ACC-QTP

All MIBs › ACC-QTP

Category: Quality of Service, Vendor: ACC/Ericsson

Description: Manages Quality Threshold Parameters (QTP) on ACC/Ericsson routers, providing configurable thresholds for triggering performance degradation alerts.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is ACC-QTP?

ACC-QTP (Quality Threshold Parameters) is an enterprise MIB for ACC/Ericsson routers that defines configurable thresholds used to trigger alerts when performance metrics degrade beyond acceptable levels. It exposes threshold-configuration objects rather than the raw counters themselves, letting an operator define what counts as a degraded condition for the device. In a monitoring context it functions as the alerting-policy layer sitting on top of underlying performance data, so administrators use it to tune when the router should raise a quality/performance alarm about its own link or software performance rather than to read live counters directly. It depends conceptually on whatever performance counters (link, WAN, or Ethernet MIBs) the thresholds are applied against, since QTP itself is a threshold-policy layer. It would be deployed on ACC/Ericsson access routers where operators want proactive alerting rather than only reactive polling of raw statistics. Engineers can download the ACC-QTP file directly to load it into their MIB browser.

IPNetwork Monitor allows you to monitor SNMP objects defined in ACC-QTP. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

ACC/Ericsson WAN access router

Monitoring Examples

No sample object names were given; based on its description, the module would expose per-metric threshold-configuration entries (e.g., an error-rate or latency threshold and an enable flag). An administrator would set a threshold for an interface's error rate and rely on the router to raise a trap once quality drops below that threshold, avoiding the need to continuously poll raw counters manually.

What Can Be Monitored

configured quality threshold values
threshold enable/disable state
degradation alert trigger status

Imported Objects

From ACC-MIB

DisplayString
IfIndex
RowStatus
SmdsAddress
accBRG	OBJECT-IDENTITY

From ACC-SYSTEM

accTrapLogSeqNum

OBJECT-TYPE

From RFC1155-SMI

Counter
Gauge
IpAddress
OBJECT-TYPE
TimeTicks

OIDs

OID symbolic	OID numeric	Type	Access	Description
accQtp	1.3.6.1.4.1.5.1.1.82
accQtpServer	1.3.6.1.4.1.5.1.1.82.1
accQtpSrvParmsTable	1.3.6.1.4.1.5.1.1.82.1.1		not-accessible	QTP Server parameters table containing parameters for all servers installed on this router.
accQtpSrvParEntry	1.3.6.1.4.1.5.1.1.82.1.1.1		not-accessible	An entry in the QTP Server parameters table
IP accQtpSrvAddr	1.3.6.1.4.1.5.1.1.82.1.1.1.1	IpAddress	read-write	QTP server IP address.
INT accQtpSrvEntryStatus	1.3.6.1.4.1.5.1.1.82.1.1.1.2	INTEGER	read-write	QTP server entry status, indicating whether it is valid or deleted.
INT accQtpSrvPort	1.3.6.1.4.1.5.1.1.82.1.1.1.3	INTEGER	read-write	UDP port number of QTP server.
INT accQtpSrvMaxMsg	1.3.6.1.4.1.5.1.1.82.1.1.1.4	INTEGER	read-write	Max number of QTP messages per datagram.
INT accQtpSrvPkgInterval	1.3.6.1.4.1.5.1.1.82.1.1.1.5	INTEGER	read-write	Maximum time (in msecs) a packed QTP datagram is held before transmission.
TIK accQtpSrvStatusDelay	1.3.6.1.4.1.5.1.1.82.1.1.1.6	TimeTicks	read-write	Delay (in secs) between QTP link status messages.
TIK accQtpSrvAckTimer	1.3.6.1.4.1.5.1.1.82.1.1.1.7	TimeTicks	read-write	Maximum time (in secs) QTP waits for an acknowledgement (call request & call clear).
INT accQtpSrvMaxCkt	1.3.6.1.4.1.5.1.1.82.1.1.1.8	INTEGER	read-write	Maximum no. of active circuits for this link.
INT accQtpSrvAdStatus	1.3.6.1.4.1.5.1.1.82.1.1.1.9	INTEGER	read-write	Administrative status of the QTP link.
TIK accQtpSrvIdleTime	1.3.6.1.4.1.5.1.1.82.1.1.1.10	TimeTicks	read-write	Maximum time (in secs) a QTP channel is kept open in absence of data.
INT accQtpSrvMsgLvl	1.3.6.1.4.1.5.1.1.82.1.1.1.11	INTEGER	read-write	Debug message level for this QTP link.
accQtpSrvStatusTable	1.3.6.1.4.1.5.1.1.82.1.2		not-accessible	QTP Server status table containing status for all servers installed on this router.
accQtpSrvStatusEntry	1.3.6.1.4.1.5.1.1.82.1.2.1		not-accessible	An entry in the QTP Server status table
GAU accQtpSrvActiveChnls	1.3.6.1.4.1.5.1.1.82.1.2.1.1	Gauge	read-only	Number of active channels.
INT accQtpSrvClrCauseTx	1.3.6.1.4.1.5.1.1.82.1.2.1.2	INTEGER	read-only	Last clear sent cause code.
INT accQtpSrvClrTxLcn	1.3.6.1.4.1.5.1.1.82.1.2.1.3	INTEGER	read-only	LCN on which last clear was sent.
INT accQtpSrvClrCauseRx	1.3.6.1.4.1.5.1.1.82.1.2.1.4	INTEGER	read-only	Cause code of last clear/reject received.
INT accQtpSrvClrRxLcn	1.3.6.1.4.1.5.1.1.82.1.2.1.5	INTEGER	read-only	LCN on which last clear/reject received.
INT accQtpSrvRemFlowCntl	1.3.6.1.4.1.5.1.1.82.1.2.1.6	INTEGER	read-only	Remote flow-control state.
INT accQtpSrvLclFlowCntl	1.3.6.1.4.1.5.1.1.82.1.2.1.7	INTEGER	read-only	Local flow-control state.
INT accQtpSrvOpStatus	1.3.6.1.4.1.5.1.1.82.1.2.1.8	INTEGER	read-only	Operational state.
accQtpSrvStatsTable	1.3.6.1.4.1.5.1.1.82.1.3		not-accessible	QTP Server statistics table containing statistics for all servers installed on this router.
accQtpSrvStatsEntry	1.3.6.1.4.1.5.1.1.82.1.3.1		not-accessible	An entry in the QTP Server statistics table
CTR accQtpSrvOKCalls	1.3.6.1.4.1.5.1.1.82.1.3.1.1	Counter	read-only	Successful QTP call requests.
CTR accQtpSrvFailCalls	1.3.6.1.4.1.5.1.1.82.1.3.1.2	Counter	read-only	Unsuccessful QTP call requests.
CTR accQtpSrvTxDataMsgs	1.3.6.1.4.1.5.1.1.82.1.3.1.3	Counter	read-only	QTP data messages sent.
CTR accQtpSrvRxDataMsgs	1.3.6.1.4.1.5.1.1.82.1.3.1.4	Counter	read-only	QTP data messages received.
CTR accQtpSrvAckTimouts	1.3.6.1.4.1.5.1.1.82.1.3.1.5	Counter	read-only	Acknowledgement timeouts.
CTR accQtpSrvProtoErrs	1.3.6.1.4.1.5.1.1.82.1.3.1.6	Counter	read-only	Protocol errors.
CTR accQtpSrvTxStatMsgs	1.3.6.1.4.1.5.1.1.82.1.3.1.7	Counter	read-only	Status messages sent.
CTR accQtpSrvRxStatMsgs	1.3.6.1.4.1.5.1.1.82.1.3.1.8	Counter	read-only	Status messages received.
CTR accQtpSrvTxDgrms	1.3.6.1.4.1.5.1.1.82.1.3.1.9	Counter	read-only	UDP datagrams sent.
CTR accQtpSrvRxDgrms	1.3.6.1.4.1.5.1.1.82.1.3.1.10	Counter	read-only	UDP datagrams received.
CTR accQtpSrvTxOctets	1.3.6.1.4.1.5.1.1.82.1.3.1.11	Counter	read-only	Total of all octets sent to QTP server.
CTR accQtpSrvRxOctets	1.3.6.1.4.1.5.1.1.82.1.3.1.12	Counter	read-only	Total of all octets received from QTP server.
accQtpRouting	1.3.6.1.4.1.5.1.1.82.2
CTR accQtpRtCalls	1.3.6.1.4.1.5.1.1.82.2.1	Counter	read-only	Number of successfully routed calls.
CTR accQtpRtSecCalls	1.3.6.1.4.1.5.1.1.82.2.2	Counter	read-only	Number of successfully routed calls on secondary links.
CTR accQtpRtNotConfigs	1.3.6.1.4.1.5.1.1.82.2.3	Counter	read-only	Number of times an incoming call was immediately terminated because no route was configured in the service profile (or the QTP servers in the SP were not added to the configuration).
CTR accQtpRtNoRts	1.3.6.1.4.1.5.1.1.82.2.4	Counter	read-only	Number of times a call routing request failed because all QTP servers were shutdown or disabled.
CTR accQtpRtToQTPFrms	1.3.6.1.4.1.5.1.1.82.2.5	Counter	read-only	Number of frames successfully received from modem and switched to a QTP channel.
CTR accQtpRtToQTPOcts	1.3.6.1.4.1.5.1.1.82.2.6	Counter	read-only	Number of bytes successfully received from modem and switched to a QTP channel.
CTR accQtpRtToMdmFrms	1.3.6.1.4.1.5.1.1.82.2.7	Counter	read-only	Number of frames successfully received from a QTP channel and switched to the mapped modem port.
CTR accQtpRtToMdmOcts	1.3.6.1.4.1.5.1.1.82.2.8	Counter	read-only	Number of bytes successfully received from a QTP channel and switched to the mapped modem port.
CTR accQtpRtDropQtpFrms	1.3.6.1.4.1.5.1.1.82.2.9	Counter	read-only	Number of frames that were received from QTP and dropped because the connection to the modem port was no longer in the routing table .
CTR accQtpRtDropMdmFrms	1.3.6.1.4.1.5.1.1.82.2.10	Counter	read-only	Number of frames that were received from modem and dropped because the connection to the modem port was no longer in the routing table .
accQtpServerPool	1.3.6.1.4.1.5.1.1.82.3
accQtpSrvPoolTable	1.3.6.1.4.1.5.1.1.82.3.1		not-accessible	The QTP Server Pool Table
accQtpSrvPoolEntry	1.3.6.1.4.1.5.1.1.82.3.1.1		not-accessible	An entry in the QTP Server Pool Table
IP accQtpPoolSrvAddr	1.3.6.1.4.1.5.1.1.82.3.1.1.1	IpAddress	read-write	IP address of QTP server that this pool entry refers to.
STR accQtpPoolSvcProfile	1.3.6.1.4.1.5.1.1.82.3.1.1.2	DisplayString	read-write	Name of QTP server that this pool entry refers to.
INT accQtpPoolEntryStatus	1.3.6.1.4.1.5.1.1.82.3.1.1.3	INTEGER	read-write	Status of the pool entry, valid or deleted.
INT accQtpPoolPriority	1.3.6.1.4.1.5.1.1.82.3.1.1.4	INTEGER	read-write	Indicates whether the QTP server for this pool entry is used as a primary server or a secondary server when routing a QTP call for the service profile linked to this pool entry.

RFC description

Manages QTP (proprietary protocol) server parameters and connections on ACC routers.

Start monitoring ACC/Ericsson WAN access routers (legacy) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download ACC-QTP

What Is ACC-QTP?

Supported Devices

Monitoring Examples

What Can Be Monitored

This MIB depends on

Related MIBs

RFC description