Juniper-PPP-MIB :: juniPppSummaryPppNetworkIfLastChangeTime

MIB Reference — IPNetwork Monitor · Updated September 26, 2026

All MIBs › Juniper-PPP-MIB › juniPppSummaryPppNetworkIfLastChangeTime

juniPppSummaryPppNetworkIfLastChangeTime

Module: Juniper-PPP-MIB

OID (symbolic): Juniper-PPP-MIB::juniPppSummaryPppNetworkIfLastChangeTime

OID (numeric): 1.3.6.1.4.1.4874.2.2.11.1.7.40

Node type: OBJECT-TYPE

Type: TimeTicks

Access: read-only

Description: The value of the sysUpTime at the time of the last PPP network interface creation or deletion in the system. If the number of PPP network interfaces has been unchanged since the last re-initialization of the system, then this object contains a zero value.

What is juniPppSummaryPppNetworkIfLastChangeTime?

This value reports the value of the sysUpTime at the time of the last PPP network interface creation or deletion in the system. If the number of PPP network interfaces has been unchanged since the last re-initialization of the system, then this object contains a zero value. Comparing it against the current sysUpTime tells an admin how recently interfaces were added or removed from this table, useful for correlating a count change with a specific maintenance event. For example, if juniPppSummaryPppNetworkIfLastChangeTime matches the timestamp of a known provisioning job, the admin can confirm that job is what changed the interface counts rather than an unplanned event.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.4874.2.2.11.1.7.40
snmpwalk -v2c -c public <target> Juniper-PPP-MIB::juniPppSummaryPppNetworkIfLastChangeTime

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.4874.2.2.11.1.7.40.1
snmpget -v2c -c public <target> Juniper-PPP-MIB::juniPppSummaryPppNetworkIfLastChangeTime.1

Start monitoring Juniper Networks E-series router (PPP link/LCP/keepalive status) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the Juniper-PPP-MIB::juniPppSummaryPppNetworkIfLastChangeTime OID value, configure state conditions and alerts, and monitor any Juniper Networks E-series router (PPP link/LCP/keepalive status) from a single console.

OID Breakdown

Upper-level ancestors (10 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.4874juniperUniJuniper-UNI-SMI
1.3.6.1.4.1.4874.2juniperUniMibsJuniper-UNI-SMI
1.3.6.1.4.1.4874.2.2juniMibsJuniper-MIBs
1.3.6.1.4.1.4874.2.2.11juniPppMIBJuniper-MIBs
Numeric OIDNameModule
1.3.6.1.4.1.4874.2.2.11.1juniPppObjectsJuniper-PPP-MIB
1.3.6.1.4.1.4874.2.2.11.1.7juniPppSummaryJuniper-PPP-MIB
1.3.6.1.4.1.4874.2.2.11.1.7.40juniPppSummaryPppNetworkIfLastChangeTimeJuniper-PPP-MIB