All MIBs › LIEBERT-GP-PDU-MIB
Organization: Emerson Network Power/Liebert Corporation
Last Updated: 2008-07-02
Category: Domain: Power/UPS, Vendor: Liebert
Description: Provides SNMP objects for monitoring and managing Emerson Network Power/Liebert intelligent Power Distribution Units (PDUs).
Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.
What Is LIEBERT-GP-PDU-MIB?
This MIB, from Liebert (Emerson Network Power), provides SNMP objects for monitoring and managing intelligent Power Distribution Units (PDUs) used in data center racks. It exposes tables covering overall PDU group status, per-PDU tables, power supply (line) tables, receptacle/branch tables, and auxiliary sensor counts, giving a comprehensive view of rack-level power distribution hardware. It is directly aimed at monitoring hardware status such as PDU operational/group status, individual power supply line conditions, receptacle-level power delivery, and auxiliary environmental sensors (e.g., temperature/humidity probes attached to the PDU), making it a core hardware-health MIB for data center power infrastructure. As a Liebert enterprise MIB it generally stands alone with standard SNMPv2-SMI conventions rather than depending on other vendor MIBs. It is deployed in data centers and server rooms using Liebert/Emerson intelligent rack PDUs for power monitoring and capacity management. Engineers can download the LIEBERT-GP-PDU-MIB file directly to load it into their MIB browser.
IPNetwork Monitor allows you to monitor SNMP objects defined in LIEBERT-GP-PDU-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.
Supported Devices
- Liebert/Emerson Network Power intelligent rack Power Distribution Units (PDUs)
Monitoring Examples
A facilities team would poll lgpPduGrpSysStatus to get an overall health summary of a group of PDUs, then drill into lgpPduTable and lgpPduPsTable to check individual PDU and power-supply-line status for over-current or fault conditions. The lgpPduRcpTable would be checked for receptacle-level load readings to identify an overloaded outlet, while lgpPduAuxSensorCount indicates how many auxiliary environmental sensors (e.g., temperature probes) are attached and available for polling. A status change in lgpPduRbTable (branch/breaker table) would flag a tripped breaker needing attention.
What Can Be Monitored
- PDU group status
- per-PDU operational status
- power supply line status
- receptacle/branch power and breaker status
- auxiliary sensor count (temperature/humidity)
This MIB depends on
Related MIBs
Imported Objects
From LIEBERT-GP-REGISTRATION-MIB
| lgpPdu | OBJECT-IDENTITY |
| liebertPduModuleReg | OBJECT-IDENTITY |
From SNMPv2-SMI
| Integer32 | |
| MODULE-IDENTITY | |
| OBJECT-IDENTITY | |
| OBJECT-TYPE | |
| Unsigned32 |
From SNMPv2-TC
| DisplayString |
How to Use in IPNetwork Monitor
Example using lgpPduRbEntryPf OID:
Select a Liebert/Emerson power distribution unit as the target host to create a monitor — the SNMP service should be up and running on it. Click New Monitor, then check SNMP Custom on the Favorites tab, click Next, and confirm the host. On the next page, click Select... to open the built-in SNMP MIB Browser and type lgpPduRbEntryPf into the Find box to locate it in the OID tree, selecting the specific row/instance you want to monitor since this is a table column, then select it and click OK. It reports the line-to-neutral Power Factor measurement for this PDU receptacle branch, in hundredths. On the monitor's Main parameters page you can set the target's SNMP port (default 161), credentials, polling interval, and other settings — see the SNMP Monitor help for details. On the State conditions and Alerting tabs, configure when the monitor should change state and trigger an alert; since this is an Integer32-type OID, Value bounds is the most useful condition here — trigger an alert if the power factor drops well below 1.0 (e.g. below 0.85), since a low power factor often indicates an inefficient or unbalanced load. Click Finish to create the monitor; you can adjust any parameter later.
OIDs
| OID symbolic | OID numeric | Type | Access | Description |
|---|---|---|---|---|
| liebertGlobalProductsPduModule | 1.3.6.1.4.1.476.1.42.1.9.1 | The MIB module used to register Liebert POWER related SNMP OIDs. Copyright 2008-2008 Liebert Corporation. All rights reserved. Reproduction of this document is authorized on the condition that the forgoing copyright notice is included. This Specification is supplied 'AS IS' and Liebert Corporation makes no warranty, either express or implied, as to the use, operation, condition, or performance of the Specification. | ||
| lgpPduCluster | 1.3.6.1.4.1.476.1.42.3.8.10 | This sub-tree contains information about PDU clusters. Clusters are groups of PDU's under a single monitoring or control domain. | ||
| U32 lgpPduGrpSysStatus | 1.3.6.1.4.1.476.1.42.3.8.10.5 | Unsigned32 | read-only | This value represents a bit-field of the various operational states of the PDUs that are part of the cluster of PDUs being monitored by this agent. This value is the bit-wise logical OR of all of the 'lgpPduEntrySysStatus' columns in the 'lgpPduTable' which represents the combined statuses of all PDUs for this agent. Note the bit-position is given parenthetically next to the operational state in the description below. The bit position is big-endian (least significant digit is the right-most digit). The state is present in the PDU when the bit is on (value = 1). The value is a logical OR of all of the following potential states of each PDU in the cluster. normalOperation(1) One or more PDUs in the cluster are operating normally with no active warnings or alarms. startUp(2) One or more PDUs are in the startup state (initializing). Control and monitoring operations may be inhibited or unavailable while the PDU is in this state. This state will clear automatically when the PDU(s) are fully initialized and ready to accept control and monitoring commands. unknownNoSupport(4) The state of one or more PDUs are not known at this time or there is no support for this piece of information from 1 or more PDUs in the cluster/group. normalWithWarning(8) One or more PDUs are operating normally with one or more active warnings. Appropriate personnel should investigate the warning(s) as soon as possible and take appropriate action. normalWithAlarm(16) One or more PDUs are operating normally with one or more active alarms. Appropriate personnel should investigate the alarm(s) as soon as possible and take appropriate action. abnormalOperation(32) One ore more PDUs are operating abnormally. There is a failure within the system that is unexpected under normal operating conditions. Appropriate personnel should investigate the cause as soon as possible. The normal functioning of the system is likely inhibited. unknownCommFailure(64) The state of one or more PDUs are not known due to a communications failure between the PDU hardware and the communications module. This state is usually indicative of a hardware problem. |
| U32 lgpPduTableCount | 1.3.6.1.4.1.476.1.42.3.8.19 | Unsigned32 | read-only | Number of PDUs being monitored by this agent. This is the number of entries in the lgpPduTable. |
| lgpPduTable | 1.3.6.1.4.1.476.1.42.3.8.20 | not-accessible | This table contains a list of PDU entries. The table contains zero, one, or many rows, depending upon the number of PDUs being monitored. The Network Management System (NMS) cannot create or delete rows in the table. The rows are created by the agent based upon the number of PDUs being managed. Each row in the table represents a PDU in the system. | |
| lgpPduEntry | 1.3.6.1.4.1.476.1.42.3.8.20.1 | not-accessible | This entry defines the columns to be populated in the 'lgpPduTable'. Each column represents an attribute of a PDU. This table is indexed by the PDU identifier that is unique within the agent. | |
| U32 lgpPduEntryIndex | 1.3.6.1.4.1.476.1.42.3.8.20.1.1 | Unsigned32 | not-accessible | This is the index that indicates the row of the 'lgpPduTable'. |
| U32 lgpPduEntryId | 1.3.6.1.4.1.476.1.42.3.8.20.1.5 | Unsigned32 | read-only | This is an internal index representing a unique identifier for each PDU represented by this agent. The value is assigned by the agent. |
| STR lgpPduEntryUsrLabel | 1.3.6.1.4.1.476.1.42.3.8.20.1.10 | DisplayString | read-write | This is a user assigned label representing the PDU. |
| STR lgpPduEntrySysAssignLabel | 1.3.6.1.4.1.476.1.42.3.8.20.1.15 | DisplayString | read-only | System assigned identifier representing the PDU. The value is independent of any user assigned label or tag. The exact format of this label is system dependent and is subject to change, therefore, it should not be referenced for programmatic use. |
| U32 lgpPduEntryPositionRelative | 1.3.6.1.4.1.476.1.42.3.8.20.1.20 | Unsigned32 | read-only | This is a one-based value that indicates the PDU's relative position within a rack or other enclosing entity. |
| U32 lgpPduEntrySysStatus | 1.3.6.1.4.1.476.1.42.3.8.20.1.25 | Unsigned32 | read-only | This value represents a bit-field of the various operational states of the PDU. The value is a logical OR of all of the following potential states of the PDU. Note the bit-position is given parenthetically next to the operational state in the description below. The bit position is assumed to be a big-endian format (least significant digit is the right-most digit). The state is present in the PDU when the bit is on (value = 1). normalOperation(1) The PDU is operating normally with no active warnings or alarms. startUp(2) The PDU is in the startup state (initializing). Control and monitoring operations maybe inhibited or unavailable while the PDU is in this state. This state will clear automatically when the PDU(s) are fully initialized and ready to accept control and monitoring commands. normalWithWarning(8) The PDU is operating normally with one or more active warnings. Appropriate personnel should investigate the warning(s) as soon as possible and take appropriate action. normalWithAlarm(16) The PDU is operating normally with one or more active alarms. Appropriate personnel should investigate the alarm(s) as soon as possible and take appropriate action. abnormalOperation(32) The PDU is operating abnormally. That is there is some failure within the system that is unexpected under normal operating conditions. Appropriate personnel should investigate the cause as soon as possible. The normal functioning of the system is likely inhibited. |
| STR lgpPduEntryUsrTag1 | 1.3.6.1.4.1.476.1.42.3.8.20.1.35 | DisplayString | read-write | This is a user assigned Tag for the PDU. This value may be useful for end-user grouping or asset tracking purposes. The value for this tag does not need to be unique for this unit or across other units. |
| STR lgpPduEntryUsrTag2 | 1.3.6.1.4.1.476.1.42.3.8.20.1.40 | DisplayString | read-write | This is a user assigned Tag for the PDU. This value may be useful for end-user grouping or asset tracking purposes. The value for this tag does not need to be unique for this unit or across other units. |
| STR lgpPduEntrySerialNumber | 1.3.6.1.4.1.476.1.42.3.8.20.1.45 | DisplayString | read-only | System assigned serial number for this PDU. This number is assigned at time of manufacture, is globally unique with respect to all PDU units. |
| U32 lgpPduEntryRbCount | 1.3.6.1.4.1.476.1.42.3.8.20.1.50 | Unsigned32 | read-only | Number of receptacle branches (Rb) within this PDU. |
| lgpPduPowerSource | 1.3.6.1.4.1.476.1.42.3.8.30 | This sub-tree contains information about PDU power sources. | ||
| U32 lgpPduPsTableCount | 1.3.6.1.4.1.476.1.42.3.8.30.19 | Unsigned32 | read-only | Number of power sources in the lgpPduPsTable. |
| lgpPduPsTable | 1.3.6.1.4.1.476.1.42.3.8.30.20 | not-accessible | This table contains a list of the PDU's power source(s). The table contains zero, one, or more rows, depending upon the number of PDUs being monitored and the number of power sources installed for each PDU. The NMS cannot create or delete rows in the table. The rows are created by the agent based upon the capabilities of the PDUs being monitored. Each row in the table represents a PDU's Power Source. | |
| lgpPduPsEntry | 1.3.6.1.4.1.476.1.42.3.8.30.20.1 | not-accessible | This entry defines the attributes to be populated in the various columns of the 'lgpPduPsTable' (Power Source Table). This table is indexed by both the 'lgpPduEntryIndex' which is the sole index into the 'lgpPduTable' and the 'lgpPduPsEntryIndex' which is a unique identifier for the Power Source within a given PDU. Taken together these two indexes uniquely identify a Power Source within this agent. | |
| U32 lgpPduPsEntryIndex | 1.3.6.1.4.1.476.1.42.3.8.30.20.1.5 | Unsigned32 | not-accessible | This is a unique identifier for the Power Source within a given PDU. This is one of two indexes used to indicate the row of the 'lgpPduTable'. |
| U32 lgpPduPsEntryId | 1.3.6.1.4.1.476.1.42.3.8.30.20.1.10 | Unsigned32 | read-only | This is a unique entry id representing a given PDU power source for the PDU. |
| STR lgpPduPsEntrySysAssignLabel | 1.3.6.1.4.1.476.1.42.3.8.30.20.1.15 | DisplayString | read-only | System assigned identifier for this power source. The value is independent of any user assigned label or tag. The exact format of this label is system dependent and is subject to change, therefore, it should not be referenced for programmatic use. |
| STR lgpPduPsEntryModel | 1.3.6.1.4.1.476.1.42.3.8.30.20.1.20 | DisplayString | read-only | This is the model name (identifier) of the power supply. |
| INT lgpPduPsEntryWiringType | 1.3.6.1.4.1.476.1.42.3.8.30.20.1.25 | INTEGER | read-write | The PDU's power supply physical wiring type. not-specified The type has not been specified/configured. The end_user must configure this object to specify the physical wiring type. single-phase-3-wire-L1-N-PE Single Phase input with 3 wires (Line 1, Neutral and Protective Earth). two-phase-3-wire-L1-L2-PE Two Phase input with 3 wires (Line 1, Line 2, and Protective Earth). three-phase-4-wire-L1-L2-L3-PE Three Phase input with 4 wires (Line 1, Line 2, Line 3, and Protective Earth). three-phase-5-wire-L1-L2-L3-N-PE Three Phase input with 5 wires (Line 1, Line 2, Line 3, Neutral and Protective Earth). two-phase-4-wire-L1-L2-N-PE Two Phase input with 4 wires (Line 1, Line 2, Neutral, and Protective Earth). |
| U32 lgpPduPsEntryEpInputRated | 1.3.6.1.4.1.476.1.42.3.8.30.20.1.30 | Unsigned32 | read-only | Rated Input Line Voltage for the power source (i.e. this is the nominal line input voltage; it is NOT a measured voltage). The value is defined to be the rated line voltage (either line-to-neutral or line-to-line depending upon the power source's type). |
| U32 lgpPduPsEntryEcInputRated | 1.3.6.1.4.1.476.1.42.3.8.30.20.1.35 | Unsigned32 | read-only | This is the rated input line current for the module (it is NOT the measured current). |
| U32 lgpPduPsEntryFreqRated | 1.3.6.1.4.1.476.1.42.3.8.30.20.1.40 | Unsigned32 | read-only | Rated input line frequency for this power source (i.e. This is the expected line frequency; it is NOT a measured frequency; it is typically 50 Hz or 60 Hz). |
| U32 lgpPduPsEntryEnergyAccum | 1.3.6.1.4.1.476.1.42.3.8.30.20.1.50 | Unsigned32 | read-write | Total accumulated energy, measured at the power source input, since the last energy reset. Writing a value of 0 (zero) to this causes the accumulated energy to be reset. Writing a non-zero value is invalid and shall result in a write error and the total energy value remains unchanged. If the energy has not been reset and has not wrapped, then this is the total energy since installation. This value persists across boot events. |
| STR lgpPduPsEntrySerialNum | 1.3.6.1.4.1.476.1.42.3.8.30.20.1.55 | DisplayString | read-only | This is a unique serial number of the power supply. This number is assigned to the power supply at the time of manufacture. |
| STR lgpPduPsEntryFirmwareVersion | 1.3.6.1.4.1.476.1.42.3.8.30.20.1.60 | DisplayString | read-only | This is the version of the firmware installed on the PDU's power supply. |
| U32 lgpPduPsEntryPwrTotal | 1.3.6.1.4.1.476.1.42.3.8.30.20.1.65 | Unsigned32 | read-only | Total input power for this power supply. This is the sum of the power for all phases |
| U32 lgpPduPsEntryEcNeutral | 1.3.6.1.4.1.476.1.42.3.8.30.20.1.70 | Unsigned32 | read-only | The neutral current measured at the PDU's power source. |
| U32 lgpPduPsEntryEcNeutralThrshldOvrWarn | 1.3.6.1.4.1.476.1.42.3.8.30.20.1.75 | Unsigned32 | read-write | The threshold at which an over current warning is activated. If the measured neutral current (lgpPduPsEntryEcNeutral) is above this percentage of the full scale rated value (lgpPduPsEntryEcInputRated), an over neutral current warning (lgpConditionSource1NeutralOverCurrent) is activated. |
| U32 lgpPduPsEntryEcNeutralThrshldOvrAlarm | 1.3.6.1.4.1.476.1.42.3.8.30.20.1.80 | Unsigned32 | read-write | The threshold at which an over current alarm is activated. If the measured neutral current (lgpPduPsEntryEcNeutral) is above this percentage of the full scale rated value (lgpPduPsEntryEcInputRated), an over neutral current alarm (lgpConditionSource1NeutralOverCurrent) is activated. |
| lgpPduPsLineTable | 1.3.6.1.4.1.476.1.42.3.8.30.40 | not-accessible | This table contains a list of PDU's power source line/phase measurements. The table contains zero, one, or many rows, depending upon the number of PDU's Power Sources being monitored. The NMS cannot create or delete rows in the table. The rows are created by the agent based upon the capabilities of the managed PDU's power supply(s). Each row in the table represents a particular phase/line measurement of a power supply for a given PDU. | |
| lgpPduPsLineEntry | 1.3.6.1.4.1.476.1.42.3.8.30.40.1 | not-accessible | This entry defines the attributes to be populated in the various columns of the 'lgpPduPsLineTable'. The table is index by three indexes which taken together uniquely identify line/phase information for a given power source within a PDU. The 'lgpPduEntryIndex' is an index into the 'lgpPduTable'. This identifies the PDU that the power source is on. The 'lgpPduPsEntryIndex' is an index that together with the 'lgpPduEntryIndex' uniquely identifies the power source within the PDU that the row in this table represents. The final index 'lgpPduPsLineEntryIndex' identifies the particular line/phase that the measurement applies to within the identified power source. | |
| U32 lgpPduPsLineEntryIndex | 1.3.6.1.4.1.476.1.42.3.8.30.40.1.5 | Unsigned32 | not-accessible | This is the index that indicates the line/phase of the measurements in the given row of the 'lgpPduPsLineTable'. |
| U32 lgpPduPsLineEntryId | 1.3.6.1.4.1.476.1.42.3.8.30.40.1.10 | Unsigned32 | read-only | Unique identifier (within a PDU) for the PDU's power source. The object may not be available in non-modular systems. |
| INT lgpPduPsLineEntryLine | 1.3.6.1.4.1.476.1.42.3.8.30.40.1.15 | INTEGER | read-only | The line number (phase) that the measurement represents for all measurements in a given row of the table. Note that this always matches the lgpPduPsLineEntryIndex of the same row in the table. The line/phases are as follows: Line# Description ----- --------------------------------------------------- 1 Line 1-N (A) for Line-to-Neutral measurements 2 Line 2-N (B) for Line-to-Neutral measurements 3 Line 3-N (C) for Line-to-Neutral measurements 1 Line 1-2 (A-B) for Line-to-Line measurements 2 Line 2-3 (B-C) for Line-to-Line measurements 3 Line 3-1 (C-A) for Line-to-Line measurements |
| U32 lgpPduPsLineEntryEpLNTenths | 1.3.6.1.4.1.476.1.42.3.8.30.40.1.19 | Unsigned32 | read-only | Alternating Current RMS Line to Neutral Electrical Potential measurement. The line/phase being measured is indicated by the corresponding lgpPduPsLineEntryLine value of this row in the table. |
| U32 lgpPduPsLineEntryEpLN | 1.3.6.1.4.1.476.1.42.3.8.30.40.1.20 | Unsigned32 | read-only | Alternating Current RMS Line to Neutral Electrical Potential measurement. The line/phase being measured is indicated by the corresponding lgpPduPsLineEntryLine value of this row in the table. |
| U32 lgpPduPsLineEntryEc | 1.3.6.1.4.1.476.1.42.3.8.30.40.1.21 | Unsigned32 | read-only | Total input line-to-neutral electrical current. The line/phase being measured is indicated by the corresponding lgpPduPsLineEntryLine value of this row in the table. |
| U32 lgpPduPsLineEntryEcHundredths | 1.3.6.1.4.1.476.1.42.3.8.30.40.1.22 | Unsigned32 | read-only | Total input line-to-neutral electrical current. The line/phase being measured is indicated by the corresponding lgpPduPsLineEntryLine value of this row in the table. |
| U32 lgpPduPsLineEntryEcThrshldUndrAlarm | 1.3.6.1.4.1.476.1.42.3.8.30.40.1.35 | Unsigned32 | read-write | The threshold at which an under current alarm is activated. If the measured current (lgpPduPsLineEntryEc) is equal to or below this percentage of the full scale rated value (lgpPduPsEntryEcInputRated), an under current alarm is activated. |
| U32 lgpPduPsLineEntryEcThrshldOvrWarn | 1.3.6.1.4.1.476.1.42.3.8.30.40.1.36 | Unsigned32 | read-write | The threshold at which an over current warning is activated. If the measured current (lgpPduPsLineEntryEc) is equal to or over this percentage of the full scale rated value (lgpPduPsEntryEcInputRated), an over current warning is activated. |
| U32 lgpPduPsLineEntryEcThrshldOvrAlarm | 1.3.6.1.4.1.476.1.42.3.8.30.40.1.37 | Unsigned32 | read-write | The threshold at which an over current alarm is activated. If the measured current (lgpPduPsLineEntryEc) is equal to or over this percentage of the full scale rated value (lgpPduPsEntryEcInputRated), an over current alarm is activated. |
| U32 lgpPduPsLineEntryEcAvailBeforeAlarm | 1.3.6.1.4.1.476.1.42.3.8.30.40.1.38 | Unsigned32 | read-only | The amount that the current/amperage may increase from its present value before an over current alarm occurs. |
| U32 lgpPduPsLineEntryEcUsedBeforeAlarm | 1.3.6.1.4.1.476.1.42.3.8.30.40.1.39 | Unsigned32 | read-only | The percent of current utilization relative to the over current alarm threshold. |
| U32 lgpPduPsLineEntryEpLL | 1.3.6.1.4.1.476.1.42.3.8.30.40.1.60 | Unsigned32 | read-only | Line to Line Electrical Potential. The line/phase being measured is indicated by the corresponding lgpPduPsLineEntryLine value of this row in the table. |
| U32 lgpPduPsLineEntryEpLLTenths | 1.3.6.1.4.1.476.1.42.3.8.30.40.1.61 | Unsigned32 | read-only | Line to Line Electrical Potential. The line/phase being measured is indicated by the corresponding lgpPduPsLineEntryLine value of this row in the table. |
| U32 lgpPduPsLineEntryEcAvailBeforeAlarmHundredths | 1.3.6.1.4.1.476.1.42.3.8.30.40.1.62 | Unsigned32 | read-only | The amount that the current/amperage may increase from its present value before an over current alarm occurs. |
| lgpPduReceptacleBranch | 1.3.6.1.4.1.476.1.42.3.8.40 | This sub-tree contains information about PDU receptacle branches. | ||
| U32 lgpPduRbTableCount | 1.3.6.1.4.1.476.1.42.3.8.40.19 | Unsigned32 | read-only | Number of receptacle branches in the lgpPduRbTable. |
| lgpPduRbTable | 1.3.6.1.4.1.476.1.42.3.8.40.20 | not-accessible | This table contains a list of PDU Receptacle branches. The table contains zero, one, or many rows, depending upon the number of PDUs being managed and how many receptacle branches each PDU has installed. The NMS cannot create or delete rows in the table. The rows are created by the agent based upon the capabilities of the PDUs being managed. Each row in the table represents a receptacle branch for a given PDU. The PDU that a branch is installed on is indicated by the column lgpPduEntryIndex. The branch within the lgpPduEntryIndex PDU is indicated by the column lgpPduRbEntryIndex. | |
| lgpPduRbEntry | 1.3.6.1.4.1.476.1.42.3.8.40.20.1 | not-accessible | This entry defines the attributes to be populated in the various columns of the 'lgpPduRbTable'. The table is indexed by both the 'lgpPduEntryIndex' and 'lgpPduRbEntryIndex'. The lgpPduEntryIndex specifies the PDU, defined in the lgpPduTable that the branch is on. The lgpPduRbEntryIndex uniquely identifies the branch within that PDU. Taken together the two indexes uniquely identify a branch being monitored by this agent. | |
| U32 lgpPduRbEntryIndex | 1.3.6.1.4.1.476.1.42.3.8.40.20.1.1 | Unsigned32 | not-accessible | This is the index that indicates the row of the 'lgpPduRbTable' |
| U32 lgpPduRbEntryId | 1.3.6.1.4.1.476.1.42.3.8.40.20.1.5 | Unsigned32 | read-only | A unique id representing the receptacle branch within the collection of branches being monitored by this agent. The uniqueness of this id is within the PDUs being managed by a single agent. |
| STR lgpPduRbEntryUsrLabel | 1.3.6.1.4.1.476.1.42.3.8.40.20.1.8 | DisplayString | read-write | A user assigned label representing the receptacle branch. |
| STR lgpPduRbEntrySysAssignLabel | 1.3.6.1.4.1.476.1.42.3.8.40.20.1.20 | DisplayString | read-only | System assigned identifier for this receptacle branch. The value is independent of any user assigned label or tag. The exact format of this label is system dependent and is subject to change, therefore, it should not be referenced for programmatic use. |
| U32 lgpPduRbEntryPositionRelative | 1.3.6.1.4.1.476.1.42.3.8.40.20.1.25 | Unsigned32 | read-only | This is a one-based value that indicates the relative position of the branch within the PDU. |
| STR lgpPduRbEntrySerialNum | 1.3.6.1.4.1.476.1.42.3.8.40.20.1.30 | DisplayString | read-only | A globally unique serial number for this branch. This number is assigned to the branch at the time of manufacture and can not be modified. NOTE: Generally only PDUs with replaceable receptacle branches will have serial numbers. |
| STR lgpPduRbEntryModel | 1.3.6.1.4.1.476.1.42.3.8.40.20.1.35 | DisplayString | read-only | This is the model designation for this receptacle branch. |
| STR lgpPduRbEntryFirmwareVersion | 1.3.6.1.4.1.476.1.42.3.8.40.20.1.40 | DisplayString | read-only | This is the firmware version number of the control software running on the receptacle branch. Only PDUs with replaceable receptacle branches will typically support this object. |
| STR lgpPduRbEntryUsrTag1 | 1.3.6.1.4.1.476.1.42.3.8.40.20.1.41 | DisplayString | read-write | This is a user assigned Tag for the receptacle branch. This value may be useful for end-user grouping or asset tracking purposes. The value for this tag does not need to be unique for this unit or across other units. |
| STR lgpPduRbEntryUsrTag2 | 1.3.6.1.4.1.476.1.42.3.8.40.20.1.42 | DisplayString | read-write | This is a user assigned Tag for the receptacle branch. This value may be useful for end-user grouping or asset tracking purposes. The value for this tag does not need to be unique for this unit or across other units. |
| INT lgpPduRbEntryReceptacleType | 1.3.6.1.4.1.476.1.42.3.8.40.20.1.45 | INTEGER | read-only | This enumeration represents the type of receptacles installed on this receptacle branch. All receptacles on this branch are of this type/style. not-specified If this value is returned, either the receptacle type has not been specified/configured or the agent monitoring this PDU does not have a SNMP enumeration defined to the type. |
| INT lgpPduRbEntryCapabilities | 1.3.6.1.4.1.476.1.42.3.8.40.20.1.50 | INTEGER | read-only | Receptacle branch capabilities describes what an individual branch is capable of. no-optional-capabilities The branch is unable to report measurements and lacks control capabilities. measurement-only The branch is capable of reporting multiple measurements. measurement-and-control The branch is capable of reporting multiple measurements and controlling the state. control-only The branch is capable of controlling the state. current-measurement-only The branch is capable of reporting the current/amperage only. current-measurement-and-control The branch is capable of reporting the current/amperage and has the ability to control the state. |
| INT lgpPduRbEntryLineSource | 1.3.6.1.4.1.476.1.42.3.8.40.20.1.55 | INTEGER | read-only | This represents the line source that is supplying power to this receptacle branch. not-specified The line source supplying power to the load for this receptacle branch has not been specified/configured. line-1-N The load for this receptacle branch is supplied by a line-to-neutral configuration. (line 1 to neutral). line-2-N The load for this receptacle branch is supplied by a line-to-neutral configuration. (line 2 to neutral). line-3-N The load for this receptacle branch is supplied by a line-to-neutral configuration. (line 3 to neutral). line-1-line-2 The load for this receptacle branch is supplied by a line-to-line configuration (line 1 to line 2). line-2-line-3 The load for this receptacle branch is supplied by a line-to-line configuration (line 2 to line 3). line-3-line-1 The load for this receptacle branch is supplied by a line-to-line configuration (line 3 to line 1). line-1-line-2-and-line-1-neutral The load for this mixed receptacle branch is supplied by a line-to-line and line-to-neutral configuration (line 1 to line 2 and line 1 to neutral). line-2-line-3-and-line-2-neutral The load for this mixed receptacle branch is supplied by a line-to-line and line-to-neutral configuration (line 2 to line 3 and line 2 to neutral). line-3-line-1-and-line-3-neutral The load for this mixed receptacle branch is supplied by a line-to-line and line-to-neutral configuration (line 3 to line 1 and line 3 to neutral). unknown-line-neutral The load for this branch is supplied by a line-to-neutral configuration. The system is unable to determine which lines are supporting the load. unknown-line-line The load for this branch is supplied by a line-to-line configuration. The system is unable to determine which lines are supporting the load. |
| U32 lgpPduRbEntryRcpCount | 1.3.6.1.4.1.476.1.42.3.8.40.20.1.60 | Unsigned32 | read-only | The number of receptacles on this receptacle branch. |
| U32 lgpPduRbEntryEpRated | 1.3.6.1.4.1.476.1.42.3.8.40.20.1.70 | Unsigned32 | read-only | Rated Line Voltage for the receptacle branch and its associated receptacles (i.e. This is the nominal line voltage that is available to the connected load; it is NOT a measured voltage.) |
| U32 lgpPduRbEntryEcRated | 1.3.6.1.4.1.476.1.42.3.8.40.20.1.75 | Unsigned32 | read-only | This is the rated input line current for the module (it is NOT the measured current). |
| U32 lgpPduRbEntryFreqRated | 1.3.6.1.4.1.476.1.42.3.8.40.20.1.80 | Unsigned32 | read-only | This is the rated electrical frequency for the receptacle branch and its associated receptacles |
| U32 lgpPduRbEntryEnergyAccum | 1.3.6.1.4.1.476.1.42.3.8.40.20.1.85 | Unsigned32 | read-write | Total accumulated energy, measured at the receptacle branch input, since the last energy reset. Writing a value of 0 (zero) to this causes the accumulated energy to be reset. Writing a non-zero value is invalid and shall result in a write error and the total energy value remains unchanged. If the energy has not been reset and has not wrapped, then this is the total energy since installation. This value persists across boot events. NOTE: Resetting this value does not reset the values for the individual receptacles. |
| U32 lgpPduRbEntryEpLNTenths | 1.3.6.1.4.1.476.1.42.3.8.40.20.1.100 | Unsigned32 | read-only | The line-to-neutral measurement of the Electrical Potential measured in Volts RMS (Root Mean Squared). |
| U32 lgpPduRbEntryPwr | 1.3.6.1.4.1.476.1.42.3.8.40.20.1.115 | Unsigned32 | read-only | The line-to-neutral measurement of the Real Power (Wattage) |
| U32 lgpPduRbEntryAp | 1.3.6.1.4.1.476.1.42.3.8.40.20.1.120 | Unsigned32 | read-only | The line-to-neutral measurement of the Apparent Power (VA) |
| I32 lgpPduRbEntryPfEx | 1.3.6.1.4.1.476.1.42.3.8.40.20.1.125 | Integer32 | read-only | The line-to-neutral measurement of the Power Factor of the receptacle branches' input. |
| U32 lgpPduRbEntryEcHundredths | 1.3.6.1.4.1.476.1.42.3.8.40.20.1.130 | Unsigned32 | read-only | The line-to-neutral measurement of the Electrical Current measured in Amperes RMS (Root Mean Squared). |
| U32 lgpPduRbEntryEcThrshldUndrAlm | 1.3.6.1.4.1.476.1.42.3.8.40.20.1.135 | Unsigned32 | read-write | The threshold at which an under current alarm is activated. If the measured current (lgpPduRbEntryEc) is equal to or below this percentage of the full scale rated value (lgpPduRbEntryEcRated), an under current alarm is activated |
| U32 lgpPduRbEntryEcThrshldOvrWarn | 1.3.6.1.4.1.476.1.42.3.8.40.20.1.140 | Unsigned32 | read-write | The threshold at which an over current warning is activated. If the measured current (lgpPduRbEntryEc) is equal to or over this percentage of the full scale rated value (lgpPduRbEntryEcRated), an over current warning is activated |
| U32 lgpPduRbEntryEcThrshldOvrAlm | 1.3.6.1.4.1.476.1.42.3.8.40.20.1.145 | Unsigned32 | read-write | The threshold at which an over current alarm is activated. If the measured current (lgpPduRbEntryEcLN) is equal to or over this percentage of the full scale rated value (lgpPduRbEntryEcRated), an over current alarm is activated |
| U32 lgpPduRbEntryEcAvailBeforeAlarmHundredths | 1.3.6.1.4.1.476.1.42.3.8.40.20.1.150 | Unsigned32 | read-only | The amount that the current/amperage may increase from its present value before an over current alarm occurs. |
| U32 lgpPduRbEntryEcUsedBeforeAlarm | 1.3.6.1.4.1.476.1.42.3.8.40.20.1.160 | Unsigned32 | read-only | The percent of current utilization relative to the over current alarm threshold. |
| U32 lgpPduRbEntryEpLLTenths | 1.3.6.1.4.1.476.1.42.3.8.40.20.1.170 | Unsigned32 | read-only | The line-to-line measurement of the Electrical Potential measured in Volts RMS (Root Mean Squared). |
| lgpPduRbLineTable | 1.3.6.1.4.1.476.1.42.3.8.40.40 | not-accessible | This table contains a list of PDU receptacle branch line/phase measurements. The table contains zero, one, or many rows, depending upon the number of PDUs and the number of receptacle branches on each PDU that are being monitored. The NMS cannot create or delete rows in the table. The rows are created by the agent based upon the capabilities of the PDU(s) being monitored. Each row in the table represents a particular phase/line measurement of a PDU Receptacle Branch. Rows in the table are uniquely identified by three indexes representing respectively the PDU (lgpPduEntryIndex), the receptacle branch (lgpPduRbEntryIndex) and the line/phase being measured (lgpPduRbLineEntryIndex). | |
| lgpPduRbLineEntry | 1.3.6.1.4.1.476.1.42.3.8.40.40.1 | not-accessible | This entry defines the attributes to be populated in the various columns of the 'lgpPduRbLineTable'. The table is indexed by three indexes. The 'lgpPduEntryIndex' references a PDU in the 'lgpPduTable' to which this receptacle branch line/phase measurement belongs. The 'lgpPduRbEntryIndex' together with the 'lgpPduEntryIndex' references the receptacle branch in the 'lgpPduRbTable'. The 'lgpPduRbLineEntryIndex' represents the line/phase of the measurements in the row of this table. Together these three indexes uniquely identify a phase/line measurement on a receptacle branch within a PDU being monitored by this agent. | |
| U32 lgpPduRbLineEntryIndex | 1.3.6.1.4.1.476.1.42.3.8.40.40.1.1 | Unsigned32 | not-accessible | This is the index that indicates the row of the 'lgpPduRbLineTable' |
| U32 lgpPduRbLineEntryId | 1.3.6.1.4.1.476.1.42.3.8.40.40.1.5 | Unsigned32 | read-only | Runtime assigned branch identifier. |
| INT lgpPduRbLineEntryLine | 1.3.6.1.4.1.476.1.42.3.8.40.40.1.10 | INTEGER | read-only | The line number or phase that the measurement for this receptacle branch represents for each measurement in this row of the table. The phases are as follows: Line# Description ----- --------------------------------------------------- 1 Line 1-N (A) for Line-to-Neutral measurements 2 Line 2-N (B) for Line-to-Neutral measurements 3 Line 3-N (C) for Line-to-Neutral measurements 1 Line 1-2 (A-B) for Line-to-Line measurements 2 Line 2-3 (B-C) for Line-to-Line measurements 3 Line 3-1 (C-A) for Line-to-Line measurements |
| U32 lgpPduRbLineEntryEpLNTenths | 1.3.6.1.4.1.476.1.42.3.8.40.40.1.19 | Unsigned32 | read-only | The line-to-neutral measurement of the Electrical Potential measured in Volts RMS (Root Mean Squared). |
| U32 lgpPduRbLineEntryEpLN | 1.3.6.1.4.1.476.1.42.3.8.40.40.1.20 | Unsigned32 | read-only | The line-to-neutral measurement of the Electrical Potential measured in Volts RMS (Root Mean Squared). |
| U32 lgpPduRbLineEntryEc | 1.3.6.1.4.1.476.1.42.3.8.40.40.1.21 | Unsigned32 | read-only | The line-to-neutral measurement of the Electrical Current measured in Amperes RMS (Root Mean Squared). |
| U32 lgpPduRbLineEntryPwr | 1.3.6.1.4.1.476.1.42.3.8.40.40.1.22 | Unsigned32 | read-only | The line-to-neutral measurement of the Real Power (Wattage) |
| U32 lgpPduRbLineEntryAp | 1.3.6.1.4.1.476.1.42.3.8.40.40.1.23 | Unsigned32 | read-only | The line-to-neutral measurement of the Apparent Power (VA) |
| I32 lgpPduRbLineEntryPf | 1.3.6.1.4.1.476.1.42.3.8.40.40.1.24 | Integer32 | read-only | The line-to-neutral measurement of the Power Factor of the receptacle branches' input. |
| U32 lgpPduRbLineEntryEcHundredths | 1.3.6.1.4.1.476.1.42.3.8.40.40.1.25 | Unsigned32 | read-only | The line-to-neutral measurement of the Electrical Current measured in Amperes RMS (Root Mean Squared). |
| U32 lgpPduRbLineEntryEcThrshldUndrAlm | 1.3.6.1.4.1.476.1.42.3.8.40.40.1.35 | Unsigned32 | read-write | The threshold at which an under current alarm is activated. If the measured current (lgpPduRbLineEntryEc) is equal to or below this percentage of the full scale rated value (lgpPduRbEntryEcRated), an under current alarm is activated |
| U32 lgpPduRbLineEntryEcThrshldOvrWarn | 1.3.6.1.4.1.476.1.42.3.8.40.40.1.36 | Unsigned32 | read-write | The threshold at which an over current warning is activated. If the measured current (lgpPduRbLineEntryEc) is equal to or over this percentage of the full scale rated value (lgpPduRbEntryEcRated), an over current warning is activated |
| U32 lgpPduRbLineEntryEcThrshldOvrAlm | 1.3.6.1.4.1.476.1.42.3.8.40.40.1.37 | Unsigned32 | read-write | The threshold at which an over current alarm is activated. If the measured current (lgpPduRbLineEntryEcLN) is equal to or over this percentage of the full scale rated value (lgpPduRbEntryEcRated), an over current alarm is activated |
| U32 lgpPduRbLineEntryEcAvailBeforeAlarmHundredths | 1.3.6.1.4.1.476.1.42.3.8.40.40.1.39 | Unsigned32 | read-only | The amount that the current/amperage may increase from its present value before an over current alarm occurs. |
| U32 lgpPduRbLineEntryEcAvailBeforeAlarm | 1.3.6.1.4.1.476.1.42.3.8.40.40.1.40 | Unsigned32 | read-only | The amount that the current/amperage may increase from its present value before an over current alarm occurs. |
| U32 lgpPduRbLineEntryEcUsedBeforeAlarm | 1.3.6.1.4.1.476.1.42.3.8.40.40.1.41 | Unsigned32 | read-only | The percent of current utilization relative to the over current alarm threshold. |
| U32 lgpPduRbLineEntryEpLL | 1.3.6.1.4.1.476.1.42.3.8.40.40.1.60 | Unsigned32 | read-only | The line-to-line measurement of the Electrical Potential measured in Volts RMS (Root Mean Squared). |
| U32 lgpPduRbLineEntryEpLLTenths | 1.3.6.1.4.1.476.1.42.3.8.40.40.1.61 | Unsigned32 | read-only | The line-to-line measurement of the Electrical Potential measured in Volts RMS (Root Mean Squared). |
| lgpPduReceptacle | 1.3.6.1.4.1.476.1.42.3.8.50 | This sub-tree contains information about PDU receptacles. | ||
| U32 lgpPduRcpTableCount | 1.3.6.1.4.1.476.1.42.3.8.50.19 | Unsigned32 | read-only | Number of receptacles in the lgpPduRcpTable. |
| lgpPduRcpTable | 1.3.6.1.4.1.476.1.42.3.8.50.20 | not-accessible | This table contains a list of PDU receptacle entries. The table contains numerous rows representing an individual receptacle, depending upon the number and configuration of the PDU(s) being monitored by the agent. The NMS cannot create or delete rows in the table. The rows are created by the agent based upon the capabilities of the managed PDU(s). Each row in the table represents a receptacle in the system. | |
| lgpPduRcpEntry | 1.3.6.1.4.1.476.1.42.3.8.50.20.1 | not-accessible | This entry defines the attributes to be populated in the various columns of the 'lgpPduRcpTable'. This table is indexed by three indexes. The 'lgpPduEntryIndex' references a PDU in the 'lgpPduTable' that a given row in this table represents. The 'lgpPduRbEntryIndex' together with the 'lgpPduEntryIndex' specifies a row in the 'lgpPduRbTable' that the receptacle belongs. The 'lgpPduRcpEntryIndex' identifies the particular receptacle within the branch. | |
| U32 lgpPduRcpEntryIndex | 1.3.6.1.4.1.476.1.42.3.8.50.20.1.1 | Unsigned32 | not-accessible | This is the index that indicates the receptacle position on the receptacle branch. This along with the other two indexes on the lgpPduRcpTable uniquely identify the receptacle in this table. |
| U32 lgpPduRcpEntryId | 1.3.6.1.4.1.476.1.42.3.8.50.20.1.5 | Unsigned32 | read-only | A runtime assigned receptacle identification number. |
| STR lgpPduRcpEntryUsrLabel | 1.3.6.1.4.1.476.1.42.3.8.50.20.1.10 | DisplayString | read-write | User assigned label for this receptacle. |
| STR lgpPduRcpEntryUsrTag1 | 1.3.6.1.4.1.476.1.42.3.8.50.20.1.15 | DisplayString | read-write | User assigned Tag to assist in identifying or grouping this receptacle within the end-users domain. |
| STR lgpPduRcpEntryUsrTag2 | 1.3.6.1.4.1.476.1.42.3.8.50.20.1.20 | DisplayString | read-write | User assigned Tag to assist in identifying or grouping this receptacle within the end-users domain. |
| STR lgpPduRcpEntrySysAssignLabel | 1.3.6.1.4.1.476.1.42.3.8.50.20.1.25 | DisplayString | read-only | System assigned identifier representing the receptacle. The value is independent of any user assigned label or tag. The exact format of this label is system dependent and is subject to change, therefore, it should not be referenced for programmatic use. |
| U32 lgpPduRcpEntryPosition | 1.3.6.1.4.1.476.1.42.3.8.50.20.1.30 | Unsigned32 | read-only | A number representing the position of the receptacle within the receptacle branch. |
| INT lgpPduRcpEntryType | 1.3.6.1.4.1.476.1.42.3.8.50.20.1.40 | INTEGER | read-only | The type or form of receptacle. The enumerations are specified in well-known industry standard terms and abbreviations. |
| INT lgpPduRcpEntryLineSource | 1.3.6.1.4.1.476.1.42.3.8.50.20.1.45 | INTEGER | read-only | This represents the line source that is supplying power to this receptacle. not-specified The line source supplying power to the load for this receptacle has not been specified/configured. line-1-N The load for this receptacle is supplied by a line-to-neutral configuration. (line 1 to neutral). line-2-N The load for this receptacle is supplied by a line-to-neutral configuration. (line 2 to neutral). line-3-N The load for this receptacle is supplied by a line-to-neutral configuration. (line 3 to neutral). line-1-line-2 The load for this receptacle is supplied by a line-to-line configuration (line 1 to line 2). line-2-line-3 The load for this receptacle is supplied by a line-to-line configuration (line 2 to line 3). line-3-line-1 The load for this receptacle is supplied by a line-to-line configuration (line 3 to line 1). unknown-line-neutral The load for this receptacle is supplied by a line-to-neutral configuration. The system is unable to determine which lines are supporting the load. unknown-line-line The load for this receptacle is supplied by a line-to-line configuration. The system is unable to determine which lines are supporting the load. |
| INT lgpPduRcpEntryCapabilities | 1.3.6.1.4.1.476.1.42.3.8.50.20.1.50 | INTEGER | read-only | Receptacle capabilities describes what an individual receptacle is capable of. no-optional-capabilities The receptacle is unable to report measurements and lacks control capabilities. measurement-only The receptacle is capable of reporting multiple measurements. measurement-and-control The receptacle is capable of reporting multiple measurements and controlling the state. control-only The receptacle is capable of controlling the state. current-measurement-only The receptacle is capable of reporting the current/amperage only. current-measurement-and-control The receptacle is capable of reporting the current/amperage and has the ability to control the state. |
| U32 lgpPduRcpEntryEp | 1.3.6.1.4.1.476.1.42.3.8.50.20.1.55 | Unsigned32 | read-only | Voltage being delivered to the load attached to the receptacle. Alternating Current RMS Electrical Potential measurement. |
| U32 lgpPduRcpEntryEpTenths | 1.3.6.1.4.1.476.1.42.3.8.50.20.1.56 | Unsigned32 | read-only | Voltage being delivered to the load attached to the receptacle. Alternating Current RMS Electrical Potential measurement. |
| U32 lgpPduRcpEntryEc | 1.3.6.1.4.1.476.1.42.3.8.50.20.1.60 | Unsigned32 | read-only | Current (amperage) being delivered to the load attached to the receptacle. Electrical Current is measured in Amperes RMS (Root Mean Squared). |
| U32 lgpPduRcpEntryEcHundredths | 1.3.6.1.4.1.476.1.42.3.8.50.20.1.61 | Unsigned32 | read-only | Current (amperage) being delivered to the load attached to the receptacle. Electrical Current is measured in Amperes RMS (Root Mean Squared). |
| U32 lgpPduRcpEntryPwrOut | 1.3.6.1.4.1.476.1.42.3.8.50.20.1.65 | Unsigned32 | read-only | Real Power (watts) being delivered to the load attached to the receptacle. |
| U32 lgpPduRcpEntryApOut | 1.3.6.1.4.1.476.1.42.3.8.50.20.1.70 | Unsigned32 | read-only | Apparent Power (volt-amps) being delivered to the load attached to the receptacle. |
| U32 lgpPduRcpEntryPf | 1.3.6.1.4.1.476.1.42.3.8.50.20.1.75 | Unsigned32 | read-only | Receptacle Power Factor, which is the ratio of real power to apparent power (i.e. ratio of watts to volts-amps). |
| U32 lgpPduRcpEntryFreq | 1.3.6.1.4.1.476.1.42.3.8.50.20.1.80 | Unsigned32 | read-only | The measured line frequency being delivered to the load attached to the receptacle. |
| U32 lgpPduRcpEntryEnergyAccum | 1.3.6.1.4.1.476.1.42.3.8.50.20.1.85 | Unsigned32 | read-write | Total accumulated energy, measured at the module input, since the last energy reset. Writing a value of 0 (zero) to this causes the accumulated energy to be reset. Writing a non-zero value is invalid and shall result in a write error and the total energy value remains unchanged. If the energy has not been reset and has not wrapped, then this is the total energy since installation. This value persists across boot events. |
| U32 lgpPduRcpEntryPwrOnDelay | 1.3.6.1.4.1.476.1.42.3.8.50.20.1.90 | Unsigned32 | read-write | The amount of time to wait before power is applied to the receptacle after a power strip is turned on or rebooted. This can be used to stagger the powering of multiple receptacles in order to prevent a large initial current draw. |
| INT lgpPduRcpEntryPwrState | 1.3.6.1.4.1.476.1.42.3.8.50.20.1.95 | INTEGER | read-only | unknown The current power state is unknown. off The current power state of the receptacle is OFF. on The current power state of the receptacle is ON. off-pending-on-delay The current power state of the receptacle is OFF. The power will be ON at the expiration of the ON delay of this receptacle. |
| INT lgpPduRcpEntryControl | 1.3.6.1.4.1.476.1.42.3.8.50.20.1.100 | INTEGER | read-write | This object represents the current and persistent (configured) power state of the receptacle. The receptacle can also be controlled by writing to this object. off The current and persisted (configured) power state of the receptacle is 'off'. When writing 'off' to this object the receptacle, if ON, will be turned OFF and its persistent (configured) power state will be set to 'off'. on The current and persisted (configured) power state of the receptacle is 'on'. When writing 'on' to this object the receptacle, if 'off', will be turned 'on' and its persistent (configured) power state will be set to 'on'. cycle-power The receptacle is currently in a power-cycle state. The power to the receptacle is being turned off momentarily and will then revert to being 'on'. When writing 'cycle-power' to this OBJECT if the receptacle is 'on' it will be momentarily turned 'off' and then revert to the 'on' state. The receptacle's persistent (configured) power state will be left unchanged ('on'). If the receptacle is OFF writing cycle-power has no affect on the receptacle. |
| INT lgpPduRcpEntryControlLock | 1.3.6.1.4.1.476.1.42.3.8.50.20.1.105 | INTEGER | read-write | This object represents the locked state of the receptacle. unknown The lock state of the receptacle is not known at this time. locked If the receptacle is 'locked' then its current persisted (configured) state can not be changed. unlocked If the receptacle is 'unlocked', then a user with proper permissions may change the receptacles state. |
| U32 lgpPduRcpEntryEcThrshldUnderAlarm | 1.3.6.1.4.1.476.1.42.3.8.50.20.1.150 | Unsigned32 | read-write | The threshold at which an under current alarm is activated. If the measured current (lgpPduRbLineEntryEcLL) is equal to or below this percentage of the full scale rated value (lgpPduRbEntryEcRated), an under current alarm is activated |
| U32 lgpPduRcpEntryEcThrshldOverWarn | 1.3.6.1.4.1.476.1.42.3.8.50.20.1.151 | Unsigned32 | read-write | The threshold at which an over current warning is activated. If the measured current (lgpPduRbLineEntryEcLL) is equal to or over this percentage of the full scale rated value (lgpPduRbEntryEcRated), an over current warning is activated |
| U32 lgpPduRcpEntryEcThrshldOverAlarm | 1.3.6.1.4.1.476.1.42.3.8.50.20.1.152 | Unsigned32 | read-write | The threshold at which an over current alarm is activated. If the measured current (lgpPduRbLineEntryEcLL) is equal to or over this percentage of the full scale rated value (lgpPduRbEntryEcRated), an over current alarm is activated |
| U32 lgpPduRcpEntryEcAvailBeforeAlarmHundredths | 1.3.6.1.4.1.476.1.42.3.8.50.20.1.159 | Unsigned32 | read-only | The amount that the current/amperage may increase from its present value before an over current alarm occurs. |
| U32 lgpPduRcpEntryEcAvailBeforeAlarm | 1.3.6.1.4.1.476.1.42.3.8.50.20.1.160 | Unsigned32 | read-only | The amount that the current/amperage may increase from its present value before an over current alarm occurs. |
| U32 lgpPduRcpEntryEcUsedBeforeAlarm | 1.3.6.1.4.1.476.1.42.3.8.50.20.1.161 | Unsigned32 | read-only | The percent of current utilization relative to the over current alarm threshold. |
| U32 lgpPduRcpEntryEcCrestFactor | 1.3.6.1.4.1.476.1.42.3.8.50.20.1.162 | Unsigned32 | read-only | Receptacle current crest factor, which is the peak amplitude of the current waveform divided by the RMS value of the waveform. |
| INT lgpPduRcpEntryBlinkLED | 1.3.6.1.4.1.476.1.42.3.8.50.20.1.200 | INTEGER | read-write | Blink the receptacle LED. Writing blinkLED(2) will cause the LED to blink for a predefined duration of time. Reading this object will always return noAction(1). |
| lgpPduAuxiliarySensors | 1.3.6.1.4.1.476.1.42.3.8.60 | This sub-tree contains information about PDU Auxiliary Sensors. | ||
| U32 lgpPduAuxSensorCount | 1.3.6.1.4.1.476.1.42.3.8.60.5 | Unsigned32 | read-only | Number of auxiliary sensors in the lgpPduAuxSensorTable. |
| lgpPduAuxSensorTable | 1.3.6.1.4.1.476.1.42.3.8.60.10 | not-accessible | This table contains a list of the PDU's Auxiliary Sensors. The table contains zero, one, or more rows, depending upon the number of PDUs being monitored and the number of auxiliary sensors installed for each PDU. The NMS cannot create or delete rows in the table. The rows are created by the agent based upon the capabilities of the PDUs being monitored. Each row in the table represents an auxiliary sensor in a PDU. | |
| lgpPduAuxSensorEntry | 1.3.6.1.4.1.476.1.42.3.8.60.10.1 | not-accessible | This entry defines the attributes to be populated in the various columns of the 'lgpPduAuxSensorTable'. This table is indexed by both the 'lgpPduEntryIndex' which is the sole index into the 'lgpPduTable' and the 'lgpPduAuxSensorIndex'which is a unique identifier for the auxiliary sensor attached to the given PDU. Taken together these two indexes uniquely identify an Auxiliary Sensor within this agent. | |
| U32 lgpPduAuxSensorIndex | 1.3.6.1.4.1.476.1.42.3.8.60.10.1.1 | Unsigned32 | not-accessible | This is the index indicating the nth element of the table. |
| INT lgpPduAuxSensorMeasType | 1.3.6.1.4.1.476.1.42.3.8.60.10.1.5 | INTEGER | read-only | not-specified The type of sensor is unknown. temperature The sensor in this row of the table measures temperature. humidity The sensor in this row of the table measures relative humidity. temperature-and-humidity The sensor in this row of the table measures both temperature and relative humidity. |
| U32 lgpPduAuxSensorId | 1.3.6.1.4.1.476.1.42.3.8.60.10.1.10 | Unsigned32 | read-only | System assigned auxiliary sensor identification number. The value assigned is product specific. |
| STR lgpPduAuxSensorSysAssignLabel | 1.3.6.1.4.1.476.1.42.3.8.60.10.1.15 | DisplayString | read-only | Label assigned to the auxiliary sensor at runtime by the system. The value is independent of any user assigned label or asset tag. |
| U32 lgpPduAuxSensorPositionRelative | 1.3.6.1.4.1.476.1.42.3.8.60.10.1.20 | Unsigned32 | read-only | Auxiliary sensor relative position. This is a one-based value that indicates the sensor's position relative to the sensor string connector. |
| STR lgpPduAuxSensorUsrLabel | 1.3.6.1.4.1.476.1.42.3.8.60.10.1.25 | DisplayString | read-write | User assigned auxiliary sensor label. |
| STR lgpPduAuxSensorUsrTag1 | 1.3.6.1.4.1.476.1.42.3.8.60.10.1.30 | DisplayString | read-write | User assigned Tag to assist in identifying or grouping this auxiliary sensor within the end-users domain. |
| STR lgpPduAuxSensorUsrTag2 | 1.3.6.1.4.1.476.1.42.3.8.60.10.1.35 | DisplayString | read-write | User assigned Tag to assist in identifying or grouping this auxiliary sensor within the end-users domain. |
| STR lgpPduAuxSensorTempSerialNum | 1.3.6.1.4.1.476.1.42.3.8.60.10.1.40 | DisplayString | read-only | The temperature sensor's globally unique serial number assigned at the time of manufacture. |
| STR lgpPduAuxSensorHumSerialNum | 1.3.6.1.4.1.476.1.42.3.8.60.10.1.45 | DisplayString | read-only | The humidity sensor's globally unique serial number assigned at the time of manufacture. |
| I32 lgpPduAuxSensorTempMeasurementDegF | 1.3.6.1.4.1.476.1.42.3.8.60.10.1.50 | Integer32 | read-only | Temperature measured at the temperature sensor reported in degrees Fahrenheit. |
| I32 lgpPduAuxSensorTempThrshldUndrAlmDegF | 1.3.6.1.4.1.476.1.42.3.8.60.10.1.55 | Integer32 | read-write | Under temperature alarm threshold. An alarm is activated if the temperature is equal to or below this value. |
| I32 lgpPduAuxSensorTempThrshldOvrAlmDegF | 1.3.6.1.4.1.476.1.42.3.8.60.10.1.60 | Integer32 | read-write | Over temperature alarm threshold. An alarm is activated if the temperature is equal to or above this value. |
| I32 lgpPduAuxSensorTempThrshldUndrWarnDegF | 1.3.6.1.4.1.476.1.42.3.8.60.10.1.65 | Integer32 | read-write | Under temperature warning threshold. A warning is activated if the temperature is equal to or below this value. |
| I32 lgpPduAuxSensorTempThrshldOvrWarnDegF | 1.3.6.1.4.1.476.1.42.3.8.60.10.1.70 | Integer32 | read-write | Over temperature warning threshold. A warning is activated if the temperature is equal to or above this value. |
| I32 lgpPduAuxSensorTempMeasurementDegC | 1.3.6.1.4.1.476.1.42.3.8.60.10.1.75 | Integer32 | read-only | Temperature measured at the temperature sensor reported in degrees Celsius. |
| I32 lgpPduAuxSensorTempThrshldUndrAlmDegC | 1.3.6.1.4.1.476.1.42.3.8.60.10.1.80 | Integer32 | read-write | Under temperature alarm threshold. An alarm is activated if the temperature is equal to or below this value. |
| I32 lgpPduAuxSensorTempThrshldOvrAlmDegC | 1.3.6.1.4.1.476.1.42.3.8.60.10.1.85 | Integer32 | read-write | Over temperature alarm threshold. An alarm is activated if the temperature is equal to or above this value. |
| I32 lgpPduAuxSensorTempThrshldUndrWarnDegC | 1.3.6.1.4.1.476.1.42.3.8.60.10.1.90 | Integer32 | read-write | Under temperature warning threshold. A warning is activated if the temperature is equal to or below this value. |
| I32 lgpPduAuxSensorTempThrshldOvrWarnDegC | 1.3.6.1.4.1.476.1.42.3.8.60.10.1.95 | Integer32 | read-write | Over temperature warning threshold. A warning is activated if the temperature is equal to or above this value. |
| U32 lgpPduAuxSensorHumMeasurement | 1.3.6.1.4.1.476.1.42.3.8.60.10.1.100 | Unsigned32 | read-only | Relative Humidity measured at the humidity sensor. |
| U32 lgpPduAuxSensorHumThrshldUndrAlm | 1.3.6.1.4.1.476.1.42.3.8.60.10.1.105 | Unsigned32 | read-write | Under relative humidity alarm threshold. An alarm is activated if the relative humidity is equal to or below this value. |
| U32 lgpPduAuxSensorHumThrshldOvrAlm | 1.3.6.1.4.1.476.1.42.3.8.60.10.1.110 | Unsigned32 | read-write | Over relative humidity alarm threshold. An alarm is activated if the relative humidity is equal to or above this value. |
| U32 lgpPduAuxSensorHumThrshldUndrWarn | 1.3.6.1.4.1.476.1.42.3.8.60.10.1.115 | Unsigned32 | read-write | Under relative humidity warning threshold. A warning is activated if the relative humidity is equal to or below this value. |
| U32 lgpPduAuxSensorHumThrshldOvrWarn | 1.3.6.1.4.1.476.1.42.3.8.60.10.1.120 | Unsigned32 | read-write | Over relative humidity warning threshold. A warning is activated if the relative humidity is equal to or above this value. |
| lgpPduAuxMeasTable | 1.3.6.1.4.1.476.1.42.3.8.60.15 | not-accessible | This table contains a list of the PDU's Auxiliary Sensor Measurements. The table contains zero, one, or more rows, depending upon the number of PDUs being monitored, the number of auxiliary sensors installed for each PDU, and the number of measurements within each sensor. The NMS cannot create or delete rows in the table. The rows are created by the agent based upon the capabilities of the PDUs being monitored. Each row in the table represents an auxiliary sensor measurement in a PDU. | |
| lgpPduAuxMeasEntry | 1.3.6.1.4.1.476.1.42.3.8.60.15.1 | not-accessible | This entry defines the attributes to be populated in the various columns of the 'lgpPduAuxMeasTable'. This table is indexed by 'lgpPduEntryIndex' which is the sole index into the 'lgpPduTable', 'lgpPduAuxSensorIndex' which is a unique identifier for the auxiliary sensor attached to the given PDU, and 'lgpPduAuxMeasSensorMeasurementIndex' which is the measurement's index identified on the sensor. Taken together these three indexes uniquely identify an Auxiliary Sensor Measurement within this agent. | |
| U32 lgpPduAuxMeasSensorIndex | 1.3.6.1.4.1.476.1.42.3.8.60.15.1.1 | Unsigned32 | not-accessible | This is the index indicating the sensor the measurement is accessed from. |
| U32 lgpPduAuxMeasSensorMeasurementIndex | 1.3.6.1.4.1.476.1.42.3.8.60.15.1.5 | Unsigned32 | not-accessible | This is the measurement's index identified on the sensor. |
| INT lgpPduAuxMeasType | 1.3.6.1.4.1.476.1.42.3.8.60.15.1.10 | INTEGER | read-only | not-specified The type of measurement is unknown. temperature The measurement in this row of the table measures temperature. humidity The measurement in this row of the table measures relative humidity. door-closure The measurement in this row of the table measures the state of a door. contact-closure The measurement in this row of the table measures the state of a contact closure. |
| STR lgpPduAuxMeasSensorSysAssignLabel | 1.3.6.1.4.1.476.1.42.3.8.60.15.1.15 | DisplayString | read-only | Label assigned to the auxiliary sensor at runtime by the system. The value is independent of any user assigned label or asset tag. |
| STR lgpPduAuxMeasUsrLabel | 1.3.6.1.4.1.476.1.42.3.8.60.15.1.20 | DisplayString | read-write | User assigned auxiliary sensor measurement label. |
| STR lgpPduAuxMeasUsrTag1 | 1.3.6.1.4.1.476.1.42.3.8.60.15.1.25 | DisplayString | read-write | User assigned Tag to assist in identifying or grouping this auxiliary sensor measurement within the end-users domain. |
| STR lgpPduAuxMeasUsrTag2 | 1.3.6.1.4.1.476.1.42.3.8.60.15.1.30 | DisplayString | read-write | User assigned Tag to assist in identifying or grouping this auxiliary sensor measurement within the end-users domain. |
| STR lgpPduAuxMeasSensorSerialNum | 1.3.6.1.4.1.476.1.42.3.8.60.15.1.35 | DisplayString | read-only | The sensor's globally unique serial number assigned at the time of manufacture. |
| I32 lgpPduAuxMeasTempDegF | 1.3.6.1.4.1.476.1.42.3.8.60.15.1.40 | Integer32 | read-only | Temperature measured at the temperature sensor reported in degrees Fahrenheit. |
| I32 lgpPduAuxMeasTempThrshldUndrAlmDegF | 1.3.6.1.4.1.476.1.42.3.8.60.15.1.50 | Integer32 | read-write | Under temperature alarm threshold. An alarm is activated if the temperature is equal to or below this value. |
| I32 lgpPduAuxMeasTempThrshldOvrAlmDegF | 1.3.6.1.4.1.476.1.42.3.8.60.15.1.55 | Integer32 | read-write | Over temperature alarm threshold. An alarm is activated if the temperature is equal to or above this value. |
| I32 lgpPduAuxMeasTempThrshldUndrWarnDegF | 1.3.6.1.4.1.476.1.42.3.8.60.15.1.60 | Integer32 | read-write | Under temperature warning threshold. A warning is activated if the temperature is equal to or below this value. |
| I32 lgpPduAuxMeasTempThrshldOvrWarnDegF | 1.3.6.1.4.1.476.1.42.3.8.60.15.1.65 | Integer32 | read-write | Over temperature warning threshold. A warning is activated if the temperature is equal to or above this value. |
| I32 lgpPduAuxMeasTempDegC | 1.3.6.1.4.1.476.1.42.3.8.60.15.1.70 | Integer32 | read-only | Temperature measured at the temperature sensor reported in degrees Celsius. |
| I32 lgpPduAuxMeasTempThrshldUndrAlmDegC | 1.3.6.1.4.1.476.1.42.3.8.60.15.1.75 | Integer32 | read-write | Under temperature alarm threshold. An alarm is activated if the temperature is equal to or below this value. |
| I32 lgpPduAuxMeasTempThrshldOvrAlmDegC | 1.3.6.1.4.1.476.1.42.3.8.60.15.1.80 | Integer32 | read-write | Over temperature alarm threshold. An alarm is activated if the temperature is equal to or above this value. |
| I32 lgpPduAuxMeasTempThrshldUndrWarnDegC | 1.3.6.1.4.1.476.1.42.3.8.60.15.1.85 | Integer32 | read-write | Under temperature warning threshold. A warning is activated if the temperature is equal to or below this value. |
| I32 lgpPduAuxMeasTempThrshldOvrWarnDegC | 1.3.6.1.4.1.476.1.42.3.8.60.15.1.90 | Integer32 | read-write | Over temperature warning threshold. A warning is activated if the temperature is equal to or above this value. |
| U32 lgpPduAuxMeasHum | 1.3.6.1.4.1.476.1.42.3.8.60.15.1.95 | Unsigned32 | read-only | Relative Humidity measured at the humidity sensor. |
| U32 lgpPduAuxMeasHumThrshldUndrAlm | 1.3.6.1.4.1.476.1.42.3.8.60.15.1.100 | Unsigned32 | read-write | Under relative humidity alarm threshold. An alarm is activated if the relative humidity is equal to or below this value. |
| U32 lgpPduAuxMeasHumThrshldOvrAlm | 1.3.6.1.4.1.476.1.42.3.8.60.15.1.105 | Unsigned32 | read-write | Over relative humidity alarm threshold. An alarm is activated if the relative humidity is equal to or above this value. |
| U32 lgpPduAuxMeasHumThrshldUndrWarn | 1.3.6.1.4.1.476.1.42.3.8.60.15.1.110 | Unsigned32 | read-write | Under relative humidity warning threshold. A warning is activated if the relative humidity is equal to or below this value. |
| U32 lgpPduAuxMeasHumThrshldOvrWarn | 1.3.6.1.4.1.476.1.42.3.8.60.15.1.115 | Unsigned32 | read-write | Over relative humidity warning threshold. A warning is activated if the relative humidity is equal to or above this value. |
| INT lgpPduAuxMeasDrClosureState | 1.3.6.1.4.1.476.1.42.3.8.60.15.1.120 | INTEGER | read-only | The state of a door sensor measurement. not-specified The door state is unknown. open The door is in the open state. closed The door is in the closed state. |
| INT lgpPduAuxMeasDrClosureConfig | 1.3.6.1.4.1.476.1.42.3.8.60.15.1.125 | INTEGER | read-write | Configure door state alarms. This object provides the ability to select when a door closure measurement should cause an alarm. disabled The door state will never result in alarm. alarm-when-open Activate an alarm when the door state becomes open. |
| INT lgpPduAuxMeasCntctClosureState | 1.3.6.1.4.1.476.1.42.3.8.60.15.1.130 | INTEGER | read-only | The state of a contact closure sensor measurement. not-specified The contact closure state is unknown. open The contact closure is in the open state. closed The contact closure is in the closed state. |
| INT lgpPduAuxMeasCntctClosureConfig | 1.3.6.1.4.1.476.1.42.3.8.60.15.1.135 | INTEGER | read-write | Configure contact closure state alarms. This object provides the ability to select when a contact closure measurement should activate an alarm. disabled The contact closure state will never result in alarm. alarm-when-open Activate an alarm when the contact closure state becomes open. alarm-when-closed Activate an alarm when the contact closure state becomes closed. |
RFC description
Liebert power distribution unit (PDU) MIB for managing PDU clusters and group system status.
Start monitoring Liebert/Emerson power distribution units with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.