All MIBs › EXPRESSGS-MIB › expressGSL2AddressControlPersistence
expressGSL2AddressControlPersistence
Module: EXPRESSGS-MIB
OID (symbolic): EXPRESSGS-MIB::expressGSL2AddressControlPersistence
OID (numeric): 1.3.6.1.4.1.343.6.13.5.1.4.3.1.1.6
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: The persistence of the entry to be created:
permanent(1) - Address is not aged out. Additionally, if the address is seen as a source on a different port for this VLAN, the frame is filtered and the filter event is counted. Static address entries are stored in non-volatile memory and are restored to the address table following each system reset.
deleteOnReset(2) - Indicates that the entry is not to be aged, however the entry is not stored in non-volatile memory. Therefore, when the device is reset, the entry will not be restored.
deleteOnTimeout(3) - Indicates that the entry is to be aged by the normal aging process.
What is expressGSL2AddressControlPersistence?
Sets how the new static entry will be maintained: permanent(1) survives reboot and is stored in non-volatile memory, deleteOnReset(2) survives aging but is lost on reboot, or deleteOnTimeout(3) makes it subject to normal aging like a dynamic entry. An admin chooses permanent(1) for a critical server binding that must survive a switch restart.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.343.6.13.5.1.4.3.1.1.6 snmpwalk -v2c -c public <target> EXPRESSGS-MIB::expressGSL2AddressControlPersistence
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.343.6.13.5.1.4.3.1.1.6.1 snmpget -v2c -c public <target> EXPRESSGS-MIB::expressGSL2AddressControlPersistence.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.343.6.13.5.1.4.3.1.1.6.1 i <value>
Start monitoring Express Gigabit Switch (Intel-registered enterprise Ethernet switch) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the EXPRESSGS-MIB::expressGSL2AddressControlPersistence OID value, configure state conditions and alerts, and monitor any Express Gigabit Switch (Intel-registered enterprise Ethernet switch) from a single console.
OID Breakdown
Upper-level ancestors (7 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.343 | intel | AOLAN-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.343.6 | mib2ext | EXPRESSGS-MIB |
| 1.3.6.1.4.1.343.6.13 | esGigaSwitch | EXPRESSGS-MIB |
| 1.3.6.1.4.1.343.6.13.5 | expressGSSwitching | EXPRESSGS-MIB |
| 1.3.6.1.4.1.343.6.13.5.1 | expressGSSwitchingLayerII | EXPRESSGS-MIB |
| 1.3.6.1.4.1.343.6.13.5.1.4 | expressGSL2AddrMgmt | EXPRESSGS-MIB |
| 1.3.6.1.4.1.343.6.13.5.1.4.3 | expressGSL2AddrControlMgt | EXPRESSGS-MIB |
| 1.3.6.1.4.1.343.6.13.5.1.4.3.1 | expressGSL2AddressControlTable | EXPRESSGS-MIB |
| 1.3.6.1.4.1.343.6.13.5.1.4.3.1.1 | expressGSL2AddressControlEntry | EXPRESSGS-MIB |
| 1.3.6.1.4.1.343.6.13.5.1.4.3.1.1.6 | expressGSL2AddressControlPersistence | EXPRESSGS-MIB |