LIEBERT-GP-FLEXIBLE-CONDITIONS-MIB

All MIBs › LIEBERT-GP-FLEXIBLE-CONDITIONS-MIB

Organization: Liebert Corporation

Last Updated: 2016-06-08

Category: Domain: Power/UPS, Vendor: Liebert

Description: Objects for flexible threshold and alarm conditions covering Liebert GlobalProducts UPS and power management equipment.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is LIEBERT-GP-FLEXIBLE-CONDITIONS-MIB?

LIEBERT-GP-FLEXIBLE-CONDITIONS-MIB is a vendor-specific MIB from Liebert (a Vertiv brand) supporting UPS and power/environmental management equipment, providing a 'flexible conditions' framework that lets the device register a variable, well-known set of threshold-driven alarm conditions rather than a fixed hardcoded list. Its data category is fundamentally faults/alarms and environmental threshold configuration, since flexible-condition MIBs are used by power/cooling equipment to expose whichever sensor-derived alarm states (e.g., over-temperature, battery status, voltage out of range) are relevant to that specific product model. Its core monitoring use is hardware status tracking of the UPS/power system: administrators rely on this mechanism to be alerted to conditions such as battery health issues, temperature excursions, or power quality problems without needing a MIB revision for every new alarm type the product line introduces. It is part of Liebert's broader GP (GlobalProducts) MIB family and works alongside other Liebert MIB modules (e.g., core UPS/environmental MIBs) that define the actual sensor objects these conditions reference. It is typically deployed on Liebert/Vertiv UPS systems, precision cooling units, and power distribution equipment in data centers and telecom facilities where proactive power/environmental alarming is essential. Network engineers evaluating or troubleshooting this functionality can download the LIEBERT-GP-FLEXIBLE-CONDITIONS-MIB file directly to load it into their MIB browser.

IPNetwork Monitor allows you to monitor SNMP objects defined in LIEBERT-GP-FLEXIBLE-CONDITIONS-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

Liebert (Vertiv) UPS system
Liebert precision power/cooling equipment

Monitoring Examples

The only concretely named object available, lgpFlexConditionsWellKnown, represents the registration point for the set of known flexible alarm conditions the device supports; specific per-condition status objects are generated under this framework rather than hardcoded in the MIB itself. An administrator would use the flexible conditions structure to discover and monitor whichever alarm conditions (e.g., a battery fault or over-temperature condition) that particular Liebert unit exposes, but the exact runtime object names depend on the device model and are not enumerated in the available sample data.

What Can Be Monitored

registered flexible alarm/condition types
threshold-based alarm state

Imported Objects

From LIEBERT-GP-CONDITIONS-MIB

lgpFlexConditions

OBJECT-IDENTITY

From LIEBERT-GP-REGISTRATION-MIB

liebertFlexibleConditionsModuleReg

OBJECT-IDENTITY

From SNMPv2-SMI

MODULE-IDENTITY
OBJECT-IDENTITY

OIDs

OID symbolic	OID numeric	Description
liebertGlobalProductsFlexibleConditionsModule	1.3.6.1.4.1.476.1.42.1.11.1	The MIB module used to register Liebert SNMP OIDs. Copyright 2000-2016 Liebert Corporation. All rights reserved. Reproduction of this document is authorized on the condition that the forgoing copyright notice is included. This Specification is supplied 'AS IS' and Liebert Corporation makes no warranty, either express or implied, as to the use, operation, condition, or performance of the Specification.
lgpFlexConditionsWellKnown	1.3.6.1.4.1.476.1.42.3.2.7.1
lgpCondId4122SystemInputPowerProblem	1.3.6.1.4.1.476.1.42.3.2.7.1.4122	The input is not qualified to provide power to the system.
lgpCondId4132BypassOverloadPhaseA	1.3.6.1.4.1.476.1.42.3.2.7.1.4132	An overload exists on output phase A while operating on the bypass.
lgpCondId4133BypassOverloadPhaseB	1.3.6.1.4.1.476.1.42.3.2.7.1.4133	An overload exists on output phase B while operating on the bypass.
lgpCondId4134BypassOverloadPhaseC	1.3.6.1.4.1.476.1.42.3.2.7.1.4134	An overload exists on output phase C while operating on the bypass.
lgpCondId4135BypassNotAvailable	1.3.6.1.4.1.476.1.42.3.2.7.1.4135	A problem associated with the bypass has been detected.
lgpCondId4137BypassAutoRetransferPrimed	1.3.6.1.4.1.476.1.42.3.2.7.1.4137	Automatic retransfer from bypass to inverter is possible.
lgpCondId4138BypassAutoRetransferFailed	1.3.6.1.4.1.476.1.42.3.2.7.1.4138	After performing a recoverable transfer to bypass, an attempt to auto retransfer from bypass to inverter failed.
lgpCondId4139BypassExcessAutoRetransfers	1.3.6.1.4.1.476.1.42.3.2.7.1.4139	The number of auto retransfers, from bypass to inverter, has exceeded the maximum for a specified time interval.
lgpCondId4140BypassRestartInhibitExternal	1.3.6.1.4.1.476.1.42.3.2.7.1.4140	Restart of the bypass is inhibited by the state of an external signal.
lgpCondId4141BypassBreakerClosed	1.3.6.1.4.1.476.1.42.3.2.7.1.4141	The bypass breaker is closed.
lgpCondId4142BypassStaticSwitchOverload	1.3.6.1.4.1.476.1.42.3.2.7.1.4142	Bypass off due to static switch overload.
lgpCondId4143BypassStaticSwitchUnavailable	1.3.6.1.4.1.476.1.42.3.2.7.1.4143	The static bypass is unavailable to support the critical load.
lgpCondId4144BypassExcessivePulseParallel	1.3.6.1.4.1.476.1.42.3.2.7.1.4144	The system has performed too many pulse parallel operations within a specified time interval.
lgpCondId4145BypassAutoTransferFailed	1.3.6.1.4.1.476.1.42.3.2.7.1.4145	An automatic transfer to static bypass failed.
lgpCondId4146SystemInputPhsRotationError	1.3.6.1.4.1.476.1.42.3.2.7.1.4146	The power conductors on the input line are not wired to the UPS in the sequence preferred for the rectifier (A-B-C).
lgpCondId4147SystemInputCurrentLimit	1.3.6.1.4.1.476.1.42.3.2.7.1.4147	The RMS input current has reached the input current limit threshold.
lgpCondId4162BatteryLow	1.3.6.1.4.1.476.1.42.3.2.7.1.4162	The calculated battery time remaining has reached the low battery threshold.
lgpCondId4163OutputOffEndofDischarge	1.3.6.1.4.1.476.1.42.3.2.7.1.4163	Output turned off due to battery reaching end-of-discharge.
lgpCondId4164BatteryChargingError	1.3.6.1.4.1.476.1.42.3.2.7.1.4164	The battery is not charging properly.
lgpCondId4165BatteryChargingReducedExtrnl	1.3.6.1.4.1.476.1.42.3.2.7.1.4165	Using a reduced battery charging algorithm due to an external signal.
lgpCondId4166BatteryCapacityLow	1.3.6.1.4.1.476.1.42.3.2.7.1.4166	Battery capacity is low.
lgpCondId4167OutputOff	1.3.6.1.4.1.476.1.42.3.2.7.1.4167	Output is off.
lgpCondId4168BatteryDischarging	1.3.6.1.4.1.476.1.42.3.2.7.1.4168	The battery is discharging.
lgpCondId4169BatteryTemperatureImbalance	1.3.6.1.4.1.476.1.42.3.2.7.1.4169	Excessive temperature differences between battery sensors detected.
lgpCondId4170BatteryEqualize	1.3.6.1.4.1.476.1.42.3.2.7.1.4170	The rectifier output voltage is increased to equalize the battery voltage level.
lgpCondId4171BatteryManualTestInProgress	1.3.6.1.4.1.476.1.42.3.2.7.1.4171	Manual battery test is in progress.
lgpCondId4172BatteryAutoTestInProgress	1.3.6.1.4.1.476.1.42.3.2.7.1.4172	Automatic battery test is in progress.
lgpCondId4173MainBatteryDisconnectOpen	1.3.6.1.4.1.476.1.42.3.2.7.1.4173	Main battery disconnect is open.
lgpCondId4174BatteryTemperatureSensorFault	1.3.6.1.4.1.476.1.42.3.2.7.1.4174	A battery temperature sensor fault has been detected.
lgpCondId4175BypassFrequencyError	1.3.6.1.4.1.476.1.42.3.2.7.1.4175	The bypass frequency is outside the inverter synchronization limits.
lgpCondId4176BatteryCircuitBreaker1Open	1.3.6.1.4.1.476.1.42.3.2.7.1.4176	Battery circuit breaker 1 is open.
lgpCondId4177BatteryBreaker1OpenFailure	1.3.6.1.4.1.476.1.42.3.2.7.1.4177	Battery circuit breaker 1 failed to open.
lgpCondId4178BatteryBreaker1CloseFailure	1.3.6.1.4.1.476.1.42.3.2.7.1.4178	Battery circuit breaker 1 failed to close.
lgpCondId4179BatteryCircuitBreaker2Open	1.3.6.1.4.1.476.1.42.3.2.7.1.4179	Battery circuit breaker 2 is open.
lgpCondId4180BatteryBreaker2OpenFailure	1.3.6.1.4.1.476.1.42.3.2.7.1.4180	Battery circuit breaker 2 failed to open.
lgpCondId4181BatteryBreaker2CloseFailure	1.3.6.1.4.1.476.1.42.3.2.7.1.4181	Battery circuit breaker 2 failed to close.
lgpCondId4182BatteryCircuitBreaker3Open	1.3.6.1.4.1.476.1.42.3.2.7.1.4182	Battery circuit breaker 3 is open.
lgpCondId4183BatteryBreaker3OpenFailure	1.3.6.1.4.1.476.1.42.3.2.7.1.4183	Battery circuit breaker 3 failed to open.
lgpCondId4184BatteryBreaker3CloseFailure	1.3.6.1.4.1.476.1.42.3.2.7.1.4184	Battery circuit breaker 3 failed to close.
lgpCondId4185BatteryCircuitBreaker4Open	1.3.6.1.4.1.476.1.42.3.2.7.1.4185	Battery circuit breaker 4 is open.
lgpCondId4186BatteryBreaker4OpenFailure	1.3.6.1.4.1.476.1.42.3.2.7.1.4186	Battery circuit breaker 4 failed to open.
lgpCondId4187BatteryBreaker4CloseFailure	1.3.6.1.4.1.476.1.42.3.2.7.1.4187	Battery circuit breaker 4 failed to close.
lgpCondId4188BatteryCircuitBreaker5Open	1.3.6.1.4.1.476.1.42.3.2.7.1.4188	Battery circuit breaker 5 is open.
lgpCondId4189BatteryBreaker5OpenFailure	1.3.6.1.4.1.476.1.42.3.2.7.1.4189	Battery circuit breaker 5 failed to open.
lgpCondId4190BatteryBreaker5CloseFailure	1.3.6.1.4.1.476.1.42.3.2.7.1.4190	Battery circuit breaker 5 failed to close.
lgpCondId4191BatteryCircuitBreaker6Open	1.3.6.1.4.1.476.1.42.3.2.7.1.4191	Battery circuit breaker 6 is open.
lgpCondId4192BatteryBreaker6OpenFailure	1.3.6.1.4.1.476.1.42.3.2.7.1.4192	Battery circuit breaker 6 failed to open.
lgpCondId4193BatteryBreaker6CloseFailure	1.3.6.1.4.1.476.1.42.3.2.7.1.4193	Battery circuit breaker 6 failed to close.
lgpCondId4194BatteryCircuitBreaker7Open	1.3.6.1.4.1.476.1.42.3.2.7.1.4194	Battery circuit breaker 7 is open.
lgpCondId4195BatteryBreaker7OpenFailure	1.3.6.1.4.1.476.1.42.3.2.7.1.4195	Battery circuit breaker 7 failed to open.
lgpCondId4196BatteryBreaker7CloseFailure	1.3.6.1.4.1.476.1.42.3.2.7.1.4196	Battery circuit breaker 7 failed to close.
lgpCondId4197BatteryCircuitBreaker8Open	1.3.6.1.4.1.476.1.42.3.2.7.1.4197	Battery circuit breaker 8 is open.
lgpCondId4198BatteryBreaker8OpenFailure	1.3.6.1.4.1.476.1.42.3.2.7.1.4198	Battery circuit breaker 8 failed to open.
lgpCondId4199BatteryBreaker8CloseFailure	1.3.6.1.4.1.476.1.42.3.2.7.1.4199	Battery circuit breaker 8 failed to close.
lgpCondId4200BatteryChargingInhibited	1.3.6.1.4.1.476.1.42.3.2.7.1.4200	Battery charging is inhibited due to an external inhibit signal.
lgpCondId4213SystemShutdownEPO	1.3.6.1.4.1.476.1.42.3.2.7.1.4213	System shutdown due to Emergency Power Off (EPO).
lgpCondId4214SystemShutdownREPO	1.3.6.1.4.1.476.1.42.3.2.7.1.4214	System shutdown due to Remote Emergency Power Off (REPO).
lgpCondId4215SystemOutputOff	1.3.6.1.4.1.476.1.42.3.2.7.1.4215	The system output is off.
lgpCondId4216BypassBackfeedDetected	1.3.6.1.4.1.476.1.42.3.2.7.1.4216	The system detected a voltage on the bypass when none was expected.
lgpCondId4217BypassManualXfrInhibited	1.3.6.1.4.1.476.1.42.3.2.7.1.4217	Manual transfer from inverter to bypass is inhibited - bypass not qualified.
lgpCondId4218BypassManualRexfrInhibited	1.3.6.1.4.1.476.1.42.3.2.7.1.4218	Manual transfer from bypass to inverter is inhibited - inverter output not qualified.
lgpCondId4219BatteryOverTemperature	1.3.6.1.4.1.476.1.42.3.2.7.1.4219	A battery temperature sensor is reporting a value above a threshold.
lgpCondId4220BatteryExternalMonitor1	1.3.6.1.4.1.476.1.42.3.2.7.1.4220	External battery monitor 1 - battery maintenance required.
lgpCondId4221BatteryExternalMonitor2	1.3.6.1.4.1.476.1.42.3.2.7.1.4221	External battery monitor 2 - battery maintenance required.
lgpCondId4222BatteryGroundFault	1.3.6.1.4.1.476.1.42.3.2.7.1.4222	Battery system ground fault amperage exceeds the threshold.
lgpCondId4229EmergencyPowerOffLatched	1.3.6.1.4.1.476.1.42.3.2.7.1.4229	System output is off - 'Emergency Power Off (EPO) - latched' requires manual reset.
lgpCondId4230SystemOutputLowPowerFactor	1.3.6.1.4.1.476.1.42.3.2.7.1.4230	The system output power factor is low, resulting in reduced output capacity.
lgpCondId4231OutputCurrentExceedsThreshold	1.3.6.1.4.1.476.1.42.3.2.7.1.4231	Output current for one or more phases exceeds a threshold.
lgpCondId4233InverterFailure	1.3.6.1.4.1.476.1.42.3.2.7.1.4233	Inverter failure - inverter output is off.
lgpCondId4234InverterOverloadPhaseA	1.3.6.1.4.1.476.1.42.3.2.7.1.4234	Inverter is operating with an overload on phase A.
lgpCondId4235InverterOverloadPhaseB	1.3.6.1.4.1.476.1.42.3.2.7.1.4235	Inverter is operating with an overload on phase B.
lgpCondId4236InverterOverloadPhaseC	1.3.6.1.4.1.476.1.42.3.2.7.1.4236	Inverter is operating with an overload on phase C.
lgpCondId4237InverterInhibitExternal	1.3.6.1.4.1.476.1.42.3.2.7.1.4237	Restart of the inverter is inhibited by an external signal.
lgpCondId4238InverterOutBreakerOpenFail	1.3.6.1.4.1.476.1.42.3.2.7.1.4238	Inverter output breaker failed to open.
lgpCondId4239InverterOutBreakerCloseFail	1.3.6.1.4.1.476.1.42.3.2.7.1.4239	Inverter output breaker failed to close.
lgpCondId4270InputContact01	1.3.6.1.4.1.476.1.42.3.2.7.1.4270	The external input contact 1.
lgpCondId4271InputContact02	1.3.6.1.4.1.476.1.42.3.2.7.1.4271	The external input contact 2.
lgpCondId4272InputContact03	1.3.6.1.4.1.476.1.42.3.2.7.1.4272	The external input contact 3.
lgpCondId4273InputContact04	1.3.6.1.4.1.476.1.42.3.2.7.1.4273	The external input contact 4.
lgpCondId4274InputContact05	1.3.6.1.4.1.476.1.42.3.2.7.1.4274	The external input contact 5.
lgpCondId4275InputContact06	1.3.6.1.4.1.476.1.42.3.2.7.1.4275	The external input contact 6.
lgpCondId4276InputContact07	1.3.6.1.4.1.476.1.42.3.2.7.1.4276	The external input contact 7.
lgpCondId4277InputContact08	1.3.6.1.4.1.476.1.42.3.2.7.1.4277	The external input contact 8.
lgpCondId4278InputContact09	1.3.6.1.4.1.476.1.42.3.2.7.1.4278	The external input contact 9.
lgpCondId4279InputContact10	1.3.6.1.4.1.476.1.42.3.2.7.1.4279	The external input contact 10.
lgpCondId4280InputContact11	1.3.6.1.4.1.476.1.42.3.2.7.1.4280	The external input contact 11.
lgpCondId4281InputContact12	1.3.6.1.4.1.476.1.42.3.2.7.1.4281	The external input contact 12.
lgpCondId4282InputContact13	1.3.6.1.4.1.476.1.42.3.2.7.1.4282	The external input contact 13.
lgpCondId4283InputContact14	1.3.6.1.4.1.476.1.42.3.2.7.1.4283	The external input contact 14.
lgpCondId4284InputContact15	1.3.6.1.4.1.476.1.42.3.2.7.1.4284	The external input contact 15.
lgpCondId4285InputContact16	1.3.6.1.4.1.476.1.42.3.2.7.1.4285	The external input contact 16.
lgpCondId4286OutputAmpOverUserLimitPhsA	1.3.6.1.4.1.476.1.42.3.2.7.1.4286	The phase A output has exceeded the user amperage threshold.
lgpCondId4287OutputAmpOverUserLimitPhsB	1.3.6.1.4.1.476.1.42.3.2.7.1.4287	The phase B output has exceeded the user amperage threshold.
lgpCondId4288OutputAmpOverUserLimitPhsC	1.3.6.1.4.1.476.1.42.3.2.7.1.4288	The phase C output has exceeded the user amperage threshold.
lgpCondId4289InverterTransferInhibitExt	1.3.6.1.4.1.476.1.42.3.2.7.1.4289	Transfer of critical bus source to inverter is inhibited by an external signal.
lgpCondId4290InverterShutdownOverload	1.3.6.1.4.1.476.1.42.3.2.7.1.4290	The inverter has shutdown due to a sustained overload.
lgpCondId4294InletAirOverTemperature	1.3.6.1.4.1.476.1.42.3.2.7.1.4294	The inlet air exceeds the maximum temperature threshold.
lgpCondId4295RectifierFailure	1.3.6.1.4.1.476.1.42.3.2.7.1.4295	Rectifier failure - rectifier is off.
lgpCondId4296RectifierOperationInhibitExt	1.3.6.1.4.1.476.1.42.3.2.7.1.4296	The operation of the rectifier is inhibited by an external signal.
lgpCondId4297UPSOutputonInverter	1.3.6.1.4.1.476.1.42.3.2.7.1.4297	The output power is supplied by the inverter.
lgpCondId4298UPSOutputonBypass	1.3.6.1.4.1.476.1.42.3.2.7.1.4298	The output power is supplied by the bypass.
lgpCondId4299OutputLoadonMaintBypass	1.3.6.1.4.1.476.1.42.3.2.7.1.4299	The output power is supplied by the maintenance bypass.
lgpCondId4300InternalCommunicationsFailure	1.3.6.1.4.1.476.1.42.3.2.7.1.4300	The control has detected a communication failure of a component on the internal communication bus.
lgpCondId4308DCBusGroundFaultPositive	1.3.6.1.4.1.476.1.42.3.2.7.1.4308	A ground fault has been detected on the positive DC Bus link.
lgpCondId4309DCBusGroundFaultNegative	1.3.6.1.4.1.476.1.42.3.2.7.1.4309	A ground fault has been detected on the negative DC Bus link.
lgpCondId4310EquipmentOverTemperature	1.3.6.1.4.1.476.1.42.3.2.7.1.4310	Equipment over temperature summary event.
lgpCondId4311SystemFanFailure	1.3.6.1.4.1.476.1.42.3.2.7.1.4311	System fan failure - one or more fans have failed.
lgpCondId4313PasswordChanged	1.3.6.1.4.1.476.1.42.3.2.7.1.4313	Password changed.
lgpCondId4314PowerSupplyFailure	1.3.6.1.4.1.476.1.42.3.2.7.1.4314	Power supply failure.
lgpCondId4315OnGenerator	1.3.6.1.4.1.476.1.42.3.2.7.1.4315	A generator is supplying the power to the system.
lgpCondId4316AutoRestartInProgress	1.3.6.1.4.1.476.1.42.3.2.7.1.4316	Auto restart is in progress.
lgpCondId4317AutoRestartInhibitedExt	1.3.6.1.4.1.476.1.42.3.2.7.1.4317	Auto restart inhibited due to an external signal.
lgpCondId4320InitiatedTransfertoBypass	1.3.6.1.4.1.476.1.42.3.2.7.1.4320	User initiated manual transfer to bypass.
lgpCondId4321InitiatedTransfertoInverter	1.3.6.1.4.1.476.1.42.3.2.7.1.4321	User initiated manual transfer to inverter.
lgpCondId4322BatteryTestPassed	1.3.6.1.4.1.476.1.42.3.2.7.1.4322	Battery test passed.
lgpCondId4323BatteryTestFailed	1.3.6.1.4.1.476.1.42.3.2.7.1.4323	Battery test failed.
lgpCondId4324BatteryTestManuallyStopped	1.3.6.1.4.1.476.1.42.3.2.7.1.4324	The battery test was manually stopped prior to completion.
lgpCondId4325BackfeedBreakerOpen	1.3.6.1.4.1.476.1.42.3.2.7.1.4325	The backfeed breaker is in the open position.
lgpCondId4341VelocityAuthenticationFailure	1.3.6.1.4.1.476.1.42.3.2.7.1.4341	Notification of a message rejected by Velocity due to an authentication failure.
lgpCondId4360ReceptacleOverCurrent	1.3.6.1.4.1.476.1.42.3.2.7.1.4360	The system has detected a receptacle over current condition.
lgpCondId4361ReceptacleUnderCurrent	1.3.6.1.4.1.476.1.42.3.2.7.1.4361	The system has detected a receptacle under current condition.
lgpCondId4382SystemInputCurrentImbalance	1.3.6.1.4.1.476.1.42.3.2.7.1.4382	System Input Currents are Imbalanced.
lgpCondId4383BypassStaticSwitchOffExtrnl	1.3.6.1.4.1.476.1.42.3.2.7.1.4383	Bypass static switch is off due to the state of an external signal.
lgpCondId4384BatteryEoDDisconnect	1.3.6.1.4.1.476.1.42.3.2.7.1.4384	Battery disconnect due to end-of-discharge.
lgpCondId4389SystemOutputFault	1.3.6.1.4.1.476.1.42.3.2.7.1.4389	A fault has been detected in the system output.
lgpCondId4390InverterOffExternal	1.3.6.1.4.1.476.1.42.3.2.7.1.4390	Inverter is off (operation is inhibited) due to external signal state.
lgpCondId4391InverterStaticSwitchSCRShort	1.3.6.1.4.1.476.1.42.3.2.7.1.4391	The system has detected a short across one or more inverter static switch Silicon Controlled Rectifiers (SCR).
lgpCondId4392TemperatureSensorError	1.3.6.1.4.1.476.1.42.3.2.7.1.4392	One or more temperature sensors cannot provide a valid temperature reading (i.e. sensor failure, wiring failure, sense circuit failure, etc).
lgpCondId4406BranchOverCurrent	1.3.6.1.4.1.476.1.42.3.2.7.1.4406	The system has detected a module over current condition.
lgpCondId4407BranchUnderCurrent	1.3.6.1.4.1.476.1.42.3.2.7.1.4407	The system has detected a module under current condition.
lgpCondId4416BranchOverCurrent	1.3.6.1.4.1.476.1.42.3.2.7.1.4416	The system has detected a module over current condition.
lgpCondId4417BranchUnderCurrent	1.3.6.1.4.1.476.1.42.3.2.7.1.4417	The system has detected a module under current condition.
lgpCondId4421BranchFailure	1.3.6.1.4.1.476.1.42.3.2.7.1.4421	One or more conditions indicate a Branch Receptacle Module failure , service is required.
lgpCondId4436PDUOverCurrent	1.3.6.1.4.1.476.1.42.3.2.7.1.4436	The system has detected a module over current condition.
lgpCondId4437PDUUnderCurrent	1.3.6.1.4.1.476.1.42.3.2.7.1.4437	The system has detected a module under current condition.
lgpCondId4438SystemInternalTemperatureRise	1.3.6.1.4.1.476.1.42.3.2.7.1.4438	Excessive temperature rise internal to the system (i.e. difference between the output versus input temperature is too large).
lgpCondId4439AutomaticRestartFailed	1.3.6.1.4.1.476.1.42.3.2.7.1.4439	Automatic restart failed.
lgpCondId4440FuseFailure	1.3.6.1.4.1.476.1.42.3.2.7.1.4440	A summary event indicating one or more fuse failures.
lgpCondId4441SystemControllerError	1.3.6.1.4.1.476.1.42.3.2.7.1.4441	System controller internal error.
lgpCondId4442SystemBreakersOpenFailure	1.3.6.1.4.1.476.1.42.3.2.7.1.4442	One or more breakers in the system failed to open.
lgpCondId4448PDUOverCurrent	1.3.6.1.4.1.476.1.42.3.2.7.1.4448	The system has detected a module over current condition.
lgpCondId4449PDUUnderCurrent	1.3.6.1.4.1.476.1.42.3.2.7.1.4449	The system has detected a module under current condition.
lgpCondId4468PDUOverCurrentL1	1.3.6.1.4.1.476.1.42.3.2.7.1.4468	The system has detected a module over current condition on line 1.
lgpCondId4469PDUOverCurrentL2	1.3.6.1.4.1.476.1.42.3.2.7.1.4469	The system has detected a module over current condition on line 2.
lgpCondId4470PDUOverCurrentL3	1.3.6.1.4.1.476.1.42.3.2.7.1.4470	The system has detected a module over current condition on line 3.
lgpCondId4471PDUUnderCurrentL1	1.3.6.1.4.1.476.1.42.3.2.7.1.4471	The system has detected a module under current condition on line 1.
lgpCondId4472PDUUnderCurrentL2	1.3.6.1.4.1.476.1.42.3.2.7.1.4472	The system has detected a module under current condition on line 2.
lgpCondId4473PDUUnderCurrentL3	1.3.6.1.4.1.476.1.42.3.2.7.1.4473	The system has detected a module under current condition on line 3.
lgpCondId4492ReceptaclePowerStateOn	1.3.6.1.4.1.476.1.42.3.2.7.1.4492	The receptacle power state changed to the ON state.
lgpCondId4493ReceptaclePowerStateOff	1.3.6.1.4.1.476.1.42.3.2.7.1.4493	The receptacle power state changed to the OFF state.
lgpCondId4494BranchBreakerOpen	1.3.6.1.4.1.476.1.42.3.2.7.1.4494	The Branch Receptacle Module's input breaker is open.
lgpCondId4495DeviceConfigurationChange	1.3.6.1.4.1.476.1.42.3.2.7.1.4495	Device Configuration Change.
lgpCondId4496BasicDisplayModuleRemoved	1.3.6.1.4.1.476.1.42.3.2.7.1.4496	Basic Display Module Removed.
lgpCondId4497BasicDisplayModuleDiscovered	1.3.6.1.4.1.476.1.42.3.2.7.1.4497	Basic Display Module Discovered.
lgpCondId4500PDUOverCurrent	1.3.6.1.4.1.476.1.42.3.2.7.1.4500	The system has detected a power module over current condition.
lgpCondId4501PDUUnderCurrent	1.3.6.1.4.1.476.1.42.3.2.7.1.4501	The system has detected a power module under current condition.
lgpCondId4502PDUFailure	1.3.6.1.4.1.476.1.42.3.2.7.1.4502	One or more conditions indicate a power module failure, service is required.
lgpCondId4503PDUCommunicationFail	1.3.6.1.4.1.476.1.42.3.2.7.1.4503	Internal communications failure with the Power Module.
lgpCondId4504BranchRemoved	1.3.6.1.4.1.476.1.42.3.2.7.1.4504	Branch Receptacle Module Removed.
lgpCondId4505BranchDiscovered	1.3.6.1.4.1.476.1.42.3.2.7.1.4505	Branch Receptacle Module Discovered.
lgpCondId4506BranchOverCurrent	1.3.6.1.4.1.476.1.42.3.2.7.1.4506	The system has detected a Branch Receptacle Module over current condition.
lgpCondId4507BranchCurrent	1.3.6.1.4.1.476.1.42.3.2.7.1.4507	The system has detected a Branch Receptacle Module under current condition.
lgpCondId4508ReceptacleLoadRemoved	1.3.6.1.4.1.476.1.42.3.2.7.1.4508	The receptacle's load stopped drawing power.
lgpCondId4509ReceptacleLoadAdded	1.3.6.1.4.1.476.1.42.3.2.7.1.4509	The receptacle's load started to draw power.
lgpCondId4523ModuleRemoved	1.3.6.1.4.1.476.1.42.3.2.7.1.4523	Module Removed.
lgpCondId4524ModuleAdded	1.3.6.1.4.1.476.1.42.3.2.7.1.4524	Module Added.
lgpCondId4550FirmwareUpdateRequired	1.3.6.1.4.1.476.1.42.3.2.7.1.4550	Module compatibility error requires a system firmware update to resolve.
lgpCondId4551GenericTestEvent	1.3.6.1.4.1.476.1.42.3.2.7.1.4551	A generic test event designed to evaluate system handling of events.
lgpCondId4580OverTemperature	1.3.6.1.4.1.476.1.42.3.2.7.1.4580	An over temperature condition was detected.
lgpCondId4581UnderTemperature	1.3.6.1.4.1.476.1.42.3.2.7.1.4581	An under temperature condition was detected.
lgpCondId4588OverRelativeHumidity	1.3.6.1.4.1.476.1.42.3.2.7.1.4588	An over relative humidity condition was detected.
lgpCondId4589UnderRelativeHumidity	1.3.6.1.4.1.476.1.42.3.2.7.1.4589	An under relative humidity condition was detected.
lgpCondId4601ExternalAirSensorAOverTemperature	1.3.6.1.4.1.476.1.42.3.2.7.1.4601	[Ext Air Sensor A Temperature] has exceeded [External Air Over Temp Threshold].
lgpCondId4604ExternalAirSensorBOverTemperature	1.3.6.1.4.1.476.1.42.3.2.7.1.4604	[Ext Air Sensor B Temperature] has exceeded [External Air Over Temp Threshold].
lgpCondId4608ExtAirSensorAUnderTemperature	1.3.6.1.4.1.476.1.42.3.2.7.1.4608	[Ext Air Sensor A Temperature] has dropped below [Ext Air Under Temp Threshold].
lgpCondId4611ExtAirSensorBUnderTemperature	1.3.6.1.4.1.476.1.42.3.2.7.1.4611	[Ext Air Sensor B Temperature] has dropped below [Ext Air Under Temp Threshold].
lgpCondId4615ExtDewPointOverTemperature	1.3.6.1.4.1.476.1.42.3.2.7.1.4615	At least one dew point temperature reading ([Ext Air Sensor A Dew Point Temp], [Ext Air Sensor B Dew Point Temp]...) has exceeded [Ext Dew Point Over Temp Threshold].
lgpCondId4618ExternalAirSensorAIssue	1.3.6.1.4.1.476.1.42.3.2.7.1.4618	The external air sensor A is disconnected or the signal is out of range.
lgpCondId4621ExternalAirSensorBIssue	1.3.6.1.4.1.476.1.42.3.2.7.1.4621	The external air sensor B is disconnected or the signal is out of range.
lgpCondId4626SupplyChilledWaterOverTemp	1.3.6.1.4.1.476.1.42.3.2.7.1.4626	[Supply Fluid Temperature] has exceeded [High Supply Fluid Temperature Threshold].
lgpCondId4629SupplyChilledWaterTempSensorIssue	1.3.6.1.4.1.476.1.42.3.2.7.1.4629	The supply chilled water temperature sensor is disconnected or the signal is out of range.
lgpCondId4634SupplyRefrigerantOverTemp	1.3.6.1.4.1.476.1.42.3.2.7.1.4634	Event that is activated when [Supply Refrigerant Temperature] exceeds [Supply Refrig Over Temp Threshold]. The event is deactivated when the temperature drops below the threshold.
lgpCondId4637SupplyRefrigerantUnderTemp	1.3.6.1.4.1.476.1.42.3.2.7.1.4637	[Supply Refrigerant Temperature] has dropped below a specified threshold.
lgpCondId4640SupplyRefrigerantTempSensorIssue	1.3.6.1.4.1.476.1.42.3.2.7.1.4640	The supply refrigeramt temperature sensor is disconnected or the signal is out of range.
lgpCondId4645SupplyFluidOverTemp	1.3.6.1.4.1.476.1.42.3.2.7.1.4645	[Supply Fluid Temperature] has exceeded [Supply Fluid Over Temp Threshold].
lgpCondId4648SupplyFluidUnderTemp	1.3.6.1.4.1.476.1.42.3.2.7.1.4648	[Supply Fluid Temperature] has dropped below a specified threshold.
lgpCondId4651SupplyFluidTempSensorIssue	1.3.6.1.4.1.476.1.42.3.2.7.1.4651	The supply fluid temperature sensor is disconnected or the signal is out of range.
lgpCondId4656Pump1LossofFlow	1.3.6.1.4.1.476.1.42.3.2.7.1.4656	Loss of flow is detected in pump 1. The loss of flow condition occurs when no differential pressure is detected across the pump.
lgpCondId4659Pump2LossofFlow	1.3.6.1.4.1.476.1.42.3.2.7.1.4659	Loss of flow is detected in pump 2. The loss of flow condition occurs when no differential pressure is detected across the pump.
lgpCondId4662PumpShortCycle	1.3.6.1.4.1.476.1.42.3.2.7.1.4662	Pumps have short cycled. A short cycle is defined as turning on and off a number of times over a set time period.
lgpCondId4669Compressor1AHighHeadPressure	1.3.6.1.4.1.476.1.42.3.2.7.1.4669	Compressor 1A high head pressure.
lgpCondId4672Compressor1BHighHeadPressure	1.3.6.1.4.1.476.1.42.3.2.7.1.4672	Compressor 1B high head pressure.
lgpCondId4675Compressor2AHighHeadPressure	1.3.6.1.4.1.476.1.42.3.2.7.1.4675	Compressor 2A high head pressure.
lgpCondId4678Compressor2BHighHeadPressure	1.3.6.1.4.1.476.1.42.3.2.7.1.4678	Compressor 2B high head pressure.
lgpCondId4681Compressor1AShortCycle	1.3.6.1.4.1.476.1.42.3.2.7.1.4681	Compressor 1A short cycle. A short cycle is defined as turning on and off a number of times over a set time period.
lgpCondId4684Compressor1BShortCycle	1.3.6.1.4.1.476.1.42.3.2.7.1.4684	Compressor 1B short cycle. A short cycle is defined as turning on and off a number of times over a set time period.
lgpCondId4687Compressor2AShortCycle	1.3.6.1.4.1.476.1.42.3.2.7.1.4687	Compressor 2A short cycle. A short cycle is defined as turning on and off a number of times over a set time period.
lgpCondId4690Compressor2BShortCycle	1.3.6.1.4.1.476.1.42.3.2.7.1.4690	Compressor 2B short cycle. A short cycle is defined as turning on and off a number of times over a set time period.
lgpCondId4693Tandem1LowSuctionPressure	1.3.6.1.4.1.476.1.42.3.2.7.1.4693	'Tandem compressors' 1 low suction pressure.
lgpCondId4696Tandem2LowSuctionPressure	1.3.6.1.4.1.476.1.42.3.2.7.1.4696	'Tandem compressors' 2 low suction pressure.
lgpCondId4703ChilledWaterControlValvePosition	1.3.6.1.4.1.476.1.42.3.2.7.1.4703	Chilled water valve out of position. Chilled water control valve position does not match expected value.
lgpCondId4711SystemCondensationDetected	1.3.6.1.4.1.476.1.42.3.2.7.1.4711	System condensation detected.
lgpCondId4714ShutdownLossOfPower	1.3.6.1.4.1.476.1.42.3.2.7.1.4714	System lost power. This event becomes active when the unit is powered on following an unexpected loss of power.
lgpCondId4720SmokeDetected	1.3.6.1.4.1.476.1.42.3.2.7.1.4720	Smoke detected.
lgpCondId4723WaterUnderFloor	1.3.6.1.4.1.476.1.42.3.2.7.1.4723	Water under the floor is detected.
lgpCondId4726ServiceRequired	1.3.6.1.4.1.476.1.42.3.2.7.1.4726	Unit requires servicing.
lgpCondId4729FanIssue	1.3.6.1.4.1.476.1.42.3.2.7.1.4729	One or more fans are not operating within their operational parameters.
lgpCondId4732ReceptacleLoadDropped	1.3.6.1.4.1.476.1.42.3.2.7.1.4732	The receptacle's load is not drawing power.
lgpCondId4740BatteryAutomaticTestInhibited	1.3.6.1.4.1.476.1.42.3.2.7.1.4740	Automatic (scheduled) battery tests are inhibited.
lgpCondId4741BatterySelfTest	1.3.6.1.4.1.476.1.42.3.2.7.1.4741	Battery self test is in progress.
lgpCondId4742BatteryLowShutdown	1.3.6.1.4.1.476.1.42.3.2.7.1.4742	Battery disconnect due to end-of-discharge.
lgpCondId4747EquipmentTemperatureSensorFail	1.3.6.1.4.1.476.1.42.3.2.7.1.4747	One or more temperature sensors report a temperature outside of the range of expected operation.
lgpCondId4749SystemFanFailureRedundant	1.3.6.1.4.1.476.1.42.3.2.7.1.4749	Redundant system fan failure.
lgpCondId4750MultipleFanFailure	1.3.6.1.4.1.476.1.42.3.2.7.1.4750	Multiple fan failure.
lgpCondId4753MainControllerFault	1.3.6.1.4.1.476.1.42.3.2.7.1.4753	A Main Controller fault has been detected.
lgpCondId4754SystemBreakersCloseFailure	1.3.6.1.4.1.476.1.42.3.2.7.1.4754	One or more breakers in the system failed to close.
lgpCondId4755InputFilterCycleLock	1.3.6.1.4.1.476.1.42.3.2.7.1.4755	The input filter disconnect is open due to exceeding the maximum number of cycles.
lgpCondId4756ServiceCodeActive	1.3.6.1.4.1.476.1.42.3.2.7.1.4756	Service code is running.
lgpCondId4757LBSActive	1.3.6.1.4.1.476.1.42.3.2.7.1.4757	The Load Bus Sync option is active.
lgpCondId4758LBSInhibited	1.3.6.1.4.1.476.1.42.3.2.7.1.4758	The system has detected that conditions to perform Load Bus Sync are not satisfied.
lgpCondId4759LeadingPowerFactor	1.3.6.1.4.1.476.1.42.3.2.7.1.4759	The leading output Power Factor has fallen below a specified value.
lgpCondId4760ControlsResetRequired	1.3.6.1.4.1.476.1.42.3.2.7.1.4760	A controls reset is required due to one or more critical settings changing.
lgpCondId4823ParallelCommWarning	1.3.6.1.4.1.476.1.42.3.2.7.1.4823	Parallel communication bus warning.
lgpCondId4824SystemCommFail	1.3.6.1.4.1.476.1.42.3.2.7.1.4824	Failure of a device on the multi-module system communication bus.
lgpCondId4825LossofRedundancy	1.3.6.1.4.1.476.1.42.3.2.7.1.4825	The multi-module collection doesn't have enough modules to satisfy the redundancy configuration.
lgpCondId4826BPSSStartupInhibit	1.3.6.1.4.1.476.1.42.3.2.7.1.4826	The Bypass Static Switch startup is inhibited.
lgpCondId4827MMSTransferInhibit	1.3.6.1.4.1.476.1.42.3.2.7.1.4827	The critical load can not be manually transferred from inverter to bypass.
lgpCondId4828MMSRetransferInhibit	1.3.6.1.4.1.476.1.42.3.2.7.1.4828	The critical load can not be manually retransferred from bypass to inverter.
lgpCondId4830MMSLossofSyncPulse	1.3.6.1.4.1.476.1.42.3.2.7.1.4830	Multi-module system loss of sync pulse.
lgpCondId4831MMSOverload	1.3.6.1.4.1.476.1.42.3.2.7.1.4831	Multi-module system overload.
lgpCondId4834MMSOnBattery	1.3.6.1.4.1.476.1.42.3.2.7.1.4834	The multi-module system is on battery.
lgpCondId4835MMSLowBatteryWarning	1.3.6.1.4.1.476.1.42.3.2.7.1.4835	Multi-module system low battery warning.
lgpCondId4906LowAmbientTemperature	1.3.6.1.4.1.476.1.42.3.2.7.1.4906	The system has detected a low ambient temperature condition.
lgpCondId4907HighAmbientTemperature	1.3.6.1.4.1.476.1.42.3.2.7.1.4907	The system has detected a high ambient temperature condition.
lgpCondId4908LowOverallVoltage	1.3.6.1.4.1.476.1.42.3.2.7.1.4908	The system has detected a low battery string overall voltage condition.
lgpCondId4909HighOverallVoltage	1.3.6.1.4.1.476.1.42.3.2.7.1.4909	The system has detected a high battery string overall voltage condition.
lgpCondId4910HighBatteryStringCurrent	1.3.6.1.4.1.476.1.42.3.2.7.1.4910	The system has detected a high battery string current condition.
lgpCondId4911LowBatteryStringFloatCurrent	1.3.6.1.4.1.476.1.42.3.2.7.1.4911	The system has detected a low battery string float current condition.
lgpCondId4912HighBatteryStringFloatCurrent	1.3.6.1.4.1.476.1.42.3.2.7.1.4912	The system has detected a high battery string float current condition.
lgpCondId4913HighBatteryStringRippleCurrent	1.3.6.1.4.1.476.1.42.3.2.7.1.4913	The system has detected a high battery string ripple current condition.
lgpCondId4914BatteryStringDischargeDetected	1.3.6.1.4.1.476.1.42.3.2.7.1.4914	The system has detected a battery string discharge condition.
lgpCondId4915MaximumDischargeTimeExceeded	1.3.6.1.4.1.476.1.42.3.2.7.1.4915	The system has detected an excessive discharge time condition.
lgpCondId4916DischargeLowOverallVoltage	1.3.6.1.4.1.476.1.42.3.2.7.1.4916	The system has detected a low battery string overall voltage condition during a discharge.
lgpCondId4917DischargeLowCellVoltage	1.3.6.1.4.1.476.1.42.3.2.7.1.4917	The system has detected a low cell voltage condition during a discharge.
lgpCondId4918DischargeHighBatteryStringCurrent	1.3.6.1.4.1.476.1.42.3.2.7.1.4918	The system has detected a high battery string current condition during a discharge.
lgpCondId4919ExcessiveCelltoCellTemperatureDeviation	1.3.6.1.4.1.476.1.42.3.2.7.1.4919	The system has detected an excessive cell to cell temperature deviation condition.
lgpCondId4920ExcessiveCelltoAmbientTemperatureDeviation	1.3.6.1.4.1.476.1.42.3.2.7.1.4920	The system has detected an excessive cell to ambient temperature deviation condition.
lgpCondId4964LowCellVoltage	1.3.6.1.4.1.476.1.42.3.2.7.1.4964	The system has detected a low cell voltage condition.
lgpCondId4965HighCellVoltage	1.3.6.1.4.1.476.1.42.3.2.7.1.4965	The system has detected a high cell voltage condition.
lgpCondId4966LowCellTemperature	1.3.6.1.4.1.476.1.42.3.2.7.1.4966	The system has detected a low cell temperature condition.
lgpCondId4967HighCellTemperature	1.3.6.1.4.1.476.1.42.3.2.7.1.4967	The system has detected a high cell temperature condition.
lgpCondId4968LowInternalResistance	1.3.6.1.4.1.476.1.42.3.2.7.1.4968	The system has detected a low internal resistance condition.
lgpCondId4969HighInternalResistance	1.3.6.1.4.1.476.1.42.3.2.7.1.4969	The system has detected a high internal resistance condition.
lgpCondId4970HighIntercellResistance	1.3.6.1.4.1.476.1.42.3.2.7.1.4970	The system has detected a high intercell resistance condition.
lgpCondId4978IntertierResistanceHigh	1.3.6.1.4.1.476.1.42.3.2.7.1.4978	The system has detected a high intertier resistance condition.
lgpCondId4980SupplyChilledWaterLossofFlow	1.3.6.1.4.1.476.1.42.3.2.7.1.4980	Supply chilled water or glycol flow is too low.
lgpCondId4983SupplyRefrigOverTempBand1	1.3.6.1.4.1.476.1.42.3.2.7.1.4983	[Supply Refrigerant Temperature] is above the upper threshold specified by [Supply Refrig Temp Band 1].
lgpCondId4986SupplyRefrigUnderTempBand1	1.3.6.1.4.1.476.1.42.3.2.7.1.4986	[Supply Refrigerant Temperature] is below the lower threshold specified by [Supply Refrig Temp Band 1].
lgpCondId4990SupplyRefrigOverTempBand2	1.3.6.1.4.1.476.1.42.3.2.7.1.4990	[Supply Refrigerant Temperature] is above the upper threshold specified by [Supply Refrig Temp Band 2].
lgpCondId4993SupplyRefrigUnderTempBand2	1.3.6.1.4.1.476.1.42.3.2.7.1.4993	[Supply Refrigerant Temperature] is below the lower threshold specified by [Supply Refrig Temp Band 2].
lgpCondId4996Inverter1ShortCycle	1.3.6.1.4.1.476.1.42.3.2.7.1.4996	Inverter for pump 1 has short cycled and is temporarily locked out from further operation to protect from thermal overload. A short cycle is defined as powering on and off a number of times over a set time period.
lgpCondId4999Inverter2ShortCycle	1.3.6.1.4.1.476.1.42.3.2.7.1.4999	Inverter for pump 2 has short cycled and is temporarily locked out from further operation to protect from thermal overload. A short cycle is defined as powering on and off a number of times over a set time period.
lgpCondId5015SupplyAirOverTemperature	1.3.6.1.4.1.476.1.42.3.2.7.1.5015	[Supply Air Temperature] has exceeded [High Supply Air Temperature Threshold].
lgpCondId5019SupplyAirUnderTemperature	1.3.6.1.4.1.476.1.42.3.2.7.1.5019	[Supply Air Temperature] has dropped below [Low Supply Air Temperature Threshold].
lgpCondId5023ReturnAirOverTemperature	1.3.6.1.4.1.476.1.42.3.2.7.1.5023	[Return Air Temperature] has exceeded [High Return Air Temperature Threshold].
lgpCondId5026SupplyAirSensorIssue	1.3.6.1.4.1.476.1.42.3.2.7.1.5026	The air sensor at the outlet of the unit is disconnected or the signal is out of range.
lgpCondId5034HighReturnHumidity	1.3.6.1.4.1.476.1.42.3.2.7.1.5034	[Return Humidity] has exceeded [High Return Humidity Threshold].
lgpCondId5036LowReturnHumidity	1.3.6.1.4.1.476.1.42.3.2.7.1.5036	[Return Humidity] has dropped below [Low Return Humidity Threshold].
lgpCondId5037HumidifierHoursExceeded	1.3.6.1.4.1.476.1.42.3.2.7.1.5037	Operating hours for the humidifier have exceeded the threshold.
lgpCondId5038DehumidifierHoursExceeded	1.3.6.1.4.1.476.1.42.3.2.7.1.5038	Operating hours for the dehumidifier have exceeded the threshold.
lgpCondId5039HumidifierUnderCurrent	1.3.6.1.4.1.476.1.42.3.2.7.1.5039	The electrical current to the humidifier has dropped below its lower threshold.
lgpCondId5040HumidifierOverCurrent	1.3.6.1.4.1.476.1.42.3.2.7.1.5040	The electrical current to the humidifier has exceeded its upper threshold.
lgpCondId5041HumidifierLowWater	1.3.6.1.4.1.476.1.42.3.2.7.1.5041	The water level in the humidifier has dropped below its threshold.
lgpCondId5042HumidifierCylinderWorn	1.3.6.1.4.1.476.1.42.3.2.7.1.5042	Humidifier cylinder is not operating properly and needs to be replaced.
lgpCondId5043HumidifierIssue	1.3.6.1.4.1.476.1.42.3.2.7.1.5043	Humidifier issue detected, causing it to be locked out.
lgpCondId5044ExtHumidifierLockout	1.3.6.1.4.1.476.1.42.3.2.7.1.5044	The humidifier is shut down and disabled by an external input signal.
lgpCondId5045HumidifierControlBoardNotDetected	1.3.6.1.4.1.476.1.42.3.2.7.1.5045	Humidifier control board is required to be connected, but no signal is detected.
lgpCondId5046ReturnHumidityOutOfProportionalBand	1.3.6.1.4.1.476.1.42.3.2.7.1.5046	[Return Humidity] has exceeded the upper limit of [Dehumidification Proportional Band], or has dropped below the lower limit of [Humidification Proportional Band] ], for an extended period of time.
lgpCondId5053LossofAirFlow	1.3.6.1.4.1.476.1.42.3.2.7.1.5053	No air flow through the unit due to failure of all fans.
lgpCondId5054FanHoursExceeded	1.3.6.1.4.1.476.1.42.3.2.7.1.5054	Operating hours for the unit blower fan have exceeded the threshold.
lgpCondId5055TopFanIssue	1.3.6.1.4.1.476.1.42.3.2.7.1.5055	The top fan is not operating within its normal parameters.
lgpCondId5056BottomFanIssue	1.3.6.1.4.1.476.1.42.3.2.7.1.5056	The bottom fan is not operating within its normal parameters.
lgpCondId5060RemoteSensorIssue	1.3.6.1.4.1.476.1.42.3.2.7.1.5060	Remote sensor is disconnected or the signal is out of range.
lgpCondId5062Compressor1LowSuctionPressure	1.3.6.1.4.1.476.1.42.3.2.7.1.5062	Compressor 1 low suction pressure.
lgpCondId5063Compressor1HoursExceeded	1.3.6.1.4.1.476.1.42.3.2.7.1.5063	Operating hours for compressor 1 have exceeded the threshold.
lgpCondId5064DigScrollComp1TempSensorIssue	1.3.6.1.4.1.476.1.42.3.2.7.1.5064	Digital scroll compressor 1 temperature sensor is disconnected or the signal is out of range.
lgpCondId5065DigScrollComp1OverTemp	1.3.6.1.4.1.476.1.42.3.2.7.1.5065	Digital scroll compressor 1 shut off because its head temperature has exceeded the upper threshold.
lgpCondId5066Compressor1LowPressureTransducerIssue	1.3.6.1.4.1.476.1.42.3.2.7.1.5066	Compressor 1 low pressure transducer is disconnected or the signal is out of range.
lgpCondId5067ExtCompressorLockout	1.3.6.1.4.1.476.1.42.3.2.7.1.5067	The compressor is shut down and disabled by an external input signal.
lgpCondId5068ReheaterOverTemperature	1.3.6.1.4.1.476.1.42.3.2.7.1.5068	The temperature of the reheater has exceeded its threshold.
lgpCondId5069ElectricReheater1HoursExceeded	1.3.6.1.4.1.476.1.42.3.2.7.1.5069	Operating hours for electric reheater 1 have exceeded the threshold.
lgpCondId5070ExtReheatLockout	1.3.6.1.4.1.476.1.42.3.2.7.1.5070	The reheater is shut down and disabled by an external input signal.
lgpCondId5071Condenser1Issue	1.3.6.1.4.1.476.1.42.3.2.7.1.5071	Condenser 1 is not operating within its normal parameters.
lgpCondId5072CondenserVFDIssue	1.3.6.1.4.1.476.1.42.3.2.7.1.5072	The condenser fan Variable Frequency Drive is offline.
lgpCondId5073CondenserTVSSIssue	1.3.6.1.4.1.476.1.42.3.2.7.1.5073	The condenser Transient Voltage Surge Suppressor or Surge Protection Device has failed.
lgpCondId5104ExtOverTemperature	1.3.6.1.4.1.476.1.42.3.2.7.1.5104	A temperature has exceeded its threshold, as indicated by an external input signal.
lgpCondId5105ExtLossofFlow	1.3.6.1.4.1.476.1.42.3.2.7.1.5105	Loss of flow is detected, as indicated by an external input signal.
lgpCondId5106ExtCondenserPumpHighWater	1.3.6.1.4.1.476.1.42.3.2.7.1.5106	High water is detected in the condensate pump by the auxiliary float, as indicated by an external input signal.
lgpCondId5107ExtStandbyGlycolPumpOn	1.3.6.1.4.1.476.1.42.3.2.7.1.5107	The standby glycol pump is on, as indicated by an external input signal.
lgpCondId5108ExternalFireDetected	1.3.6.1.4.1.476.1.42.3.2.7.1.5108	Fire detected, as indicated by an external input signal.
lgpCondId5109UnitOn	1.3.6.1.4.1.476.1.42.3.2.7.1.5109	Unit was turned on.
lgpCondId5110UnitOff	1.3.6.1.4.1.476.1.42.3.2.7.1.5110	Unit was turned off.
lgpCondId5111UnitStandby	1.3.6.1.4.1.476.1.42.3.2.7.1.5111	Unit was placed in standby mode.
lgpCondId5112UnitPartialShutdown	1.3.6.1.4.1.476.1.42.3.2.7.1.5112	An event has occurred requiring some system components to be shutdown and disabled.
lgpCondId5113UnitShutdown	1.3.6.1.4.1.476.1.42.3.2.7.1.5113	An event has occurred requiring the unit to be shutdown and disabled to prevent damage to the system.
lgpCondId5114WaterLeakageDetectorSensorIssue	1.3.6.1.4.1.476.1.42.3.2.7.1.5114	The water leakage detector sensor is disconnected or the signal is out of range.
lgpCondId5115BMSCommunicationsTimeout	1.3.6.1.4.1.476.1.42.3.2.7.1.5115	Building Management System (or external monitoring system) has not communicated with the system within the expected timeframe.
lgpCondId5116MaintenanceDue	1.3.6.1.4.1.476.1.42.3.2.7.1.5116	The calculated maintenance date has been reached.
lgpCondId5117MaintenanceCompleted	1.3.6.1.4.1.476.1.42.3.2.7.1.5117	Maintenance has been completed on the unit.
lgpCondId5118CloggedAirFilter	1.3.6.1.4.1.476.1.42.3.2.7.1.5118	Air filter is dirty and needs to be (cleaned or) replaced.
lgpCondId5119RAMBatteryIssue	1.3.6.1.4.1.476.1.42.3.2.7.1.5119	RAM or RAM backup battery is not operating correctly.
lgpCondId5120MasterUnitCommunicationLost	1.3.6.1.4.1.476.1.42.3.2.7.1.5120	Communication with master unit has been lost.
lgpCondId5121HighPowerShutdown	1.3.6.1.4.1.476.1.42.3.2.7.1.5121	Supply to high power components has been shutdown.
lgpCondId5126DigScrollComp2OverTemp	1.3.6.1.4.1.476.1.42.3.2.7.1.5126	Digital scroll compressor 2 shut off because its head temperature has exceeded the upper threshold.
lgpCondId5144OutputOfUf	1.3.6.1.4.1.476.1.42.3.2.7.1.5144	The output frequency has exceeded a specified range for a specified period of time.
lgpCondId5145MMSModuleAlarmActive	1.3.6.1.4.1.476.1.42.3.2.7.1.5145	Active alarm or fault of any module in a multi-module system.
lgpCondId5146CompressorPumpDownIssue	1.3.6.1.4.1.476.1.42.3.2.7.1.5146	Unable to pump down suction-side pressure during compressor shutdown.
lgpCondId5147ReturnAirSensorIssue	1.3.6.1.4.1.476.1.42.3.2.7.1.5147	The air sensor at the inlet of the unit is disconnected or the signal is out of range.
lgpCondId5148CompressorHighPressureTransducerIssue	1.3.6.1.4.1.476.1.42.3.2.7.1.5148	Compressor high pressure transducer is disconnected or the signal is out of range.
lgpCondId5149BatteryNotQualified	1.3.6.1.4.1.476.1.42.3.2.7.1.5149	The UPS battery voltage is not qualified. This event will be detected even in the absence of battery disconnect or when it is open.
lgpCondId5150BatteryTerminalsReversed	1.3.6.1.4.1.476.1.42.3.2.7.1.5150	The measured battery voltage is a negative value due to reverse battery terminal connections.
lgpCondId5151BatteryConverterFailure	1.3.6.1.4.1.476.1.42.3.2.7.1.5151	Battery converter failure. This is a summary event caused by one or more power sub-modules in a UPS module.
lgpCondId5152InverterSCROpen	1.3.6.1.4.1.476.1.42.3.2.7.1.5152	The system has detected an open across one or more inverter static switch Silicon Controlled Rectifiers.
lgpCondId5153LoadSharingFault	1.3.6.1.4.1.476.1.42.3.2.7.1.5153	Difference between any phase inverter current of unit and the relevant average output current of parallel system is more than a specific percent of nominal current.
lgpCondId5154DCBusAbnormal	1.3.6.1.4.1.476.1.42.3.2.7.1.5154	The system has detected an abnormal DC Bus Voltage.
lgpCondId5155MainsInputNeutralLost	1.3.6.1.4.1.476.1.42.3.2.7.1.5155	Loss of neutral in the input source is detected.
lgpCondId5156LoadImpactTransfer	1.3.6.1.4.1.476.1.42.3.2.7.1.5156	On bypass as result of load impact.
lgpCondId5157UserOperationInvalid	1.3.6.1.4.1.476.1.42.3.2.7.1.5157	User attempted an invalid operation.
lgpCondId5158PowerSubModuleFault	1.3.6.1.4.1.476.1.42.3.2.7.1.5158	One or more failures detected in power module, inverter or rectifier.
lgpCondId5178OutputOvervoltage	1.3.6.1.4.1.476.1.42.3.2.7.1.5178	One or more of the output phase voltages has exceeded the limit.
lgpCondId5179OutputUndervoltage	1.3.6.1.4.1.476.1.42.3.2.7.1.5179	One or more of the output phase voltages has dropped below the limit.
lgpCondId5180OutputOvercurrent	1.3.6.1.4.1.476.1.42.3.2.7.1.5180	One or more of the phase currents has exceeded the limit.
lgpCondId5181NeutralOvercurrent	1.3.6.1.4.1.476.1.42.3.2.7.1.5181	The system's neutral current has exceeded the limit.
lgpCondId5182GroundOvercurrent	1.3.6.1.4.1.476.1.42.3.2.7.1.5182	System ground current has exceeded the limit.
lgpCondId5183OutputVoltageTHD	1.3.6.1.4.1.476.1.42.3.2.7.1.5183	The Total Harmonic Distortion of the voltage on one or more of the output phases has exceeded the limit.
lgpCondId5184OutputFrequencyError	1.3.6.1.4.1.476.1.42.3.2.7.1.5184	The output frequency is outside a specified range.
lgpCondId5185TransformerOvertemperature	1.3.6.1.4.1.476.1.42.3.2.7.1.5185	Indicates a unit transformer overtemperature condition.
lgpCondId5212PanelSummaryStatus	1.3.6.1.4.1.476.1.42.3.2.7.1.5212	The status for the panel. Detects and annunciates upon occurrence of any branch or panelboard main breaker active event.
lgpCondId5213PanelOvervoltage	1.3.6.1.4.1.476.1.42.3.2.7.1.5213	One or more of the phase voltages of this panel has exceeded the limit.
lgpCondId5214PanelUndervoltage	1.3.6.1.4.1.476.1.42.3.2.7.1.5214	One or more of the phase voltages of this panel is less than the limit.
lgpCondId5215PanelOvercurrent	1.3.6.1.4.1.476.1.42.3.2.7.1.5215	One or more of the phase currents of this panel has exceeded the limit.
lgpCondId5216PanelNeutralOvercurrent	1.3.6.1.4.1.476.1.42.3.2.7.1.5216	The Neutral current of this panel has exceeded the limit.
lgpCondId5217PanelGroundOvercurrent	1.3.6.1.4.1.476.1.42.3.2.7.1.5217	The Ground current of this panel has exceeded the limit.
lgpCondId5226BranchOvercurrent	1.3.6.1.4.1.476.1.42.3.2.7.1.5226	The current in one or more phases of this branch exceeds the limit.
lgpCondId5227BranchUndercurrent	1.3.6.1.4.1.476.1.42.3.2.7.1.5227	The current in one or more phases of this branch is less than the limit.
lgpCondId5245SubfeedPhaseOvercurrent	1.3.6.1.4.1.476.1.42.3.2.7.1.5245	One or more of the phase currents in this subfeed has exceeded the limit.
lgpCondId5246SubfeedNeutralOvercurrent	1.3.6.1.4.1.476.1.42.3.2.7.1.5246	The Neutral current in this subfeed has exceeded the limit.
lgpCondId5247SubfeedGroundOvercurrent	1.3.6.1.4.1.476.1.42.3.2.7.1.5247	The Ground current of this subfeed has exceeded the limit.
lgpCondId5249EventState	1.3.6.1.4.1.476.1.42.3.2.7.1.5249	The present state of this digital event input.
lgpCondId5263CompressorNotStopping	1.3.6.1.4.1.476.1.42.3.2.7.1.5263	Compressor commanded to stop, but continues to run.
lgpCondId5269CompressorHoursExceeded	1.3.6.1.4.1.476.1.42.3.2.7.1.5269	[Compressor Hours] has exceeded [Compressor Hours Threshold].
lgpCondId5270CompressorHighHeadPressure	1.3.6.1.4.1.476.1.42.3.2.7.1.5270	Compressor is shut down due to high head pressure.
lgpCondId5271CompressorLowSuctionPressure	1.3.6.1.4.1.476.1.42.3.2.7.1.5271	Compressor is shut down due to low suction pressure.
lgpCondId5272CompressorThermalOverload	1.3.6.1.4.1.476.1.42.3.2.7.1.5272	Compressor is shut down due to thermal overload.
lgpCondId5273CompressorLowOilPressure	1.3.6.1.4.1.476.1.42.3.2.7.1.5273	Compressor low oil pressure.
lgpCondId5274CompressorHeadPressureOverThreshold	1.3.6.1.4.1.476.1.42.3.2.7.1.5274	Compressor head pressure has exceeded an upper threshold.
lgpCondId5275CompressorLossofDifferentialPressure	1.3.6.1.4.1.476.1.42.3.2.7.1.5275	Compressor is shut down due to low differential pressure.
lgpCondId5277CondenserFanIssue	1.3.6.1.4.1.476.1.42.3.2.7.1.5277	Condenser fan is not operating within its operational parameters.
lgpCondId5278LowCondenserRefrigerantPressure	1.3.6.1.4.1.476.1.42.3.2.7.1.5278	Refrigerant pressure in condenser coil is too low.
lgpCondId5280LowFluidPressure	1.3.6.1.4.1.476.1.42.3.2.7.1.5280	[Fluid Pressure] has dropped below a specified threshold.
lgpCondId5293ReturnFluidOverTemp	1.3.6.1.4.1.476.1.42.3.2.7.1.5293	[Return Fluid Temperature] has exceeded a specified threshold.
lgpCondId5294ReturnFluidUnderTemp	1.3.6.1.4.1.476.1.42.3.2.7.1.5294	[Return Fluid Temperature] has dropped below a specified threshold.
lgpCondId5295ReturnFluidTempSensorIssue	1.3.6.1.4.1.476.1.42.3.2.7.1.5295	The return fluid temperature sensor is disconnected or the signal is out of range.
lgpCondId5296TeamworkReturnFluidTempSensorIssue	1.3.6.1.4.1.476.1.42.3.2.7.1.5296	The return fluid temperature sensors for all Teamwork units are disconnected or the signals are out of range.
lgpCondId5297AllPumpsLossofFlow	1.3.6.1.4.1.476.1.42.3.2.7.1.5297	System is shut down due to loss of flow in all available pumps.
lgpCondId5300PumpHoursExceeded	1.3.6.1.4.1.476.1.42.3.2.7.1.5300	[Pump Hours] has exceeded [Pump Hours Threshold].
lgpCondId5306FreeCoolingValveHoursExceeded	1.3.6.1.4.1.476.1.42.3.2.7.1.5306	[Free Cooling Valve Hours] has exceeded [Free Cooling Valve Hours Threshold].
lgpCondId5308EvaporatorInletTempSensorIssue	1.3.6.1.4.1.476.1.42.3.2.7.1.5308	The evaporator inlet temperature sensor is disconnected or the signal is out of range.
lgpCondId5309TeamworkEvaporatorInletTempSensorIssue	1.3.6.1.4.1.476.1.42.3.2.7.1.5309	The evaporator inlet temperature sensors for all Teamwork units are disconnected or the signals are out of range.
lgpCondId5310EvaporatorFluidFreezeAutoReset	1.3.6.1.4.1.476.1.42.3.2.7.1.5310	Evaporator outlet fluid temperature has dropped below the freeze threshold. Evaporator has been shut down, but will restart when the temperature rises above the threshold.
lgpCondId5311EvaporatorFluidFreezeManualResetRequired	1.3.6.1.4.1.476.1.42.3.2.7.1.5311	Evaporator outlet fluid temperature has dropped below the freeze threshold. Evaporator has been shut down and requires a manual reset.
lgpCondId5315SubgroupEventOccurredDuringCommunicationLoss	1.3.6.1.4.1.476.1.42.3.2.7.1.5315	While subgroup unit communication was lost, an event occurred on the subgroup unit. Please check subgroup unit event log.
lgpCondId5335ReturnAirUnderTemperature	1.3.6.1.4.1.476.1.42.3.2.7.1.5335	[Return Air Temperature] has dropped below [Low Return Air Temperature Threshold].
lgpCondId5349ExtAirSensorAHighHumidity	1.3.6.1.4.1.476.1.42.3.2.7.1.5349	[Ext Air Sensor A Humidity] has exceeded [Ext Air Sensor A High Humidity Threshold].
lgpCondId5351ExtAirSensorALowHumidity	1.3.6.1.4.1.476.1.42.3.2.7.1.5351	[Ext Air Sensor A Humidity] has dropped below [Ext Air Sensor A Low Humidity Threshold].
lgpCondId5352CompressorShortCycle	1.3.6.1.4.1.476.1.42.3.2.7.1.5352	Compressor short cycle. A short cycle is defined as turning on and off a number of times over a set time period.
lgpCondId5354DigScrollCompDischargeTempSensorIssue	1.3.6.1.4.1.476.1.42.3.2.7.1.5354	Digital scroll compressor discharge temperature sensor is disconnected or the signal is out of range.
lgpCondId5355DigScrollCompOverTemp	1.3.6.1.4.1.476.1.42.3.2.7.1.5355	Digital scroll compressor is shut down due to head temperature exceeding an upper threshold.
lgpCondId5361ExtFreeCoolingLockout	1.3.6.1.4.1.476.1.42.3.2.7.1.5361	Free cooling is disabled by an external input signal.
lgpCondId5362FreeCoolingTempSensorIssue	1.3.6.1.4.1.476.1.42.3.2.7.1.5362	The free cooling fluid temperature sensor is disconnected or the signal is out of range.
lgpCondId5365HotWaterHotGasValveHoursExceeded	1.3.6.1.4.1.476.1.42.3.2.7.1.5365	[Hot Water / Hot Gas Valve Hours] has exceeded [Hot Water / Hot Gas Valve Hours Threshold].
lgpCondId5368ElectricReheaterHoursExceeded	1.3.6.1.4.1.476.1.42.3.2.7.1.5368	[Electric Reheater Hours] has exceeded [Electric Reheaters Hours Threshold].
lgpCondId5376MainFanOverload	1.3.6.1.4.1.476.1.42.3.2.7.1.5376	Main fan is shut down due to thermal overload.
lgpCondId5377Condenser	1.3.6.1.4.1.476.1.42.3.2.7.1.5377	Condenser is not operating within its operational parameters.
lgpCondId5415ExtLossofAirBlower	1.3.6.1.4.1.476.1.42.3.2.7.1.5415	Loss of air blower is detected, as indicated by an external input signal.
lgpCondId5416ExtStandbyUnitOn	1.3.6.1.4.1.476.1.42.3.2.7.1.5416	Standby unit is on, as indicated by an external input signal.
lgpCondId5417DigitalOutputBoardNotDetected	1.3.6.1.4.1.476.1.42.3.2.7.1.5417	Digital output board is required to be connected, but no signal is detected.
lgpCondId5418UnitCodeMissing	1.3.6.1.4.1.476.1.42.3.2.7.1.5418	Unit code has not been entered and saved.
lgpCondId5419UnitCommunicationLost	1.3.6.1.4.1.476.1.42.3.2.7.1.5419	Master has lost communication with one or more networked units.
lgpCondId5422OvertemperaturePowerOff	1.3.6.1.4.1.476.1.42.3.2.7.1.5422	Power turned off because equipment over temperature limit.
lgpCondId5423TooManySensors	1.3.6.1.4.1.476.1.42.3.2.7.1.5423	The number of sensors connected to the PDU exceeds the allowable limit.
lgpCondId5432TransformerOvertemperaturePowerOff	1.3.6.1.4.1.476.1.42.3.2.7.1.5432	Output power shutdown due to high transformer temperature.
lgpCondId5433TransformerOvertemperature	1.3.6.1.4.1.476.1.42.3.2.7.1.5433	Transformer temperature has exceeded the limit.
lgpCondId5434TransformerTemperatureSensorFail	1.3.6.1.4.1.476.1.42.3.2.7.1.5434	Transformer temperature sensor has failed.
lgpCondId5436LowAmbientTemperatureProbeTwo	1.3.6.1.4.1.476.1.42.3.2.7.1.5436	The system has detected a low ambient temperature condition on temperature probe 2.
lgpCondId5437HighAmbientTemperatureProbeTwo	1.3.6.1.4.1.476.1.42.3.2.7.1.5437	The system has detected a high ambient temperature condition on temperature probe 2.
lgpCondId5438ThermalRunawayDetected	1.3.6.1.4.1.476.1.42.3.2.7.1.5438	The system has detected a thermal runaway condition.
lgpCondId5439BatteryStringEqualize	1.3.6.1.4.1.476.1.42.3.2.7.1.5439	The system has detected a battery string equalize condition.
lgpCondId5440BatteryStringOffline	1.3.6.1.4.1.476.1.42.3.2.7.1.5440	The system has detected the battery string is offline.
lgpCondId5442DischargeLowCellVoltage	1.3.6.1.4.1.476.1.42.3.2.7.1.5442	The system has detected a low cell voltage condition during a discharge.
lgpCondId5447MMSPowerSharing	1.3.6.1.4.1.476.1.42.3.2.7.1.5447	A module is not sharing power with the other modules in a multi -module system.
lgpCondId5453ModuleInStandbyIntelligentParalleling	1.3.6.1.4.1.476.1.42.3.2.7.1.5453	Module is placed into standby operation per Intelligent Paralleling.
lgpCondId5456ECOModeActive	1.3.6.1.4.1.476.1.42.3.2.7.1.5456	Conditions for Activation or Automatic Reactivation have been satisfied.
lgpCondId5457ECOModeSuspended	1.3.6.1.4.1.476.1.42.3.2.7.1.5457	ECO Mode session is suspended.
lgpCondId5458ExcessECOSuspends	1.3.6.1.4.1.476.1.42.3.2.7.1.5458	Number of automatic suspensions has exceeded the ECO Mode - Maximum Auto Suspensions setting.
lgpCondId5471DoorOpen	1.3.6.1.4.1.476.1.42.3.2.7.1.5471	An open door was detected.
lgpCondId5472DoorSensorDisconnected	1.3.6.1.4.1.476.1.42.3.2.7.1.5472	Door sensor disconnect detected.
lgpCondId5479ContactClosureOpen	1.3.6.1.4.1.476.1.42.3.2.7.1.5479	An open circuit was detected.
lgpCondId5480ContactClosureClosed	1.3.6.1.4.1.476.1.42.3.2.7.1.5480	A closed circuit was detected.
lgpCondId5492ExtSystemCondensationDetected	1.3.6.1.4.1.476.1.42.3.2.7.1.5492	External system condensation detected.
lgpCondId5495ExtFanIssue	1.3.6.1.4.1.476.1.42.3.2.7.1.5495	One or more fans are not operating within their operational parameters.
lgpCondId5500ExtRemoteShutdown	1.3.6.1.4.1.476.1.42.3.2.7.1.5500	Unit is shut down by a remote signal.
lgpCondId5505HotAisleTempOutofRange	1.3.6.1.4.1.476.1.42.3.2.7.1.5505	The air temperature in the Hot aisle is either above [Hot Aisle Over Temp Threshold] or below [Hot Aisle Under Temp Threshold].
lgpCondId5508ColdAisleTempOutofRange	1.3.6.1.4.1.476.1.42.3.2.7.1.5508	The air temperature in the cold aisle is either above [Cold Aisle Over Temp Threshold] or below [Cold Aisle Under Temp Threshold].
lgpCondId5512RemoteShutdown	1.3.6.1.4.1.476.1.42.3.2.7.1.5512	Unit is shut down by a remote signal.
lgpCondId5513CompressorCapacityReduced	1.3.6.1.4.1.476.1.42.3.2.7.1.5513	Compressor capacity has been reduced.
lgpCondId5514CompressorLowPressureTransducerIssue	1.3.6.1.4.1.476.1.42.3.2.7.1.5514	Compressor low pressure transducer is disconnected or the signal is out of range.
lgpCondId5524PDUNeutralOverCurrent	1.3.6.1.4.1.476.1.42.3.2.7.1.5524	The system has detected a neutral over current condition.
lgpCondId5531CondenserCommunicationLost	1.3.6.1.4.1.476.1.42.3.2.7.1.5531	Communication with condenser unit has been lost.
lgpCondId5535CondenserOutsideAirTempSensorIssue	1.3.6.1.4.1.476.1.42.3.2.7.1.5535	Condenser outside air temperature sensor is disconnected or the signal is out of range.
lgpCondId5536CondenserOutsideAirTempOutofOperatingRange	1.3.6.1.4.1.476.1.42.3.2.7.1.5536	[Condenser Outside Air Temperature] is either above an upper threshold or below a lower threshold.
lgpCondId5537CondenserControlBoardIssue	1.3.6.1.4.1.476.1.42.3.2.7.1.5537	The condenser control board is reporting an issue.
lgpCondId5539CondenserRefrigerantPressureOverThreshold	1.3.6.1.4.1.476.1.42.3.2.7.1.5539	Condenser refrigerant pressure has exceeded a threshold.
lgpCondId5540CondenserRefrigerantPressureUnderThreshold	1.3.6.1.4.1.476.1.42.3.2.7.1.5540	Condenser refrigerant pressure has dropped below a threshold.
lgpCondId5541CondenserRefrigerantPressureSensorIssue	1.3.6.1.4.1.476.1.42.3.2.7.1.5541	Condenser refrigerant pressure sensor is disconnected or the signal is out of range.
lgpCondId5542CondenserSupplyRefrigerantOverTemp	1.3.6.1.4.1.476.1.42.3.2.7.1.5542	Condenser supply refrigerant temperature has exceeded a threshold.
lgpCondId5543CondenserSupplyRefrigerantUnderTemp	1.3.6.1.4.1.476.1.42.3.2.7.1.5543	Condenser supply refrigerant temperature has dropped below a specified threshold.
lgpCondId5544CondenserSupplyRefrigerantTempSensorIssue	1.3.6.1.4.1.476.1.42.3.2.7.1.5544	Condenser supply refrigerant temperature sensor is disconnected or the signal is out of range.
lgpCondId5545CondenserMaxFanSpeedOverride	1.3.6.1.4.1.476.1.42.3.2.7.1.5545	Fan speed exceeding the maximum set point in order to alleviate a high temperature or pressure condition.
lgpCondId5559EvaporatorReturnFluidOverTemp	1.3.6.1.4.1.476.1.42.3.2.7.1.5559	[Evaporator Return Fluid Temperature] has exceeded a threshold. The event is deactivated when the temperature drops below the threshold.
lgpCondId5560EvaporatorReturnFluidUnderTemp	1.3.6.1.4.1.476.1.42.3.2.7.1.5560	[Evaporator Return Fluid Temperature] has dropped below a threshold. The event is deactivated when the temperature rises above the threshold.
lgpCondId5561LBSActiveMaster	1.3.6.1.4.1.476.1.42.3.2.7.1.5561	This UPS system has been selected as the functional Master Load Bus Synchronization (LBS) system.
lgpCondId5562LBSActiveSlave	1.3.6.1.4.1.476.1.42.3.2.7.1.5562	This UPS system is synchronized to the output bus of the UPS system that has been selected as the Master Load Bus Synchronization (LBS) system.
lgpCondId5563DCBusLowFault	1.3.6.1.4.1.476.1.42.3.2.7.1.5563	The DC Bus voltage has reached a critical low level.
lgpCondId5564FanContactorOpen	1.3.6.1.4.1.476.1.42.3.2.7.1.5564	The fan contactor is open.
lgpCondId5565FanContactorOpenFail	1.3.6.1.4.1.476.1.42.3.2.7.1.5565	The fan contactor failed to open.
lgpCondId5566FanContactorCloseFail	1.3.6.1.4.1.476.1.42.3.2.7.1.5566	The fan contactor failed to close.
lgpCondId5567IPInhibit	1.3.6.1.4.1.476.1.42.3.2.7.1.5567	The intelligent paralleling operation is inhibited.
lgpCondId5568InputUndervoltage	1.3.6.1.4.1.476.1.42.3.2.7.1.5568	One or more of the input phase voltages has dropped below the limit.
lgpCondId5569InputOvervoltage	1.3.6.1.4.1.476.1.42.3.2.7.1.5569	One or more of the input phase voltages has exceeded the limit.
lgpCondId5573AmbientAirSensorIssue	1.3.6.1.4.1.476.1.42.3.2.7.1.5573	Ambient air sensor is disconnected or the signal is out of range.
lgpCondId5577ExtDewPointUnderTemperature	1.3.6.1.4.1.476.1.42.3.2.7.1.5577	At least one dew point temperature reading ([Ext Air Sensor A Dew Point Temp], [Ext Air Sensor B Dew Point Temp]...) has dropped below [Ext Dew Point Under Temp Threshold].
lgpCondId5578DewPointOverTemperature	1.3.6.1.4.1.476.1.42.3.2.7.1.5578	Dew point temperature reading has exceeded the upper threshold.
lgpCondId5579DewPointUnderTemperature	1.3.6.1.4.1.476.1.42.3.2.7.1.5579	Dew point temperature reading has dropped below the lower threshold.
lgpCondId5588UnspecifiedGeneralEvent	1.3.6.1.4.1.476.1.42.3.2.7.1.5588	One or more unspecified events active. See local unit display for further details.
lgpCondId5593RemoteSensorAverageOverTemperature	1.3.6.1.4.1.476.1.42.3.2.7.1.5593	[Remote Sensor Average Temperature] has exceeded [Remote Sensor Over Temp Threshold].
lgpCondId5594RemoteSensorAverageUnderTemperature	1.3.6.1.4.1.476.1.42.3.2.7.1.5594	[Remote Sensor Average Temperature] has dropped below [Remote Sensor Under Temp Threshold].
lgpCondId5595RemoteSensorSystemAverageOverTemperature	1.3.6.1.4.1.476.1.42.3.2.7.1.5595	[Remote Sensor System Average Temperature] has exceeded [Remote Sensor Over Temp Threshold].
lgpCondId5596RemoteSensorSystemAverageUnderTemperature	1.3.6.1.4.1.476.1.42.3.2.7.1.5596	[Remote Sensor System Average Temperature] has dropped below [Remote Sensor Under Temp Threshold].
lgpCondId5597RemoteSensorOverTemperature	1.3.6.1.4.1.476.1.42.3.2.7.1.5597	[Remote Sensor Temperature] has exceeded [Remote Sensor Over Temp Threshold].
lgpCondId5598RemoteSensorUnderTemperature	1.3.6.1.4.1.476.1.42.3.2.7.1.5598	[Remote Sensor Temperature] has dropped below [Remote Sensor Under Temp Threshold].
lgpCondId5600AirEconomizerEmergencyOverride	1.3.6.1.4.1.476.1.42.3.2.7.1.5600	Indoor room temperature has exceeded its upper threshold and the outdoor air damper has been opened for emergency cooling.
lgpCondId5601AirEconomizerReducedAirflow	1.3.6.1.4.1.476.1.42.3.2.7.1.5601	Air economizer filter is dirty and needs to be cleaned or replaced.
lgpCondId5604CompressorSuperheatOverThreshold	1.3.6.1.4.1.476.1.42.3.2.7.1.5604	Compressor discharge refrigerant superheat temperature has exceeded an upper threshold.
lgpCondId5609ThermalRunawayCelltoAmbientTemperatureEvent	1.3.6.1.4.1.476.1.42.3.2.7.1.5609	The delta temperature between a cell temperature and the ambient temperature has exceeded the thermal runaway cell to ambient temperature threshold.
lgpCondId5610ThermalRunawayCelltoCellTemperatureEvent	1.3.6.1.4.1.476.1.42.3.2.7.1.5610	The delta temperature between two cells has exceeded the thermal runaway cell to cell temperature threshold.
lgpCondId5611ThermalRunawayChargerCurrentLevelOneEvent	1.3.6.1.4.1.476.1.42.3.2.7.1.5611	The Battery-String charger current has exceeded the thermal runaway charger current level one threshold.
lgpCondId5612ThermalRunawayChargerCurrentLevelTwoEvent	1.3.6.1.4.1.476.1.42.3.2.7.1.5612	The Battery-String charger current has exceeded the thermal runaway charger current level two threshold.
lgpCondId5617TemperatureControlSensorIssue	1.3.6.1.4.1.476.1.42.3.2.7.1.5617	The air sensor selected for cooling control is disconnected or the signal is out of range.
lgpCondId5621EEVSuperheatBelowThreshold	1.3.6.1.4.1.476.1.42.3.2.7.1.5621	Electronic expansion valve refrigerant low superheat event.
lgpCondId5622EEVDischargeTempAboveThreshold	1.3.6.1.4.1.476.1.42.3.2.7.1.5622	Electronic expansion valve refrigerant high discharge temperature event.
lgpCondId5623EEVBatteryIssue	1.3.6.1.4.1.476.1.42.3.2.7.1.5623	Electronic expansion valve battery cannot be recharged and needs to be replaced.
lgpCondId5624EEVPowerIssue	1.3.6.1.4.1.476.1.42.3.2.7.1.5624	Electronic expansion valve lost power and is running on battery backup.
lgpCondId5625EEVUnspecifiedGeneralEvent	1.3.6.1.4.1.476.1.42.3.2.7.1.5625	One or more unspecified electronic expansion valve events active. See local unit display for further details.
lgpCondId5629StaticPressureSensorIssue	1.3.6.1.4.1.476.1.42.3.2.7.1.5629	The static pressure sensor is disconnected or the signal is out of range.
lgpCondId5630HighStaticPressure	1.3.6.1.4.1.476.1.42.3.2.7.1.5630	High static pressure event.
lgpCondId5631LowStaticPressure	1.3.6.1.4.1.476.1.42.3.2.7.1.5631	Low static pressure event.
lgpCondId5636PumpUnspecifiedGeneralEvent	1.3.6.1.4.1.476.1.42.3.2.7.1.5636	One or more unspecified pump events active. See local unit display for further details.
lgpCondId5637CondenserUnitUnspecifiedGeneralEvent	1.3.6.1.4.1.476.1.42.3.2.7.1.5637	One or more unspecified condenser unit events active. See local unit display for further details.
lgpCondId5638CondenserCircuitUnspecifiedGeneralEvent	1.3.6.1.4.1.476.1.42.3.2.7.1.5638	One or more unspecified condenser circuit events active. See local unit display for further details.
lgpCondId5642SFAReservedEvent1	1.3.6.1.4.1.476.1.42.3.2.7.1.5642	Reserved event for SFA use.
lgpCondId5643SFAReservedEvent2	1.3.6.1.4.1.476.1.42.3.2.7.1.5643	Reserved event for SFA use.
lgpCondId5644SFAReservedEvent3	1.3.6.1.4.1.476.1.42.3.2.7.1.5644	Reserved event for SFA use.
lgpCondId5645SFAReservedEvent4	1.3.6.1.4.1.476.1.42.3.2.7.1.5645	Reserved event for SFA use.
lgpCondId5646SFAReservedEvent5	1.3.6.1.4.1.476.1.42.3.2.7.1.5646	Reserved event for SFA use.
lgpCondId5647SFAReservedEvent6	1.3.6.1.4.1.476.1.42.3.2.7.1.5647	Reserved event for SFA use.
lgpCondId5648SFAReservedEvent7	1.3.6.1.4.1.476.1.42.3.2.7.1.5648	Reserved event for SFA use.
lgpCondId5649SFAReservedEvent8	1.3.6.1.4.1.476.1.42.3.2.7.1.5649	Reserved event for SFA use.
lgpCondId5650SFAReservedEvent9	1.3.6.1.4.1.476.1.42.3.2.7.1.5650	Reserved event for SFA use.
lgpCondId5651SFAReservedEvent10	1.3.6.1.4.1.476.1.42.3.2.7.1.5651	Reserved event for SFA use.
lgpCondId5652SFAReservedEvent11	1.3.6.1.4.1.476.1.42.3.2.7.1.5652	Reserved event for SFA use.
lgpCondId5653SFAReservedEvent12	1.3.6.1.4.1.476.1.42.3.2.7.1.5653	Reserved event for SFA use.
lgpCondId5654SFAReservedEvent13	1.3.6.1.4.1.476.1.42.3.2.7.1.5654	Reserved event for SFA use.
lgpCondId5655SFAReservedEvent14	1.3.6.1.4.1.476.1.42.3.2.7.1.5655	Reserved event for SFA use.
lgpCondId5656SFAReservedEvent15	1.3.6.1.4.1.476.1.42.3.2.7.1.5656	Reserved event for SFA use.
lgpCondId5657SFAReservedEvent16	1.3.6.1.4.1.476.1.42.3.2.7.1.5657	Reserved event for SFA use.
lgpCondId5658SFAReservedEvent17	1.3.6.1.4.1.476.1.42.3.2.7.1.5658	Reserved event for SFA use.
lgpCondId5659SFAReservedEvent18	1.3.6.1.4.1.476.1.42.3.2.7.1.5659	Reserved event for SFA use.
lgpCondId5660SFAReservedEvent19	1.3.6.1.4.1.476.1.42.3.2.7.1.5660	Reserved event for SFA use.
lgpCondId5661SFAReservedEvent20	1.3.6.1.4.1.476.1.42.3.2.7.1.5661	Reserved event for SFA use.
lgpCondId5662SFAReservedEvent21	1.3.6.1.4.1.476.1.42.3.2.7.1.5662	Reserved event for SFA use.
lgpCondId5663SFAReservedEvent22	1.3.6.1.4.1.476.1.42.3.2.7.1.5663	Reserved event for SFA use.
lgpCondId5664SFAReservedEvent23	1.3.6.1.4.1.476.1.42.3.2.7.1.5664	Reserved event for SFA use.
lgpCondId5665SFAReservedEvent24	1.3.6.1.4.1.476.1.42.3.2.7.1.5665	Reserved event for SFA use.
lgpCondId5666SFAReservedEvent25	1.3.6.1.4.1.476.1.42.3.2.7.1.5666	Reserved event for SFA use.
lgpCondId5768OutletAirOvertemperatureLimit	1.3.6.1.4.1.476.1.42.3.2.7.1.5768	The difference between the outlet air temperature and inlet air temperature exceeds a specified maximum temperature.
lgpCondId5769EMOShutdown	1.3.6.1.4.1.476.1.42.3.2.7.1.5769	An Emergency Module Off command has been detected.
lgpCondId5770TopOutletFanFault	1.3.6.1.4.1.476.1.42.3.2.7.1.5770	Top outlet fan fault - one or more top outlet fans have failed.

RFC description

Provides flexible threshold and alarm condition objects for Liebert GlobalProducts UPS and power management equipment.

Start monitoring Liebert (Vertiv) UPS or precision power/cooling equipment (flexible alarm conditions) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download LIEBERT-GP-FLEXIBLE-CONDITIONS-MIB

What Is LIEBERT-GP-FLEXIBLE-CONDITIONS-MIB?

Supported Devices

Monitoring Examples

What Can Be Monitored

This MIB depends on

Related MIBs

RFC description