All MIBs › Juniper-PPP-MIB › juniPppIpConfigIpcpLockout
juniPppIpConfigIpcpLockout
Module: Juniper-PPP-MIB
OID (symbolic): Juniper-PPP-MIB::juniPppIpConfigIpcpLockout
OID (numeric): 1.3.6.1.4.1.4874.2.2.11.1.3.2.1.7
Node type: OBJECT-TYPE
Type: JuniEnable
Access: read-write
Description: Enables IPCP lockout. It determines whether this NCP can be negotiated when the interface is already running a different NCP. On enabling this option, the IPCP negotiation will be blocked after a different NCP service is up and waited for 10 seconds for IPCP initiation from peer.
What is juniPppIpConfigIpcpLockout?
When enabled, this blocks IPCP from being negotiated on this interface once a different network-control protocol is already running, holding IPCP negotiation off for 10 seconds while waiting for the peer to initiate it. Admins use it to prevent IPCP and another NCP (such as IPv6CP) from racing each other during session setup. For example, enabling this on a dual-stack access interface can avoid a race condition where both IPCP and IPv6CP try to come up simultaneously.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.4874.2.2.11.1.3.2.1.7 snmpwalk -v2c -c public <target> Juniper-PPP-MIB::juniPppIpConfigIpcpLockout
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.4874.2.2.11.1.3.2.1.7.1 snmpget -v2c -c public <target> Juniper-PPP-MIB::juniPppIpConfigIpcpLockout.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.4874.2.2.11.1.3.2.1.7.1 s <value>
Start monitoring Juniper Networks E-series router (PPP link/LCP/keepalive status) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the Juniper-PPP-MIB::juniPppIpConfigIpcpLockout OID value, configure state conditions and alerts, and monitor any Juniper Networks E-series router (PPP link/LCP/keepalive status) from a single console.
OID Breakdown
Upper-level ancestors (10 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.4874 | juniperUni | Juniper-UNI-SMI |
| 1.3.6.1.4.1.4874.2 | juniperUniMibs | Juniper-UNI-SMI |
| 1.3.6.1.4.1.4874.2.2 | juniMibs | Juniper-MIBs |
| 1.3.6.1.4.1.4874.2.2.11 | juniPppMIB | Juniper-MIBs |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.4874.2.2.11.1 | juniPppObjects | Juniper-PPP-MIB |
| 1.3.6.1.4.1.4874.2.2.11.1.3 | juniPppIp | Juniper-PPP-MIB |
| 1.3.6.1.4.1.4874.2.2.11.1.3.2 | juniPppIpConfigTable | Juniper-PPP-MIB |
| 1.3.6.1.4.1.4874.2.2.11.1.3.2.1 | juniPppIpConfigEntry | Juniper-PPP-MIB |
| 1.3.6.1.4.1.4874.2.2.11.1.3.2.1.7 | juniPppIpConfigIpcpLockout | Juniper-PPP-MIB |