ACC-PSTN

All MIBs › ACC-PSTN

Category: Telephony and VoIP, Vendor: ACC/Ericsson

Description: Manages PSTN trunk interface configuration on ACC/Ericsson integrated access routers, including T1/E1 CAS signaling and call routing settings.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is ACC-PSTN?

ACC-PSTN is a vendor-specific SNMP module for ACC/Ericsson integrated access routers that manages PSTN trunk interfaces, including T1/E1 channel-associated signaling (CAS) and R2 signaling as well as DTMF handling for call routing. It exposes configuration and status data for the router's telephony trunk hardware, including signaling protocol parameters used to interconnect with the public switched telephone network. Its monitoring value centers on trunk/interface hardware status and signaling health — confirming DTMF and R2 signaling subsystems are functioning correctly on each PSTN trunk, which is analogous to interface/line status monitoring on a voice gateway. It works alongside the router's general PSTN/T1/E1 line MIBs and ACC's own interface MIBs. It is deployed in branch offices or POPs where an ACC router provides PSTN trunk connectivity alongside data services. Engineers can download the ACC-PSTN file directly to load it into their MIB browser.

IPNetwork Monitor allows you to monitor SNMP objects defined in ACC-PSTN. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

ACC/Ericsson integrated access router

Monitoring Examples

The sample objects accPstn, accDTMF, accDTMFo/accDTMFoo, and accR2Sig/accR2Sigo indicate this MIB groups DTMF detection and R2 signaling configuration and status under the top-level accPstn object. An administrator monitoring a PSTN trunk would poll the accDTMF and accR2Sig branches to confirm tone detection and R2 line signaling states are correct, which would reveal a failed or misconfigured trunk if DTMF digits are not being decoded or R2 signaling states are stuck. This is useful for diagnosing call setup failures on T1/E1 PSTN trunks.

What Can Be Monitored

PSTN trunk configuration
DTMF detection status
R2 signaling state
T1/E1 CAS signaling parameters

Imported Objects

From ACC-MIB

DisplayString
accBRG	OBJECT-IDENTITY

From ACC-SYSTEM

accTrapLogSeqNum

OBJECT-TYPE

From RFC-1215

TRAP-TYPE

From RFC1155-SMI

Counter
Gauge
IpAddress
OBJECT-TYPE
TimeTicks

From RFC1213-MIB

ifIndex

OIDs

OID symbolic	OID numeric	Type	Access	Description
accDPSig	1.3.6.1.4.1.5.1.1.69.8.3.5
accDPSigo	1.3.6.1.4.1.5.1.1.69.8.3.5.1
accDPSigoo	1.3.6.1.4.1.5.1.1.69.8.3.5.1.1
NTF accDsprmCucbErrTrap	1.3.6.1.4.1.5.1.1.69.7.0.3			Indicates that send has failed becuse of CUCB error SEVERITY-DEFAULT: Minor EVENTTYPE-DEFAULT: 2 ADDITIONAL-TEXT-VARIABLES: { accTrapLogSeqNum,accDsprmTrapMsg } PCAUSE-DEFAULT: 110
NTF accDsprmInvMplTrap	1.3.6.1.4.1.5.1.1.69.7.0.6			Indicates that a packet has been received with an invalid MPL type SEVERITY-DEFAULT: Major EVENTTYPE-DEFAULT: 2 ADDITIONAL-TEXT-VARIABLES: { accTrapLogSeqNum,accDsprmTrapMsg } PCAUSE-DEFAULT: 5
NTF accDsprmLdspNotInUseTrap	1.3.6.1.4.1.5.1.1.69.7.0.2			Indicates that send has failed becuse LDSP is not in use. SEVERITY-DEFAULT: Minor EVENTTYPE-DEFAULT: 2 ADDITIONAL-TEXT-VARIABLES: { accTrapLogSeqNum,accDsprmTrapMsg } PCAUSE-DEFAULT: 110
NTF accDsprmMemAllocTrap	1.3.6.1.4.1.5.1.1.69.7.0.5			Indicates that memory allocation failed for the NCI SEVERITY-DEFAULT: Major EVENTTYPE-DEFAULT: 10 ADDITIONAL-TEXT-VARIABLES: { accTrapLogSeqNum,accDsprmTrapMsg } PCAUSE-DEFAULT: 32
INT accDsprmMessageLevel	1.3.6.1.4.1.5.1.1.69.8.5.1	INTEGER	read-write	Level for depth of messages from the DSPRM.
NTF accDsprmNoDataTrap	1.3.6.1.4.1.5.1.1.69.7.0.4			Indicates that send has failed becuse of no data SEVERITY-DEFAULT: Minor EVENTTYPE-DEFAULT: 2 ADDITIONAL-TEXT-VARIABLES: { accTrapLogSeqNum,accDsprmTrapMsg } PCAUSE-DEFAULT: 110
NTF accDsprmRelnqshFailTrap	1.3.6.1.4.1.5.1.1.69.7.0.1			Indicates that Relinquish has failed. SEVERITY-DEFAULT: Indeterminate EVENTTYPE-DEFAULT: 10 ADDITIONAL-TEXT-VARIABLES: { accTrapLogSeqNum,accDsprmTrapMsg } PCAUSE-DEFAULT: 0
STR accDsprmTrapMsg	1.3.6.1.4.1.5.1.1.69.7.1	DisplayString	read-write	Trap message object for level-1 traps of DSPRM module
accDsprmTraps	1.3.6.1.4.1.5.1.1.69.7
accDTMF	1.3.6.1.4.1.5.1.1.69.8.3.4
accDTMFo	1.3.6.1.4.1.5.1.1.69.8.3.4.1
accDTMFoo	1.3.6.1.4.1.5.1.1.69.8.3.4.1.1
accEMLinSup	1.3.6.1.4.1.5.1.1.69.8.4.4.1
accEMLinSupo	1.3.6.1.4.1.5.1.1.69.8.4.4.1.1
accMisc	1.3.6.1.4.1.5.1.1.69.8.5
accNewLiberty	1.3.6.1.4.1.5.1.1.69.8
accPstn	1.3.6.1.4.1.5.1.1.69
INT accPstnBckGenGA	1.3.6.1.4.1.5.1.1.69.8.3.3.2.10	INTEGER	read-write	Backward generation GA possible token values.
INT accPstnBckGenGB	1.3.6.1.4.1.5.1.1.69.8.3.3.2.11	INTEGER	read-write	Backward generation GB possible token values.
INT accPstnBckGenGC	1.3.6.1.4.1.5.1.1.69.8.3.3.2.12	INTEGER	read-write	Backward generation GC possible token values.
INT accPstnBckIntGA	1.3.6.1.4.1.5.1.1.69.8.3.3.2.7	INTEGER	read-write	Backward interpretation GA possible token values.
INT accPstnBckIntGB	1.3.6.1.4.1.5.1.1.69.8.3.3.2.8	INTEGER	read-write	Backward interpretation GB possible token values.
INT accPstnBckIntGC	1.3.6.1.4.1.5.1.1.69.8.3.3.2.9	INTEGER	read-write	Backward interpretation GC possible token values.
accPstnCallTable	1.3.6.1.4.1.5.1.1.69.3		not-accessible	A list of PSTN call entries.
accPstnCallTableEntry	1.3.6.1.4.1.5.1.1.69.3.1		not-accessible	A table entry providing information about a specific call.
accPstnChanTable	1.3.6.1.4.1.5.1.1.69.4		not-accessible	Table of PSTN channel parameters.
accPstnChanTableEntry	1.3.6.1.4.1.5.1.1.69.4.1		not-accessible	Entry of PSTN channel parameter table.
INT accPstnDisplayBGTableSet1	1.3.6.1.4.1.5.1.1.69.8.3.3.2.22	INTEGER	read-write	Display object for TBLSET 1, backward generation
INT accPstnDisplayBGTableSet2	1.3.6.1.4.1.5.1.1.69.8.3.3.2.23	INTEGER	read-write	Display object for TBLSET 2, backward generation
INT accPstnDisplayBGTableSet3	1.3.6.1.4.1.5.1.1.69.8.3.3.2.24	INTEGER	read-write	Display object for TBLSET 3, backward generation
INT accPstnDisplayBGTableSet4	1.3.6.1.4.1.5.1.1.69.8.3.3.2.25	INTEGER	read-write	Display object for TBLSET 4, backward generation
INT accPstnDisplayBITableSet1	1.3.6.1.4.1.5.1.1.69.8.3.3.2.26	INTEGER	read-write	Display object for TBLSET 1, backward interpretation
INT accPstnDisplayBITableSet2	1.3.6.1.4.1.5.1.1.69.8.3.3.2.27	INTEGER	read-write	Display object for TBLSET 2, backward interpretation
INT accPstnDisplayBITableSet3	1.3.6.1.4.1.5.1.1.69.8.3.3.2.28	INTEGER	read-write	Display object for TBLSET 3, backward interpretation
INT accPstnDisplayBITableSet4	1.3.6.1.4.1.5.1.1.69.8.3.3.2.29	INTEGER	read-write	Display object for TBLSET 4, backward interpretation
INT accPstnDisplayFGTableSet1	1.3.6.1.4.1.5.1.1.69.8.3.3.2.14	INTEGER	read-write	Display object for TBLSET 1, forward generation
INT accPstnDisplayFGTableSet2	1.3.6.1.4.1.5.1.1.69.8.3.3.2.15	INTEGER	read-write	Display object for TBLSET 2, forward generation
INT accPstnDisplayFGTableSet3	1.3.6.1.4.1.5.1.1.69.8.3.3.2.16	INTEGER	read-write	Display object for TBLSET 3, forward generation
INT accPstnDisplayFGTableSet4	1.3.6.1.4.1.5.1.1.69.8.3.3.2.17	INTEGER	read-write	Display object for TBLSET 4, forward generation
INT accPstnDisplayFITableSet1	1.3.6.1.4.1.5.1.1.69.8.3.3.2.18	INTEGER	read-write	Display object for TBLSET 1, forward interpretation
INT accPstnDisplayFITableSet2	1.3.6.1.4.1.5.1.1.69.8.3.3.2.19	INTEGER	read-write	Display object for TBLSET 2, forward interpretation
INT accPstnDisplayFITableSet3	1.3.6.1.4.1.5.1.1.69.8.3.3.2.20	INTEGER	read-write	Display object for TBLSET 3, forward interpretation
INT accPstnDisplayFITableSet4	1.3.6.1.4.1.5.1.1.69.8.3.3.2.21	INTEGER	read-write	Display object for TBLSET 4, forward interpretation
accPstnEtt	1.3.6.1.4.1.5.1.1.69.8.3.3
INT accPstnFwdGenGI	1.3.6.1.4.1.5.1.1.69.8.3.3.2.5	INTEGER	read-write	Forward generation GI possible token values.
INT accPstnFwdGenGII	1.3.6.1.4.1.5.1.1.69.8.3.3.2.6	INTEGER	read-write	Forward generation GII possible token values.
INT accPstnFwdIntGI	1.3.6.1.4.1.5.1.1.69.8.3.3.2.3	INTEGER	read-write	Forward interpretation GI possible token values.
INT accPstnFwdIntGII	1.3.6.1.4.1.5.1.1.69.8.3.3.2.4	INTEGER	read-write	Forward interpretation GII possible token values.
accPstnIntCasSupvParamEntry	1.3.6.1.4.1.5.1.1.69.6.1		not-accessible	PSTN line supervision parameter-table entry.
accPstnIntCasSupvParamTable	1.3.6.1.4.1.5.1.1.69.6		not-accessible	Table of PSTN line supervision parameters.
INT accPstnOperstatus	1.3.6.1.4.1.5.1.1.69.8.5.3	INTEGER	read-write	Current use of DSP (unallocated, idle, modem...)
accPstnRBSParamTable	1.3.6.1.4.1.5.1.1.69.5		not-accessible	A table containing RBS parameters.
accPstnRBSParamTableEntry	1.3.6.1.4.1.5.1.1.69.5.1		not-accessible	An RBS parameter-table entry.
INT accPstnSignal	1.3.6.1.4.1.5.1.1.69.8.3.3.2.2	INTEGER	read-write	Signal currently in use (for tonetable).
accPstnStatEntry	1.3.6.1.4.1.5.1.1.69.2.1		not-accessible	Management information PSTN statistics.
accPstnStatTable	1.3.6.1.4.1.5.1.1.69.2		not-accessible	A table containing PSTN statistics.
accPstnSubTabEntry	1.3.6.1.4.1.5.1.1.69.1.1		not-accessible	PSTN subscriber entry-table parameters.
accPstnSubTable	1.3.6.1.4.1.5.1.1.69.1		not-accessible	Table of PSTN subscriber entry parameters.
accPstnSupGen	1.3.6.1.4.1.5.1.1.69.8.4.4
INT accPstnTable	1.3.6.1.4.1.5.1.1.69.8.3.3.2.1	INTEGER	read-write	Used for set tonetable command, determines which TBLSET will be set.
INT accPstnTableDef	1.3.6.1.4.1.5.1.1.69.8.3.3.2.13	INTEGER	read-write	Default tonetable values. (sets all 4 TBLSETs, current will be set upon system reset.
INT accPstnTableInt	1.3.6.1.4.1.5.1.1.69.8.3.3.1.1.22	INTEGER	read-write	TBLSET currently in use.
INT accPstnTabLineTrace	1.3.6.1.4.1.5.1.1.69.8.4.1	INTEGER	read-write	Depth of messages to be displayed in the trace.
INT accPstnTabPstnDslIndex	1.3.6.1.4.1.5.1.1.69.8.5.2	INTEGER	read-write	Wonky index, used for displaying tables. (c/o james)
INT accPstnTabSigDpBrkTime	1.3.6.1.4.1.5.1.1.69.8.3.5.1.1.7	INTEGER	read-write	Break timer for pulse dialing.
INT accPstnTabSigDpCpEnd	1.3.6.1.4.1.5.1.1.69.8.3.5.1.1.1	INTEGER	read-write	Action to be performed at end of dial pulse callprogress signaling.
INT accPstnTabSigDpCpSt	1.3.6.1.4.1.5.1.1.69.8.3.5.1.1.2	INTEGER	read-write	Action to be performed at start of dial pulse callprogress signaling.
INT accPstnTabSigDpCpTo	1.3.6.1.4.1.5.1.1.69.8.3.5.1.1.3	INTEGER	read-write	Dial pulse callprogress timeout.
INT accPstnTabSigDpDt	1.3.6.1.4.1.5.1.1.69.8.3.5.1.1.4	INTEGER	read-write	Timer for dial pulse digit timeout.
INT accPstnTabSigDpIdTime	1.3.6.1.4.1.5.1.1.69.8.3.5.1.1.8	INTEGER	read-write	Idle time used for dial pulse digit timing.
INT accPstnTabSigDpMkTime	1.3.6.1.4.1.5.1.1.69.8.3.5.1.1.9	INTEGER	read-write	Make time used for dial pulse digit timing.
INT accPstnTabSigDpPm	1.3.6.1.4.1.5.1.1.69.8.3.5.1.1.5	INTEGER	read-write	Parsemask for dial pulse signaling.
INT accPstnTabSigDpPmCo	1.3.6.1.4.1.5.1.1.69.8.3.5.1.1.6	INTEGER	read-write	Count of digits in the dial pulse parsemask.
INT accPstnTabSigDpSt	1.3.6.1.4.1.5.1.1.69.8.3.5.1.1.10	INTEGER	read-write	Signal duration for use in dial pulse sigtimeout.
INT accPstnTabSigDtCpEnd	1.3.6.1.4.1.5.1.1.69.8.3.4.1.1.1	INTEGER	read-write	Call progress end timer for DTMF signaling.
INT accPstnTabSigDtCpSt	1.3.6.1.4.1.5.1.1.69.8.3.4.1.1.2	INTEGER	read-write	Call progress start timer for DTMF signaling.
INT accPstnTabSigDtCpTo	1.3.6.1.4.1.5.1.1.69.8.3.4.1.1.3	INTEGER	read-write	Call progress timeout timer for DTMF signaling.
INT accPstnTabSigDtDt	1.3.6.1.4.1.5.1.1.69.8.3.4.1.1.4	INTEGER	read-write	Digit timeout timer for DTMF signaling.
INT accPstnTabSigDtHiPwr	1.3.6.1.4.1.5.1.1.69.8.3.4.1.1.10	INTEGER	read-write	Power of high frequency tone for DTMF signaling.
INT accPstnTabSigDtIbCpSt	1.3.6.1.4.1.5.1.1.69.8.3.4.1.1.5	INTEGER	read-write	If set to DIAL, ibcallprogress will wait for a dial tone from the other side before starting the call, when set to NONE, it won't.
INT accPstnTabSigDtIbCpTp	1.3.6.1.4.1.5.1.1.69.8.3.4.1.1.6	INTEGER	read-write	Tonepower setting for inbound DTMF calls, from zero to -12 dB.
INT accPstnTabSigDtLoPwr	1.3.6.1.4.1.5.1.1.69.8.3.4.1.1.11	INTEGER	read-write	Power of low frequency tone for DTMF signaling.
INT accPstnTabSigDtOffTime	1.3.6.1.4.1.5.1.1.69.8.3.4.1.1.12	INTEGER	read-write	Off time for DTMF digit tonetiming.
INT accPstnTabSigDtOnTime	1.3.6.1.4.1.5.1.1.69.8.3.4.1.1.13	INTEGER	read-write	On time for DTMF digit tonetiming.
INT accPstnTabSigDtPm	1.3.6.1.4.1.5.1.1.69.8.3.4.1.1.7	INTEGER	read-write	Parsemask for DTMF signaling.
INT accPstnTabSigDtPmCo	1.3.6.1.4.1.5.1.1.69.8.3.4.1.1.8	INTEGER	read-write	Number of digits in the DTMF parsemask.
INT accPstnTabSigDtSt	1.3.6.1.4.1.5.1.1.69.8.3.4.1.1.9	INTEGER	read-write	DTMF (touch tone) signal timeout.
accPstnTabSigGen	1.3.6.1.4.1.5.1.1.69.8.3
accPstnTabSigGenT	1.3.6.1.4.1.5.1.1.69.8.4
INT accPstnTabSigInType	1.3.6.1.4.1.5.1.1.69.8.3.2.1	INTEGER	read-write	Inbound signaling type.
INT accPstnTabSigOutType	1.3.6.1.4.1.5.1.1.69.8.3.2.2	INTEGER	read-write	Outbound signaling type.
INT accPstnTabSigR2AdMo	1.3.6.1.4.1.5.1.1.69.8.3.3.1.1.4	INTEGER	read-write	Group table to use for address termination.
INT accPstnTabSigR2CdDig	1.3.6.1.4.1.5.1.1.69.8.3.3.1.1.1	INTEGER	read-write	Number of called digits to request for an R2 signaling call.
INT accPstnTabSigR2CdInMode	1.3.6.1.4.1.5.1.1.69.8.3.3.1.1.5	INTEGER	read-write	Defines the method used to signal a stop after receiving the called number digits.
INT accPstnTabSigR2CdOutMode	1.3.6.1.4.1.5.1.1.69.8.3.3.1.1.6	INTEGER	read-write	Defines the method used to signal a stop after sending the called number digits.
INT accPstnTabSigR2CnDig	1.3.6.1.4.1.5.1.1.69.8.3.3.1.1.2	INTEGER	read-write	Number of calling digits to request for an R2 signaling call.
INT accPstnTabSigR2CnInMode	1.3.6.1.4.1.5.1.1.69.8.3.3.1.1.7	INTEGER	read-write	Defines the method used to signal a stop after receiving the calling number digits.
INT accPstnTabSigR2CnOutMode	1.3.6.1.4.1.5.1.1.69.8.3.3.1.1.8	INTEGER	read-write	Defines the mode used to stop sending the calling number digits.
INT accPstnTabSigR2InDur	1.3.6.1.4.1.5.1.1.69.8.3.3.1.1.16	INTEGER	read-write	Signaling timeout for inbound R2 calls.
INT accPstnTabSigR2InHiPwr	1.3.6.1.4.1.5.1.1.69.8.3.3.1.1.18	INTEGER	read-write	High frequency tonepower setting for incoming calls.
INT accPstnTabSigR2InLoPwr	1.3.6.1.4.1.5.1.1.69.8.3.3.1.1.19	INTEGER	read-write	Low frequency tonepower setting for incoming calls.
INT accPstnTabSigR2ObCpc	1.3.6.1.4.1.5.1.1.69.8.3.3.1.1.11	INTEGER	read-write	Calling party category used for outbound calls.
INT accPstnTabSigR2ObDflt	1.3.6.1.4.1.5.1.1.69.8.3.3.1.1.12	INTEGER	read-write	Called number used for outbound calls.
INT accPstnTabSigR2OutDur	1.3.6.1.4.1.5.1.1.69.8.3.3.1.1.17	INTEGER	read-write	Signaling timeout for outbound R2 calls.
INT accPstnTabSigR2OutHiPwr	1.3.6.1.4.1.5.1.1.69.8.3.3.1.1.20	INTEGER	read-write	High frequency tone power setting for outbound calls.
INT accPstnTabSigR2OutLoPwr	1.3.6.1.4.1.5.1.1.69.8.3.3.1.1.21	INTEGER	read-write	Low frequency tone power setting for outbound calls.
INT accPstnTabSigR2ReqCpc	1.3.6.1.4.1.5.1.1.69.8.3.3.1.1.3	INTEGER	read-write	This object holds the calling party category.
INT accPstnTabSigR2RspInDur	1.3.6.1.4.1.5.1.1.69.8.3.3.1.1.14	INTEGER	read-write	Maximum inbound signaling response duration for R2 signaling.
INT accPstnTabSigR2RspInMode	1.3.6.1.4.1.5.1.1.69.8.3.3.1.1.9	INTEGER	read-write	Mode used for inbound call signaling (compelled, semi-compelled, none).
INT accPstnTabSigR2RspOutDur	1.3.6.1.4.1.5.1.1.69.8.3.3.1.1.15	INTEGER	read-write	Maximum outbound signaling response duration for R2 signaling.
INT accPstnTabSigR2RspOutMode	1.3.6.1.4.1.5.1.1.69.8.3.3.1.1.10	INTEGER	read-write	Mode used for outbound call signaling (compelled, semi-compelled, none).
INT accPstnTabSigR2ScDur	1.3.6.1.4.1.5.1.1.69.8.3.3.1.1.13	INTEGER	read-write	Holds the semi-compelled tone duration, used in either direction (inbound, outbound).
INT accPstnTabSigTrace	1.3.6.1.4.1.5.1.1.69.8.3.1	INTEGER	read-write	Depth of the trace level displayed in the trap log.
accPstnTabSigType	1.3.6.1.4.1.5.1.1.69.8.3.2
INT accPstnTabSupEmDsInDur	1.3.6.1.4.1.5.1.1.69.8.4.4.1.1.11	INTEGER	read-write	E&M delay dial start delay incoming timeout.
INT accPstnTabSupEmDsOutEndTo	1.3.6.1.4.1.5.1.1.69.8.4.4.1.1.12	INTEGER	read-write	E&M delay dial start delay outgoing end timeout.
INT accPstnTabSupEmDsOutStDly	1.3.6.1.4.1.5.1.1.69.8.4.4.1.1.1	INTEGER	read-write	Delay Dial Start Dial delay time for outbound E&M calls
INT accPstnTabSupEmDsOutStTo	1.3.6.1.4.1.5.1.1.69.8.4.4.1.1.13	INTEGER	read-write	E&M delay dial start delay outgoing start timeout.
INT accPstnTabSupEmGl	1.3.6.1.4.1.5.1.1.69.8.4.4.1.1.2	INTEGER	read-write	Notifies call of what to do if glare (call attempts in opposite directions on the same line, at the same time) occurs.
INT accPstnTabSupEmImOutStDly	1.3.6.1.4.1.5.1.1.69.8.4.4.1.1.3	INTEGER	read-write	Start delay for use in Immediate Start Mode
INT accPstnTabSupEmWiInDur	1.3.6.1.4.1.5.1.1.69.8.4.4.1.1.4	INTEGER	read-write	Duration of incoming wink timer.
INT accPstnTabSupEmWiOutEndTo	1.3.6.1.4.1.5.1.1.69.8.4.4.1.1.5	INTEGER	read-write	Wink end timeout for outgoing E&M calls.
INT accPstnTabSupEmWiOutStDly	1.3.6.1.4.1.5.1.1.69.8.4.4.1.1.6	INTEGER	read-write	Wink start delay duration for outgoing E&M calls.
INT accPstnTabSupEmWiOutStTo	1.3.6.1.4.1.5.1.1.69.8.4.4.1.1.7	INTEGER	read-write	Wink start timeout duration for outgoing E&M calls.
INT accPstnTabSupInMode	1.3.6.1.4.1.5.1.1.69.8.4.4.1.1.8	INTEGER	read-write	E&M incoming call mode.
INT accPstnTabSupOutMode	1.3.6.1.4.1.5.1.1.69.8.4.4.1.1.9	INTEGER	read-write	E&M outgoing call mode.
INT accPstnTabSupR2AnAnsDly	1.3.6.1.4.1.5.1.1.69.8.4.4.3.1	INTEGER	read-write	Answer delay duration.
INT accPstnTabSupR2AnInPat	1.3.6.1.4.1.5.1.1.69.8.4.4.3.2	INTEGER	read-write	Answer pattern used for incoming calls.
INT accPstnTabSupR2AnOutPat	1.3.6.1.4.1.5.1.1.69.8.4.4.3.3	INTEGER	read-write	Answer pattern used for outgoing calls.
INT accPstnTabSupR2AnRecTime	1.3.6.1.4.1.5.1.1.69.8.4.4.3.4	INTEGER	read-write	Recognition timer for answer pattern.
INT accPstnTabSupR2BlInPat	1.3.6.1.4.1.5.1.1.69.8.4.4.3.5	INTEGER	read-write	Blocking pattern for incoming R2 calls.
INT accPstnTabSupR2BlOutPat	1.3.6.1.4.1.5.1.1.69.8.4.4.3.6	INTEGER	read-write	Blocking pattern for outgoing R2 calls.
INT accPstnTabSupR2BlRecTime	1.3.6.1.4.1.5.1.1.69.8.4.4.3.7	INTEGER	read-write	Recognition timer for block pattern.
INT accPstnTabSupR2CbFcbTime	1.3.6.1.4.1.5.1.1.69.8.4.4.3.8	INTEGER	read-write	Forced clearback timer duration.
INT accPstnTabSupR2CbInPat	1.3.6.1.4.1.5.1.1.69.8.4.4.3.9	INTEGER	read-write	Clear backward pattern for incoming R2 calls.
INT accPstnTabSupR2CbOutPat	1.3.6.1.4.1.5.1.1.69.8.4.4.3.10	INTEGER	read-write	Clear backward pattern for outgoing R2 calls.
INT accPstnTabSupR2CbRecTime	1.3.6.1.4.1.5.1.1.69.8.4.4.3.11	INTEGER	read-write	Recognition timer for clear backward pattern.
INT accPstnTabSupR2CfInPat	1.3.6.1.4.1.5.1.1.69.8.4.4.3.12	INTEGER	read-write	Clear forward pattern for incoming R2 calls.
INT accPstnTabSupR2CfOutPat	1.3.6.1.4.1.5.1.1.69.8.4.4.3.13	INTEGER	read-write	Clear forward pattern for outgoing R2 calls.
INT accPstnTabSupR2CfRecTime	1.3.6.1.4.1.5.1.1.69.8.4.4.3.14	INTEGER	read-write	Recognition timer for clear forward pattern.
INT accPstnTabSupR2Gl	1.3.6.1.4.1.5.1.1.69.8.4.4.3.15	INTEGER	read-write	Action to be taken if glare (call attempts in opposite directions on the same line, at the same time) occurs.
INT accPstnTabSupR2IdInPat	1.3.6.1.4.1.5.1.1.69.8.4.4.3.16	INTEGER	read-write	Idle pattern for incoming R2 calls.
INT accPstnTabSupR2IdOutPat	1.3.6.1.4.1.5.1.1.69.8.4.4.3.17	INTEGER	read-write	Idle pattern for outgoing R2 calls.
INT accPstnTabSupR2IdRecTime	1.3.6.1.4.1.5.1.1.69.8.4.4.3.18	INTEGER	read-write	Recognition timer for Idle R2 signaling.
INT accPstnTabSupR2Mask	1.3.6.1.4.1.5.1.1.69.8.4.4.3.19	INTEGER	read-write	Parse mask used for R2 line supervision.
INT accPstnTabSupR2MeDly	1.3.6.1.4.1.5.1.1.69.8.4.4.3.29	INTEGER	read-write	Delay timer for the metering patterns.
INT accPstnTabSupR2MeInPat	1.3.6.1.4.1.5.1.1.69.8.4.4.3.26	INTEGER	read-write	Inbound metering pattern.
INT accPstnTabSupR2MeOffTime	1.3.6.1.4.1.5.1.1.69.8.4.4.3.30	INTEGER	read-write	Metering pattern offtime timer
INT accPstnTabSupR2MeOnTime	1.3.6.1.4.1.5.1.1.69.8.4.4.3.31	INTEGER	read-write	Metering pattern ontime.
INT accPstnTabSupR2MeOutPat	1.3.6.1.4.1.5.1.1.69.8.4.4.3.27	INTEGER	read-write	Outbound metering pattern.
INT accPstnTabSupR2MeRecTime	1.3.6.1.4.1.5.1.1.69.8.4.4.3.28	INTEGER	read-write	Recognition timer for the metering patterns.
INT accPstnTabSupR2SaInPat	1.3.6.1.4.1.5.1.1.69.8.4.4.3.20	INTEGER	read-write	Inbound call pattern for szack R2 signaling.
INT accPstnTabSupR2SaOutPat	1.3.6.1.4.1.5.1.1.69.8.4.4.3.21	INTEGER	read-write	Outbound call pattern for szack R2 signaling.
INT accPstnTabSupR2SaRecTime	1.3.6.1.4.1.5.1.1.69.8.4.4.3.22	INTEGER	read-write	Recognition timer for szack R2 signaling.
INT accPstnTabSupR2SzInPat	1.3.6.1.4.1.5.1.1.69.8.4.4.3.23	INTEGER	read-write	Inbound call pattern for seize R2 signaling.
INT accPstnTabSupR2SzOutPat	1.3.6.1.4.1.5.1.1.69.8.4.4.3.24	INTEGER	read-write	Outbound call pattern for seize R2 signaling.
INT accPstnTabSupR2SzRecTime	1.3.6.1.4.1.5.1.1.69.8.4.4.3.25	INTEGER	read-write	Recognition timer for seize signaling.
INT accPstnTabSupType	1.3.6.1.4.1.5.1.1.69.8.4.2	INTEGER	read-write	Line supervision type.
INT accPstnTTIndex	1.3.6.1.4.1.5.1.1.69.8.3.3.3	INTEGER	read-write	Setting default timer for tonetables
accR2LinSupoo	1.3.6.1.4.1.5.1.1.69.8.4.4.3
accR2Sig	1.3.6.1.4.1.5.1.1.69.8.3.3.1
accR2Sigo	1.3.6.1.4.1.5.1.1.69.8.3.3.1.1
accToneSupoo	1.3.6.1.4.1.5.1.1.69.8.3.3.2
INT oPstnCallTabAddress	1.3.6.1.4.1.5.1.1.69.3.1.8	INTEGER	read-only	PSTN Call Table Address.
INT oPstnCallTabCallId	1.3.6.1.4.1.5.1.1.69.3.1.2	INTEGER	read-only	PSTN Call Table Call ID.
INT oPstnCallTabCause	1.3.6.1.4.1.5.1.1.69.3.1.7	INTEGER	read-only	PSTN Call Table State.
INT oPstnCallTabChannel	1.3.6.1.4.1.5.1.1.69.3.1.4	INTEGER	read-only	PSTN Call Table Channel.
INT oPstnCallTabDslIndex	1.3.6.1.4.1.5.1.1.69.3.1.1	INTEGER	read-only	PSTN Call Table Dsl Index.
INT oPstnCallTabDuration	1.3.6.1.4.1.5.1.1.69.3.1.11	INTEGER	read-only	PSTN Call Table Duration.
INT oPstnCallTabEndpoint	1.3.6.1.4.1.5.1.1.69.3.1.5	INTEGER	read-only	PSTN Call Table Endpoint.
INT oPstnCallTabInfoRate	1.3.6.1.4.1.5.1.1.69.3.1.9	INTEGER	read-only	PSTN Call Table Info Rate.
INT oPstnCallTabInfoType	1.3.6.1.4.1.5.1.1.69.3.1.10	INTEGER	read-only	PSTN Call Table Info Type.
INT oPstnCallTabOrigin	1.3.6.1.4.1.5.1.1.69.3.1.3	INTEGER	read-only	PSTN Call Table Origin.
INT oPstnCallTabState	1.3.6.1.4.1.5.1.1.69.3.1.6	INTEGER	read-only	PSTN Call Table State.
INT oPstnCasTabDslIndex	1.3.6.1.4.1.5.1.1.69.6.1.1	INTEGER	read-only	PSTN CAS Table Dsl Index.
INT oPstnCasTabRegComp1Off	1.3.6.1.4.1.5.1.1.69.6.1.29	INTEGER	read-write	PSTN CAS Table Register Signaling Completion One Tone Off Time.
INT oPstnCasTabRegComp1On	1.3.6.1.4.1.5.1.1.69.6.1.28	INTEGER	read-write	PSTN CAS Table Register Signaling Completion One Tone On Time.
INT oPstnCasTabRegComp1Tone	1.3.6.1.4.1.5.1.1.69.6.1.27	INTEGER	read-write	PSTN CAS Table Register Signaling Completion One Tone.
INT oPstnCasTabRegComp2Off	1.3.6.1.4.1.5.1.1.69.6.1.32	INTEGER	read-write	PSTN CAS Table Register Signaling Completion Two Tone Off Time.
INT oPstnCasTabRegComp2On	1.3.6.1.4.1.5.1.1.69.6.1.31	INTEGER	read-write	PSTN CAS Table Register Signaling Completion Two Tone On Time.
INT oPstnCasTabRegComp2Tone	1.3.6.1.4.1.5.1.1.69.6.1.30	INTEGER	read-write	PSTN CAS Table Register Signaling Completion Two Tone.
INT oPstnCasTabRegModeIn	1.3.6.1.4.1.5.1.1.69.6.1.25	INTEGER	read-write	PSTN CAS Table Register Signaling Mode - Incoming.
INT oPstnCasTabRegModeOut	1.3.6.1.4.1.5.1.1.69.6.1.26	INTEGER	read-write	PSTN CAS Table Register Signaling Mode - Outgoing.
INT oPstnCasTabSupvAnswerPatt	1.3.6.1.4.1.5.1.1.69.6.1.11	INTEGER	read-write	PSTN CAS Table Line Supervision Answer Pattern.
INT oPstnCasTabSupvAnswerTime	1.3.6.1.4.1.5.1.1.69.6.1.12	INTEGER	read-write	PSTN CAS Table Line Supervision Answer Time.
INT oPstnCasTabSupvBlockPatt	1.3.6.1.4.1.5.1.1.69.6.1.17	INTEGER	read-write	PSTN CAS Table Line Supervision Block Pattern.
INT oPstnCasTabSupvBlockTime	1.3.6.1.4.1.5.1.1.69.6.1.18	INTEGER	read-write	PSTN CAS Table Line Supervision Block Time.
INT oPstnCasTabSupvClrBackPatt	1.3.6.1.4.1.5.1.1.69.6.1.15	INTEGER	read-write	PSTN CAS Table Line Supervision Clear Back Pattern.
INT oPstnCasTabSupvClrBackTime	1.3.6.1.4.1.5.1.1.69.6.1.16	INTEGER	read-write	PSTN CAS Table Line Supervision Clear Back Time.
INT oPstnCasTabSupvClrForwPatt	1.3.6.1.4.1.5.1.1.69.6.1.13	INTEGER	read-write	PSTN CAS Table Line Supervision Clear Forward Pattern.
INT oPstnCasTabSupvClrForwTime	1.3.6.1.4.1.5.1.1.69.6.1.14	INTEGER	read-write	PSTN CAS Table Line Supervision Clear Forward Time.
INT oPstnCasTabSupvGlare	1.3.6.1.4.1.5.1.1.69.6.1.24	INTEGER	read-write	PSTN CAS Table Line Supervision Glare Behavior.
INT oPstnCasTabSupvIdlePatt	1.3.6.1.4.1.5.1.1.69.6.1.5	INTEGER	read-write	PSTN CAS Table Line Supervision Idle Pattern.
INT oPstnCasTabSupvIdleTime	1.3.6.1.4.1.5.1.1.69.6.1.6	INTEGER	read-write	PSTN CAS Table Line Supervision Idle Time.
INT oPstnCasTabSupvMask	1.3.6.1.4.1.5.1.1.69.6.1.4	INTEGER	read-write	PSTN CAS Table Line Supervision Mask.
INT oPstnCasTabSupvMetDelay	1.3.6.1.4.1.5.1.1.69.6.1.21	INTEGER	read-write	PSTN CAS Table Line Supervision Metering Delay.
INT oPstnCasTabSupvMetOff	1.3.6.1.4.1.5.1.1.69.6.1.23	INTEGER	read-write	PSTN CAS Table Line Supervision Metering Off.
INT oPstnCasTabSupvMetOn	1.3.6.1.4.1.5.1.1.69.6.1.22	INTEGER	read-write	PSTN CAS Table Line Supervision Metering On.
INT oPstnCasTabSupvMetPatt	1.3.6.1.4.1.5.1.1.69.6.1.19	INTEGER	read-write	PSTN CAS Table Line Supervision Metering Pattern.
INT oPstnCasTabSupvMetTime	1.3.6.1.4.1.5.1.1.69.6.1.20	INTEGER	read-write	PSTN CAS Table Line Supervision Metering Time.
INT oPstnCasTabSupvModeIn	1.3.6.1.4.1.5.1.1.69.6.1.2	INTEGER	read-write	PSTN CAS Table Line Supervision Mode - Incoming.
INT oPstnCasTabSupvModeOut	1.3.6.1.4.1.5.1.1.69.6.1.3	INTEGER	read-write	PSTN CAS Table Line Supervision Mode - Outgoing.
INT oPstnCasTabSupvSeizeAckPatt	1.3.6.1.4.1.5.1.1.69.6.1.9	INTEGER	read-write	PSTN CAS Table Line Supervision Seize Ack Pattern.
INT oPstnCasTabSupvSeizeAckTime	1.3.6.1.4.1.5.1.1.69.6.1.10	INTEGER	read-write	PSTN CAS Table Line Supervision Seize Ack Time.
INT oPstnCasTabSupvSeizePatt	1.3.6.1.4.1.5.1.1.69.6.1.7	INTEGER	read-write	PSTN CAS Table Line Supervision Seize Pattern.
INT oPstnCasTabSupvSeizeTime	1.3.6.1.4.1.5.1.1.69.6.1.8	INTEGER	read-write	PSTN CAS Table Line Supervision Seize Time.
INT oPstnChanTabChannel	1.3.6.1.4.1.5.1.1.69.4.1.2	INTEGER	read-only	PSTN Channel Table Channel.
INT oPstnChanTabChanState	1.3.6.1.4.1.5.1.1.69.4.1.4	INTEGER	read-only	PSTN Channel Table Channel State.
INT oPstnChanTabDslIndex	1.3.6.1.4.1.5.1.1.69.4.1.1	INTEGER	read-only	PSTN Channel Table Dsl Index.
INT oPstnChanTabServState	1.3.6.1.4.1.5.1.1.69.4.1.3	INTEGER	read-only	PSTN Channel Table Service State.
INT oPstnChanTabSlotMap	1.3.6.1.4.1.5.1.1.69.4.1.5	INTEGER	read-only	PSTN Channel Table Slot Map.
INT oPstnRbsTabDslIndex	1.3.6.1.4.1.5.1.1.69.5.1.1	INTEGER	read-only	PSTN RBS Table Dsl Index.
INT oPstnRbsTabEnblocDigits	1.3.6.1.4.1.5.1.1.69.5.1.12	INTEGER	read-write	PSTN RBS Table Enbloc Digits.
INT oPstnRbsTabEnblocTimeout	1.3.6.1.4.1.5.1.1.69.5.1.13	INTEGER	read-write	PSTN RBS Table Enbloc Timeout.
INT oPstnRbsTabGlareAction	1.3.6.1.4.1.5.1.1.69.5.1.8	INTEGER	read-write	PSTN RBS Table Glare Action.
INT oPstnRbsTabPresModeIn	1.3.6.1.4.1.5.1.1.69.5.1.6	INTEGER	read-write	PSTN RBS Table Pres Mode - Incoming.
INT oPstnRbsTabPresModeOut	1.3.6.1.4.1.5.1.1.69.5.1.7	INTEGER	read-write	PSTN RBS Table Pres Mode - outgoing.
INT oPstnRbsTabRegnModeIn	1.3.6.1.4.1.5.1.1.69.5.1.4	INTEGER	read-write	PSTN RBS Table Register Signaling Mode - Incoming.
INT oPstnRbsTabRegnModeOut	1.3.6.1.4.1.5.1.1.69.5.1.5	INTEGER	read-write	PSTN RBS Table Register Signaling Mode - Outgoing.
INT oPstnRbsTabSuprModeIn	1.3.6.1.4.1.5.1.1.69.5.1.2	INTEGER	read-write	PSTN RBS Line Supervision Mode - Incoming.
INT oPstnRbsTabSuprModeOut	1.3.6.1.4.1.5.1.1.69.5.1.3	INTEGER	read-write	PSTN RBS Line Supervision Mode - Outgoing.
INT oPstnRbsTabWesdDetect	1.3.6.1.4.1.5.1.1.69.5.1.11	INTEGER	read-write	PSTN RBS Table Wesd Detect.
INT oPstnRbsTabWoddDuration	1.3.6.1.4.1.5.1.1.69.5.1.9	INTEGER	read-write	PSTN RBS Table Wodd Duration.
INT oPstnRbsTabWsddDetect	1.3.6.1.4.1.5.1.1.69.5.1.10	INTEGER	read-write	PSTN RBS Table Wsdd Detect.
CTR oPstnStatCallsAccepted	1.3.6.1.4.1.5.1.1.69.2.1.5	Counter	read-only	PSTN Statistics - Calls Accepted.
CTR oPstnStatCallsCleared	1.3.6.1.4.1.5.1.1.69.2.1.7	Counter	read-only	PSTN Statistics - Calls Cleared.
CTR oPstnStatCallsCompleted	1.3.6.1.4.1.5.1.1.69.2.1.6	Counter	read-only	PSTN Statistics - Calls Completed.
CTR oPstnStatCallsOfferred	1.3.6.1.4.1.5.1.1.69.2.1.3	Counter	read-only	PSTN Statistics - Calls Offered.
CTR oPstnStatCallsOriginated	1.3.6.1.4.1.5.1.1.69.2.1.2	Counter	read-only	PSTN Statistics - Calls Originated.
CTR oPstnStatCallsRouted	1.3.6.1.4.1.5.1.1.69.2.1.4	Counter	read-only	PSTN Statistics - Calls Routed.
INT oPstnStatDslIndex	1.3.6.1.4.1.5.1.1.69.2.1.1	INTEGER	read-only	PSTN Statistics Dsl Index.
INT oPstnSubTabAdminStatus	1.3.6.1.4.1.5.1.1.69.1.1.4	INTEGER	read-write	Administration status of PSTN.
INT oPstnSubTabDslIndex	1.3.6.1.4.1.5.1.1.69.1.1.1	INTEGER	read-only	PSTN Subscriber Table Index.
INT oPstnSubTabLastCause	1.3.6.1.4.1.5.1.1.69.1.1.7	INTEGER	read-only	PSTN subscriber table - last cause.
INT oPstnSubTabMsgLevel	1.3.6.1.4.1.5.1.1.69.1.1.6	INTEGER	read-write	PSTN Message level.
INT oPstnSubTabNumberGroup	1.3.6.1.4.1.5.1.1.69.1.1.8	INTEGER	read-write	PSTN Subscriber table - number group.
INT oPstnSubTabNumChannels	1.3.6.1.4.1.5.1.1.69.1.1.3	INTEGER	read-write	PSTN subscriber table - number of channels.
INT oPstnSubTabOperStatus	1.3.6.1.4.1.5.1.1.69.1.1.5	INTEGER	read-only	Operational status of PSTN.
INT oPstnSubTabSigSystem	1.3.6.1.4.1.5.1.1.69.1.1.2	INTEGER	read-write	PSTN signaling system. Either RBS, P7 or R2.

RFC description

ACC PSTN subscriber configuration and management for public switched telephone network interfaces.

Start monitoring ACC/Ericsson WAN access routers (legacy) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download ACC-PSTN

What Is ACC-PSTN?

Supported Devices

Monitoring Examples

What Can Be Monitored

This MIB depends on

Related MIBs

RFC description