Juniper-PPP-MIB :: juniPppOsiConfigAdminStatus

MIB Reference — IPNetwork Monitor · Updated September 26, 2026

All MIBs › Juniper-PPP-MIB › juniPppOsiConfigAdminStatus

juniPppOsiConfigAdminStatus

Module: Juniper-PPP-MIB

OID (symbolic): Juniper-PPP-MIB::juniPppOsiConfigAdminStatus

OID (numeric): 1.3.6.1.4.1.4874.2.2.11.1.4.2.1.1

Node type: OBJECT-TYPE

Type: INTEGER

Access: read-write

Description: The immediate desired status of the OSI network protocol. Setting this object to open will inject an administrative open event into the OSI network protocol's finite state machine. Setting this object to close will inject an administrative close event into the OSI network protocol's finite state machine.

What is juniPppOsiConfigAdminStatus?

Setting this to open injects an administrative-open event into the OSI network protocol's finite state machine on this PPP interface, and setting it to close injects an administrative-close event. Admins use it to manually bring the OSI network layer up or down on a link without touching the PPP link itself. For example, an admin would set this to close to disable OSI service on a link while leaving IP service running.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.4874.2.2.11.1.4.2.1.1
snmpwalk -v2c -c public <target> Juniper-PPP-MIB::juniPppOsiConfigAdminStatus

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.4874.2.2.11.1.4.2.1.1.1
snmpget -v2c -c public <target> Juniper-PPP-MIB::juniPppOsiConfigAdminStatus.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.4874.2.2.11.1.4.2.1.1.1 i <value>

Start monitoring Juniper Networks E-series router (PPP link/LCP/keepalive status) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the Juniper-PPP-MIB::juniPppOsiConfigAdminStatus OID value, configure state conditions and alerts, and monitor any Juniper Networks E-series router (PPP link/LCP/keepalive status) from a single console.

OID Breakdown

Upper-level ancestors (10 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.4874juniperUniJuniper-UNI-SMI
1.3.6.1.4.1.4874.2juniperUniMibsJuniper-UNI-SMI
1.3.6.1.4.1.4874.2.2juniMibsJuniper-MIBs
1.3.6.1.4.1.4874.2.2.11juniPppMIBJuniper-MIBs
Numeric OIDNameModule
1.3.6.1.4.1.4874.2.2.11.1juniPppObjectsJuniper-PPP-MIB
1.3.6.1.4.1.4874.2.2.11.1.4juniPppOsiJuniper-PPP-MIB
1.3.6.1.4.1.4874.2.2.11.1.4.2juniPppOsiConfigTableJuniper-PPP-MIB
1.3.6.1.4.1.4874.2.2.11.1.4.2.1juniPppOsiConfigEntryJuniper-PPP-MIB
1.3.6.1.4.1.4874.2.2.11.1.4.2.1.1juniPppOsiConfigAdminStatusJuniper-PPP-MIB