CISCOSB-Tuning :: rsMaxPimInterfaceEntriesAfterReset

MIB Reference — IPNetwork Monitor · Updated September 14, 2026

All MIBsCISCOSB-TuningrsMaxPimInterfaceEntriesAfterReset

rsMaxPimInterfaceEntriesAfterReset

Module: CISCOSB-Tuning

OID (symbolic): CISCOSB-Tuning::rsMaxPimInterfaceEntriesAfterReset

OID (numeric): 1.3.6.1.4.1.9.6.1.101.29.8.12.3.7

Node type: OBJECT-TYPE

Type: INTEGER

Access: read-write

Description: Future maximal number of interfaces in the PIM Interface Table.

What is rsMaxPimInterfaceEntriesAfterReset?

This is a read-only INTEGER reporting the maximum number of interfaces enabled for PIM the PIM Interface Table on this device is currently sized to hold. This is a future-effective read-write setting for how many router interfaces can have pim enabled simultaneously, changing only after the next reset. For example, the reason to care is capacity planning for multicast rollout: an interface not covered by this limit cannot run PIM at all.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.9.6.1.101.29.8.12.3.7
snmpwalk -v2c -c public <target> CISCOSB-Tuning::rsMaxPimInterfaceEntriesAfterReset

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.9.6.1.101.29.8.12.3.7.1
snmpget -v2c -c public <target> CISCOSB-Tuning::rsMaxPimInterfaceEntriesAfterReset.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.9.6.1.101.29.8.12.3.7.1 i <value>

Start monitoring Cisco Small Business managed switch with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CISCOSB-Tuning::rsMaxPimInterfaceEntriesAfterReset OID value, configure state conditions and alerts, and monitor any Cisco Small Business managed switch from a single console.

OID Breakdown

Upper-level ancestors (11 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.9ciscoCAT2600-MIB
1.3.6.1.4.1.9.6otherEnterprisesCISCO-SMI
1.3.6.1.4.1.9.6.1ciscoSBCISCO-SMI
1.3.6.1.4.1.9.6.1.101switch001CISCOSB-MIB
1.3.6.1.4.1.9.6.1.101.29rsTunningCISCOSB-MIB
Numeric OIDNameModule
1.3.6.1.4.1.9.6.1.101.29.8rsMaxEntriesTuningCISCOSB-Tuning
1.3.6.1.4.1.9.6.1.101.29.8.12rsMaxIpmTuningCISCOSB-Tuning
1.3.6.1.4.1.9.6.1.101.29.8.12.3rsMaxPimTuningCISCOSB-Tuning
1.3.6.1.4.1.9.6.1.101.29.8.12.3.7rsMaxPimInterfaceEntriesAfterResetCISCOSB-Tuning