CISCOSB-Tuning :: rsMaxIpmv6RoutesAfterReset

MIB Reference — IPNetwork Monitor · Updated September 14, 2026

All MIBsCISCOSB-TuningrsMaxIpmv6RoutesAfterReset

rsMaxIpmv6RoutesAfterReset

Module: CISCOSB-Tuning

OID (symbolic): CISCOSB-Tuning::rsMaxIpmv6RoutesAfterReset

OID (numeric): 1.3.6.1.4.1.9.6.1.101.29.8.28.8

Node type: OBJECT-TYPE

Type: INTEGER

Access: read-write

Description: Future Maximal number of IPv6 routers ((*,G) and (S,G)) supported by the IPv6 Multicast Hardware Forwarding Table.

What is rsMaxIpmv6RoutesAfterReset?

This is a read-write INTEGER letting an administrator set a new maximum for IPv6 (*,G) and (S,G) multicast routes in hardware in the IPv6 Multicast Hardware Forwarding Table that only takes effect after the device's next reset, since the live table cannot be resized while running. Changing it lets an admin plan capacity ahead of a scheduled reboot rather than being limited to the currently active ceiling. For example, an admin rolling out IPv6 multicast video beyond that count raises this after-reset value to 256.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.9.6.1.101.29.8.28.8
snmpwalk -v2c -c public <target> CISCOSB-Tuning::rsMaxIpmv6RoutesAfterReset

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.9.6.1.101.29.8.28.8.1
snmpget -v2c -c public <target> CISCOSB-Tuning::rsMaxIpmv6RoutesAfterReset.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.9.6.1.101.29.8.28.8.1 i <value>

SNMPv3 example:

snmpget -v3 -l authPriv -u snmpv3-user -a SHA -A "AuthPassword1" -x AES -X "PrivPassword1" <target> rsMaxIpmv6RoutesAfterReset.1

Start monitoring Cisco Small Business managed switch with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CISCOSB-Tuning::rsMaxIpmv6RoutesAfterReset OID value, configure state conditions and alerts, and monitor any Cisco Small Business managed switch from a single console.

OID Breakdown

Upper-level ancestors (11 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.9ciscoCAT2600-MIB
1.3.6.1.4.1.9.6otherEnterprisesCISCO-SMI
1.3.6.1.4.1.9.6.1ciscoSBCISCO-SMI
1.3.6.1.4.1.9.6.1.101switch001CISCOSB-MIB
1.3.6.1.4.1.9.6.1.101.29rsTunningCISCOSB-MIB
Numeric OIDNameModule
1.3.6.1.4.1.9.6.1.101.29.8rsMaxEntriesTuningCISCOSB-Tuning
1.3.6.1.4.1.9.6.1.101.29.8.28rsMaxIpRoutesTuningCISCOSB-Tuning
1.3.6.1.4.1.9.6.1.101.29.8.28.8rsMaxIpmv6RoutesAfterResetCISCOSB-Tuning