All MIBs › Juniper-PPP-MIB › juniPppLinkStatusTerminateReason
juniPppLinkStatusTerminateReason
Module: Juniper-PPP-MIB
OID (symbolic): Juniper-PPP-MIB::juniPppLinkStatusTerminateReason
OID (numeric): 1.3.6.1.4.1.4874.2.2.11.1.1.1.1.1
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-only
Description: Reason the PPP link was terminated: none None. other Not specified. adminDisable Interface administratively disabled. lowerLayerDown Underlying interface is down. noUpperInterface No interface above PPP. authenticationFailure Authentication failed. peerTerminated Peer initiated termination. peerRenegotiated Peer initiated renegotiation. maxRetriesExceeded Maximum number of config retries exceeded. negotiationFailure Failed to negotiate LCP option. See juniPppLinkStatusTerminateNegFailOption. keepaliveFailure Keepalive failed. sessionTimeout Maximum session period expired. inactivityTimeout Maximum inactivity period expired. addressLeaseExpired Lease for network address expired. adminLogout Session administratively terminated. tunnelFailed Associated tunnel failed. tunnelDisconnected Associated tunnel disconnected. loopback Loopback detected.
What is juniPppLinkStatusTerminateReason?
This enumerated value records why the PPP link most recently went down, such as adminDisable, lowerLayerDown, authenticationFailure, peerTerminated, peerRenegotiated, or maxRetriesExceeded. An admin reads it right after a link drop to tell a deliberate shutdown apart from an authentication problem or the peer hanging up. For example, seeing authenticationFailure here points straight to a bad CHAP/PAP secret rather than a cabling or carrier issue.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.4874.2.2.11.1.1.1.1.1 snmpwalk -v2c -c public <target> Juniper-PPP-MIB::juniPppLinkStatusTerminateReason
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.4874.2.2.11.1.1.1.1.1.1 snmpget -v2c -c public <target> Juniper-PPP-MIB::juniPppLinkStatusTerminateReason.1
Start monitoring Juniper Networks E-series router (PPP link/LCP/keepalive status) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the Juniper-PPP-MIB::juniPppLinkStatusTerminateReason OID value, configure state conditions and alerts, and monitor any Juniper Networks E-series router (PPP link/LCP/keepalive status) from a single console.
OID Breakdown
Upper-level ancestors (10 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.4874 | juniperUni | Juniper-UNI-SMI |
| 1.3.6.1.4.1.4874.2 | juniperUniMibs | Juniper-UNI-SMI |
| 1.3.6.1.4.1.4874.2.2 | juniMibs | Juniper-MIBs |
| 1.3.6.1.4.1.4874.2.2.11 | juniPppMIB | Juniper-MIBs |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.4874.2.2.11.1 | juniPppObjects | Juniper-PPP-MIB |
| 1.3.6.1.4.1.4874.2.2.11.1.1 | juniPppLcp | Juniper-PPP-MIB |
| 1.3.6.1.4.1.4874.2.2.11.1.1.1 | juniPppLinkStatusTable | Juniper-PPP-MIB |
| 1.3.6.1.4.1.4874.2.2.11.1.1.1.1 | juniPppLinkStatusEntry | Juniper-PPP-MIB |
| 1.3.6.1.4.1.4874.2.2.11.1.1.1.1.1 | juniPppLinkStatusTerminateReason | Juniper-PPP-MIB |