All MIBs › EXPRESSGS-MIB › expressGSL2AddressPersistence
expressGSL2AddressPersistence
Module: EXPRESSGS-MIB
OID (symbolic): EXPRESSGS-MIB::expressGSL2AddressPersistence
OID (numeric): 1.3.6.1.4.1.343.6.13.5.1.4.1.1.1.10
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: This object indicates the persistence of this entry:
other(1) - This entry is currently in use but the conditions under which it will remain so are different from each of the following values.
invalid(2) - Writing this value to the object removes the corresponding entry.
permanent(3) - Address is not aged out. Additionally, if the address is seen as a source on a different port for this VLAN, the frame is filtered and the filter event is counted. Static address entries are stored in non-volatile memory and are restored to the address table following each system reset.
deleteOnReset(4) - Indicates that the entry is not aged out, however the entry is not stored in non-volatile memory. Therefore, when the device is reset, the entry will not be restored.
deleteOnTimeout(5) - Typically, address entries are learned dynamically by the switch. These entries are aged out of the table if they are not active on the network. This value correlates to this state.
What is expressGSL2AddressPersistence?
Describes how this entry is maintained: other(1) is a catch-all, invalid(2) is written to delete the entry, permanent(3) survives resets and is stored in non-volatile memory, deleteOnReset(4) survives aging but not a reboot, and deleteOnTimeout(5) is a normal dynamically-learned entry subject to aging. An admin sets permanent(3) when statically binding a critical server's MAC to a port so the binding survives a switch reboot.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.343.6.13.5.1.4.1.1.1.10 snmpwalk -v2c -c public <target> EXPRESSGS-MIB::expressGSL2AddressPersistence
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.343.6.13.5.1.4.1.1.1.10.1 snmpget -v2c -c public <target> EXPRESSGS-MIB::expressGSL2AddressPersistence.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.343.6.13.5.1.4.1.1.1.10.1 i <value>
Start monitoring Express Gigabit Switch (Intel-registered enterprise Ethernet switch) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the EXPRESSGS-MIB::expressGSL2AddressPersistence OID value, configure state conditions and alerts, and monitor any Express Gigabit Switch (Intel-registered enterprise Ethernet switch) from a single console.
OID Breakdown
Upper-level ancestors (7 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.343 | intel | AOLAN-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.343.6 | mib2ext | EXPRESSGS-MIB |
| 1.3.6.1.4.1.343.6.13 | esGigaSwitch | EXPRESSGS-MIB |
| 1.3.6.1.4.1.343.6.13.5 | expressGSSwitching | EXPRESSGS-MIB |
| 1.3.6.1.4.1.343.6.13.5.1 | expressGSSwitchingLayerII | EXPRESSGS-MIB |
| 1.3.6.1.4.1.343.6.13.5.1.4 | expressGSL2AddrMgmt | EXPRESSGS-MIB |
| 1.3.6.1.4.1.343.6.13.5.1.4.1 | expressGSL2AddrDatabaseMgt | EXPRESSGS-MIB |
| 1.3.6.1.4.1.343.6.13.5.1.4.1.1 | expressGSL2AddressTable | EXPRESSGS-MIB |
| 1.3.6.1.4.1.343.6.13.5.1.4.1.1.1 | expressGSL2AddressEntry | EXPRESSGS-MIB |
| 1.3.6.1.4.1.343.6.13.5.1.4.1.1.1.10 | expressGSL2AddressPersistence | EXPRESSGS-MIB |