All MIBs › Juniper-PPP-MIB › juniPppIpTerminateReason
juniPppIpTerminateReason
Module: Juniper-PPP-MIB
OID (symbolic): Juniper-PPP-MIB::juniPppIpTerminateReason
OID (numeric): 1.3.6.1.4.1.4874.2.2.11.1.3.1.1.2
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-only
Description: Reason the IPCP link was terminated: none None. other Not specified. noService No IP service configured on this PPP link. admin Administratively disabled. linkDown Underlying link is down. peerTerminated Peer initiated termination. peerRenegotiated Peer initiated renegotiation. maxRetriesExceeded Maximum number of config retries exceeded. negotiationFailure Failed to negotiate IPCP option. See juniPppIpTerminateNegFailOption.
What is juniPppIpTerminateReason?
This enumerated value reports why the IPCP (IP control protocol) session on this PPP link was terminated, such as noService, admin, linkDown, peerTerminated, or negotiationFailure. Admins check it when IP connectivity drops on an otherwise-up PPP link to see whether the cause is IPCP-specific rather than a lower-layer or authentication issue. For example, negotiationFailure here would send the admin to juniPppIpTerminateNegFailOption to see exactly which IPCP option failed.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.4874.2.2.11.1.3.1.1.2 snmpwalk -v2c -c public <target> Juniper-PPP-MIB::juniPppIpTerminateReason
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.4874.2.2.11.1.3.1.1.2.1 snmpget -v2c -c public <target> Juniper-PPP-MIB::juniPppIpTerminateReason.1
Start monitoring Juniper Networks E-series router (PPP link/LCP/keepalive status) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the Juniper-PPP-MIB::juniPppIpTerminateReason OID value, configure state conditions and alerts, and monitor any Juniper Networks E-series router (PPP link/LCP/keepalive status) from a single console.
OID Breakdown
Upper-level ancestors (10 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.4874 | juniperUni | Juniper-UNI-SMI |
| 1.3.6.1.4.1.4874.2 | juniperUniMibs | Juniper-UNI-SMI |
| 1.3.6.1.4.1.4874.2.2 | juniMibs | Juniper-MIBs |
| 1.3.6.1.4.1.4874.2.2.11 | juniPppMIB | Juniper-MIBs |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.4874.2.2.11.1 | juniPppObjects | Juniper-PPP-MIB |
| 1.3.6.1.4.1.4874.2.2.11.1.3 | juniPppIp | Juniper-PPP-MIB |
| 1.3.6.1.4.1.4874.2.2.11.1.3.1 | juniPppIpTable | Juniper-PPP-MIB |
| 1.3.6.1.4.1.4874.2.2.11.1.3.1.1 | juniPppIpEntry | Juniper-PPP-MIB |
| 1.3.6.1.4.1.4874.2.2.11.1.3.1.1.2 | juniPppIpTerminateReason | Juniper-PPP-MIB |