All MIBs › EXPRESSGS-MIB › expressGSVirtualSwitchPortStatus
expressGSVirtualSwitchPortStatus
Module: EXPRESSGS-MIB
OID (symbolic): EXPRESSGS-MIB::expressGSVirtualSwitchPortStatus
OID (numeric): 1.3.6.1.4.1.343.6.13.7.4.1.1.5
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: The status of an entry to be created or deleted. When adding an entry all fields will be set, and then the status is set to createRequest(1) (indicating that the entry is to be created). When deleting an entry the status is set to destroyRequest(2) (indicating that the entry is to be destroyed). If the creation is successful, then the status will be set to active(3). Otherwise if the creation was not successful then one of the following error codes will be set and the entry will not be created: otherError(4) - An error other than the others defined. entryExistsError(5) - On creation, an entry already exists. On deletion, the entry may not be removed. entryNoExistError(6) - The VLAN specified by ID does not exist.
What is expressGSVirtualSwitchPortStatus?
Drives creation or deletion of this port's VLAN membership: createRequest(1)/destroyRequest(2), active(3) once successful, or an error such as entryExistsError(5) (create found a duplicate, or delete found a binding that may not be removed) or entryNoExistError(6) (the named VLAN doesn't exist). An admin sets createRequest(1) to statically add a port to an additional VLAN's egress list.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.343.6.13.7.4.1.1.5 snmpwalk -v2c -c public <target> EXPRESSGS-MIB::expressGSVirtualSwitchPortStatus
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.343.6.13.7.4.1.1.5.1 snmpget -v2c -c public <target> EXPRESSGS-MIB::expressGSVirtualSwitchPortStatus.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.343.6.13.7.4.1.1.5.1 i <value>
Start monitoring Express Gigabit Switch (Intel-registered enterprise Ethernet switch) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the EXPRESSGS-MIB::expressGSVirtualSwitchPortStatus OID value, configure state conditions and alerts, and monitor any Express Gigabit Switch (Intel-registered enterprise Ethernet switch) from a single console.
OID Breakdown
Upper-level ancestors (7 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.343 | intel | AOLAN-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.343.6 | mib2ext | EXPRESSGS-MIB |
| 1.3.6.1.4.1.343.6.13 | esGigaSwitch | EXPRESSGS-MIB |
| 1.3.6.1.4.1.343.6.13.7 | expressGSVlanMgt | EXPRESSGS-MIB |
| 1.3.6.1.4.1.343.6.13.7.4 | expressGSVirtualPorts | EXPRESSGS-MIB |
| 1.3.6.1.4.1.343.6.13.7.4.1 | expressGSVirtualSwitchPortTable | EXPRESSGS-MIB |
| 1.3.6.1.4.1.343.6.13.7.4.1.1 | expressGSVirtualSwitchPortEntry | EXPRESSGS-MIB |
| 1.3.6.1.4.1.343.6.13.7.4.1.1.5 | expressGSVirtualSwitchPortStatus | EXPRESSGS-MIB |