Juniper-PPP-MIB :: juniPppSummaryPppNetworkOsiNcpNoResources

MIB Reference — IPNetwork Monitor · Updated September 26, 2026

All MIBs › Juniper-PPP-MIB › juniPppSummaryPppNetworkOsiNcpNoResources

juniPppSummaryPppNetworkOsiNcpNoResources

Module: Juniper-PPP-MIB

OID (symbolic): Juniper-PPP-MIB::juniPppSummaryPppNetworkOsiNcpNoResources

OID (numeric): 1.3.6.1.4.1.4874.2.2.11.1.7.83

Node type: OBJECT-TYPE

Type: Integer32

Access: read-only

Description: The total number of OSI NCPs in the system configured on PPP network interfaces with an operational state of noResources(4).

What is juniPppSummaryPppNetworkOsiNcpNoResources?

This gauge reports the total number of OSI NCPs in the system configured on PPP network interfaces with an operational state of noResources(4). It surfaces cases where the protocol could not be brought up because the system ran out of an internal resource (such as address pool entries), which is a capacity problem rather than a link or peer fault. For example, a growing juniPppSummaryPppNetworkOsiNcpNoResources during heavy subscriber login would point an admin toward exhausted address-pool or session-table resources.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.4874.2.2.11.1.7.83
snmpwalk -v2c -c public <target> Juniper-PPP-MIB::juniPppSummaryPppNetworkOsiNcpNoResources

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.4874.2.2.11.1.7.83.1
snmpget -v2c -c public <target> Juniper-PPP-MIB::juniPppSummaryPppNetworkOsiNcpNoResources.1

SNMPv3 example:

snmpget -v3 -l authPriv -u snmpv3-user -a SHA -A "AuthPassword1" -x AES -X "PrivPassword1" <target> juniPppSummaryPppNetworkOsiNcpNoResources.1

Start monitoring Juniper Networks E-series router (PPP link/LCP/keepalive status) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the Juniper-PPP-MIB::juniPppSummaryPppNetworkOsiNcpNoResources OID value, configure state conditions and alerts, and monitor any Juniper Networks E-series router (PPP link/LCP/keepalive status) from a single console.

OID Breakdown

Upper-level ancestors (10 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.4874juniperUniJuniper-UNI-SMI
1.3.6.1.4.1.4874.2juniperUniMibsJuniper-UNI-SMI
1.3.6.1.4.1.4874.2.2juniMibsJuniper-MIBs
1.3.6.1.4.1.4874.2.2.11juniPppMIBJuniper-MIBs
Numeric OIDNameModule
1.3.6.1.4.1.4874.2.2.11.1juniPppObjectsJuniper-PPP-MIB
1.3.6.1.4.1.4874.2.2.11.1.7juniPppSummaryJuniper-PPP-MIB
1.3.6.1.4.1.4874.2.2.11.1.7.83juniPppSummaryPppNetworkOsiNcpNoResourcesJuniper-PPP-MIB