
Imported Objects
From CISCOSB-MIB
| switch001 | MODULE-IDENTITY |
From SNMPv2-SMI
| IpAddress | |
| MODULE-IDENTITY | |
| OBJECT-TYPE | |
| Unsigned32 |
From SNMPv2-TC
| DisplayString | |
| RowStatus | |
| TEXTUAL-CONVENTION | |
| TruthValue |
OIDs
| OID symbolic | OID numeric | Type | Access | Description |
|---|---|---|---|---|
| STR eventDesc | 1.3.6.1.4.1.9.6.1.101.29.6.1.2 | DisplayString | read-only | The event discription, this text will include time and severity. |
| eventMessageEntry | 1.3.6.1.4.1.9.6.1.101.29.6.1 | not-accessible | The row definition for this table. | |
| eventMessageTable | 1.3.6.1.4.1.9.6.1.101.29.6 | not-accessible | The Event Message table of the agent | |
| INT eventNum | 1.3.6.1.4.1.9.6.1.101.29.6.1.1 | INTEGER | read-only | The event number,the index of this table. |
| INT reaIpForwardEnable | 1.3.6.1.4.1.9.6.1.101.29.7.4 | INTEGER | read-write | The Platform will perform fast IP forwarding if only if this variable's value is enable. |
| INT reaIpxForwardEnable | 1.3.6.1.4.1.9.6.1.101.29.7.5 | INTEGER | read-write | The Platform will perform fast IPX forwarding if only if this variable's value is enable. |
| reaTunning | 1.3.6.1.4.1.9.6.1.101.29.7 | |||
| INT rlBrgMacHashChainLen | 1.3.6.1.4.1.9.6.1.101.29.27 | INTEGER | read-only | Current depth of the MAC address hashing Table |
| INT rlBrgMacHashChainLenAfterReset | 1.3.6.1.4.1.9.6.1.101.29.28 | INTEGER | read-write | Defines the depth in step of 4, of the MAC address hashing Table after reset. The mac chain length is the scalar value multiplied by 4. |
| INT rlBrgMacHashFunction | 1.3.6.1.4.1.9.6.1.101.29.29 | INTEGER | read-only | Current depth of the MAC address hashing Table |
| INT rlBrgMacHashFunctionAfterReset | 1.3.6.1.4.1.9.6.1.101.29.30 | INTEGER | read-write | Defines hash function vlan random mac random vlan sequntial mac sequential vlan sequential mac random vlan random mac sequntial |
| BIT rlDependendFeaturesEnabled | 1.3.6.1.4.1.9.6.1.101.29.23.1 | Bits | read-only | Current set of running features. These features combinations may limit by A. The same resource (such as ASIC module). B. limitation of product or logic for combination System limit is for up to 5 features First implemented with 3. |
| BIT rlDependendFeaturesEnabledAfterReset | 1.3.6.1.4.1.9.6.1.101.29.23.2 | Bits | read-write | Next system load (after reset) set of running features. These features combinations limited by A. The same resource (such as ASIC module). B. Limitation of product or logic for combination (one feature override the other). C. Per product some or all features status may not be changed. System limit is for up to 5 features First implemented with 3. |
| rlDependendFeaturesEnableTuning | 1.3.6.1.4.1.9.6.1.101.29.23 | |||
| rlDhcpServerTuning | 1.3.6.1.4.1.9.6.1.101.29.26 | |||
| INT rlDhcpSrvMaxAllocatedAddresses | 1.3.6.1.4.1.9.6.1.101.29.26.1 | INTEGER | read-only | Defines the maximal number of allocated addresses by DHCP server |
| INT rlDhcpSrvMaxAllocatedAddressesAfterReset | 1.3.6.1.4.1.9.6.1.101.29.26.2 | INTEGER | read-write | Defines the maximal number of allocated addresses by DHCP server activated after reset |
| rlDnsClTuning | 1.3.6.1.4.1.9.6.1.101.29.18 | |||
| rlHostParamEntry | 1.3.6.1.4.1.9.6.1.101.29.20.1 | not-accessible | Defines the contents of each line in the rlHostParamTable table. | |
| IP rlHostParamIpAddress | 1.3.6.1.4.1.9.6.1.101.29.20.1.6 | IpAddress | read-only | This variable indicates the current IpAddress value used in this run by the system. Applicable only if rlHostParamType has ipV4address value |
| STR rlHostParamName | 1.3.6.1.4.1.9.6.1.101.29.20.1.1 | DisplayString | read-only | Index to the rlHostParamTable. name of current value Mib for this entry. |
| OID rlHostParamObjectId | 1.3.6.1.4.1.9.6.1.101.29.20.1.7 | OBJECT IDENTIFIER | read-only | This variable indicates the current OBJECT IDENTIFIER value used in this run by the system. Applicable only if rlHostParamType has objectIdentifier value |
| OCT rlHostParamOctetString | 1.3.6.1.4.1.9.6.1.101.29.20.1.5 | OCTET STRING | read-only | This variable indicates the current OCTET STRING value used in this run by the system. Applicable only if rlHostParamType has octetString, ipV6address, ipV6zAddress, inetAddress, macAddress or displayString value |
| rlHostParamTable | 1.3.6.1.4.1.9.6.1.101.29.20 | not-accessible | table to show tuning : limits curent and after reset values. | |
| INT rlHostParamType | 1.3.6.1.4.1.9.6.1.101.29.20.1.3 | INTEGER | read-only | This variable indicates the type of this host parameter. int - the value will be appear in the rlHostParamValue instance of this conceptual row. uint - the value will be appear in the rlHostParamUINT instance of this conceptual row. octetString - the value will be appear in the rlHostParamOctetString instance of this conceptual row. ipV4address - the value will be appear in the rlHostParamIpAddress instance of this conceptual row. ipV6address - the value will be appear in the rlHostParamOctetString instance of this conceptual row, to be interpreted as indicated in INET-ADDRESS-MIB. ipV6zAddress - the value will be appear in the rlHostParamOctetString instance of this conceptual row, to be interpreted as indicated in INET-ADDRESS-MIB. inetAddress - the inet address type will be appear in the rlHostParamUINT instance and inet address itself will be appear in the rlHostParamOctetString instance of this conceptual row, to be interpreted as indicated in INET-ADDRESS-MIB. macAddress - the value will be appear in the rlHostParamOctetString instance of this conceptual row, to be interpreted as in SNMPv2-TC. objectIdentifier - the value the value will be appear in the rlHostParamObjectId instance of this conceptual row. displayString - the value will be appear in the rlHostParamOctetString instance of this conceptual row, to be interpreted as in SNMPv2-TC. truthValue - the value will be appear in the rlHostParamUINT instance of this conceptual row, to be interpreted as in SNMPv2-TC. portlist - the value will be appear in the rlHostParamOctetString instance of this conceptual row, to be interpreted as in Q-BRIDGE-MIB. |
| U32 rlHostParamUINT | 1.3.6.1.4.1.9.6.1.101.29.20.1.4 | Unsigned32 | read-only | This variable indicates the current UINT value used in this run by the system. Applicable only if rlHostParamType has 'uint', inetAddress or truthValue value |
| INT rlHostParamValue | 1.3.6.1.4.1.9.6.1.101.29.20.1.2 | INTEGER | read-only | This variable indicates the current INTEGER value used in this run by the system. Applicable only if rlHostParamType has 'int' value |
| rlIpDhcpSnoopingTuning | 1.3.6.1.4.1.9.6.1.101.29.24 | |||
| INT rlIscsiSnoopMaxNumOfConnections | 1.3.6.1.4.1.9.6.1.101.29.25.1 | INTEGER | read-only | Defines the presetly effective upper limit of iSCSI connections number the device guarantees to support |
| INT rlIscsiSnoopMaxNumOfConnectionsAfterReset | 1.3.6.1.4.1.9.6.1.101.29.25.2 | INTEGER | read-write | Defines the upper limit of iSCSI connections number the device will have to support following the looming System reset |
| rlIscsiSnoopTuning | 1.3.6.1.4.1.9.6.1.101.29.25 | |||
| INT rlMaxDnsClCacheRREntries | 1.3.6.1.4.1.9.6.1.101.29.18.1 | INTEGER | read-only | The current maximal number of DNS client cache entries. |
| INT rlMaxDnsClCacheRREntriesAfterReset | 1.3.6.1.4.1.9.6.1.101.29.18.2 | INTEGER | read-write | The future (after reset) maximal number of DNS client cache entries. |
| INT rlMaxDnsClNamesEntries | 1.3.6.1.4.1.9.6.1.101.29.18.5 | INTEGER | read-only | The current maximal number of DNS client static names entries. |
| INT rlMaxDnsClNamesEntriesAfterReset | 1.3.6.1.4.1.9.6.1.101.29.18.6 | INTEGER | read-write | The future (after reset) maximal number of DNS client static names entries. |
| INT rlMaxDnsClNCacheErrEntries | 1.3.6.1.4.1.9.6.1.101.29.18.3 | INTEGER | read-only | The current maximal number of DNS client negative cache entries. |
| INT rlMaxDnsClNCacheErrEntriesAfterReset | 1.3.6.1.4.1.9.6.1.101.29.18.4 | INTEGER | read-write | The future (after reset) maximal number of DNS client negative cache entries. |
| INT rlMaxIpDhcpSnoopingEntries | 1.3.6.1.4.1.9.6.1.101.29.24.1 | INTEGER | read-only | The current maximum number of DHCP snooping entries. |
| INT rlMaxIpDhcpSnoopingEntriesAfterReset | 1.3.6.1.4.1.9.6.1.101.29.24.2 | INTEGER | read-write | The future (after reset) maximum number of DHCP snooping entries. |
| INT rlMaxNumberOfAccessRules | 1.3.6.1.4.1.9.6.1.101.29.14.1 | INTEGER | read-only | The Maximum number of rules per Access List that can be defined |
| INT rlMaxNumberOfAccessRulesAfterReset | 1.3.6.1.4.1.9.6.1.101.29.14.2 | INTEGER | read-write | The Maximum number of rules per Access List for after reset tuning |
| INT rlMaxOspfAbrPerArea | 1.3.6.1.4.1.9.6.1.101.29.21.7 | INTEGER | read-only | The current maximum number of ABR in ospf area. |
| INT rlMaxOspfAbrPerAreaAfterReset | 1.3.6.1.4.1.9.6.1.101.29.21.8 | INTEGER | read-write | The future (after reset) maximum number of ABR in ospf area. |
| INT rlMaxOspfAreas | 1.3.6.1.4.1.9.6.1.101.29.21.3 | INTEGER | read-only | The current maximum number of ospf areas. |
| INT rlMaxOspfAreasAfterReset | 1.3.6.1.4.1.9.6.1.101.29.21.4 | INTEGER | read-write | The future (after reset) maximum number of ospf areas. |
| INT rlMaxOspfInterfaces | 1.3.6.1.4.1.9.6.1.101.29.21.1 | INTEGER | read-only | The current maximum number of ospf interfaces. |
| INT rlMaxOspfInterfacesAfterReset | 1.3.6.1.4.1.9.6.1.101.29.21.2 | INTEGER | read-write | The future (after reset) maximum number of ospf interfaces. |
| INT rlMaxOspfNeighbors | 1.3.6.1.4.1.9.6.1.101.29.21.5 | INTEGER | read-only | The current maximum number of ospf neighbors. |
| INT rlMaxOspfNeighborsAfterReset | 1.3.6.1.4.1.9.6.1.101.29.21.6 | INTEGER | read-write | The future (after reset) maximum number of ospf neighbors. |
| INT rlMaxOspfNetsInAs | 1.3.6.1.4.1.9.6.1.101.29.21.9 | INTEGER | read-only | The current maximum number of networks in AS. |
| INT rlMaxOspfNetsInAsAfterReset | 1.3.6.1.4.1.9.6.1.101.29.21.10 | INTEGER | read-write | The future (after reset) maximum number of networks in AS. |
| rlMngInfTuning | 1.3.6.1.4.1.9.6.1.101.29.14 | |||
| rlOspfTuning | 1.3.6.1.4.1.9.6.1.101.29.21 | |||
| U32 rlSyslogCacheSize | 1.3.6.1.4.1.9.6.1.101.29.13.5 | Unsigned32 | read-only | The size of memory cache of last errors reported. This cache is cyclic. This is the current value. |
| U32 rlSyslogCacheSizeAfterReset | 1.3.6.1.4.1.9.6.1.101.29.13.6 | Unsigned32 | read-write | The size of memory cache of last errors reported. This cache is cyclic. This is the value after reset. |
| U32 rlSyslogFilePercentToDeleteWhenCompacting | 1.3.6.1.4.1.9.6.1.101.29.13.3 | Unsigned32 | read-only | When the flash file which is used by reports becomes full, a certain percentage of the old messages on flash are deleted. This is the current value. |
| U32 rlSyslogFilePercentToDeleteWhenCompactingAfterReset | 1.3.6.1.4.1.9.6.1.101.29.13.4 | Unsigned32 | read-write | When the flash file which is used by reports becomes full, a certain percentage of the old messages on flash are deleted. This is the value after reset. |
| rlSyslogTuning | 1.3.6.1.4.1.9.6.1.101.29.13 | |||
| INT rlTuningParamsAfterResetValue | 1.3.6.1.4.1.9.6.1.101.29.19.1.3 | INTEGER | read-only | This variable value that will be used in next run by the system. i.e. the value will be effective after next reboot |
| INT rlTuningParamsCurrentValue | 1.3.6.1.4.1.9.6.1.101.29.19.1.2 | INTEGER | read-only | This variable current value used in this run by the system. |
| INT rlTuningParamsDefaultValue | 1.3.6.1.4.1.9.6.1.101.29.19.1.4 | INTEGER | read-only | This variable value that is used by the system as default. |
| rlTuningParamsEntry | 1.3.6.1.4.1.9.6.1.101.29.19.1 | not-accessible | Defines the contents of each line in the rlTuningParamsTable table. | |
| INT rlTuningParamsMaximalValue | 1.3.6.1.4.1.9.6.1.101.29.19.1.6 | INTEGER | read-only | This variable value indicate maximum value. This is the upper limit for editing the value after reset. |
| INT rlTuningParamsMinimalValue | 1.3.6.1.4.1.9.6.1.101.29.19.1.5 | INTEGER | read-only | This variable value indicate minimum value. this is the lower limit for editing the value after reset. |
| STR rlTuningParamsName | 1.3.6.1.4.1.9.6.1.101.29.19.1.1 | DisplayString | read-only | Index to the rlTuningParamsTable. name of current value Mib for this entry. |
| rlTuningParamsTable | 1.3.6.1.4.1.9.6.1.101.29.19 | not-accessible | table to show tuning : limits curent and after reset values. | |
| INT rlTunnnelSpecialVID | 1.3.6.1.4.1.9.6.1.101.29.22.5 | INTEGER | read-only | The default special tunnel vlan vid. |
| INT rlTunnnelSpecialVIDAfterReset | 1.3.6.1.4.1.9.6.1.101.29.22.6 | INTEGER | read-write | The default special tunnel vlan vid after reset. |
| INT rlUnauthMACsInnerVID | 1.3.6.1.4.1.9.6.1.101.29.22.3 | INTEGER | read-only | The unauthorized MACs inner vlan vid. |
| INT rlUnauthMACsInnerVIDAfterReset | 1.3.6.1.4.1.9.6.1.101.29.22.4 | INTEGER | read-write | The unauthorized MACs inner vlan vid after rest |
| INT rlVlanDefaultVID | 1.3.6.1.4.1.9.6.1.101.29.22.1 | INTEGER | read-only | The default vlan vid. |
| INT rlVlanDefaultVIDAfterReset | 1.3.6.1.4.1.9.6.1.101.29.22.2 | INTEGER | read-write | The default vlan vid after rest |
| rlVlanTuning | 1.3.6.1.4.1.9.6.1.101.29.22 | |||
| INT rsConfirmMessagTab | 1.3.6.1.4.1.9.6.1.101.29.5 | INTEGER | read-write | This variable enables the operator to confirm all the message in the event Message Table. |
| INT rsDbgLevel | 1.3.6.1.4.1.9.6.1.101.29.3 | INTEGER | read-write | This variable indicates the debug level the Router Server works. the range of this variable is 1..100 |
| INT rsDiagnosticsCode | 1.3.6.1.4.1.9.6.1.101.29.4.1.2 | INTEGER | read-only | The code of the rejected the SNMP request whose diagnostics are specified by this entry. This code may be used to find out the reason for rejection if the diagnostic text is unavailable. |
| rsDiagnosticsEntry | 1.3.6.1.4.1.9.6.1.101.29.4.1 | not-accessible | The row definition for this table. | |
| INT rsDiagnosticsLocation | 1.3.6.1.4.1.9.6.1.101.29.4.1.3 | INTEGER | read-only | The internal location in the SW rejecting the SNMP request whose diagnostics are specified by this entry. This information is available for debugging purposes only and will be returned in GET requests only if rsDbgLevel >= 99. |
| INT rsDiagnosticsRequestId | 1.3.6.1.4.1.9.6.1.101.29.4.1.1 | INTEGER | read-only | The request id of the rejected SNMP request whose diagnostics are specified by this entry. If request id 0xFFFFFFFF is given, the diagnostic of the last rejected SNMP request sent by the querying NMS is returned. |
| rsDiagnosticsTable | 1.3.6.1.4.1.9.6.1.101.29.4 | not-accessible | The diagnostics table of the agent | |
| STR rsDiagnosticsText | 1.3.6.1.4.1.9.6.1.101.29.4.1.4 | DisplayString | read-only | The diagnostic text of the rejected SNMP request whose diagnostics are specified by this entry. |
| INT rsDiagnosticTextSource | 1.3.6.1.4.1.9.6.1.101.29.16 | INTEGER | read-write | The source from which SNMP diagnostics message texts should be taken. |
| INT rsHighPriority | 1.3.6.1.4.1.9.6.1.101.29.1 | INTEGER | read-write | This variable indicates the time interval the forwarding task inside the RS works in High Priority Mode. |
| INT rsIpmFftAging | 1.3.6.1.4.1.9.6.1.101.29.8.12.1.3 | INTEGER | read-write | The aging timeout of the IPM FFT Tables. |
| INT rsLowPriority | 1.3.6.1.4.1.9.6.1.101.29.2 | INTEGER | read-write | This variable indicates the time interval the forwarding task inside the RS works in Low Priority Mode. |
| INT rsMaxArpEntries | 1.3.6.1.4.1.9.6.1.101.29.8.3.1 | INTEGER | read-only | Maximal number of entries in Arp forwarding table. |
| INT rsMaxArpEntriesAfterReset | 1.3.6.1.4.1.9.6.1.101.29.8.3.2 | INTEGER | read-write | Future maximal number of entries in Arp forwarding table. |
| rsMaxArpEntriesTuning | 1.3.6.1.4.1.9.6.1.101.29.8.3 | |||
| INT rsMaxBrgFrwEntries | 1.3.6.1.4.1.9.6.1.101.29.8.1.1 | INTEGER | read-only | Maximal number of entries in bridge forwarding table. |
| INT rsMaxBrgFrwEntriesAfterReset | 1.3.6.1.4.1.9.6.1.101.29.8.1.2 | INTEGER | read-write | Future maximal number of entries in bridge forwarding table. |
| rsMaxBridgeForwardingEntriesTuning | 1.3.6.1.4.1.9.6.1.101.29.8.1 | |||
| INT rsMaxDhcpConns | 1.3.6.1.4.1.9.6.1.101.29.8.11.1 | INTEGER | read-only | The current maximal number of DHCP connections. |
| INT rsMaxDhcpConnsAfterReset | 1.3.6.1.4.1.9.6.1.101.29.8.11.2 | INTEGER | read-write | The future (after reset) maximal number of DHCP connections. |
| rsMaxDhcpTuning | 1.3.6.1.4.1.9.6.1.101.29.8.11 | |||
| INT rsMaxdot1xEapRequestEntries | 1.3.6.1.4.1.9.6.1.101.29.8.24.1 | INTEGER | read-only | The maximum number of eap request packets entries that can be retransmitted. |
| INT rsMaxdot1xEapRequestEntriesAfterReset | 1.3.6.1.4.1.9.6.1.101.29.8.24.2 | INTEGER | read-write | Future maximum number of eap request packets entries that can be retransmitted. |
| rsMaxdot1xEapRequestTuning | 1.3.6.1.4.1.9.6.1.101.29.8.24 | |||
| INT rsMaxDspClntEntries | 1.3.6.1.4.1.9.6.1.101.29.8.6.1 | INTEGER | read-only | Maximal number of entries in rsSdClientsTable. |
| INT rsMaxDspClntEntriesAfterReset | 1.3.6.1.4.1.9.6.1.101.29.8.6.2 | INTEGER | read-write | Future maximal number of entries in rsSdClientsTable. |
| rsMaxDspClntEntriesTuning | 1.3.6.1.4.1.9.6.1.101.29.8.6 | |||
| INT rsMaxDvmrpInterfaceEntries | 1.3.6.1.4.1.9.6.1.101.29.8.12.4.7 | INTEGER | read-write | Maximal number of interfaces in the Dvmrp Interface Table. |
| INT rsMaxDvmrpInterfaceEntriesAfterReset | 1.3.6.1.4.1.9.6.1.101.29.8.12.4.8 | INTEGER | read-write | Future maximal number of interfaces in the Dvmrp Interface Table. |
| INT rsMaxDvmrpMRouteEntries | 1.3.6.1.4.1.9.6.1.101.29.8.12.4.5 | INTEGER | read-only | Maximal number of entries in the Dvmrp Multicast Route Table. |
| INT rsMaxDvmrpMRouteEntriesAfterReset | 1.3.6.1.4.1.9.6.1.101.29.8.12.4.6 | INTEGER | read-write | Future maximal number of entries in the Dvmrp Multicast Route Table. |
| INT rsMaxDvmrpNeighborEntries | 1.3.6.1.4.1.9.6.1.101.29.8.12.4.1 | INTEGER | read-only | Maximal number of entries in the Dvmrp Neighbor Table. |
| INT rsMaxDvmrpNeighborEntriesAfterReset | 1.3.6.1.4.1.9.6.1.101.29.8.12.4.2 | INTEGER | read-write | Future maximal number of entries in the Dvmrp Neighbor Table. |
| INT rsMaxDvmrpRouteEntries | 1.3.6.1.4.1.9.6.1.101.29.8.12.4.3 | INTEGER | read-only | Maximal number of entries in the Dvmrp Route Table. |
| INT rsMaxDvmrpRouteEntriesAfterReset | 1.3.6.1.4.1.9.6.1.101.29.8.12.4.4 | INTEGER | read-write | Future maximal number of entries in the Dvmrp Route Table. |
| rsMaxDvmrpTuning | 1.3.6.1.4.1.9.6.1.101.29.8.12.4 | |||
| rsMaxEntriesTuning | 1.3.6.1.4.1.9.6.1.101.29.8 | |||
| INT rsMaxGvrpVlans | 1.3.6.1.4.1.9.6.1.101.29.8.17.1 | INTEGER | read-only | The maximum number of VLANs that can participant in Gvrp. |
| INT rsMaxGvrpVlansAfterReset | 1.3.6.1.4.1.9.6.1.101.29.8.17.2 | INTEGER | read-write | Future maximal number of VLANs that can participant in Gvrp. |
| rsMaxGvrpVlansTuning | 1.3.6.1.4.1.9.6.1.101.29.8.17 | |||
| INT rsMaxIgmpCacheEntries | 1.3.6.1.4.1.9.6.1.101.29.8.12.2.3 | INTEGER | read-only | Maximal number of entries in the IGMP Cache Table. |
| INT rsMaxIgmpCacheEntriesAfterReset | 1.3.6.1.4.1.9.6.1.101.29.8.12.2.4 | INTEGER | read-write | Future maximal number of entries in the IGMP Cache Table. |
| INT rsMaxIgmpInterfaceEntries | 1.3.6.1.4.1.9.6.1.101.29.8.12.2.1 | INTEGER | read-only | Maximal number of entries in the IGMP Neighbor Table. |
| INT rsMaxIgmpInterfaceEntriesAfterReset | 1.3.6.1.4.1.9.6.1.101.29.8.12.2.2 | INTEGER | read-write | Future maximal number of entries in the IGMP Neighbor Table. |
| INT rsMaxIgmpSnoopGroupEntries | 1.3.6.1.4.1.9.6.1.101.29.8.14.1 | INTEGER | read-only | The maximum number of entries in the IGMP Snooping group table. |
| INT rsMaxIgmpSnoopGroupEntriesAfterReset | 1.3.6.1.4.1.9.6.1.101.29.8.14.2 | INTEGER | read-write | Future maximal number of entries in the IGMP Snooping group table. |
| rsMaxIgmpSnoopTuning | 1.3.6.1.4.1.9.6.1.101.29.8.14 | |||
| rsMaxIgmpTuning | 1.3.6.1.4.1.9.6.1.101.29.8.12.2 | |||
| INT rsMaxIpEcmpEntrySize | 1.3.6.1.4.1.9.6.1.101.29.8.23.1 | INTEGER | read-only | Maximum number of ECMP Sets for forwarding. |
| INT rsMaxIpEcmpEntrySizeAfterReset | 1.3.6.1.4.1.9.6.1.101.29.8.23.2 | INTEGER | read-write | FutureMaximum number of ECMP Sets for forwarding. |
| rsMaxIpEcmpTuning | 1.3.6.1.4.1.9.6.1.101.29.8.23 | |||
| rsMaxIpFftEntriesTuning | 1.3.6.1.4.1.9.6.1.101.29.8.9 | |||
| rsMaxIpForwardingEntriesTuning | 1.3.6.1.4.1.9.6.1.101.29.8.2 | |||
| INT rsMaxIpFrwEntries | 1.3.6.1.4.1.9.6.1.101.29.8.2.1 | INTEGER | read-only | Maximal number of entries in Ip forwarding table. |
| INT rsMaxIpFrwEntriesAfterReset | 1.3.6.1.4.1.9.6.1.101.29.8.2.2 | INTEGER | read-write | Future maximal number of entries in Ip forwarding table. |
| INT rsMaxIpInterfaces | 1.3.6.1.4.1.9.6.1.101.29.8.25.1 | INTEGER | read-only | Maximal number of IP interfaces. Applies to inBand IP interfaces. |
| INT rsMaxIpInterfacesAfterReset | 1.3.6.1.4.1.9.6.1.101.29.8.25.2 | INTEGER | read-write | FutureMaximal number of IP interfaces. Applies to inBand IP interfaces. |
| rsMaxIpInterfaceTuning | 1.3.6.1.4.1.9.6.1.101.29.8.25 | |||
| INT rsMaxIpmFftEntries | 1.3.6.1.4.1.9.6.1.101.29.8.12.1.1 | INTEGER | read-only | The current maximal number of the IPM FFT Tables. |
| INT rsMaxIpmFftEntriesAfterReset | 1.3.6.1.4.1.9.6.1.101.29.8.12.1.2 | INTEGER | read-write | The future (after reset) maximal number of the IPM FFT Tables. |
| rsMaxIpmFftEntriesTuning | 1.3.6.1.4.1.9.6.1.101.29.8.12.1 | |||
| rsMaxIpmTuning | 1.3.6.1.4.1.9.6.1.101.29.8.12 | |||
| INT rsMaxIpmv4Routes | 1.3.6.1.4.1.9.6.1.101.29.8.28.5 | INTEGER | read-only | The maximum number of IPv4 routers ((*,G) and (S,G)) supported by the IPv4 Multicast Hardware Forwarding Table. |
| INT rsMaxIpmv4RoutesAfterReset | 1.3.6.1.4.1.9.6.1.101.29.8.28.6 | INTEGER | read-write | Future Maximal number of IPv4 routers ((*,G) and (S,G)) supported by the IPv4 Multicast Hardware Forwarding Table. |
| INT rsMaxIpmv6Routes | 1.3.6.1.4.1.9.6.1.101.29.8.28.7 | INTEGER | read-only | The maximum number of IPv6 routers ((*,G) and (S,G)) supported by the IPv6 Multicast Hardware Forwarding Table. |
| INT rsMaxIpmv6RoutesAfterReset | 1.3.6.1.4.1.9.6.1.101.29.8.28.8 | INTEGER | read-write | Future Maximal number of IPv6 routers ((*,G) and (S,G)) supported by the IPv6 Multicast Hardware Forwarding Table. |
| INT rsMaxIpNextHopEntries | 1.3.6.1.4.1.9.6.1.101.29.8.9.9 | INTEGER | read-only | The current maximal size of one IP NextHop Table. |
| INT rsMaxIpNextHopEntriesAfterReset | 1.3.6.1.4.1.9.6.1.101.29.8.9.10 | INTEGER | read-write | The future (after reset) maximal size of one NextHop Table. |
| INT rsMaxIpNextHopSetEntries | 1.3.6.1.4.1.9.6.1.101.29.8.22.1 | INTEGER | read-only | Maximal number of NextHops that may be used for forwarding for a destinaton. |
| INT rsMaxIpNextHopSetEntriesAfterReset | 1.3.6.1.4.1.9.6.1.101.29.8.22.2 | INTEGER | read-write | FutureMaximal number of NextHops that may be used for forwarding for a destinaton. |
| rsMaxIpNextHopSetTuning | 1.3.6.1.4.1.9.6.1.101.29.8.22 | |||
| INT rsMaxIpNFftEntries | 1.3.6.1.4.1.9.6.1.101.29.8.9.3 | INTEGER | read-only | The current maximal size of one IP NFFT Table. |
| INT rsMaxIpNFftEntriesAfterReset | 1.3.6.1.4.1.9.6.1.101.29.8.9.4 | INTEGER | read-write | The future (after reset) maximal size of one IP NFFT Table. |
| INT rsMaxIpNFftSysEntries | 1.3.6.1.4.1.9.6.1.101.29.8.9.7 | INTEGER | read-only | The current maximal size of the SYSTEM IP NFFT Table. |
| INT rsMaxIpNFftSysEntriesAfterReset | 1.3.6.1.4.1.9.6.1.101.29.8.9.8 | INTEGER | read-write | The future (after reset) maximal size of the SYSTEM IP NFFT Table. |
| INT rsMaxIpPrefixes | 1.3.6.1.4.1.9.6.1.101.29.8.21.1 | INTEGER | read-only | Maximal number of IP prefixes that router supports. |
| INT rsMaxIpPrefixesAfterReset | 1.3.6.1.4.1.9.6.1.101.29.8.21.2 | INTEGER | read-write | FutureMaximal number of IP prefixes that router supports. |
| rsMaxIpRoutesTuning | 1.3.6.1.4.1.9.6.1.101.29.8.28 | |||
| rsMaxIpRouteTuning | 1.3.6.1.4.1.9.6.1.101.29.8.21 | |||
| INT rsMaxIpSFftEntries | 1.3.6.1.4.1.9.6.1.101.29.8.9.1 | INTEGER | read-only | The current maximal size of one IP SFFT Table. |
| INT rsMaxIpSFftEntriesAfterReset | 1.3.6.1.4.1.9.6.1.101.29.8.9.2 | INTEGER | read-write | The future (after reset) maximal size of one IP SFFT Table. |
| INT rsMaxIpSFftSysEntries | 1.3.6.1.4.1.9.6.1.101.29.8.9.5 | INTEGER | read-only | The current maximal size of the SYSTEM IP SFFT Table. |
| INT rsMaxIpSFftSysEntriesAfterReset | 1.3.6.1.4.1.9.6.1.101.29.8.9.6 | INTEGER | read-write | The future (after reset) maximal size of the SYSTEM IP SFFT Table. |
| INT rsMaxIpv4Routes | 1.3.6.1.4.1.9.6.1.101.29.8.28.1 | INTEGER | read-only | The maximum number of IPv4 routers supported by the IPv4 Unicast Hardware Forwarding Table. |
| INT rsMaxIpv4RoutesAfterReset | 1.3.6.1.4.1.9.6.1.101.29.8.28.2 | INTEGER | read-write | Future Maximal number of IPv4 routers supported by the IPv4 Unicast Hardware Forwarding Table. |
| INT rsMaxIpv6AddrPerInterfaces | 1.3.6.1.4.1.9.6.1.101.29.8.27.3 | INTEGER | read-only | Maximal number of IPV6 Addresses per interfaces. |
| INT rsMaxIpv6AddrPerInterfacesAfterReset | 1.3.6.1.4.1.9.6.1.101.29.8.27.4 | INTEGER | read-write | FutureMaximal number of IPV6 Addresses per interfaces. |
| rsMaxIpv6FftEntriesTuning | 1.3.6.1.4.1.9.6.1.101.29.8.26 | |||
| INT rsMaxIpv6GlobalAddresses | 1.3.6.1.4.1.9.6.1.101.29.8.26.11 | INTEGER | read-only | Maximal global number of IPV6 addresses. |
| INT rsMaxIpv6GlobalAddressesAfterReset | 1.3.6.1.4.1.9.6.1.101.29.8.26.12 | INTEGER | read-write | FutureMaximal global number of IPV6 addresses. |
| INT rsMaxIpv6Interfaces | 1.3.6.1.4.1.9.6.1.101.29.8.27.1 | INTEGER | read-only | Maximal number of IPV6 interfaces. Applies to inBand IPV6 interfaces. |
| INT rsMaxIpv6InterfacesAfterReset | 1.3.6.1.4.1.9.6.1.101.29.8.27.2 | INTEGER | read-write | FutureMaximal number of IPV6 interfaces. Applies to inBand IPV6 interfaces. |
| rsMaxIpv6InterfaceTuning | 1.3.6.1.4.1.9.6.1.101.29.8.27 | |||
| INT rsMaxIpv6NextHopEntries | 1.3.6.1.4.1.9.6.1.101.29.8.26.7 | INTEGER | read-only | The current maximal size of one IPV6 NextHop Table. |
| INT rsMaxIpv6NextHopEntriesAfterReset | 1.3.6.1.4.1.9.6.1.101.29.8.26.8 | INTEGER | read-write | The future (after reset) maximal size of one NextHop Table. |
| INT rsMaxIpv6NextHopSetEntries | 1.3.6.1.4.1.9.6.1.101.29.8.26.9 | INTEGER | read-only | Maximal number of NextHops that may be used for forwarding for a destinaton. |
| INT rsMaxIpv6NextHopSetEntriesAfterReset | 1.3.6.1.4.1.9.6.1.101.29.8.26.10 | INTEGER | read-write | FutureMaximal number of NextHops that may be used for forwarding for a destinaton. |
| INT rsMaxIpv6Prefixes | 1.3.6.1.4.1.9.6.1.101.29.8.26.5 | INTEGER | read-only | Maximal number of IPV6 prefixes that router supports. |
| INT rsMaxIpv6PrefixesAfterReset | 1.3.6.1.4.1.9.6.1.101.29.8.26.6 | INTEGER | read-write | FutureMaximal number of IPV6 prefixes that router supports. |
| INT rsMaxIpv6Routes | 1.3.6.1.4.1.9.6.1.101.29.8.28.3 | INTEGER | read-only | The maximum number of IPv6 routers supported by the IPv6 Unicast Hardware Forwarding Table. |
| INT rsMaxIpv6RoutesAfterReset | 1.3.6.1.4.1.9.6.1.101.29.8.28.4 | INTEGER | read-write | Future Maximal number of IPv6 routers supported by the IPv6 Unicast Hardware Forwarding Table. |
| INT rsMaxIpv6SFftEntries | 1.3.6.1.4.1.9.6.1.101.29.8.26.1 | INTEGER | read-only | The current maximal size of one IPV6 SFFT Table. |
| INT rsMaxIpv6SFftEntriesAfterReset | 1.3.6.1.4.1.9.6.1.101.29.8.26.2 | INTEGER | read-write | The future (after reset) maximal size of one IPV6 SFFT Table. |
| INT rsMaxIpv6SFftSysEntries | 1.3.6.1.4.1.9.6.1.101.29.8.26.3 | INTEGER | read-only | The current maximal size of the SYSTEM IPV6 SFFT Table. |
| INT rsMaxIpv6SFftSysEntriesAfterReset | 1.3.6.1.4.1.9.6.1.101.29.8.26.4 | INTEGER | read-write | The future (after reset) maximal size of the SYSTEM IPV6 SFFT Table. |
| rsMaxIpxFftEntriesTuning | 1.3.6.1.4.1.9.6.1.101.29.8.10 | |||
| rsMaxIpxForwardingEntriesTuning | 1.3.6.1.4.1.9.6.1.101.29.8.4 | |||
| INT rsMaxIpxFrwEntries | 1.3.6.1.4.1.9.6.1.101.29.8.4.1 | INTEGER | read-only | Maximal number of entries in Ipx forwarding table. |
| INT rsMaxIpxFrwEntriesAfterReset | 1.3.6.1.4.1.9.6.1.101.29.8.4.2 | INTEGER | read-write | Future maximal number of entries in Ipx forwarding table. |
| INT rsMaxIpxNFftEntries | 1.3.6.1.4.1.9.6.1.101.29.8.10.3 | INTEGER | read-only | The current maximal size of one IPX NFFT Table. |
| INT rsMaxIpxNFftEntriesAfterReset | 1.3.6.1.4.1.9.6.1.101.29.8.10.4 | INTEGER | read-write | The future (after reset) maximal size of one IPX NFFT Table. |
| INT rsMaxIpxNFftSysEntries | 1.3.6.1.4.1.9.6.1.101.29.8.10.7 | INTEGER | read-only | The current maximal size of the SYSTEM IPX NFFT Table. |
| INT rsMaxIpxNFftSysEntriesAfterReset | 1.3.6.1.4.1.9.6.1.101.29.8.10.8 | INTEGER | read-write | The future (after reset) maximal size of the SYSTEM IPX NFFT Table. |
| INT rsMaxIpxSapEntries | 1.3.6.1.4.1.9.6.1.101.29.8.5.1 | INTEGER | read-only | Maximal number of entries in IpxSap table. |
| INT rsMaxIpxSapEntriesAfterReset | 1.3.6.1.4.1.9.6.1.101.29.8.5.2 | INTEGER | read-write | Future maximal number of entries in IpxSap table. |
| rsMaxIpxSapEntriesTuning | 1.3.6.1.4.1.9.6.1.101.29.8.5 | |||
| INT rsMaxIpxSFftEntries | 1.3.6.1.4.1.9.6.1.101.29.8.10.1 | INTEGER | read-only | The current maximal size of one IPX SFFT Table. |
| INT rsMaxIpxSFftEntriesAfterReset | 1.3.6.1.4.1.9.6.1.101.29.8.10.2 | INTEGER | read-write | The future (after reset) maximal size of one IPX SFFT Table. |
| INT rsMaxIpxSFftSysEntries | 1.3.6.1.4.1.9.6.1.101.29.8.10.5 | INTEGER | read-only | The current maximal size of the SYSTEM IPX SFFT Table. |
| INT rsMaxIpxSFftSysEntriesAfterReset | 1.3.6.1.4.1.9.6.1.101.29.8.10.6 | INTEGER | read-write | The future (after reset) maximal size of the SYSTEM IPX SFFT Table. |
| INT rsMaxNumberOfSockets | 1.3.6.1.4.1.9.6.1.101.29.8.20.1 | INTEGER | read-only | Maximal number of sockets. |
| INT rsMaxNumberOfSocketsAfterReset | 1.3.6.1.4.1.9.6.1.101.29.8.20.2 | INTEGER | read-write | Future Maximal number of sockets. |
| INT rsMaxNumberRpAddresesInGroupRange | 1.3.6.1.4.1.9.6.1.101.29.8.12.6.11 | INTEGER | read-only | Maximal number of rp addresses per group range in the RPSet Table. |
| INT rsMaxNumberRpAddresesInGroupRangeAfterReset | 1.3.6.1.4.1.9.6.1.101.29.8.12.6.12 | INTEGER | read-write | Future maximal number of rp addresses per group range in the RPSet Table. |
| INT rsMaxPigmpRouteEntries | 1.3.6.1.4.1.9.6.1.101.29.8.12.5.1 | INTEGER | read-only | Maximal number of entries in the IGMP Proxy Routing Table. |
| INT rsMaxPigmpRouteEntriesAfterReset | 1.3.6.1.4.1.9.6.1.101.29.8.12.5.2 | INTEGER | read-write | Future maximal number of entries in the IGMP Proxy Routing Table. |
| rsMaxPigmpTuning | 1.3.6.1.4.1.9.6.1.101.29.8.12.5 | |||
| INT rsMaxPimInterfaceEntries | 1.3.6.1.4.1.9.6.1.101.29.8.12.3.8 | INTEGER | read-write | Maximal number of interfaces in the PIM Interface Table. |
| INT rsMaxPimInterfaceEntriesAfterReset | 1.3.6.1.4.1.9.6.1.101.29.8.12.3.7 | INTEGER | read-write | Future maximal number of interfaces in the PIM Interface Table. |
| INT rsMaxPimNeighborEntries | 1.3.6.1.4.1.9.6.1.101.29.8.12.3.1 | INTEGER | read-only | Maximal number of entries in the PIM Neighbor Table. |
| INT rsMaxPimNeighborEntriesAfterReset | 1.3.6.1.4.1.9.6.1.101.29.8.12.3.2 | INTEGER | read-write | Future maximal number of entries in the PIM Neighbor Table. |
| INT rsMaxPimRouteEntries | 1.3.6.1.4.1.9.6.1.101.29.8.12.3.3 | INTEGER | read-only | Maximal number of entries in the PIM Route Table. |
| INT rsMaxPimRouteEntriesAfterReset | 1.3.6.1.4.1.9.6.1.101.29.8.12.3.4 | INTEGER | read-write | Future maximal number of entries in the PIM Route Table. |
| INT rsMaxPimRouteNextHopEntries | 1.3.6.1.4.1.9.6.1.101.29.8.12.3.5 | INTEGER | read-only | Maximal number of entries in the PIM Route Next Hop Table. |
| INT rsMaxPimRouteNextHopEntriesAfterReset | 1.3.6.1.4.1.9.6.1.101.29.8.12.3.6 | INTEGER | read-write | Future maximal number of entries in the PIM Route Next Hop Table. |
| INT rsMaxPimSmCRPEntries | 1.3.6.1.4.1.9.6.1.101.29.8.12.6.9 | INTEGER | read-only | Maximal number of entries in the RPSet Table. |
| INT rsMaxPimSmCRPEntriesAfterReset | 1.3.6.1.4.1.9.6.1.101.29.8.12.6.10 | INTEGER | read-write | Future maximal number of entries in the RPSet Table. |
| INT rsMaxPimSmInterfaceEntries | 1.3.6.1.4.1.9.6.1.101.29.8.12.6.5 | INTEGER | read-only | Maximal number of entries in the PIM Interface Table. |
| INT rsMaxPimSmInterfaceEntriesAfterReset | 1.3.6.1.4.1.9.6.1.101.29.8.12.6.6 | INTEGER | read-write | Future maximal number of entries in the PIM Interface Table. |
| INT rsMaxPimSmNeighborEntries | 1.3.6.1.4.1.9.6.1.101.29.8.12.6.1 | INTEGER | read-only | Maximal number of entries in the PIM Neighbor Table. |
| INT rsMaxPimSmNeighborEntriesAfterReset | 1.3.6.1.4.1.9.6.1.101.29.8.12.6.2 | INTEGER | read-write | Future maximal number of entries in the PIM Neighbor Table. |
| INT rsMaxPimSmRouteEntries | 1.3.6.1.4.1.9.6.1.101.29.8.12.6.3 | INTEGER | read-only | Maximal number of entries in the PIM Route Table. |
| INT rsMaxPimSmRouteEntriesAfterReset | 1.3.6.1.4.1.9.6.1.101.29.8.12.6.4 | INTEGER | read-write | Future maximal number of entries in the PIM Route Table. |
| INT rsMaxPimSmRPSetEntries | 1.3.6.1.4.1.9.6.1.101.29.8.12.6.7 | INTEGER | read-only | Maximal number of entries in the RPSet Table. |
| INT rsMaxPimSmRPSetEntriesAfterReset | 1.3.6.1.4.1.9.6.1.101.29.8.12.6.8 | INTEGER | read-write | Future maximal number of entries in the RPSet Table. |
| rsMaxPimSmTuning | 1.3.6.1.4.1.9.6.1.101.29.8.12.6 | |||
| rsMaxPimTuning | 1.3.6.1.4.1.9.6.1.101.29.8.12.3 | |||
| INT rsMaxPolicyMaxRulesEntries | 1.3.6.1.4.1.9.6.1.101.29.8.16.1 | INTEGER | read-only | Maximal number of entries in the Policy Route Table. |
| INT rsMaxPolicyMaxRulesEntriesAfterReset | 1.3.6.1.4.1.9.6.1.101.29.8.16.2 | INTEGER | read-write | Future maximal number of entries in the Policy Route Table. |
| INT rsMaxPolicySimpleMibMaxProfilesEntries | 1.3.6.1.4.1.9.6.1.101.29.8.16.5 | INTEGER | read-only | Maximal number of entries in the profile Policy SimpleMib Table. |
| INT rsMaxPolicySimpleMibMaxProfilesEntriesAfterReset | 1.3.6.1.4.1.9.6.1.101.29.8.16.6 | INTEGER | read-write | Future maximal number of entries in the profile Policy SimpleMib Table. |
| INT rsMaxPolicySimpleMibMaxRulesEntries | 1.3.6.1.4.1.9.6.1.101.29.8.16.3 | INTEGER | read-only | Maximal number of entries in the Policy SimpleMib Table. |
| INT rsMaxPolicySimpleMibMaxRulesEntriesAfterReset | 1.3.6.1.4.1.9.6.1.101.29.8.16.4 | INTEGER | read-write | Future maximal number of entries in the Policy SimpleMib Table. |
| rsMaxPolicyTuning | 1.3.6.1.4.1.9.6.1.101.29.8.16 | |||
| INT rsMaxRmonEtherHistoryEntries | 1.3.6.1.4.1.9.6.1.101.29.8.13.3 | INTEGER | read-only | Maximal number of entries in RMON EtherHistory table. |
| INT rsMaxRmonEtherHistoryEntriesAfterReset | 1.3.6.1.4.1.9.6.1.101.29.8.13.4 | INTEGER | read-write | Future maximal number of entries in RMON EtherHistory table. |
| INT rsMaxRmonLogEntries | 1.3.6.1.4.1.9.6.1.101.29.8.13.1 | INTEGER | read-only | Maximal number of entries in RMON Log table. |
| INT rsMaxRmonLogEntriesAfterReset | 1.3.6.1.4.1.9.6.1.101.29.8.13.2 | INTEGER | read-write | Future maximal number of entries in RMON Log table. |
| rsMaxRmonTuning | 1.3.6.1.4.1.9.6.1.101.29.8.13 | |||
| INT rsMaxSizeOfSocketDataPool | 1.3.6.1.4.1.9.6.1.101.29.8.20.3 | INTEGER | read-only | Maximal size of socket data pool. |
| INT rsMaxSizeOfSocketDataPoolAfterReset | 1.3.6.1.4.1.9.6.1.101.29.8.20.4 | INTEGER | read-write | Future Maximal size of socket data pool. |
| INT rsMaxSnmpCommunityEntries | 1.3.6.1.4.1.9.6.1.101.29.8.19.1 | INTEGER | read-only | The maximum number of snmpCommunityTable entries. |
| INT rsMaxSnmpCommunityEntriesAfterReset | 1.3.6.1.4.1.9.6.1.101.29.8.19.2 | INTEGER | read-write | Future maximum number of snmpCommunityTable entries. |
| rsMaxSnmpTuning | 1.3.6.1.4.1.9.6.1.101.29.8.19 | |||
| rsMaxSocketTuning | 1.3.6.1.4.1.9.6.1.101.29.8.20 | |||
| INT rsMaxTraceRouteControEntriesAfterReset | 1.3.6.1.4.1.9.6.1.101.29.8.18.2 | INTEGER | read-write | Future maximum number of trace route control entries. |
| INT rsMaxTraceRouteControlEntries | 1.3.6.1.4.1.9.6.1.101.29.8.18.1 | INTEGER | read-only | The maximum number of trace route control entries. |
| INT rsMaxTraceRouteProbeHistoryEntries | 1.3.6.1.4.1.9.6.1.101.29.8.18.3 | INTEGER | read-only | The maximum number of trace route probe history entries. |
| INT rsMaxTraceRouteProbeHistoryEntriesAfterReset | 1.3.6.1.4.1.9.6.1.101.29.8.18.4 | INTEGER | read-write | Future maximum number of trace route probe history entries. |
| rsMaxTraceRouteTuning | 1.3.6.1.4.1.9.6.1.101.29.8.18 | |||
| INT rsMaxVlansEntries | 1.3.6.1.4.1.9.6.1.101.29.8.15.1 | INTEGER | read-only | The maximum number of entries in the VLANs table. |
| INT rsMaxVlansEntriesAfterReset | 1.3.6.1.4.1.9.6.1.101.29.8.15.2 | INTEGER | read-write | Future maximal number of entries in the VLANs table. |
| rsMaxVlansTuning | 1.3.6.1.4.1.9.6.1.101.29.8.15 | |||
| rsMultiSession | 1.3.6.1.4.1.9.6.1.101.29.17 | |||
| INT rsMultiSessionMaxSessions | 1.3.6.1.4.1.9.6.1.101.29.17.2 | INTEGER | read-only | The maximum number of terminal sessions (serial, telnet and ssh) available. |
| INT rsMultiSessionMaxSessionsAfterReset | 1.3.6.1.4.1.9.6.1.101.29.17.1 | INTEGER | read-write | The maximum number of terminal sessions (serial, telnet and ssh) available after reset. |
| INT rsRadiusMemoryPoolSize | 1.3.6.1.4.1.9.6.1.101.29.12.2 | INTEGER | read-only | The size of the memory pool that radius uses currently. The memory pool is used for attributes |
| INT rsRadiusMemoryPoolSizeAfterReset | 1.3.6.1.4.1.9.6.1.101.29.12.1 | INTEGER | read-write | The size of the memory pool that radius will allocate after reset. The memory pool is used for attributes |
| rsRadiusTuning | 1.3.6.1.4.1.9.6.1.101.29.12 | |||
| INT rsTcpMemoryPoolSize | 1.3.6.1.4.1.9.6.1.101.29.11.2 | INTEGER | read-only | The size of the memory pool that the tcp uses currently. The memory pool is used for sending packets |
| INT rsTcpMemoryPoolSizeAfterReset | 1.3.6.1.4.1.9.6.1.101.29.11.1 | INTEGER | read-write | The size of the memory pool that the tcp will allocate after reset. The memory pool is used for sending packets |
| rsTcpTuning | 1.3.6.1.4.1.9.6.1.101.29.11 | |||
| rsTunning | 1.3.6.1.4.1.9.6.1.101.29 | The private MIB module definition for switch001 device tuning MIB. |
RFC description
Provides tuning parameters for Cisco Small Business switch performance including priority modes, debug levels, and host diagnostics.
Start monitoring Cisco Small Business managed switch with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.