All MIBs › EXPRESSGS-MIB › expressGSVlanStatus
expressGSVlanStatus
Module: EXPRESSGS-MIB
OID (symbolic): EXPRESSGS-MIB::expressGSVlanStatus
OID (numeric): 1.3.6.1.4.1.343.6.13.7.1.1.1.6
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: The status of an entry to be created or deleted. When adding an entry all fields will be set, and then the status is set to createRequest(1) (indicating that the entry is to be created). When deleting an entry the status is set to destroyRequest(3) (indicating that the entry is to be destroyed). During creation the status will be underCreation(2). If the creation is successful, then the status will be set to active(5). Otherwise if the creation was not successful then one of the following error codes will be set and the entry will not be created: otherError(6) - An error other than the others defined. entryExistsError(7) - An entry already exists. invalidVlanID(8) - the VLAN ID is invalid. invalidVlanName(9) - the VLAN name is invalid. invalidVlanAFTIndex(10) - the VLAN AFT index is invalid. invalidVlanBridgeIndex(11) - the VLAN bridge index is invalid. invalidVlanInitialHashTableSize(12) - the VLAN initial hash table size is invalid. invalidVlanAutoIncrementHTSize(13) - the VLAN auto increment hash table size is invalid.
What is expressGSVlanStatus?
Drives creation and deletion of this VLAN entry: createRequest(1)/underCreation(2) during setup, destroyRequest(3)/underDestruction(4) during removal, active(5) once operational, or an error code such as entryExistsError(7) or invalidVlanID(8) if the operation failed. An admin sets createRequest(1) with the desired VLAN ID, name, and AFT/bridge index filled in to provision a new VLAN.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.343.6.13.7.1.1.1.6 snmpwalk -v2c -c public <target> EXPRESSGS-MIB::expressGSVlanStatus
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.343.6.13.7.1.1.1.6.1 snmpget -v2c -c public <target> EXPRESSGS-MIB::expressGSVlanStatus.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.343.6.13.7.1.1.1.6.1 i <value>
Start monitoring Express Gigabit Switch (Intel-registered enterprise Ethernet switch) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the EXPRESSGS-MIB::expressGSVlanStatus OID value, configure state conditions and alerts, and monitor any Express Gigabit Switch (Intel-registered enterprise Ethernet switch) from a single console.
OID Breakdown
Upper-level ancestors (7 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.343 | intel | AOLAN-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.343.6 | mib2ext | EXPRESSGS-MIB |
| 1.3.6.1.4.1.343.6.13 | esGigaSwitch | EXPRESSGS-MIB |
| 1.3.6.1.4.1.343.6.13.7 | expressGSVlanMgt | EXPRESSGS-MIB |
| 1.3.6.1.4.1.343.6.13.7.1 | expressGSVlans | EXPRESSGS-MIB |
| 1.3.6.1.4.1.343.6.13.7.1.1 | expressGSVlanTable | EXPRESSGS-MIB |
| 1.3.6.1.4.1.343.6.13.7.1.1.1 | expressGSVlanEntry | EXPRESSGS-MIB |
| 1.3.6.1.4.1.343.6.13.7.1.1.1.6 | expressGSVlanStatus | EXPRESSGS-MIB |