All MIBs › EXPRESSGS-MIB
Category: Device Management, Technology: Switching/L2, Vendor: Allied Telesis, Vendor: ExaltComm
Description: Manages Express Gigabit Switch configuration, port status, and forwarding table operations.
Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.
What Is EXPRESSGS-MIB?
EXPRESSGS-MIB is a vendor enterprise-specific SNMP module for the "Express Gigabit Switch," exposing management objects for this particular Ethernet switch product line. It covers switch configuration, per-port status, and Layer-2 forwarding-table (MAC address table) operations, alongside an agent-version scalar identifying which revision of this enterprise MIB the device's SNMP agent implements. As hardware/software status data, it lets an operator confirm per-port link states and current forwarding-table contents, and verify the MIB/agent version running on the switch to ensure compatibility with a given management station. No explicit dependency on other MIBs is stated in the available source text, though it likely coexists with standard IF-MIB/BRIDGE-MIB objects for lower-level interface and bridging data. It's typically deployed by network administrators managing Express Gigabit Switch hardware in an Ethernet LAN or backbone environment. Network engineers evaluating or troubleshooting this functionality can download the EXPRESSGS-MIB file directly to load it into their MIB browser.
IPNetwork Monitor allows you to monitor SNMP objects defined in EXPRESSGS-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.
Supported Devices
- Express Gigabit Switch (enterprise Ethernet switch)
Monitoring Examples
No concrete instance objects were supplied for this module beyond an agent-version scalar, so specific table names can't be confirmed; based on its description, an admin would typically poll a per-port status table to check link state and a forwarding-table object to verify MAC address learning, watching for ports going down or the forwarding table failing to update.
What Can Be Monitored
- agent/MIB version
- port link status
- forwarding table entries
- switch configuration
This MIB depends on
Related MIBs
Imported Objects
From RFC-1212
| OBJECT-TYPE |
From RFC-1215
| TRAP-TYPE |
From RFC1155-SMI
| Counter | |
| Gauge | |
| IpAddress | |
| NetworkAddress | |
| TimeTicks | |
| enterprises |
OIDs
| OID symbolic | OID numeric | Type | Access | Description |
|---|---|---|---|---|
| intel | 1.3.6.1.4.1.343 | |||
| mib2ext | 1.3.6.1.4.1.343.6 | |||
| esGigaSwitch | 1.3.6.1.4.1.343.6.13 | |||
| expressGSAgent | 1.3.6.1.4.1.343.6.13.1 | |||
| expressGSAgentGen | 1.3.6.1.4.1.343.6.13.1.1 | |||
| STR expressGSAgentMIBVersion | 1.3.6.1.4.1.343.6.13.1.1.1 | DisplayString | read-only | The version of the Express Gigabit Switch Enterprise Specific MIB that this agent supports. |
| INT expressGSAgentMgrIndex | 1.3.6.1.4.1.343.6.13.1.1.2 | INTEGER | read-only | The value of this object represents the index into the community table that is used to authenticate SNMP requests for this manager. |
| expressGSAgentCommunity | 1.3.6.1.4.1.343.6.13.1.2 | |||
| expressGSCommunityTable | 1.3.6.1.4.1.343.6.13.1.2.1 | not-accessible | ||
| expressGSCommunityEntry | 1.3.6.1.4.1.343.6.13.1.2.1.1 | not-accessible | ||
| INT expressGSCommunityIndex | 1.3.6.1.4.1.343.6.13.1.2.1.1.1 | INTEGER | read-only | An index that uniquely identifies this entry. |
| STR expressGSCommunityString | 1.3.6.1.4.1.343.6.13.1.2.1.1.2 | DisplayString | read-write | The community string included in the SNMP PDU used for authentication purposes. |
| INT expressGSCommunityAddressType | 1.3.6.1.4.1.343.6.13.1.2.1.1.3 | INTEGER | read-write | The type of address associated with this community. If set to any(1), only the community string is authenticated. |
| IP expressGSCommunityAddress | 1.3.6.1.4.1.343.6.13.1.2.1.1.4 | IpAddress | read-write | If the address type is any, then the value of this object is a null string. If the type is ipv4(2), then this value represents a 4 byte IP address. |
| INT expressGSCommunityAccess | 1.3.6.1.4.1.343.6.13.1.2.1.1.5 | INTEGER | read-write | The MIB access supported for this community entry. A Get or GetNext SNMP PDU is authenticated if the value of this object is read-only(2) or read-write(3). A Set request will be honored if the value of this object is read-write(3). If more granular access control is desired, then the value of this object is set to more-specific(4), and the view table should be consulted. This enables the capability to set different access rights to different branches of the MIB for a particular community. |
| INT expressGSCommunityTrapReceiver | 1.3.6.1.4.1.343.6.13.1.2.1.1.6 | INTEGER | read-write | If set to enable(1), this community entry is considered a trap receiver. When the agent generates an SNMP trap, a copy will be sent to this host using this community string. |
| INT expressGSCommunitySecurityLevel | 1.3.6.1.4.1.343.6.13.1.2.1.1.7 | INTEGER | read-write | Secure tables are only accessible from users with security clearance. For example, this table (the community table) is only accessible by parties that have the security clearance. |
| ROW expressGSCommunityStatus | 1.3.6.1.4.1.343.6.13.1.2.1.1.8 | RowStatus | read-write | |
| expressGSAgentWeb | 1.3.6.1.4.1.343.6.13.1.3 | |||
| STR expressGSAgentWebServerURL | 1.3.6.1.4.1.343.6.13.1.3.1 | DisplayString | read-write | The URL of where the document server software is installed. The switch uses this location to find online help and bimapped graphics. Enter the host name or IP address of the HTTP server at the HTTP Server Location prompt, followed by ':2010'. For example, for a host named 'phantom,', enter 'http://phantom:2010'. If no server is desired or installed, set this object to the empty string. |
| STR expressGSAgentWebServerHelpDirectory | 1.3.6.1.4.1.343.6.13.1.3.2 | DisplayString | read-write | The subdirectory that contains the help files on the document server. Typically, this directory is 'help'. |
| expressGSChassis | 1.3.6.1.4.1.343.6.13.3 | |||
| expressGSChassisGen | 1.3.6.1.4.1.343.6.13.3.1 | |||
| INT expressGSChassisType | 1.3.6.1.4.1.343.6.13.3.1.1 | INTEGER | read-only | The model of the chassis that this agent is managing. |
| INT expressGSChassisSlots | 1.3.6.1.4.1.343.6.13.3.1.2 | INTEGER | read-only | The number of slots available in this chassis. If this chassis is a stackable chassis, the total capacity of stacking units. |
| expressGSInventory | 1.3.6.1.4.1.343.6.13.3.2 | |||
| expressGSInventoryTable | 1.3.6.1.4.1.343.6.13.3.2.1 | not-accessible | A table of inventory information. | |
| expressGSInventoryEntry | 1.3.6.1.4.1.343.6.13.3.2.1.1 | not-accessible | Inventory information related to this device. | |
| RES expressGSInventoryResourceType | 1.3.6.1.4.1.343.6.13.3.2.1.1.1 | ResourceType | read-only | The resource class of this inventory item. |
| RES expressGSInventoryResourceIndex | 1.3.6.1.4.1.343.6.13.3.2.1.1.2 | ResourceId | read-only | The resource identifier of this inventory item. |
| STR expressGSInventoryModelNumber | 1.3.6.1.4.1.343.6.13.3.2.1.1.3 | DisplayString | read-only | The model number of this device. |
| STR expressGSInventorySerialNumber | 1.3.6.1.4.1.343.6.13.3.2.1.1.4 | DisplayString | read-only | The serial number of this device. |
| STR expressGSInventoryVersion | 1.3.6.1.4.1.343.6.13.3.2.1.1.5 | DisplayString | read-only | The revision number of this device. |
| STR expressGSInventoryManufactureInfo | 1.3.6.1.4.1.343.6.13.3.2.1.1.6 | DisplayString | read-only | Information related to the manufacturing of this device. |
| STR expressGSInventoryScratchPad | 1.3.6.1.4.1.343.6.13.3.2.1.1.7 | DisplayString | read-write | A scratch pad area available for keeping user-supplied inventory information. |
| expressGSPowerSystems | 1.3.6.1.4.1.343.6.13.3.3 | |||
| expressGSPowerSupplies | 1.3.6.1.4.1.343.6.13.3.3.1 | |||
| expressGSPowerSupplyTable | 1.3.6.1.4.1.343.6.13.3.3.1.1 | not-accessible | A table of information related to each power supply in the system. | |
| expressGSPowerSupplyEntry | 1.3.6.1.4.1.343.6.13.3.3.1.1.1 | not-accessible | An entry providing information about a particular power supply in the system. | |
| RES expressGSPowerSupplyIndex | 1.3.6.1.4.1.343.6.13.3.3.1.1.1.1 | ResourceId | read-only | An index that uniquely identifies this power supply. This index corresponds to the expressGSResourceIndex of the power supply type resource. |
| INT expressGSPowerSupplyType | 1.3.6.1.4.1.343.6.13.3.3.1.1.1.2 | INTEGER | read-only | An enumerated integer describing the type of power supply. |
| INT expressGSPowerSupplyStatus | 1.3.6.1.4.1.343.6.13.3.3.1.1.1.3 | INTEGER | read-only | The status of this power supply. Okay(1) indicates the power supply is operating properly. Faulty(2) indicates that the power supply is not functioning properly. In this case, more information can be determined from the other power supply attributes. |
| INT expressGSPowerSupplyInputStatus | 1.3.6.1.4.1.343.6.13.3.3.1.1.1.4 | INTEGER | read-only | The status of the input power feed (e.g. the AC power cord) to this power supply. |
| INT expressGSPowerSupplyOutputStatus | 1.3.6.1.4.1.343.6.13.3.3.1.1.1.5 | INTEGER | read-only | The status of the output power from this power supply. |
| INT expressGSPowerSupplyOutputCapacity | 1.3.6.1.4.1.343.6.13.3.3.1.1.1.6 | INTEGER | read-only | The total capacity of power supplied by this supply in Watts. |
| expressGSPowerMgmtGen | 1.3.6.1.4.1.343.6.13.3.3.2 | |||
| INT expressGSPowerCapacity | 1.3.6.1.4.1.343.6.13.3.3.2.1 | INTEGER | read-only | The total capacity (in Watts) of power available (currently) in the system. |
| INT expressGSPowerUsed | 1.3.6.1.4.1.343.6.13.3.3.2.2 | INTEGER | read-only | The total power (in Watts) currently being consumed in the system. |
| expressGSPowerMgmtCtl | 1.3.6.1.4.1.343.6.13.3.3.3 | |||
| expressGSPowerControlTable | 1.3.6.1.4.1.343.6.13.3.3.3.1 | not-accessible | This table manages the power attributes associated with each module. | |
| expressGSPowerControlEntry | 1.3.6.1.4.1.343.6.13.3.3.3.1.1 | not-accessible | An entry in the power control table manages the power attributes of the specified module. | |
| INT expressGSPowerControlUsed | 1.3.6.1.4.1.343.6.13.3.3.3.1.1.1 | INTEGER | read-only | The total power (in Watts) used by this module. |
| INT expressGSPowerControlPriority | 1.3.6.1.4.1.343.6.13.3.3.3.1.1.2 | INTEGER | read-write | The priority of this module to be considered in the event of a power supply failure where the amount of power used exceeds the system capacity. Low priority modules will be powered down before higher priority modules. |
| INT expressGSPowerControlMode | 1.3.6.1.4.1.343.6.13.3.3.3.1.1.3 | INTEGER | read-write | Normally, a module power mode is enable(1). In the event of a power supply failure resulting in a power shortage, or in the event of this module being inserted without enough available power, the mode will be poweredDown(3). Setting this object to the value of poweredDown(3) will result in an error. When enough power is available, the module will power back up when in this mode. A module may be powered down through administrative action by setting the value of this object to disable(2). In this mode, the module will remain powered down until the mode is set back to enable. |
| expressGSTemperature | 1.3.6.1.4.1.343.6.13.3.4 | |||
| expressGSTempTable | 1.3.6.1.4.1.343.6.13.3.4.1 | not-accessible | A table of information related to the temperature within the system. | |
| expressGSTempEntry | 1.3.6.1.4.1.343.6.13.3.4.1.1 | not-accessible | An entry providing temperature information related to a specific temperature probe in the system. | |
| RES expressGSTempIndex | 1.3.6.1.4.1.343.6.13.3.4.1.1.1 | ResourceId | read-only | A unique index that identifies this temperature probe. This index corresponds to the expressGSResourceIndex for temperature probe type resources. |
| INT expressGSTempValue | 1.3.6.1.4.1.343.6.13.3.4.1.1.2 | INTEGER | read-only | The current temperature reading of this temperature probe in degrees Celsius. |
| INT expressGSTempUpperLimit | 1.3.6.1.4.1.343.6.13.3.4.1.1.3 | INTEGER | read-write | The upper temperature limit of this temperature probe in degrees Celsius. |
| INT expressGSTempUpperWarning | 1.3.6.1.4.1.343.6.13.3.4.1.1.4 | INTEGER | read-write | The upper temperature warning of this temperature probe in degrees Celsius. |
| INT expressGSTempLowerWarning | 1.3.6.1.4.1.343.6.13.3.4.1.1.5 | INTEGER | read-write | The lower temperature warning of this temperature probe in degrees Celsius. |
| INT expressGSTempLowerLimit | 1.3.6.1.4.1.343.6.13.3.4.1.1.6 | INTEGER | read-write | The lower temperature limit of this temperature probe in degrees Celsius. |
| expressGSModules | 1.3.6.1.4.1.343.6.13.3.5 | |||
| expressGSModuleTable | 1.3.6.1.4.1.343.6.13.3.5.1 | not-accessible | A table of information related to the modules in the system. | |
| expressGSModuleEntry | 1.3.6.1.4.1.343.6.13.3.5.1.1 | not-accessible | Attributes related to managing this module. | |
| RES expressGSModuleIndex | 1.3.6.1.4.1.343.6.13.3.5.1.1.1 | ResourceId | read-only | An index that uniquely identifies this module. This index corresponds to the expressGSResourceIndex associated with module type resources. |
| STR expressGSModuleName | 1.3.6.1.4.1.343.6.13.3.5.1.1.2 | DisplayString | read-write | A user-assignable name for this module. |
| INT expressGSModuleType | 1.3.6.1.4.1.343.6.13.3.5.1.1.3 | INTEGER | read-only | An enumerated integer that is unique for each module model. |
| INT expressGSModuleBaseType | 1.3.6.1.4.1.343.6.13.3.5.1.1.4 | INTEGER | read-only | The base type of this module. This object is used to describe the core functions of the module. Often, base designs are derived into multiple module types which are typically just packaging variations (e.g. changing the connector types). The value of this object corresponds to the value of expressGSResourceBaseType. |
| INT expressGSModuleSlotWidth | 1.3.6.1.4.1.343.6.13.3.5.1.1.5 | INTEGER | read-only | The number of slots that this module occupies. |
| INT expressGSModuleSlotOffset | 1.3.6.1.4.1.343.6.13.3.5.1.1.6 | INTEGER | read-only | The slot offset (one based) that identifies, along with the slot width and slot location, the actual slots that this module occupies. The offset identifies which slot within the width of the module that this module reports as its slot number. |
| INT expressGSModulePorts | 1.3.6.1.4.1.343.6.13.3.5.1.1.7 | INTEGER | read-only | The total number of ports associated with this module. |
| expressGSPorts | 1.3.6.1.4.1.343.6.13.3.6 | |||
| expressGSPortMgt | 1.3.6.1.4.1.343.6.13.3.6.1 | |||
| expressGSPortTable | 1.3.6.1.4.1.343.6.13.3.6.1.1 | not-accessible | A table of information related to every data port in this data networking system. | |
| expressGSPortEntry | 1.3.6.1.4.1.343.6.13.3.6.1.1.1 | not-accessible | A data port associated with this data networking system. | |
| RES expressGSPortIndex | 1.3.6.1.4.1.343.6.13.3.6.1.1.1.1 | ResourceId | read-only | An index that uniquely identifies this port. Typically, ports are child resources of the module that contains them. In these cases, ports are identified by their module and their relative physical position on that module. |
| STR expressGSPortName | 1.3.6.1.4.1.343.6.13.3.6.1.1.1.2 | DisplayString | read-write | The user-assigned name for this port. Note that setting this object for an internal(1) port results in an error. |
| INT expressGSPortType | 1.3.6.1.4.1.343.6.13.3.6.1.1.1.3 | INTEGER | read-only | An internal(1) port does not have an external connection. An ether-ten-oneHundred(2) port is an Ethernet port which can be switched between 10 and 100 megabits per second. An ether-oneHundred(3) port is a 100 megabits per second Fast Ethernet port. An ether-gigabit(4) port is a 1000 megabits per second Gigabit Ethernet port. |
| INT expressGSPortBaseType | 1.3.6.1.4.1.343.6.13.3.6.1.1.1.4 | INTEGER | read-only | The base type of this port. This object may be useful to help manage new port types that are similar in nature to legacy port types. |
| INT expressGSPortMode | 1.3.6.1.4.1.343.6.13.3.6.1.1.1.5 | INTEGER | read-write | The mode of this port. When set to enable(1), this port passes data. When set to disable(2), the port does not receive or transmit data, nor does it generate port-level signaling e.g. link integrity pulses. Note that setting an internal(1) port to disable(2) results in an error. |
| INT expressGSPortStatus | 1.3.6.1.4.1.343.6.13.3.6.1.1.1.6 | INTEGER | read-only | The status of this port. Disabled(1) means that this port has been disabled through management action. Okay(2) indicates that this port is operating properly. Warning(3) indicates that this port is encountering an abnormal condition that, however, allows it to continue to pass data. LinkFailure(5) means that this port is unable to pass data. |
| INT expressGSPortConnector | 1.3.6.1.4.1.343.6.13.3.6.1.1.1.7 | INTEGER | read-only | The connector type associated with this port. |
| INT expressGSPortSpeedState | 1.3.6.1.4.1.343.6.13.3.6.1.1.1.8 | INTEGER | read-only | The data rate of this port in bits per second. For example, a standard Ethernet port (e.g. 10BASE-T) would indicate a value of ten-megabits-per-second((1) indicating that the port supports a data rate of 10Mb/s. For ports that can change their data rate (e.g. 10/100 ports), the value of this object indicates the current state of the port's speed capability. |
| INT expressGSPortDuplexState | 1.3.6.1.4.1.343.6.13.3.6.1.1.1.9 | INTEGER | read-only | The value of this object indicates whether this port is operating in full- or half-duplex mode. The value under-negotiation(3) indicates that the port has not selected an operational duplex setting yet. |
| RES expressGSPortGroupBinding | 1.3.6.1.4.1.343.6.13.3.6.1.1.1.10 | ResourceId | read-only | Each port is associated with a port group. Typically, a port will belong to a port group of one and the value of this object will be the same as the port index for this instance. That is, this port will point to itself. The intent of this object is to help manage ports that have hierarchical relationships. For example, an ATM port typically has a physical port and multiple logical ports (e.g. each logical port corresponding to an instance of an emulated LAN). In this case, each LANE instance would refer to the instance of the physical port associated with the ATM front-end. Another example is an FDDI DAS type port. In this case, there is a logical port associated with the FDDI switch port which is connected to the two FDDI physical port connectors. The physical FDDI ports both point to the logical instance of an FDDI port. |
| expressGSPortFlowControlMgt | 1.3.6.1.4.1.343.6.13.3.6.2 | |||
| expressGSPortFlowControlTable | 1.3.6.1.4.1.343.6.13.3.6.2.1 | not-accessible | A table of ports that support flow control. | |
| expressGSPortFlowControlEntry | 1.3.6.1.4.1.343.6.13.3.6.2.1.1 | not-accessible | Configuration objects related to port based flow control. | |
| INT expressGSPortFlowControlMode | 1.3.6.1.4.1.343.6.13.3.6.2.1.1.21 | INTEGER | read-write | Flow control is used to prevent or reduce the dropping of frames due to the lack of buffer space. Overall, networks are more efficient when a sending station is asked to pause in its sending process, rather than having the transmitted frames dropped. Flow control is not as efficient when used in conjunction with a shared ports, i.e. when used with a repeater. Therefore, flow control is not recommended for a port connected to shared topologies. Flow control is most effective when the port is directly connected to an end-station, especially when connected to a server. Flow control is recommended for ports connected directly to end-stations. When the port is in half-duplex mode, back pressure is used to control the incoming flow. Back pressure essentially forces collisions for short periods of time. When the port is in full-duplex mode, IEEE 802.3 standard pause frames are used to control the incoming flow. Note that setting an ether-gigabit(4) port to enable-with-aggressive-backoff(3) results in an error. |
| expressGSPortDuplexMgt | 1.3.6.1.4.1.343.6.13.3.6.3 | |||
| expressGSPortDuplexTable | 1.3.6.1.4.1.343.6.13.3.6.3.1 | not-accessible | A table of ports that support full- and half-duplex data communications. | |
| expressGSPortDuplexEntry | 1.3.6.1.4.1.343.6.13.3.6.3.1.1 | not-accessible | A port device configuration that controls the duplex mode of this port. | |
| INT expressGSPortDuplexMode | 1.3.6.1.4.1.343.6.13.3.6.3.1.1.31 | INTEGER | read-write | A point-to-point Ethernet port may be configured to support half or full duplex communications. A full-duplex(2) port transmits and receives data concurrently, effectively doubling the data rate of the port. Half-duplex(1) ports transmit or receive data, but not at the same time. Half-duplex ports use CSMA/CD as the access method to the network. Ports that are connected to shared segments (i.e. connected to a repeater), should always be configured to be in half-duplex mode. This object indicates the desired duplexity of this port. If auto-negotiation is turned on for this port, then this value is ignored. |
| expressGSPortSpeedMgt | 1.3.6.1.4.1.343.6.13.3.6.4 | |||
| expressGSPortSpeedTable | 1.3.6.1.4.1.343.6.13.3.6.4.1 | not-accessible | A table of port devices that support multiple speeds. | |
| expressGSPortSpeedEntry | 1.3.6.1.4.1.343.6.13.3.6.4.1.1 | not-accessible | A port that supports multiple speeds. | |
| INT expressGSPortSpeedMode | 1.3.6.1.4.1.343.6.13.3.6.4.1.1.41 | INTEGER | read-write | Some of these values may not be applicable to certain types of ports. This object indicates the desired data rate of this port. If auto-negotiation is turned on for this port, then this value is ignored. |
| expressGSPortAutoNegotiationMgt | 1.3.6.1.4.1.343.6.13.3.6.5 | |||
| expressGSPortAutoNegotiationTable | 1.3.6.1.4.1.343.6.13.3.6.5.1 | not-accessible | A table of ports that support auto-negotiation. | |
| expressGSPortAutoNegotiationEntry | 1.3.6.1.4.1.343.6.13.3.6.5.1.1 | not-accessible | Attributes associated with a port that supports auto-negotiation. | |
| INT expressGSPortAutoNegotiationMode | 1.3.6.1.4.1.343.6.13.3.6.5.1.1.51 | INTEGER | read-write | Setting this object to autoNegotiate(1) causes this port to negotiate the duplex mode and the port speed, subject to the port's capabilities. |
| INT expressGSPortAutoNegotiationSpeedAdvertisement | 1.3.6.1.4.1.343.6.13.3.6.5.1.1.52 | INTEGER | read-write | The speed to advertise while auto-negotiating. |
| INT expressGSPortAutoNegotiationDuplexAdvertisement | 1.3.6.1.4.1.343.6.13.3.6.5.1.1.53 | INTEGER | read-write | The duplexity to advertise while auto-negotiating. |
| expressGSPortRateLimitMgt | 1.3.6.1.4.1.343.6.13.3.6.6 | |||
| expressGSPortRateLimitTable | 1.3.6.1.4.1.343.6.13.3.6.6.1 | not-accessible | A table of ports that support the ability to limit the rate of floods. | |
| expressGSPortRateLimitEntry | 1.3.6.1.4.1.343.6.13.3.6.6.1.1 | not-accessible | The rate limit configuration associated with this port. | |
| INT expressGSPortRateLimitMode | 1.3.6.1.4.1.343.6.13.3.6.6.1.1.61 | INTEGER | read-write | This object configures whether rate limiting is enabled for this port (the factory default is enable(1)). Enabling rate limiting for this port prevents floods from overwhelming the output buffer associated with this port. Normally, rate limiting will only consider frames that are flooded to this port. This typically does not include known multicasts. However, known multicasts can be included in the flood limiting by setting the value of this object to enableIncludeKnownMulticast(3). |
| INT expressGSPortRateLimitRate | 1.3.6.1.4.1.343.6.13.3.6.6.1.1.62 | INTEGER | read-write | The percentage of the port's transmitted data allowed to be floods (or floods and known multicasts). For example, the factory default setting of twenty-percent(4) indicates that 20% of the data rate can be floods. For 10 Mb/s ports, this is equivalent to a maximum rate of approximately 3000 flooded pps; for 100 Mb/s ports, a maximum rate of approximately 30,000 flooded pps. |
| INT expressGSPortRateLimitBurstSize | 1.3.6.1.4.1.343.6.13.3.6.6.1.1.63 | INTEGER | read-write | The maximum number of consecutive transmitted flooded (or flooded and known multicasted) packets. Typically, the burst size is set so as to not overflow the port's buffer. |
| expressGSPortPacePriorityMgt | 1.3.6.1.4.1.343.6.13.3.6.7 | |||
| expressGSPortPacePriorityTable | 1.3.6.1.4.1.343.6.13.3.6.7.1 | not-accessible | A table of ports that support the ability to classify frame priority based on 3Com Pace(r) Prioritization. | |
| expressGSPortPacePriorityEntry | 1.3.6.1.4.1.343.6.13.3.6.7.1.1 | not-accessible | A port that supports 3Com Pace(r) priority. | |
| INT expressGSPortPacePriorityMode | 1.3.6.1.4.1.343.6.13.3.6.7.1.1.71 | INTEGER | read-write | When Pace priority is enabled, this port will detect frames that use 3Com Corporation's Pace(r) Priority signaling. Frames signaled with priority in this manner are mapped to traffic priority level 4 (on scale of 0-7). |
| expressGSPortCategoryMgt | 1.3.6.1.4.1.343.6.13.3.6.8 | |||
| expressGSPortCategoryTable | 1.3.6.1.4.1.343.6.13.3.6.8.1 | not-accessible | A table of ports that support the port category feature. Currently, all ports support this capability. | |
| expressGSPortCategoryEntry | 1.3.6.1.4.1.343.6.13.3.6.8.1.1 | not-accessible | A port that supports port categorization. | |
| INT expressGSPortCategoryMode | 1.3.6.1.4.1.343.6.13.3.6.8.1.1.81 | INTEGER | read-write | By default, all ports are considered service ports. A service port is a port that provides a networks service such as a connection to a server, other switches, or the like. A service port will trigger the service port event for status changes with the alarm severity and will trigger an alarm in the alarm table on link failure. In contrast, user ports trigger the user link event with warning severity. They do not trigger an alarm upon link failures. User ports are useful to prevent floods of traps or entries in the alarm table. This is especially true for ports connected to user hosts that power up in the morning and power down again at the end of the work day. |
| expressGSBufferMgt | 1.3.6.1.4.1.343.6.13.3.7 | |||
| expressGSBufferTable | 1.3.6.1.4.1.343.6.13.3.7.1 | not-accessible | A table of frame buffers in the system. | |
| expressGSBufferEntry | 1.3.6.1.4.1.343.6.13.3.7.1.1 | not-accessible | Objects related to the management of this frame buffer. | |
| RES expressGSBufferIndex | 1.3.6.1.4.1.343.6.13.3.7.1.1.1 | ResourceId | read-only | The unique index that identifies this buffer within the system. Buffers are indexed first by their module association and then a unique index within that module. |
| RES expressGSBufferFabricPort | 1.3.6.1.4.1.343.6.13.3.7.1.1.2 | ResourceId | read-only | The switch fabric port associated with this buffer. |
| INT expressGSBufferFabricPortDirection | 1.3.6.1.4.1.343.6.13.3.7.1.1.3 | INTEGER | read-only | The value of this object indicates whether the buffer is used for buffering frames going into the switching fabric or coming out of the fabric. |
| RES expressGSBufferSwitchPort | 1.3.6.1.4.1.343.6.13.3.7.1.1.4 | ResourceId | read-only | The switch port associated with this frame buffer. Some buffers are not associated with any one switch port. In those cases, the value of the resource ID returned will be the null resource ID. |
| INT expressGSBufferMemory | 1.3.6.1.4.1.343.6.13.3.7.1.1.5 | INTEGER | read-only | The amount of memory available for frame buffering in Kilobytes (KB). |
| INT expressGSBufferAgeTimer | 1.3.6.1.4.1.343.6.13.3.7.1.1.6 | INTEGER | read-write | Configures the timer used for aging frames in this buffer. If the timer expires for a frame, the frame is dropped and the event is counted in the stale drop counter. By default, the age timer is set to a 0.25 seconds (quarter of a second). The actual time that a frame may be aged out may vary. When set to a quarter of a second (250ms), the actual time may vary between 160ms and 320ms. When set to a second (1000ms), the time may vary between 640ms and 1.28 seconds (1028ms). |
| INT expressGSBufferPriorityServicing | 1.3.6.1.4.1.343.6.13.3.7.1.1.7 | INTEGER | read-write | The value of this object configures how often the normal priority queue is serviced relative to the high priority queue. By default, the normal priority queue is serviced every thousand frames(3). This means that the normal priority queue is guaranteed to be serviced after servicing, at most, one thousand high priority frames. It is important to service the normal priority queue for two reasons. One is to prevent starvation for frames on the normal priority queue. The other reason is that frames cannot be aged if they are not serviced (see the age timer). |
| INT expressGSBufferPriorityAllocation | 1.3.6.1.4.1.343.6.13.3.7.1.1.8 | INTEGER | read-write | This object controls how much of the total buffer space should be allocated to high priority queue. Please be warned that setting this object to a different value causes the associated buffer to reset, causing a short loss of data. Setting the value of this object to none(1) not only allocates the entire buffer space to normal traffic, but also has the side effect of disabling the priority threshold. In other words, all traffic will be considered as normal priority traffic. |
| INT expressGSBufferPriorityThreshold | 1.3.6.1.4.1.343.6.13.3.7.1.1.9 | INTEGER | read-write | This object configures the threshold for which frames are considered high priority. Frames may have a priority classification ranging from 0-7, 7 being the highest. By default, every frame that has priority 4 (four(5)) or above is considered a high priority frame and is buffered accordingly. If this buffer does not have any buffer space allocated for high priority frames, then the buffer threshold will be none(1). Setting this object to a different value without allocating buffer space to high priority traffic will result in an error. |
| INT expressGSBufferCongestion | 1.3.6.1.4.1.343.6.13.3.7.1.1.10 | INTEGER | read-only | This object indicates whether this buffer is in a congested state.. |
| CTR expressGSBufferHighOverflowDrops | 1.3.6.1.4.1.343.6.13.3.7.1.1.11 | Counter | read-only | The count of the number of high priority frames dropped due to the high priority queue overflowing. |
| CTR expressGSBufferLowOverflowDrops | 1.3.6.1.4.1.343.6.13.3.7.1.1.12 | Counter | read-only | The count of the number of low priority frames dropped due to the low priority queue overflowing. |
| CTR expressGSBufferHighStaleDrops | 1.3.6.1.4.1.343.6.13.3.7.1.1.13 | Counter | read-only | The count of the number of high priority frames dropped due to being in the high priority queue too long (the frame aged out). |
| CTR expressGSBufferLowStaleDrops | 1.3.6.1.4.1.343.6.13.3.7.1.1.14 | Counter | read-only | The count of the number of low priority frames dropped due to being in the low priority queue too long (the frame aged out). |
| CTR expressGSBufferCongestionDrops | 1.3.6.1.4.1.343.6.13.3.7.1.1.16 | Counter | read-only | The count of the number of frames dropped due to the destination (output) buffer being congested. |
| expressGSSwitching | 1.3.6.1.4.1.343.6.13.5 | |||
| expressGSSwitchingLayerII | 1.3.6.1.4.1.343.6.13.5.1 | |||
| expressGSSwitchGen | 1.3.6.1.4.1.343.6.13.5.1.1 | |||
| INT expressGSSwitchSTPConfig | 1.3.6.1.4.1.343.6.13.5.1.1.1 | INTEGER | read-write | When set to ieee8021dStp(1), the switch executes spanning tree conformant to the IEEE 802.1D bridging standard. The switch runs one instance of spanning tree. When set to stpPerVlan(2), the switch executes a separate instance of spanning tree for each virtual LAN. This configuration conforms to the model that instances of virtual LANs within the switch are separate virtual bridging functions. This method may not work well with bridge/routers that are also running spanning tree. When set to twoLayerStp(3), the switch executes a two-layer spanning tree to prevent loops. Two layer spanning tree creates a higher 'plane' of spanning tree between VLAN devices. This method of running spanning tree is 'plug and play' with bridge/router type devices and also scales better than the other two methods for large environments. When set to disable(4), spanning tree is disabled in the switch. |
| INT expressGSSwitchAgingTime | 1.3.6.1.4.1.343.6.13.5.1.1.2 | INTEGER | read-write | The timeout period in seconds for aging dynamically learned forwarding information. A default of 300 seconds is recommended. An aged entry is marked invalid, but is not removed from the Address Forwarding Table, because it is assumed that it will be relearned to the same location within the table. |
| INT expressGSSwitchSuperAgingTime | 1.3.6.1.4.1.343.6.13.5.1.1.3 | INTEGER | read-write | The timeout period in days for removing stale invalid entries from the Address Forwarding Table. A superaged entry is removed completely from the Address Forwarding Table, because it is assumed that the entry will never be relearned. |
| expressGSBridgeMgmt | 1.3.6.1.4.1.343.6.13.5.1.2 | |||
| expressGSBridgeTable | 1.3.6.1.4.1.343.6.13.5.1.2.1 | not-accessible | A table of Spanning Tree information for every bridge in the system. | |
| expressGSBridgeEntry | 1.3.6.1.4.1.343.6.13.5.1.2.1.1 | not-accessible | ||
| RES expressGSBridgeIndex | 1.3.6.1.4.1.343.6.13.5.1.2.1.1.1 | ResourceId | read-only | An index that uniquely identifies this bridge. |
| INT expressGSBridgeType | 1.3.6.1.4.1.343.6.13.5.1.2.1.1.2 | INTEGER | read-only | Indicates whether this is a legacy dot1d bridge consisting of all switch ports or a virtual bridge consisting of all virtual subports for a particular Vlan. |
| INT expressGSBridgeMode | 1.3.6.1.4.1.343.6.13.5.1.2.1.1.3 | INTEGER | read-write | Used to enable or disable Spanning Tree for this bridge. When set to disable(2), all BPDUs are forwarded like regular multicast packets. The default value is enable(1). |
| INT expressGSBridgeStatus | 1.3.6.1.4.1.343.6.13.5.1.2.1.1.4 | INTEGER | read-only | The enable/disable status of this bridge. This object incorporates the setting of the expressGSSwitchSTPConfig object. When expressGSSwitchSTPConfig is set such that this bridge will not be active, expressGSBridgeStatus returns disabled(2). If expressGSSwitchSTPConfig is set such that this bridge will be active, and expressGSBridgeMode is enable(1), this object returns enabled(2). |
| INT expressGSBridgeStpPriority | 1.3.6.1.4.1.343.6.13.5.1.2.1.1.5 | INTEGER | read-write | The priority value of the Bridge Identifier. See dot1dStpPriority. |
| TIK expressGSBridgeStpTimeSinceTopologyChange | 1.3.6.1.4.1.343.6.13.5.1.2.1.1.6 | TimeTicks | read-only | The time since the last topology change was detected. See dot1dStpTimeSinceTopologyChange. |
| CTR expressGSBridgeStpTopChanges | 1.3.6.1.4.1.343.6.13.5.1.2.1.1.7 | Counter | read-only | The total number of topology changes. See dot1dStpTopChanges |
| BRI expressGSBridgeStpDesignatedRoot | 1.3.6.1.4.1.343.6.13.5.1.2.1.1.8 | BridgeId | read-only | The bridge considered to be root by this node. See dot1dStpDesignatedRoot. |
| INT expressGSBridgeStpRootCost | 1.3.6.1.4.1.343.6.13.5.1.2.1.1.9 | INTEGER | read-only | The cost of the path to the root from this node. See dot1dStpRootCost. |
| INT expressGSBridgeStpRootPort | 1.3.6.1.4.1.343.6.13.5.1.2.1.1.10 | INTEGER | read-only | The port number with the lowest cost path to the root bridge. See dot1dStpRootPort. |
| TIM expressGSBridgeStpMaxAge | 1.3.6.1.4.1.343.6.13.5.1.2.1.1.11 | Timeout | read-only | The maximum age used by this bridge to hold onto STP information before discarding. See dot1dStpMaxAge. |
| TIM expressGSBridgeStpHelloTime | 1.3.6.1.4.1.343.6.13.5.1.2.1.1.12 | Timeout | read-only | The amount of time between configuration BPDUs. See dot1dStpHelloTime. |
| INT expressGSBridgeStpHoldTime | 1.3.6.1.4.1.343.6.13.5.1.2.1.1.13 | INTEGER | read-only | The time value that indicates the interval during which no more than two configuration BPDUs will be sent by this node. See dot1dStpHoldTime. |
| TIM expressGSBridgeStpForwardDelay | 1.3.6.1.4.1.343.6.13.5.1.2.1.1.14 | Timeout | read-only | The amount of time that this node stays in each of the Listening and Learning states. See dot1dStpForwardDelay. |
| TIM expressGSBridgeStpBridgeMaxAge | 1.3.6.1.4.1.343.6.13.5.1.2.1.1.15 | Timeout | read-write | The value of MaxAge when this bridge is the root. See dot1dStpBridgeMaxAge. |
| TIM expressGSBridgeStpBridgeHelloTime | 1.3.6.1.4.1.343.6.13.5.1.2.1.1.16 | Timeout | read-write | The value of HelloTime to use when this bridge is the root. See dot1dStpBridgeHelloTime. |
| TIM expressGSBridgeStpBridgeForwardDelay | 1.3.6.1.4.1.343.6.13.5.1.2.1.1.17 | Timeout | read-write | The value of FowardDelay to use when this bridge is the root. See dot1dStpBridgeForwardDelay. |
| expressGSBridgePortMgmt | 1.3.6.1.4.1.343.6.13.5.1.3 | |||
| expressGSBridgePortTable | 1.3.6.1.4.1.343.6.13.5.1.3.1 | not-accessible | A table of Spanning Tree information for every port that supports Spanning Tree in every bridge in the system | |
| expressGSBridgePortEntry | 1.3.6.1.4.1.343.6.13.5.1.3.1.1 | not-accessible | ||
| RES expressGSBridgePortIndex | 1.3.6.1.4.1.343.6.13.5.1.3.1.1.1 | ResourceId | read-only | An index that uniquely identifies this bridge port. This index corresponds to the expressGSResourceIndex for bridge port type resources. |
| INT expressGSBridgePortPriority | 1.3.6.1.4.1.343.6.13.5.1.3.1.1.2 | INTEGER | read-write | The value of the priority field in the port ID. See dot1dStpPortPriority. The default value is 128. |
| INT expressGSBridgePortState | 1.3.6.1.4.1.343.6.13.5.1.3.1.1.3 | INTEGER | read-only | The port's current state as defined by the Spanning Tree Protocol. See dot1dStpPortState. The virtual port is considered broken if its switch port is blocked. |
| INT expressGSBridgePortEnable | 1.3.6.1.4.1.343.6.13.5.1.3.1.1.4 | INTEGER | read-write | The enabled/disabled status of this port. See dot1dStpPortEnable. The default is enabled(2). |
| INT expressGSBridgePortPathCost | 1.3.6.1.4.1.343.6.13.5.1.3.1.1.5 | INTEGER | read-write | The contribution of this port to the path cost of the paths towards the spanning tree root. See dot1dStpPortPathCost. The default value is dependent on the port speed, trunking mode, and duplexity. |
| BRI expressGSBridgePortDesignatedRoot | 1.3.6.1.4.1.343.6.13.5.1.3.1.1.6 | BridgeId | read-only | The bridge recorded as root for this port's segment. See dot1dStpPortDesignatedRoot. |
| INT expressGSBridgePortDesignatedCost | 1.3.6.1.4.1.343.6.13.5.1.3.1.1.7 | INTEGER | read-only | The path cost of the designated root of the segment connected to this port. See dot1dStpPortDesignatedCost. |
| BRI expressGSBridgePortDesignatedBridge | 1.3.6.1.4.1.343.6.13.5.1.3.1.1.8 | BridgeId | read-only | The bridge identifier of the bridge that is considered the designated bridge for this port's segment. See dot1dStpPortDesignatedBridge. |
| OCT expressGSBridgePortDesignatedPort | 1.3.6.1.4.1.343.6.13.5.1.3.1.1.9 | OCTET STRING | read-only | The port identifier of the port on the Designated Bridge for this port's segment. See dot1dStpPortDesignatedPort. |
| CTR expressGSBridgePortForwardTransitions | 1.3.6.1.4.1.343.6.13.5.1.3.1.1.10 | Counter | read-only | The number of times this port has transitioned from the learning state to the forwarding state. See dot1dStpPortForwardTransitions. |
| INT expressGSBridgePortFastStart | 1.3.6.1.4.1.343.6.13.5.1.3.1.1.11 | INTEGER | read-write | This object is being replaced by the switch port object expressGSSwitchPortFastStart. When this bridge port object is set to enable(1), the bridge port and all other bridge ports on the same switch port, transition right from blocking to forwarding, skipping the listening and learning states. When this bridge port object is set to disable(2), the bridge port and all other bridge ports on the same switch port have this option disabled. The user should be warned that using the fast start feature greatly increases the likelihood of unintended network loops that would otherwise be prevented by participating in the normal spanning tree algorithm. The factory default value for this object is disable(2). |
| INT expressGSBridgePortSetDefault | 1.3.6.1.4.1.343.6.13.5.1.3.1.1.12 | INTEGER | read-write | When set to setDefault(2), the expressGSBridgePortPriority, expressGSBridgePortEnable, and expressGSBridgePortPathCost will be set to the factory default values. |
| INT expressGSBridgePortEnableChangeDetection | 1.3.6.1.4.1.343.6.13.5.1.3.1.1.13 | INTEGER | read-write | When this object is set to enable(1), a Topology Change Notification will be generated when this port goes to Blocking or Forwarding (if the port is a designated port). When set to disable(2), no Topology Change Notification will be generated for this port. The default is enable(1). |
| expressGSL2AddrMgmt | 1.3.6.1.4.1.343.6.13.5.1.4 | |||
| expressGSL2AddrDatabaseMgt | 1.3.6.1.4.1.343.6.13.5.1.4.1 | |||
| expressGSL2AddressTable | 1.3.6.1.4.1.343.6.13.5.1.4.1.1 | not-accessible | A table of address table entries. The address table is used by the bridging function to perform forwarding and filtering decisions. An address may appear multiple times in different entries corresponding to the different logical address tables. | |
| expressGSL2AddressEntry | 1.3.6.1.4.1.343.6.13.5.1.4.1.1.1 | not-accessible | A particular address table entry. | |
| INT expressGSL2AddressIndex | 1.3.6.1.4.1.343.6.13.5.1.4.1.1.1.1 | INTEGER | read-only | An index that uniquely identifies this address entry. |
| INT expressGSL2AddressTableIndex | 1.3.6.1.4.1.343.6.13.5.1.4.1.1.1.2 | INTEGER | read-only | The address table that this entry is associated with. |
| MAC expressGSL2AddressMacAddress | 1.3.6.1.4.1.343.6.13.5.1.4.1.1.1.3 | MacAddress | read-only | The IEEE 802 MAC Address associated with this database entry. |
| RES expressGSL2AddressPortBinding | 1.3.6.1.4.1.343.6.13.5.1.4.1.1.1.4 | ResourceId | read-write | The switch port that this address is associated with. |
| INT expressGSL2AddressBindingValid | 1.3.6.1.4.1.343.6.13.5.1.4.1.1.1.5 | INTEGER | read-only | The port binding of an address entry is aged out in conformance with the specifications laid out in the IEEE 802.1D standard. When the address is aged out, the port binding becomes invalid. |
| INT expressGSL2AddressVlanID | 1.3.6.1.4.1.343.6.13.5.1.4.1.1.1.6 | INTEGER | read-only | The VLAN ID of the VLAN that this address entry corresponds to. |
| INT expressGSL2AddressPriority | 1.3.6.1.4.1.343.6.13.5.1.4.1.1.1.7 | INTEGER | read-write | If set to high(2), frames destined to this address are classified with priority value 4. |
| INT expressGSL2AddressForward | 1.3.6.1.4.1.343.6.13.5.1.4.1.1.1.8 | INTEGER | read-only | When set to specialDelivery(2), frames sent to this address are treated to special delivery where the spanning tree state of the inbound port is ignored. Typically, special delivery is only used for Bridge PDUs such as spanning tree frames. |
| INT expressGSL2AddressCopy | 1.3.6.1.4.1.343.6.13.5.1.4.1.1.1.9 | INTEGER | read-only | It is sometimes useful for the switch processor to eavesdrop on traffic to certain destinations. This is especially useful in supporting the intelligent multicasting function. |
| INT expressGSL2AddressPersistence | 1.3.6.1.4.1.343.6.13.5.1.4.1.1.1.10 | INTEGER | read-write | This object indicates the persistence of this entry: other(1) - This entry is currently in use but the conditions under which it will remain so are different from each of the following values. invalid(2) - Writing this value to the object removes the corresponding entry. permanent(3) - Address is not aged out. Additionally, if the address is seen as a source on a different port for this VLAN, the frame is filtered and the filter event is counted. Static address entries are stored in non-volatile memory and are restored to the address table following each system reset. deleteOnReset(4) - Indicates that the entry is not aged out, however the entry is not stored in non-volatile memory. Therefore, when the device is reset, the entry will not be restored. deleteOnTimeout(5) - Typically, address entries are learned dynamically by the switch. These entries are aged out of the table if they are not active on the network. This value correlates to this state. |
| INT expressGSL2AddressStatus | 1.3.6.1.4.1.343.6.13.5.1.4.1.1.1.11 | INTEGER | read-only | This object indicates the status of the entry: other(1) - None of the following. learned(2) - This entry was learned dynamically. self(3) - The value of the corresponding instance of expressGSAddressMacAddress represents one of the bridge's addresses. mgmt(4) - This entry was added or modified by management. Entries that have been added by management and made permanent |
| expressGSL2AddrSummaryMgt | 1.3.6.1.4.1.343.6.13.5.1.4.2 | |||
| expressGSL2AddrSummaryTable | 1.3.6.1.4.1.343.6.13.5.1.4.2.1 | not-accessible | This summary table packs the address entries in the address database into summary objects. The goal is to optimize the upload of the large amount of data stored therein. Typically, a management station would use getNext requests to retrieve the next logical summary object. The returned object value contains the next n entries of the address database packed into one PDU. The instance of the object returned is the index of the last address entry packed in the summary, thereby optimizing for the next getNext request. [ Fix this? What about gets?] | |
| expressGSL2AddrSummaryEntry | 1.3.6.1.4.1.343.6.13.5.1.4.2.1.1 | not-accessible | A summary object that packs as many address entries possible into a summary object. | |
| OCT expressGSL2AddrSummary | 1.3.6.1.4.1.343.6.13.5.1.4.2.1.1.1 | OCTET STRING | read-only | The value of this object is a packed opaque structure representing an array of address entries. The format of this structure is: struct L2AddressEntry { UNS32 index; UNS8 addr[6]; // mac address UNS8 fabricPort; //fabricPort and subPort == expressGSL2AddressPortBinding UNS8 subPort; UNS16 vlanID, //the global vlan id UNS8 portBindingValidFlag; UNS8 addressForwardFlag; UNS8 addressCopyFlag; UNS8 addressPersistence; UNS8 addressStatus; }; struct L2AddressSummary{ UNS8 numberOfEntries; // Number of entries that follow UNS8 version; // version == 1 UNS16 endianFlag; L2AddressEntry entryArray[numberOfEntries]; }; |
| expressGSL2AddrControlMgt | 1.3.6.1.4.1.343.6.13.5.1.4.3 | |||
| expressGSL2AddressControlTable | 1.3.6.1.4.1.343.6.13.5.1.4.3.1 | not-accessible | This table provides the network manager the ability to create new, static address entries. Entries added through this table are added to the specified address table as a static entry and are save in non-volatile memory for reconfiguration upon system restart. This table is indexed by the expressGSAgentMgrIndex value which provides a separate instance for each manager. | |
| expressGSL2AddressControlEntry | 1.3.6.1.4.1.343.6.13.5.1.4.3.1.1 | not-accessible | A control entry enables this manager to add a new entry to the specified address table. When the entry is written to, the control index value is reset to 0. When the actual entry is created, the index value will read as non-zero, reporting the actual entry created. | |
| INT expressGSL2AddressControlIndex | 1.3.6.1.4.1.343.6.13.5.1.4.3.1.1.1 | INTEGER | read-only | The index of the address entry that was created for this address. |
| MAC expressGSL2AddressControlMacAddress | 1.3.6.1.4.1.343.6.13.5.1.4.3.1.1.2 | MacAddress | read-write | The IEEE 802 MAC Address associated with this database entry. |
| RES expressGSL2AddressControlPortBinding | 1.3.6.1.4.1.343.6.13.5.1.4.3.1.1.3 | ResourceId | read-write | The port to bind this address to. |
| INT expressGSL2AddressControlVlanID | 1.3.6.1.4.1.343.6.13.5.1.4.3.1.1.4 | INTEGER | read-write | The VLAN ID of the VLAN to bind this address to. |
| INT expressGSL2AddressControlPriority | 1.3.6.1.4.1.343.6.13.5.1.4.3.1.1.5 | INTEGER | read-write | If set to high(2), frames destined to this address are classified with priority value 4. |
| INT expressGSL2AddressControlPersistence | 1.3.6.1.4.1.343.6.13.5.1.4.3.1.1.6 | INTEGER | read-write | The persistence of the entry to be created: permanent(1) - Address is not aged out. Additionally, if the address is seen as a source on a different port for this VLAN, the frame is filtered and the filter event is counted. Static address entries are stored in non-volatile memory and are restored to the address table following each system reset. deleteOnReset(2) - Indicates that the entry is not to be aged, however the entry is not stored in non-volatile memory. Therefore, when the device is reset, the entry will not be restored. deleteOnTimeout(3) - Indicates that the entry is to be aged by the normal aging process. |
| INT expressGSL2AddressControlStatus | 1.3.6.1.4.1.343.6.13.5.1.4.3.1.1.7 | INTEGER | read-write | The status of an entry to be created. When adding an entry all fields will be set, and then the control status is set to createRequest(1), indicating that the entry is to be created. During creation, the status will be underCreation(2). If the creation is successful, then the status will be set to success(3), and the value of expressGSAddressControlIndex indicates the index of the entry that was created in the address table. Otherwise if the creation was not successful, then one of the following error codes will be set and the entry will not be created: otherError(4) - An error other then the others defined. entryExistsError(5) - An entry already exists with this MAC address in this address table. invalidMacAddress(6) - Cannot create an entry with this MAC address. invalidTableIndex(7) - The table does not exist. invalidPortBinding(8) - The port binding is invalid. invalidVlanID(9) - The VLAN ID is invalid. Note that the only value that is valid to write to this object is createRequest(1), and that this object will never return the value createRequest(1). |
| expressGSL2AddrChangeMgt | 1.3.6.1.4.1.343.6.13.5.1.4.4 | |||
| INT expressGSL2AddressChangeLast | 1.3.6.1.4.1.343.6.13.5.1.4.4.1 | INTEGER | read-only | The index of the last entry written to the address change table |
| CTR expressGSL2AddressChangeWraps | 1.3.6.1.4.1.343.6.13.5.1.4.4.2 | Counter | read-only | The count of the number of times the address change table has wrapped. |
| INT expressGSL2AddressChangeMaxEntries | 1.3.6.1.4.1.343.6.13.5.1.4.4.3 | INTEGER | read-write | The maximum number of entries in the address change table. |
| expressGSL2AddressChangeTable | 1.3.6.1.4.1.343.6.13.5.1.4.4.4 | not-accessible | . | |
| expressGSL2AddressChangeEntry | 1.3.6.1.4.1.343.6.13.5.1.4.4.4.1 | not-accessible | The address change table provides a quick way of getting only the entries that have recently changed. Since entries age out as part of the normal switching process, entries that have aged (i.e. their destination bindings are no longer valid) are not considered to be changed. Any other modification to the entry, including deletion or creation, are considered to be changes. The address change table is considered a circular table. When an entry changes, it is added to the next position within the table. If the 'next' position goes beyond the end of the table, the 'next' position is set to the beginning of the table (1) and the wrap counter (expressGSAddressChangeWraps) is incremented. The expressGSAddressChangeLast value is updated with the index of the last entered entry. An entry may be in the table multiple times if it has changed multiple times. Every time that an entry changes, it is added to the change table. A network management application should follow the following algorithm when polling this table: 1. Set lastChangeWrap = expressGSAddressChangeWraps. 2. Set lastChangeIndex = expressGSAddressChangeLast 3. Get the entire expressGSAddressEntryTable. 4. Submit a getNext for ., updating lastChangeWrap and lastChangeIndex with the returned next values. Update the address entry database with the changed values. 5. Repeat step 4 until no more entries are returned. 6. Wait polling timeout period. 7. Get wrap events counter and last index. If the wrap events counter is equal to lastChangeWrap, then goto step 4. Else if the wrap events counter is more then one greater then lastChangeWrap, goto step 1. Else the wrap events counter is exactly one greater then lastChangeWrap, and if the last index is greater then lastChangeIndex, then goto step 1, else goto step 4. The last step simply insures that we have not missed any of the change entries. Essentially it says that if we have wrapped to beyond where we last polled, then we must get the entire table to synch up again. Otherwise we can just get the entries that have changed. | |
| INT expressGSL2AddressChangeWrapCount | 1.3.6.1.4.1.343.6.13.5.1.4.4.4.1.1 | INTEGER | read-only | The number of times that the expressGSAddressChangeLastIndex had wrapped when this entry was added. |
| INT expressGSL2AddressChangeIndex | 1.3.6.1.4.1.343.6.13.5.1.4.4.4.1.2 | INTEGER | read-only | The index that uniquely identifies this address change entry. |
| INT expressGSL2AddressChangeIndexChanged | 1.3.6.1.4.1.343.6.13.5.1.4.4.4.1.3 | INTEGER | read-only | The address entry that changed. The value of this object corresponds to the expressGSL2AddressIndex object. |
| OCT expressGSL2AddressChangeSummary | 1.3.6.1.4.1.343.6.13.5.1.4.4.4.1.4 | OCTET STRING | read-only | The structure is interpreted in the following manner: |
| expressGSSwitchPortMgt | 1.3.6.1.4.1.343.6.13.5.2 | |||
| expressGSSwitchPortTable | 1.3.6.1.4.1.343.6.13.5.2.1 | not-accessible | ||
| expressGSSwitchPortEntry | 1.3.6.1.4.1.343.6.13.5.2.1.1 | not-accessible | ||
| RES expressGSSwitchPortIndex | 1.3.6.1.4.1.343.6.13.5.2.1.1.1 | ResourceId | read-only | A unique index that identifies this switch port. The value of this index corresponds to the value of the expressGSResourceIndex for switch ports. |
| INT expressGSSwitchPortSTAPMode | 1.3.6.1.4.1.343.6.13.5.2.1.1.2 | INTEGER | read-write | Disabling spanning tree on a switch port prevents the switch port from participating in the spanning tree process. When disabled(2), this port will neither generate BPDUs, nor process received BPDUs. Also, the port will always start in the forwarding state. A port configured in this mode will not be able to detect network loops involving this port. The factory default is to enable spanning tree on all ports. |
| INT expressGSSwitchPortConvertToStatic | 1.3.6.1.4.1.343.6.13.5.2.1.1.3 | INTEGER | read-write | When this object is set to convertToStatic(2), all addresses learned on this port will be added to the non-volatile version of the static address table. Typically, this object will be used to perform a crude form of address database update where the address activity associated with this port is collected as static (i.e. permanent) addresses while the value of this object is set to convertToStatic(2). Following this usually short period of time (perhaps a week of activity), the value of this object is restored back to its default value of learnAsDynamic(1) and learning for this port is disabled. It is important that the user verify the address database to verify that only the desired addresses were made permanent. |
| INT expressGSSwitchPortLearningMode | 1.3.6.1.4.1.343.6.13.5.2.1.1.4 | INTEGER | read-write | Disable learning on a bridge port to prevent new addresses from being added to the address database. Used in combination with static (permanent) address entries, disabling address learning is an effective security feature to prevent new hosts from appearing on the network, or to prevent hosts from moving to different locations in the network. The default is enable. |
| INT expressGSSwitchPortHuntGroup | 1.3.6.1.4.1.343.6.13.5.2.1.1.5 | INTEGER | read-write | Hunt groups provide the capability to logically bind multiple switch ports into one switch port. This provides a way of balancing the load of multiple links between like-configured switches. Care must be taken to configure the hunt groups properly to prevent accidental network looping. Use this object to bind this port to a specific hunt group. When not configured to a specific hunt group, set the value of this object to zero. |
| RES expressGSSwitchPortPhysicalPort | 1.3.6.1.4.1.343.6.13.5.2.1.1.6 | ResourceId | read-only | The physical port resource bound to this switch port. |
| INT expressGSSwitchPortKnownMode | 1.3.6.1.4.1.343.6.13.5.2.1.1.7 | INTEGER | read-write | Enabling known mode for this switch port causes the port to safely discard frames flooded because they are unknown unicast frames. This mode greatly enhances the efficiency of the port's output buffer since space is not wasted for frames not meant for this port. Enabling this feature disables learning for this port. Addresses associated for this port should be entered statically. The default is disable. |
| INT expressGSSwitchPortMappingMethod | 1.3.6.1.4.1.343.6.13.5.2.1.1.8 | INTEGER | read-write | The frame mapping method of this switch port. When set to port-based(1) (the factory default), all non-tagged frames are classified to the VLAN associated with this switch port. |
| INT expressGSSwitchPortTrunkingMode | 1.3.6.1.4.1.343.6.13.5.2.1.1.9 | INTEGER | read-write | The trunking mode of this port. All frames transmitted out this switch port are translated to the appropriate trunking format: Clear: Ethernet or IEEE 802.3 frame format. This is the default. IEEE 802.1Q: The original frame with a new Ethernet Type (Protocol = 0xXXXX) and the VLAN ID inserted following the original Source Address. Also, the CRC is recalculated. Multi-level: The original frame is encapsulated in an IEEE 802.3 legal frame proprietary to a major networking equipment vendor. 3Com LinkSwitch: The original frame has the VLAN ID added to the front of the frame (before the Destination Address). Trunking format is proprietary to 3Com Corporation. |
| INT expressGSSwitchPortVlanBindingMethod | 1.3.6.1.4.1.343.6.13.5.2.1.1.10 | INTEGER | read-write | The VLAN binding method of a switch port specifies the way in which the port can be a member of the egress lists of VLANs other than the port default VLAN specified by expressGSSwitchPortVlanID: static: A Virtual Switch Port must be statically created for each VLAN/port combination. persistent: A Virtual Switch Port is automatically created for each VLAN known to the switch (i.e., the port is a member of the egress lists of all VLANs). dynamic: A Virtual Switch Port is automatically created for each VLAN when the associated VLAN ID is used as a tag in an IEEE 802.1Q or Multi-level tagged frame received on the port (i.e., the port is a member of the egress lists of the VLANs from frames received on the port). The default is static. |
| INT expressGSSwitchPortIgnoreTag | 1.3.6.1.4.1.343.6.13.5.2.1.1.11 | INTEGER | read-write | Each switch port is capable of ignoring the VLAN Tag associated with a frame in a trunking format. When ignored, the tag is used as the default in the event that a VLAN classification based on the switch's policy(s) cannot be made. This feature is useful for connecting layer 2 VLANs and layer 3 VLANs. The default is useTag. |
| INT expressGSSwitchPortVlanID | 1.3.6.1.4.1.343.6.13.5.2.1.1.12 | INTEGER | read-write | When this switch port is configured in port-based VLAN mode, all non-tagged frames received on this port are bound to this VLAN. Otherwise, non-tagged frames are classified to this VLAN as the default if a VLAN binding cannot be otherwise determined. The factory default is 1, which is the VLAN ID of the Default VLAN. |
| INT expressGSSwitchPort3ComMappingTableIndex | 1.3.6.1.4.1.343.6.13.5.2.1.1.13 | INTEGER | read-write | The 3Com VLAN mapping table associated with this switch port. The default is 1, which indicates the default mapping table. |
| INT expressGSSwitchPortAutoVlanCreation | 1.3.6.1.4.1.343.6.13.5.2.1.1.14 | INTEGER | read-write | Enabling auto VLAN creation for this switch port causes the port to dynamically create a VLAN whenever an IEEE 802.1Q or Multi-level tagged frame is received on the port with a tag value which does not correspond to a known VLAN. All switch ports with a trunking mode of IEEE 802.1Q or Multi-level are bound to this created VLAN. The default is disable. |
| INT expressGSSwitchPortMirrorMode | 1.3.6.1.4.1.343.6.13.5.2.1.1.15 | INTEGER | read-only | When set to enable(1), this object indicates that the port is defined as a mirror port through the expressGSPortMirroringTable. A mirror port duplicates frames received at one or more source ports. |
| INT expressGSSwitchPortIfIndex | 1.3.6.1.4.1.343.6.13.5.2.1.1.16 | INTEGER | read-only | Each switch port is associated with an interface. This object provides a mechanism to map switch ports to bridge ports. |
| INT expressGSSwitchPortFastStart | 1.3.6.1.4.1.343.6.13.5.2.1.1.17 | INTEGER | read-write | When this object is set to enable(1), bridge ports on this switch port transitions right from blocking to forwarding, skipping the listening and learning states. The user should be warned that using the fast start feature greatly increases the likelihood of unintended network loops that would otherwise be prevented by participating in the normal spanning tree algorithm. The factory default value for this object is disable(2). |
| expressGSHuntGroupMgt | 1.3.6.1.4.1.343.6.13.5.4 | |||
| expressGSHuntGroupTable | 1.3.6.1.4.1.343.6.13.5.4.1 | not-accessible | ||
| expressGSHuntGroupEntry | 1.3.6.1.4.1.343.6.13.5.4.1.1 | not-accessible | ||
| INT expressGSHuntGroupIndex | 1.3.6.1.4.1.343.6.13.5.4.1.1.1 | INTEGER | read-only | An index that uniquely identifies this hunt group. This index corresponds to the value of expressGSResourceIndex for resources of the hunt group type. |
| STR expressGSHuntGroupName | 1.3.6.1.4.1.343.6.13.5.4.1.1.2 | DisplayString | read-write | |
| RES expressGSHuntGroupBasePort | 1.3.6.1.4.1.343.6.13.5.4.1.1.3 | ResourceId | read-only | The switch port index that serves as the base port for this hunt group. Each hunt group requires a base port. In lieu of a specific configuration, the hunt group will inherit the first switch port bound to the hunt group as its base port. The base port serves as the management focus for the hunt group. That is, a hunt group is managed as one switch port whose instance is provided by the base switch port. All configuration (e.g. spanning tree information) and statistics related to switch ports are meaningful only through the instance of the base port. |
| INT expressGSHuntGroupNumberOfPorts | 1.3.6.1.4.1.343.6.13.5.4.1.1.4 | INTEGER | read-only | The current number of ports that belong to this hunt group. |
| INT expressGSHuntGroupLoadSharing | 1.3.6.1.4.1.343.6.13.5.4.1.1.5 | INTEGER | read-write | |
| INT expressGSHuntGroupStatus | 1.3.6.1.4.1.343.6.13.5.4.1.1.6 | INTEGER | read-write | |
| expressGSPortMirroringMgt | 1.3.6.1.4.1.343.6.13.5.5 | |||
| expressGSPortMirroringTable | 1.3.6.1.4.1.343.6.13.5.5.1 | not-accessible | A table of port mirroring entries used to mirror traffic from a source port to a mirror port. | |
| expressGSPortMirroringEntry | 1.3.6.1.4.1.343.6.13.5.5.1.1 | not-accessible | Objects related to the PortMirroring functionality. | |
| RES expressGSPortMirroringIndex | 1.3.6.1.4.1.343.6.13.5.5.1.1.1 | ResourceId | read-only | The unique index that identifies this entry. This index consists of a switch fabric port and the index of a Packet Lookup Engine servicing this fabric port. |
| INT expressGSPortMirroringSourceSubPort | 1.3.6.1.4.1.343.6.13.5.5.1.1.2 | INTEGER | read-write | The frame sampler source switch subport. The source port is the port from which received traffic will be mirrored. This object identifies the switch subport only, the switch fabric port is identified in expressGSPortMirroringIndex. If set to 0, all subports associated with the expressGSPortMirroringIndex will be source ports. The default value is 0. |
| INT expressGSPortMirroringSamplerType | 1.3.6.1.4.1.343.6.13.5.5.1.1.3 | INTEGER | read-write | The type for this frame sampler. When set to enable(1), every frame received on the source port(s) will be mirrored at the mirror port. When set to disable(2), no frames received on the source port(s) will be mirrored at the mirror port. When set to periodic(3), frames will be mirrored at the rate defined in expressGSPortMirroringRate. The default value is disable(2). |
| INT expressGSPortMirroringRate | 1.3.6.1.4.1.343.6.13.5.5.1.1.4 | INTEGER | read-write | Used in conjunction with expressGSPortMirroringSamplerType to implement periodic sampling functionality. If expressGSPortMirroringSamplerType is set to periodic(3), this object defines the number of packets/second that will be mirrored. If expressGSPortMirroringSamplerType is not periodic(3), this object will set to 0. |
| RES expressGSPortMirroringMirrorPort | 1.3.6.1.4.1.343.6.13.5.5.1.1.5 | ResourceId | read-write | The Switch Port on which frames received at source ports(s) will be duplicated. If no mirror port has been defined this object will return NULL. |
| expressGSVlanMgt | 1.3.6.1.4.1.343.6.13.7 | |||
| expressGSVlans | 1.3.6.1.4.1.343.6.13.7.1 | |||
| expressGSVlanTable | 1.3.6.1.4.1.343.6.13.7.1.1 | not-accessible | ||
| expressGSVlanEntry | 1.3.6.1.4.1.343.6.13.7.1.1.1 | not-accessible | ||
| INT expressGSVlanID | 1.3.6.1.4.1.343.6.13.7.1.1.1.1 | INTEGER | read-only | An identifier that is unique within the administrative domain. This ID is assigned by the management application and is meaningful within that context. This ID is used to identify VLANs when tagged using either the IEEE 802.1 frame format or the Multi-level frame format. |
| STR expressGSVlanName | 1.3.6.1.4.1.343.6.13.7.1.1.1.2 | DisplayString | read-write | A user-assignable name for this Vlan. |
| INT expressGSVlanIfIndex | 1.3.6.1.4.1.343.6.13.7.1.1.1.3 | INTEGER | read-only | Each virtual LAN has a virtual interface associated with it. This enables RMON monitoring to occur per-VLAN. It also provides a handy mechanism to map virtual LANs to bridge ports by mapping them with the ifStack table from the Interface MIB. |
| INT expressGSVlanAFTIndex | 1.3.6.1.4.1.343.6.13.7.1.1.1.4 | INTEGER | read-write | The address table used for this VLAN for explicitly tagged frames (frames received in a trunking frame format or from a port in port-based VLAN mode.) Normally, each VLAN maps to a unique address table. This is useful for environments with duplicate host addresses appear on different VLANs on different ports. For those environments where duplicate hosts on different VLANs don't exist, or exist but are on the same port, and where the address table size and/or aging is a concern, then multiple VLANs may be mapped to the same address table. |
| RES expressGSVlanBridgeIndex | 1.3.6.1.4.1.343.6.13.7.1.1.1.5 | ResourceId | read-write | The bridge resource which is bound to this Vlan. |
| INT expressGSVlanStatus | 1.3.6.1.4.1.343.6.13.7.1.1.1.6 | INTEGER | read-write | The status of an entry to be created or deleted. When adding an entry all fields will be set, and then the status is set to createRequest(1) (indicating that the entry is to be created). When deleting an entry the status is set to destroyRequest(3) (indicating that the entry is to be destroyed). During creation the status will be underCreation(2). If the creation is successful, then the status will be set to active(5). Otherwise if the creation was not successful then one of the following error codes will be set and the entry will not be created: otherError(6) - An error other than the others defined. entryExistsError(7) - An entry already exists. invalidVlanID(8) - the VLAN ID is invalid. invalidVlanName(9) - the VLAN name is invalid. invalidVlanAFTIndex(10) - the VLAN AFT index is invalid. invalidVlanBridgeIndex(11) - the VLAN bridge index is invalid. invalidVlanInitialHashTableSize(12) - the VLAN initial hash table size is invalid. invalidVlanAutoIncrementHTSize(13) - the VLAN auto increment hash table size is invalid. |
| INT expressGSVlanInitialHashTableSize | 1.3.6.1.4.1.343.6.13.7.1.1.1.7 | INTEGER | read-write | The initial hash table size used for MAC addresses on this VLAN. This attribute may only be set when expressGSVlanStatus is set to createRequest(1). It must be a power of 2 between 16 and 8192, inclusive. |
| INT expressGSVlanAutoIncrementHTSize | 1.3.6.1.4.1.343.6.13.7.1.1.1.8 | INTEGER | read-write | This attribute specifies whether or not the hash table size used for MAC addresses on this VLAN is automatically increased as necessary to hold more MAC addresses. This attribute may only be set when expressGSVlanStatus is set to createRequest(1). |
| expressGSVlanMappings | 1.3.6.1.4.1.343.6.13.7.3 | |||
| expressGS3ComMapping | 1.3.6.1.4.1.343.6.13.7.3.1 | |||
| expressGS3ComMappingTable | 1.3.6.1.4.1.343.6.13.7.3.1.1 | not-accessible | ||
| expressGS3ComMappingEntry | 1.3.6.1.4.1.343.6.13.7.3.1.1.1 | not-accessible | ||
| INT expressGS3ComMappingTableIndex | 1.3.6.1.4.1.343.6.13.7.3.1.1.1.1 | INTEGER | read-only | |
| STR expressGS3ComMappingTableName | 1.3.6.1.4.1.343.6.13.7.3.1.1.1.2 | DisplayString | read-write | A user-readable name associated with this table. |
| INT expressGS3ComMappingTableStatus | 1.3.6.1.4.1.343.6.13.7.3.1.1.1.3 | INTEGER | read-write | The status of an entry to be created. When adding an entry all fields will be set, and then the status is set to createRequest(1), indicating that the entry is to be created. If the creation is successful, then the status will be set to active(3). Otherwise if the creation was not successful then one of the following error codes will be set and the entry will not be created: entryExistsError(4) - An entry already exists. otherError(5) - An error other than the others defined. |
| expressGSVlan3ComMapping | 1.3.6.1.4.1.343.6.13.7.3.2 | |||
| expressGSVlan3ComMappingTable | 1.3.6.1.4.1.343.6.13.7.3.2.1 | not-accessible | ||
| expressGSVlan3ComMappingEntry | 1.3.6.1.4.1.343.6.13.7.3.2.1.1 | not-accessible | ||
| INT expressGSVlan3ComMappingIndex | 1.3.6.1.4.1.343.6.13.7.3.2.1.1.1 | INTEGER | read-only | The external tag of this 3Com VLAN. |
| INT expressGSVlan3ComMappingVlanID | 1.3.6.1.4.1.343.6.13.7.3.2.1.1.2 | INTEGER | read-write | The VLAN ID of the VLAN that this 3Com tag is associated with. |
| INT expressGSVlan3ComMappingStatus | 1.3.6.1.4.1.343.6.13.7.3.2.1.1.3 | INTEGER | read-write | The status of an entry to be created. When adding an entry all fields will be set, and then the status is set to createRequest(1), indicating that the entry is to be created. If the creation is successful, then the status will be set to active(3). Otherwise if the creation was not successful then one of the following error codes will be set and the entry will not be created: otherError(4) - An error other than the others defined. |
| expressGSVirtualPorts | 1.3.6.1.4.1.343.6.13.7.4 | |||
| expressGSVirtualSwitchPortTable | 1.3.6.1.4.1.343.6.13.7.4.1 | not-accessible | ||
| expressGSVirtualSwitchPortEntry | 1.3.6.1.4.1.343.6.13.7.4.1.1 | not-accessible | An instance of a virtual switch port indicates that this switch port is a member of this VLAN. | |
| RES expressGSVirtualSwitchPortIndex | 1.3.6.1.4.1.343.6.13.7.4.1.1.1 | ResourceId | read-only | The Resource ID of the virtual switch port bound to the VLAN. |
| INT expressGSVirtualSwitchPortFormat | 1.3.6.1.4.1.343.6.13.7.4.1.1.2 | INTEGER | read-write | Typically, a VLAN capable switch port has one of three modes: access, trunk, or hybrid. In access mode, the port sends frames in clear format (untagged). In trunk mode, all outbound frames are translated into the switch port's configured trunking format. In hybrid mode, it is possible for a port to send trunked frames for some VLANs and clear frames for others. In this case, the switch port is configured to trunk, and the virtual switch port(s) for those VLANs that require clear formatted frames are configured to be override the switch port setting. This is done by setting this object to clear(1). By default, the value of this object is trunkingFormat(2) which means to use the trunking format configured for this switch port. (which may be clear). |
| RES expressGSVirtualSwitchPortBridgePort | 1.3.6.1.4.1.343.6.13.7.4.1.1.3 | ResourceId | read-write | The bridge port resource bound to this virtual port. |
| INT expressGSVirtualSwitchPortBindingType | 1.3.6.1.4.1.343.6.13.7.4.1.1.4 | INTEGER | read-only | The method by which this switch port was bound to the VLAN. If the value is static(1), the binding was manually created by the administrator. If the value is persistent(2), the binding was created by the switch because the VLAN is the port-based VLAN for the switch port, or the switch port VLAN Binding Method is persistent. These bindings may not be removed. If the value is dynamic(3), the binding was created by the switch as a result of receiving a tagged frame on the switch port with a VLAN ID corresponding to the VLAN. |
| INT expressGSVirtualSwitchPortStatus | 1.3.6.1.4.1.343.6.13.7.4.1.1.5 | INTEGER | read-write | The status of an entry to be created or deleted. When adding an entry all fields will be set, and then the status is set to createRequest(1) (indicating that the entry is to be created). When deleting an entry the status is set to destroyRequest(2) (indicating that the entry is to be destroyed). If the creation is successful, then the status will be set to active(3). Otherwise if the creation was not successful then one of the following error codes will be set and the entry will not be created: otherError(4) - An error other than the others defined. entryExistsError(5) - On creation, an entry already exists. On deletion, the entry may not be removed. entryNoExistError(6) - The VLAN specified by ID does not exist. |
| expressGSEvents | 1.3.6.1.4.1.343.6.13.10 | |||
| expressGSEventMgt | 1.3.6.1.4.1.343.6.13.10.1 | |||
| expressGSEventTable | 1.3.6.1.4.1.343.6.13.10.1.1 | not-accessible | Table of events currently supported. | |
| expressGSEventEntry | 1.3.6.1.4.1.343.6.13.10.1.1.1 | not-accessible | Attributes associated with the event. | |
| INT expressGSEventIndex | 1.3.6.1.4.1.343.6.13.10.1.1.1.1 | INTEGER | read-only | |
| INT expressGSEventMode | 1.3.6.1.4.1.343.6.13.10.1.1.1.2 | INTEGER | read-write | Disabling an event prevents this event from taking any actions when triggered. When set to enable to the console, the event will print the event information to the console serial port. The user can select whether to view log messages, trap messages or any event at the console. |
| INT expressGSEventLogAction | 1.3.6.1.4.1.343.6.13.10.1.1.1.3 | INTEGER | read-write | When enabled, this action will cause an event log entry to be created. |
| INT expressGSEventTrapAction | 1.3.6.1.4.1.343.6.13.10.1.1.1.4 | INTEGER | read-write | When enabled, this event will cause an SNMP trap to be generated. |
| INT expressGSEventConsoleAction | 1.3.6.1.4.1.343.6.13.10.1.1.1.5 | INTEGER | read-write | When enabled, this event will cause a message to printed to the console serial port. |
| expressGSEventLogMgt | 1.3.6.1.4.1.343.6.13.10.2 | |||
| INT expressGSLogTableMaxSize | 1.3.6.1.4.1.343.6.13.10.2.1 | INTEGER | read-write | The maximum number of entries in the log table. Changing this value causes the existing log to be truncated and rebuilt. |
| INT expressGSLogLastEntry | 1.3.6.1.4.1.343.6.13.10.2.2 | INTEGER | read-only | The log index of the last entry entered in the log. |
| CTR expressGSLogWraps | 1.3.6.1.4.1.343.6.13.10.2.3 | Counter | read-only | The number of times that the last entry has wrapped from 65K back to 1. |
| expressGSEventLog | 1.3.6.1.4.1.343.6.13.10.3 | |||
| expressGSEventLogTable | 1.3.6.1.4.1.343.6.13.10.3.1 | not-accessible | The log table for the events in the event table that are enabled for the Log Action. | |
| expressGSEventLogEntry | 1.3.6.1.4.1.343.6.13.10.3.1.1 | not-accessible | An entry in the log indicates information associated with a particular event. | |
| INT expressGSEventLogEventIndex | 1.3.6.1.4.1.343.6.13.10.3.1.1.1 | INTEGER | read-only | The index that uniquely identifies the event that caused this log entry. |
| INT expressGSEventLogIndex | 1.3.6.1.4.1.343.6.13.10.3.1.1.2 | INTEGER | read-only | An index that uniquely identifies this log entry. |
| TIK expressGSEventLogTime | 1.3.6.1.4.1.343.6.13.10.3.1.1.3 | TimeTicks | read-only | The value of sysUpTime when this event was triggered. |
| STR expressGSEventLogDescr | 1.3.6.1.4.1.343.6.13.10.3.1.1.4 | DisplayString | read-only | The event log description. |
| EVE expressGSEventLogType | 1.3.6.1.4.1.343.6.13.10.3.1.1.5 | EventCategory | read-only | The type of event that caused this log entry. |
| INT expressGSEventLogSeverity | 1.3.6.1.4.1.343.6.13.10.3.1.1.6 | INTEGER | read-only | The severity associated with this event. It is recommended that the severity be interpreted in the following manner: 0-19: Normal 20-39: Informational 40-59: Warning 60-79: Alarm 80-99: Severe Error 100: Failure. |
| STR expressGSEventLogDTM | 1.3.6.1.4.1.343.6.13.10.3.1.1.7 | DisplayString | read-only | The date and time when this log entry was made. The format is yy-Mon- dd hh:mm:ss, time is in 24 hour time. |
| RES expressGSEventLogResType | 1.3.6.1.4.1.343.6.13.10.3.1.1.8 | ResourceType | read-only | The type of object (if provided) that triggered this event. If not provided, the value is equal to 'Invalid Resource'. |
| RES expressGSEventLogResID | 1.3.6.1.4.1.343.6.13.10.3.1.1.9 | ResourceId | read-only | The instance of this resource (if provided - see expressGSEventLogResType) that triggered this event. |
| INT expressGSEventLogResLeaf | 1.3.6.1.4.1.343.6.13.10.3.1.1.10 | INTEGER | read-only | A number corresponding to the attribute associated with this resource and this event entry. It corresponds exactly to the leaf MIB number of the MIB that manages this resource. For example, if a port's mode changed, the configuration event log entry would indicate the value of 5 which is the leaf index of the expressGSPortMode within the expressGSPortTable MIB table. |
| EVE expressGSEventLogValueType | 1.3.6.1.4.1.343.6.13.10.3.1.1.11 | EventValueType | read-only | The data type associated with the log event value. This object indicates how to interpret the data stored in the event log value: - none(1) indicates no value returned. - integer32(2) - a 4 byte unsigned integer. - integer64(3) - an 8 byte unsigned integer. - displayString(4) - a null terminated (or up to 8 characters) string. - ipv4NetworkAddress(5) - a 4 byte IP version 4 network address. - ieee802MACAddress(6) - a 6 byte MAC Address. - timeticks(7) - sysUpTime type value (4 bytes) |
| OCT expressGSEventLogValue | 1.3.6.1.4.1.343.6.13.10.3.1.1.12 | OCTET STRING | read-only | The value associated with the event encoded in an octet string. Refer to expressGSEventLogValueType for how to interpret this value. The value encoded in this string is in Big Endian order. |
| INT expressGSEventLogEpochTime | 1.3.6.1.4.1.343.6.13.10.3.1.1.13 | INTEGER | read-only | The number of time ticks since the epoch when this event was logged. The interpretation of this value is as follows: struct DateTimeOvly { UNS32 year:6; UNS32 month:4; UNS32 day:5; UNS32 hour:5; UNS32 minute:6; UNS32 second:6; }; The epoch is January 1, 1997, at 00:00:00. A value of 0 refers to this date and time. |
| INT expressGSEventLogID | 1.3.6.1.4.1.343.6.13.10.3.1.1.14 | INTEGER | read-only | A unique index that identifies the occurence of this event. This ID can be correlated between traps, logs and the like. |
| expressGSShutdownLogMgt | 1.3.6.1.4.1.343.6.13.10.4 | |||
| INT expressGSShutdownLogTableMaxSize | 1.3.6.1.4.1.343.6.13.10.4.1 | INTEGER | read-write | The maximum number of entries in the non-volatile log table. Changing the value of this object changes the maximum number of entries to be stored in Shutdown. |
| INT expressGSShutdownLogLastEntry | 1.3.6.1.4.1.343.6.13.10.4.2 | INTEGER | read-only | The ID of the last entry made to the shutdown log. |
| INT expressGSShutdownLogAcknowledged | 1.3.6.1.4.1.343.6.13.10.4.3 | INTEGER | read-only | This object is to set to acknowledged(2) the first time the Shutdown Log Table is accessed indicating that the Shutdown log has been read (at least once) since the system restarted. |
| expressGSEventShutdownLog | 1.3.6.1.4.1.343.6.13.10.5 | |||
| expressGSEventShutdownLogTable | 1.3.6.1.4.1.343.6.13.10.5.1 | not-accessible | A table of the last events logged before the system restarted. | |
| expressGSEventShutdownLogEntry | 1.3.6.1.4.1.343.6.13.10.5.1.1 | not-accessible | A log entry stored in non-volatile memory. | |
| INT expressGSEventShutdownLogEventIndex | 1.3.6.1.4.1.343.6.13.10.5.1.1.1 | INTEGER | read-only | The index that uniquely identifies the event that caused this ShutdownLog entry. |
| INT expressGSEventShutdownLogIndex | 1.3.6.1.4.1.343.6.13.10.5.1.1.2 | INTEGER | read-only | An index that uniquely identifies this ShutdownLog entry. |
| TIK expressGSEventShutdownLogTime | 1.3.6.1.4.1.343.6.13.10.5.1.1.3 | TimeTicks | read-only | The value of sysUpTime when this event was triggered. Note, the value corresponds to the sysUpTime when the system was last running (i.e. before it was shutdown.) |
| STR expressGSEventShutdownLogDescr | 1.3.6.1.4.1.343.6.13.10.5.1.1.4 | DisplayString | read-only | The event ShutdownLog description. |
| EVE expressGSEventShutdownLogType | 1.3.6.1.4.1.343.6.13.10.5.1.1.5 | EventCategory | read-only | The type of event that caused this ShutdownLog entry. |
| INT expressGSEventShutdownLogSeverity | 1.3.6.1.4.1.343.6.13.10.5.1.1.6 | INTEGER | read-only | The severity associated with this event. It is recommended that the severity be interpreted in the following manner: 0-19: Normal 20-39: Informational 40-59: Warning 60-79: Alarm 80-99: Severe Error 100: Failure. |
| STR expressGSEventShutdownLogDTM | 1.3.6.1.4.1.343.6.13.10.5.1.1.7 | DisplayString | read-only | The date and time when this ShutdownLog entry was made. The format is yy-Mon-dd hh:mm:ss, time is in 24 hour time. |
| RES expressGSEventShutdownLogResType | 1.3.6.1.4.1.343.6.13.10.5.1.1.8 | ResourceType | read-only | The type of object (if provided) that triggered this event. If not provided, the value is invalid. |
| RES expressGSEventShutdownLogResID | 1.3.6.1.4.1.343.6.13.10.5.1.1.9 | ResourceId | read-only | The instance of this resource (if provided) that triggered this event. |
| INT expressGSEventShutdownLogResLeaf | 1.3.6.1.4.1.343.6.13.10.5.1.1.10 | INTEGER | read-only | To be provided. |
| EVE expressGSEventShutdownLogValueType | 1.3.6.1.4.1.343.6.13.10.5.1.1.11 | EventValueType | read-only | The data type associated with the ShutdownLog event value. This object indicates how to interpret the data stored in the event ShutdownLog value. |
| OCT expressGSEventShutdownLogValue | 1.3.6.1.4.1.343.6.13.10.5.1.1.12 | OCTET STRING | read-only | The value associated with the event encoded in an octet string. |
| INT expressGSEventShutdownLogEpochTime | 1.3.6.1.4.1.343.6.13.10.5.1.1.13 | INTEGER | read-only | The number of time ticks since the epoch when this event was logged. The interpretation of this value is as follows: struct DateTimeOvly { UNS32 year:6; UNS32 month:4; UNS32 day:5; UNS32 hour:5; UNS32 minute:6; UNS32 second:6; }; The epoch is January 1, 1997, at 00:00:00. A value of 0 refers to this date and time. |
| INT expressGSEventShutdownLogID | 1.3.6.1.4.1.343.6.13.10.5.1.1.14 | INTEGER | read-only | A unique index that identifies the occurence of this event. This ID can be correlated between traps, logs and the like. |
| expressGSEventTrapMgmt | 1.3.6.1.4.1.343.6.13.10.6 | |||
| INT expressGSEventTrapEventIndex | 1.3.6.1.4.1.343.6.13.10.6.1 | INTEGER | read-only | The index that uniquely identifies the event that caused this trap. |
| TIK expressGSEventTrapTime | 1.3.6.1.4.1.343.6.13.10.6.2 | TimeTicks | read-only | The value of sysUpTime when this event was triggered. |
| STR expressGSEventTrapDescr | 1.3.6.1.4.1.343.6.13.10.6.3 | DisplayString | read-only | The event log description. |
| EVE expressGSEventTrapType | 1.3.6.1.4.1.343.6.13.10.6.4 | EventCategory | read-only | The type of event that caused this trap. |
| INT expressGSEventTrapSeverity | 1.3.6.1.4.1.343.6.13.10.6.5 | INTEGER | read-only | The severity associated with this event. It is recommended that the severity be interpreted in the following manner: 0-19: Normal 20-39: Informational 40-59: Warning 60-79: Alarm 80-99: Severe Error 100: Failure. |
| STR expressGSEventTrapDTM | 1.3.6.1.4.1.343.6.13.10.6.6 | DisplayString | read-only | The date and time when this trap was sent. The format is yy-Mon- dd hh:mm:ss, time is in 24 hour time. |
| RES expressGSEventTrapResType | 1.3.6.1.4.1.343.6.13.10.6.7 | ResourceType | read-only | The type of object (if provided) that triggered this event. If not provided, the value is equal to 'Invalid Resource'. |
| RES expressGSEventTrapResID | 1.3.6.1.4.1.343.6.13.10.6.8 | ResourceId | read-only | The instance of this resource (if provided - see expressGSEventTrapResType) that triggered this event. |
| INT expressGSEventTrapResLeaf | 1.3.6.1.4.1.343.6.13.10.6.9 | INTEGER | read-only | A number corresponding to the attribute associated with this resource and this event entry. It corresponds exactly to the leaf MIB number of the MIB that manages this resource. For example, if a port's mode changed, the configuration event log entry would indicate the value of 5 which is the leaf index of the expressGSPortMode within the expressGSPortTable MIB table. |
| EVE expressGSEventTrapValueType | 1.3.6.1.4.1.343.6.13.10.6.10 | EventValueType | read-only | The data type associated with the trap event value. This object indicates how to interpret the data stored in the event trap value: - none(1) indicates no value returned. - integer32(2) - a 4 byte unsigned integer. - integer64(3) - an 8 byte unsigned integer. - displayString(4) - a null terminated (or up to 8 characters) string. - ipv4NetworkAddress(5) - a 4 byte IP version 4 network address. - ieee802MACAddress(6) - a 6 byte MAC Address. - timeticks(7) - sysUpTime type value (4 bytes) |
| OCT expressGSEventTrapValue | 1.3.6.1.4.1.343.6.13.10.6.11 | OCTET STRING | read-only | The value associated with the event encoded in an octet string. Refer to expressGSEventTrapValueType for how to interpret this value. The value encoded in this string is in Big Endian order. |
| INT expressGSEventTrapEpochTime | 1.3.6.1.4.1.343.6.13.10.6.12 | INTEGER | read-only | The number of time ticks since the epoch when this event was logged. The interpretation of this value is as follows: struct DateTimeOvly { UNS32 year:6; UNS32 month:4; UNS32 day:5; UNS32 hour:5; UNS32 minute:6; UNS32 second:6; }; The epoch is January 1, 1997, at 00:00:00. A value of 0 refers to this date and time. |
| INT expressGSEventTrapID | 1.3.6.1.4.1.343.6.13.10.6.13 | INTEGER | read-only | A unique index that identifies the occurence of this event. This ID can be correlated between traps, logs and the like. |
| expressGSAlarmMgt | 1.3.6.1.4.1.343.6.13.11 | |||
| expressGSAlarmGeneral | 1.3.6.1.4.1.343.6.13.11.1 | |||
| GAU expressGSAlarmGeneralActiveEntries | 1.3.6.1.4.1.343.6.13.11.1.1 | Gauge | read-only | The total number of alarm entries in the triggered state currently in the alarm table. |
| TIK expressGSAlarmGeneralTimeStamp | 1.3.6.1.4.1.343.6.13.11.1.2 | TimeTicks | read-only | The value of sysUpTime when any alarm state last changed (either triggering a new alarm or re-arming an old one). |
| expressGSAlarms | 1.3.6.1.4.1.343.6.13.11.2 | |||
| expressGSActiveAlarmTable | 1.3.6.1.4.1.343.6.13.11.2.2 | not-accessible | A table of all alarms in the triggered state. | |
| expressGSActiveAlarmEntry | 1.3.6.1.4.1.343.6.13.11.2.2.1 | not-accessible | An alarm in the triggered state. | |
| INT expressGSActiveAlarmIndex | 1.3.6.1.4.1.343.6.13.11.2.2.1.1 | INTEGER | read-only | The unique index that identifies this alarm. |
| STR expressGSActiveAlarmName | 1.3.6.1.4.1.343.6.13.11.2.2.1.2 | DisplayString | read-only | The name of this alarm. |
| INT expressGSActiveAlarmValueHigh | 1.3.6.1.4.1.343.6.13.11.2.2.1.3 | INTEGER | read-only | The high order 32 bits of the value that triggered this alarm. |
| INT expressGSActiveAlarmValueLow | 1.3.6.1.4.1.343.6.13.11.2.2.1.4 | INTEGER | read-only | The low order 32 bits of the value that triggered this alarm. |
| OID expressGSActiveAlarmVariable | 1.3.6.1.4.1.343.6.13.11.2.2.1.5 | OBJECT IDENTIFIER | read-only | The OID of the alarm variable if this is a user-created alarm (null otherwise). |
| RES expressGSActiveAlarmResType | 1.3.6.1.4.1.343.6.13.11.2.2.1.6 | ResourceType | read-only | The resource type of this alarm if this is an internally created alarm. |
| RES expressGSActiveAlarmResID | 1.3.6.1.4.1.343.6.13.11.2.2.1.7 | ResourceId | read-only | The resource identifier associated with this alarm if this is an internally created alarm. |
| INT expressGSActiveAlarmLeaf | 1.3.6.1.4.1.343.6.13.11.2.2.1.8 | INTEGER | read-only | The leaf index of the MIB table used to manage this resource that is associated with this alarm, if this is an internally created alarm. For example, if this alarm was created to monitor a port's status, then the value of this object will be 6, corresponding to the leaf index of the expressGSPortStatus object. |
| STR expressGSActiveAlarmOwner | 1.3.6.1.4.1.343.6.13.11.2.2.1.9 | DisplayString | read-only | This is the owner of the alarm. |
| expressGSSnmpTraps | 1.3.6.1.4.1.343.6.13.13 | |||
| NTF expressGSSystemTrap | 1.3.6.1.4.1.343.6.13.13.0.2 | A expressGSSystemTrap is sent by the agent when a system event is triggered. These events are usually triggered when the software encounters an unexpected situation, e.g. a hardware failure or a software bug. | ||
| NTF expressGSConfigurationTrap | 1.3.6.1.4.1.343.6.13.13.0.3 | A expressGSConfigurationTrap is sent by the agent when the configuration event is triggered. These events are triggered when a configuration change is made. | ||
| NTF expressGSTemperatureTrap | 1.3.6.1.4.1.343.6.13.13.0.4 | A expressGSTemperatureTrap is sent by the agent when the temperature event is triggered. This event is triggered when a temperature probe detects the temperature crossing a threshold. | ||
| NTF expressGSResourceTrap | 1.3.6.1.4.1.343.6.13.13.0.5 | A expressGSResourceTrap is sent by the agent when the resource event is triggered. The resource event is triggered when a resource is added or removed from the system. | ||
| NTF expressGSFanTrap | 1.3.6.1.4.1.343.6.13.13.0.6 | A expressGSFanTrap is sent by the agent when the fan status event is triggered. The fan status event is triggered when a fan has a change in its status. | ||
| NTF expressGSPowerTrap | 1.3.6.1.4.1.343.6.13.13.0.9 | A expressGSPowerTrap is sent by the agent when the power event is triggered. These events are triggered when a power supply changes status. |
RFC description
Intel Express Gigabit Switch enterprise-specific management for switching, VLANs, and system resources.
Start monitoring Express Gigabit Switch (Intel-registered enterprise Ethernet switch) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.