EXPRESSGS-MIB :: expressGSSwitchPortTrunkingMode

MIB Reference — IPNetwork Monitor · Updated October 05, 2026

All MIBs › EXPRESSGS-MIB › expressGSSwitchPortTrunkingMode

expressGSSwitchPortTrunkingMode

Module: EXPRESSGS-MIB

OID (symbolic): EXPRESSGS-MIB::expressGSSwitchPortTrunkingMode

OID (numeric): 1.3.6.1.4.1.343.6.13.5.2.1.1.9

Node type: OBJECT-TYPE

Type: INTEGER

Access: read-write

Description: The trunking mode of this port. All frames transmitted out this switch port are translated to the appropriate trunking format:

Clear: Ethernet or IEEE 802.3 frame format. This is the default. IEEE 802.1Q: The original frame with a new Ethernet Type (Protocol = 0xXXXX) and the VLAN ID inserted following the original Source Address. Also, the CRC is recalculated. Multi-level: The original frame is encapsulated in an IEEE 802.3 legal frame proprietary to a major networking equipment vendor. 3Com LinkSwitch: The original frame has the VLAN ID added to the front of the frame (before the Destination Address). Trunking format is proprietary to 3Com Corporation.

What is expressGSSwitchPortTrunkingMode?

Selects the trunking (tagging) format this port uses for outbound frames: clear(1) (untagged, default), ieee8021q(2), multiLevel(3), or trunk3Com(4). An admin sets ieee8021q(2) when trunking VLANs to standards-based equipment, or trunk3Com(4) only when interoperating with legacy 3Com LinkSwitch trunking.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.343.6.13.5.2.1.1.9
snmpwalk -v2c -c public <target> EXPRESSGS-MIB::expressGSSwitchPortTrunkingMode

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.343.6.13.5.2.1.1.9.1
snmpget -v2c -c public <target> EXPRESSGS-MIB::expressGSSwitchPortTrunkingMode.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.343.6.13.5.2.1.1.9.1 i <value>

Start monitoring Express Gigabit Switch (Intel-registered enterprise Ethernet switch) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the EXPRESSGS-MIB::expressGSSwitchPortTrunkingMode OID value, configure state conditions and alerts, and monitor any Express Gigabit Switch (Intel-registered enterprise Ethernet switch) from a single console.

OID Breakdown

Upper-level ancestors (7 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.343intelAOLAN-MIB
Numeric OIDNameModule
1.3.6.1.4.1.343.6mib2extEXPRESSGS-MIB
1.3.6.1.4.1.343.6.13esGigaSwitchEXPRESSGS-MIB
1.3.6.1.4.1.343.6.13.5expressGSSwitchingEXPRESSGS-MIB
1.3.6.1.4.1.343.6.13.5.2expressGSSwitchPortMgtEXPRESSGS-MIB
1.3.6.1.4.1.343.6.13.5.2.1expressGSSwitchPortTableEXPRESSGS-MIB
1.3.6.1.4.1.343.6.13.5.2.1.1expressGSSwitchPortEntryEXPRESSGS-MIB
1.3.6.1.4.1.343.6.13.5.2.1.1.9expressGSSwitchPortTrunkingModeEXPRESSGS-MIB