ALCATEL-IND1-TIMETRA-PORT-MIB :: tmnxSonetReportAlarm

MIB Reference — IPNetwork Monitor

All MIBsALCATEL-IND1-TIMETRA-PORT-MIBtmnxSonetReportAlarm

tmnxSonetReportAlarm

Module: ALCATEL-IND1-TIMETRA-PORT-MIB

OID (symbolic): ALCATEL-IND1-TIMETRA-PORT-MIB::tmnxSonetReportAlarm

OID (numeric): 1.3.6.1.4.1.6527.3.1.2.2.4.5.1.4

Node type: OBJECT-TYPE

Type: Bits

Access: read-write

Description:

The value of tmnxSonetReportAlarm determines when and if to generate tmnxEqPortSonetAlarm and tmnxEqPortSonetAlarmClear notifications for this port: loc(1) Reports a loss of clock which causes the operational state of the port to be downed. Set by default. lais(2) Reports line alarm indication signal errors. Not set by default. lrdi(3) Reports line remote defect initiation errors. LRDIs are caused by remote LOF, LOC, and LOS. Set by default. ss1f(4) Reports section synchronization failure as reported by the S1 byte. Not set by default. sb1err(5) Reports section B1 errors. Not set by default. lb2erSd(6) Reports line signal degradation BER errors. Not set by default. lb2erSf(7) Reports line signal failure BER errors. Set by default. slof(8) Reports section loss of frame errors. Set by default slos(9) Reports section loss of signal errors. Set by default. stxptr(10) Reports a section synchronization error on the transmit side. Indicates if there is a positive or negative justification count per channel. Not set by default. srxptr(11) Reports a section synchronization error on the receive side. Indicates if there is a positive or negative justification count per path. Not set by default. lrei(12) Reports a line error condition raised by the remote as a result of B1 errors received from this node. Not set by default.

What is tmnxSonetReportAlarm?

Controls which SONET alarm conditions (such as loss of clock, line alarm indication signal, or path alarms) will trigger SNMP notifications for this port. Administrators use this to enable or suppress specific alarm traps per port.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.6527.3.1.2.2.4.5.1.4
snmpwalk -v2c -c public <target> ALCATEL-IND1-TIMETRA-PORT-MIB::tmnxSonetReportAlarm

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.6527.3.1.2.2.4.5.1.4.1
snmpget -v2c -c public <target> ALCATEL-IND1-TIMETRA-PORT-MIB::tmnxSonetReportAlarm.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.6527.3.1.2.2.4.5.1.4.1 s <value>

OID Breakdown

Numeric OIDNameModule
1isoLANART-AGENT
1.3orgBIANCA-BRICK-PPP-MIB
1.3.6dodBIANCA-BRICK-PPP-MIB
1.3.6.1internetBIANCA-BRICK-PPP-MIB
1.3.6.1.4privateBIANCA-BRICK-PPP-MIB
1.3.6.1.4.1enterprisesANIROOT-MIB
1.3.6.1.4.1.6527timetraALCATEL-IND1-TIMETRA-GLOBAL-MIB
1.3.6.1.4.1.6527.3timetraProductsALCATEL-IND1-TIMETRA-GLOBAL-MIB
1.3.6.1.4.1.6527.3.1tmnxSRMIBALCATEL-IND1-TIMETRA-GLOBAL-MIB
1.3.6.1.4.1.6527.3.1.2tmnxSRObjsALCATEL-IND1-TIMETRA-GLOBAL-MIB
1.3.6.1.4.1.6527.3.1.2.2tmnxHwObjsALCATEL-IND1-TIMETRA-CHASSIS-MIB
1.3.6.1.4.1.6527.3.1.2.2.4tmnxPortObjsALCATEL-IND1-TIMETRA-PORT-MIB
1.3.6.1.4.1.6527.3.1.2.2.4.5tmnxSonetTableALCATEL-IND1-TIMETRA-PORT-MIB
1.3.6.1.4.1.6527.3.1.2.2.4.5.1tmnxSonetEntryALCATEL-IND1-TIMETRA-PORT-MIB
1.3.6.1.4.1.6527.3.1.2.2.4.5.1.4tmnxSonetReportAlarmALCATEL-IND1-TIMETRA-PORT-MIB