All MIBs › EXPRESSGS-MIB › expressGSSwitchPortConvertToStatic
expressGSSwitchPortConvertToStatic
Module: EXPRESSGS-MIB
OID (symbolic): EXPRESSGS-MIB::expressGSSwitchPortConvertToStatic
OID (numeric): 1.3.6.1.4.1.343.6.13.5.2.1.1.3
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: When this object is set to convertToStatic(2), all addresses learned on this port will be added to the non-volatile version of the static address table.
Typically, this object will be used to perform a crude form of address database update where the address activity associated with this port is collected as static (i.e. permanent) addresses while the value of this object is set to convertToStatic(2). Following this usually short period of time (perhaps a week of activity), the value of this object is restored back to its default value of learnAsDynamic(1) and learning for this port is disabled.
It is important that the user verify the address database to verify that only the desired addresses were made permanent.
What is expressGSSwitchPortConvertToStatic?
Setting convertToStatic(2) causes all addresses subsequently learned on this port to be added as permanent entries in the non-volatile static address table, useful as a crude way to 'snapshot' a port's active hosts as static entries. An admin typically leaves this on for a short window (e.g. a week), then restores learnAsDynamic(1) and disables further learning, verifying the resulting static entries are all legitimate.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.343.6.13.5.2.1.1.3 snmpwalk -v2c -c public <target> EXPRESSGS-MIB::expressGSSwitchPortConvertToStatic
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.343.6.13.5.2.1.1.3.1 snmpget -v2c -c public <target> EXPRESSGS-MIB::expressGSSwitchPortConvertToStatic.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.343.6.13.5.2.1.1.3.1 i <value>
Start monitoring Express Gigabit Switch (Intel-registered enterprise Ethernet switch) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the EXPRESSGS-MIB::expressGSSwitchPortConvertToStatic OID value, configure state conditions and alerts, and monitor any Express Gigabit Switch (Intel-registered enterprise Ethernet switch) from a single console.
OID Breakdown
Upper-level ancestors (7 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.343 | intel | AOLAN-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.343.6 | mib2ext | EXPRESSGS-MIB |
| 1.3.6.1.4.1.343.6.13 | esGigaSwitch | EXPRESSGS-MIB |
| 1.3.6.1.4.1.343.6.13.5 | expressGSSwitching | EXPRESSGS-MIB |
| 1.3.6.1.4.1.343.6.13.5.2 | expressGSSwitchPortMgt | EXPRESSGS-MIB |
| 1.3.6.1.4.1.343.6.13.5.2.1 | expressGSSwitchPortTable | EXPRESSGS-MIB |
| 1.3.6.1.4.1.343.6.13.5.2.1.1 | expressGSSwitchPortEntry | EXPRESSGS-MIB |
| 1.3.6.1.4.1.343.6.13.5.2.1.1.3 | expressGSSwitchPortConvertToStatic | EXPRESSGS-MIB |