All MIBs › ALCATEL-IND1-TIMETRA-PORT-MIB › tmnxDS1BitErrorInsertionRate
tmnxDS1BitErrorInsertionRate
Module: ALCATEL-IND1-TIMETRA-PORT-MIB
OID (symbolic): ALCATEL-IND1-TIMETRA-PORT-MIB::tmnxDS1BitErrorInsertionRate
OID (numeric): 1.3.6.1.4.1.6527.3.1.2.2.4.12.1.7
Node type: OBJECT-TYPE
Type: Integer32
Access: read-create
Description:
tmnxDS1BitErrorInsertionRate is used to insert bit errors for a BERT test. The number of error corresponds to 10^(-rate). A rate of 7 will cause an error rate of 10^(-7), or 1 error in every 10 million bits transmitted. If the value is set to 0, disables the insertion of bit errors into the BERT. Change in this value while the test is running is accepted but does not take effect until the test gets restarted.
What is tmnxDS1BitErrorInsertionRate?
Sets the rate at which bit errors are deliberately inserted during a BERT test on the DS1 channel, expressed as a negative power of 10 (e.g., a value of 7 means one error per 10 million bits). Setting this to 0 disables error insertion.
OID Breakdown
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | BIANCA-BRICK-PPP-MIB |
| 1.3.6 | dod | BIANCA-BRICK-PPP-MIB |
| 1.3.6.1 | internet | BIANCA-BRICK-PPP-MIB |
| 1.3.6.1.4 | private | BIANCA-BRICK-PPP-MIB |
| 1.3.6.1.4.1 | enterprises | ANIROOT-MIB |
| 1.3.6.1.4.1.6527 | timetra | ALCATEL-IND1-TIMETRA-GLOBAL-MIB |
| 1.3.6.1.4.1.6527.3 | timetraProducts | ALCATEL-IND1-TIMETRA-GLOBAL-MIB |
| 1.3.6.1.4.1.6527.3.1 | tmnxSRMIB | ALCATEL-IND1-TIMETRA-GLOBAL-MIB |
| 1.3.6.1.4.1.6527.3.1.2 | tmnxSRObjs | ALCATEL-IND1-TIMETRA-GLOBAL-MIB |
| 1.3.6.1.4.1.6527.3.1.2.2 | tmnxHwObjs | ALCATEL-IND1-TIMETRA-CHASSIS-MIB |
| 1.3.6.1.4.1.6527.3.1.2.2.4 | tmnxPortObjs | ALCATEL-IND1-TIMETRA-PORT-MIB |
| 1.3.6.1.4.1.6527.3.1.2.2.4.12 | tmnxDS1Table | ALCATEL-IND1-TIMETRA-PORT-MIB |
| 1.3.6.1.4.1.6527.3.1.2.2.4.12.1 | tmnxDS1Entry | ALCATEL-IND1-TIMETRA-PORT-MIB |
| 1.3.6.1.4.1.6527.3.1.2.2.4.12.1.7 | tmnxDS1BitErrorInsertionRate | ALCATEL-IND1-TIMETRA-PORT-MIB |