Juniper-PPP-MIB :: juniPppIpv6ConfigAdminStatus

MIB Reference — IPNetwork Monitor · Updated September 26, 2026

All MIBs › Juniper-PPP-MIB › juniPppIpv6ConfigAdminStatus

juniPppIpv6ConfigAdminStatus

Module: Juniper-PPP-MIB

OID (symbolic): Juniper-PPP-MIB::juniPppIpv6ConfigAdminStatus

OID (numeric): 1.3.6.1.4.1.4874.2.2.11.1.8.2.1.1

Node type: OBJECT-TYPE

Type: INTEGER

Access: read-write

Description: The immediate desired status of the IPv6 network protocol. Setting this object to open will inject an administrative open event into the IPv6 network protocol's finite state machine. Setting this object to close will inject an administrative close event into the IPv6 network protocol's finite state machine.

What is juniPppIpv6ConfigAdminStatus?

Setting this to open injects an administrative-open event into the IPv6 network protocol's finite state machine on this PPP interface, and setting it to close injects an administrative-close event. It's the IPv6 counterpart to juniPppOsiConfigAdminStatus/juniPppIpConfigInitiateIp-style controls. For example, an admin would set this to close to disable IPv6 service on a session while leaving IPv4 running.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.4874.2.2.11.1.8.2.1.1
snmpwalk -v2c -c public <target> Juniper-PPP-MIB::juniPppIpv6ConfigAdminStatus

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.4874.2.2.11.1.8.2.1.1.1
snmpget -v2c -c public <target> Juniper-PPP-MIB::juniPppIpv6ConfigAdminStatus.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.4874.2.2.11.1.8.2.1.1.1 i <value>

Start monitoring Juniper Networks E-series router (PPP link/LCP/keepalive status) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the Juniper-PPP-MIB::juniPppIpv6ConfigAdminStatus OID value, configure state conditions and alerts, and monitor any Juniper Networks E-series router (PPP link/LCP/keepalive status) from a single console.

OID Breakdown

Upper-level ancestors (10 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.4874juniperUniJuniper-UNI-SMI
1.3.6.1.4.1.4874.2juniperUniMibsJuniper-UNI-SMI
1.3.6.1.4.1.4874.2.2juniMibsJuniper-MIBs
1.3.6.1.4.1.4874.2.2.11juniPppMIBJuniper-MIBs
Numeric OIDNameModule
1.3.6.1.4.1.4874.2.2.11.1juniPppObjectsJuniper-PPP-MIB
1.3.6.1.4.1.4874.2.2.11.1.8juniPppIpv6Juniper-PPP-MIB
1.3.6.1.4.1.4874.2.2.11.1.8.2juniPppIpv6ConfigTableJuniper-PPP-MIB
1.3.6.1.4.1.4874.2.2.11.1.8.2.1juniPppIpv6ConfigEntryJuniper-PPP-MIB
1.3.6.1.4.1.4874.2.2.11.1.8.2.1.1juniPppIpv6ConfigAdminStatusJuniper-PPP-MIB