34 modules from Broadband Access
Broadband Access's MIBs in this database all belong to one legacy cable-industry platform, the Broadband Access Systems (BAS) CMTS chassis, and every module addresses its data by the same chassis/slot/interface/logical-port coordinate scheme. The set covers DOCSIS cable-modem provisioning and class-of-service, CMTS chassis/cluster redundancy and failover, IP routing (OSPF, RIP, IP forwarding), SONET transport line status, DHCP relay, TCP stack health, and internal diagnostics/trace and trap modules for the platform's own manager-card software. Come to this page if you're supporting a legacy BAS CMTS headend and need vendor-specific objects for cable-modem provisioning, chassis clustering, or SONET uplink health that standard DOCSIS MIBs don't cover. Because the whole module set is really one platform's internals broken into per-subsystem files, expect heavy overlap and cross-dependency between modules (e.g. BAS-CHASSIS-MIB, BAS-CLUSTER-MIB, BAS-MIB) rather than independent, self-contained MIBs.
| Module | Description |
|---|---|
| BAS-ACCESS-MIB | Manages subscriber access configuration on Broadband Access Systems (BAS) CMTS, including authentication and service profiles. |
| BAS-ALIAS-CABLE-DEVICE-MIB | Provides cable device alias and DOCSIS cable modem configuration objects for the BAS CMTS platform. |
| BAS-ALIAS-CMTS-CONFIG-MIB | Defines alias configuration objects for BAS CMTS upstream and downstream channel settings. |
| BAS-ALIAS-DOCS-IF-MIB | Provides DOCSIS interface alias mapping objects for BAS CMTS to extend standard DOCS-IF-MIB entries. |
| BAS-ALIAS-IP-MIB | Manages IP address alias configuration and routing objects on the Broadband Access Systems CMTS platform. |
| BAS-ALIAS-SNMP-MIB | Defines SNMP alias and community configuration objects for BAS CMTS access control. |
| BAS-ANALYZER-MIB | Provides packet analyzer and traffic capture configuration and statistics for the BAS CMTS platform. |
| BAS-CARD-INFO-MIB | Reports line card inventory, firmware versions, and hardware status for the BAS CMTS chassis. |
| BAS-CHASSIS-MIB | Manages BAS CMTS chassis hardware, including slot assignments, power supplies, and chassis-level alarms. |
| BAS-CLUSTER-MIB | Handles cluster configuration and failover status for BAS CMTS systems deployed in redundant pairs. |
| BAS-CM-CONFIG-MIB | Manages DOCSIS cable modem configuration file parameters and provisioning settings on BAS CMTS. |
| BAS-CMTS-CONFIG-MIB | Provides BAS CMTS-specific configuration objects for upstream/downstream channels and RF plant parameters. |
| BAS-DHCP-RELAY-MIB | Manages DHCP relay agent configuration and forwarding statistics on the BAS broadband access platform. |
| BAS-EVENT-MIB | Defines event logging and notification objects for BAS CMTS system events and alarms. |
| BAS-FTD-MIB | Manages fault-tolerant design (FTD) failover configuration and switchover events on BAS CMTS systems. |
| BAS-HACKED-MIB | Provides diagnostic and override objects used for internal testing on BAS CMTS platforms. |
| BAS-IF-MIB | Manages network interface configuration and statistics specific to the BAS broadband access platform. |
| BAS-IP-FORWARD-MIB | Provides IP forwarding table and route management objects for the BAS CMTS IP routing plane. |
| BAS-IP-MIB | Covers IP address assignment, ARP table entries, and IP protocol settings on BAS broadband access systems. |
| BAS-MGR-TRACE-MIB | Provides manager process trace and debugging configuration objects for BAS CMTS internal diagnostics. |
| BAS-MIB | Defines the root OID hierarchy and common objects for Broadband Access Systems (BAS) CMTS MIB modules. |
| BAS-OSPF-MIB | Manages OSPF routing protocol configuration and link-state database on BAS broadband access platforms. |
| BAS-PBRF-OSPF-MIB | Manages policy-based routing with OSPF (PBRF-OSPF) configuration on BAS CMTS platforms. |
| BAS-PBRF-RIP-MIB | Manages policy-based routing with RIP (PBRF-RIP) configuration and statistics on BAS CMTS. |
| BAS-PROV-MIB | Manages provisioning configuration for subscriber services on the BAS broadband access platform. |
| BAS-RBP-MIB | Manages Route Branch Protocol (RBP) configuration and adjacency state on BAS CMTS systems. |
| BAS-RIPv2-MIB | Manages RIPv2 routing protocol configuration, authentication, and route statistics on BAS CMTS. |
| BAS-SONET-MIB | Monitors SONET/SDH physical layer interface status and performance counters on BAS broadband platforms. |
| BAS-TCP-MIB | Monitors TCP connection statistics and session table on the BAS CMTS management plane. |
| BAS-TG-MIB | Manages trunk group configuration and load distribution across physical links on BAS CMTS. |
| BAS-TOPOLOGY-MIB | Provides network topology discovery and adjacency mapping objects for BAS CMTS platforms. |
| BAS-TRACE-MIB | Provides packet trace and flow capture configuration for diagnostic use on BAS broadband access systems. |
| BAS-TRAPS-MIB | Defines SNMP trap notifications for BAS CMTS system events, including hardware failures and service alerts. |
| BAS-UDP-MIB | Monitors UDP datagram statistics and listener table on the BAS CMTS management plane. |