Nortel-MsCarrier-MscPassport-AtmPnniMIB

All MIBs › Nortel-MsCarrier-MscPassport-AtmPnniMIB

Category: ATM Networking, Nortel MsCarrier MscPassport

Description: Provides SNMP management objects for ATM PNNI routing protocol on Nortel MsCarrier MscPassport switches.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is Nortel-MsCarrier-MscPassport-AtmPnniMIB?

Nortel-MsCarrier-MscPassport-AtmPnniMIB is a Nortel Networks MIB for the MainStreet/MsCarrier Passport family of carrier-grade ATM switches, providing management objects for the PNNI (Private Network-to-Network Interface) ATM routing protocol. It belongs to Nortel's Passport switching platform used in carrier and large enterprise ATM backbones. Its monitoring focus is on protocol/software configuration status rather than physical hardware: the mscAtmIfVptPnniRowStatusTable and mscAtmIfVptPnniProvTable expose the administrative row status and provisioning parameters (such as soft-PVC retry period and hold-off time) of PNNI components on each virtual path trunk, letting an operator confirm PNNI signaling is correctly provisioned and active on each interface. It builds on the ATM Forum's PNNI routing specification as its underlying protocol standard. It is deployed by carriers and large enterprises operating Nortel Passport ATM switches in a PNNI-routed ATM backbone. Engineers can download the Nortel-MsCarrier-MscPassport-AtmPnniMIB file directly to load it into their MIB browser.

IPNetwork Monitor allows you to monitor SNMP objects defined in Nortel-MsCarrier-MscPassport-AtmPnniMIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

Nortel MsCarrier/MainStreet Passport ATM switches

Monitoring Examples

An administrator would check mscAtmIfVptPnniRowStatus in the mscAtmIfVptPnniRowStatusTable to confirm a PNNI component on a given virtual path trunk is active, then review mscAtmIfVptPnniSoftPvcRetryPeriod and mscAtmIfVptPnniSoftPvpAndPvcHoldOffTime in the provisioning table to verify soft-PVC recovery timing after a link flap. An unexpectedly long hold-off time combined with repeated soft-PVC retries would indicate an unstable PNNI adjacency between switches.

What Can Be Monitored

PNNI component row status
PNNI provisioning parameters
soft-PVC retry period
soft-PVC/PVP hold-off time

Imported Objects

From Nortel-MsCarrier-MscPassport-AtmCoreMIB

mscAtmIf	OBJECT-IDENTITY
mscAtmIfIndex	OBJECT-TYPE
mscAtmIfVpt	OBJECT-IDENTITY
mscAtmIfVptIndex	OBJECT-TYPE

From Nortel-MsCarrier-MscPassport-StandardTextualConventionsMIB

Counter32
DisplayString
Gauge32
Integer32
RowStatus
StorageType
Unsigned32

From Nortel-MsCarrier-MscPassport-TextualConventionsMIB

AsciiStringIndex
FixedPoint1
Hex
HexString
NonReplicated

From Nortel-MsCarrier-MscPassport-UsefulDefinitionsMIB

mscPassportMIBs

OBJECT-IDENTITY

From RFC-1212

OBJECT-TYPE

OIDs

OID symbolic	OID numeric	Type	Access	Description
mscAtmIfVptPnni	1.3.6.1.4.1.562.36.2.1.114.9.7
mscAtmIfVptPnniRowStatusTable	1.3.6.1.4.1.562.36.2.1.114.9.7.1		not-accessible	This entry controls the addition and deletion of mscAtmIfVptPnni components.
mscAtmIfVptPnniRowStatusEntry	1.3.6.1.4.1.562.36.2.1.114.9.7.1.1		not-accessible	A single entry in the table represents a single mscAtmIfVptPnni component.
ROW mscAtmIfVptPnniRowStatus	1.3.6.1.4.1.562.36.2.1.114.9.7.1.1.1	RowStatus	read-write	This variable is used as the basis for SNMP naming of mscAtmIfVptPnni components. These components can be added and deleted.
STR mscAtmIfVptPnniComponentName	1.3.6.1.4.1.562.36.2.1.114.9.7.1.1.2	DisplayString	read-only	This variable provides the component's string name for use with the ASCII Console Interface
STO mscAtmIfVptPnniStorageType	1.3.6.1.4.1.562.36.2.1.114.9.7.1.1.4	StorageType	read-only	This variable represents the storage type value for the mscAtmIfVptPnni tables.
NON mscAtmIfVptPnniIndex	1.3.6.1.4.1.562.36.2.1.114.9.7.1.1.10	NonReplicated	not-accessible	This variable represents the index for the mscAtmIfVptPnni tables.
mscAtmIfVptPnniSig	1.3.6.1.4.1.562.36.2.1.114.9.7.2
mscAtmIfVptPnniSigRowStatusTable	1.3.6.1.4.1.562.36.2.1.114.9.7.2.1		not-accessible	This entry controls the addition and deletion of mscAtmIfVptPnniSig components.
mscAtmIfVptPnniSigRowStatusEntry	1.3.6.1.4.1.562.36.2.1.114.9.7.2.1.1		not-accessible	A single entry in the table represents a single mscAtmIfVptPnniSig component.
ROW mscAtmIfVptPnniSigRowStatus	1.3.6.1.4.1.562.36.2.1.114.9.7.2.1.1.1	RowStatus	read-only	This variable is used as the basis for SNMP naming of mscAtmIfVptPnniSig components. These components cannot be added nor deleted.
STR mscAtmIfVptPnniSigComponentName	1.3.6.1.4.1.562.36.2.1.114.9.7.2.1.1.2	DisplayString	read-only	This variable provides the component's string name for use with the ASCII Console Interface
STO mscAtmIfVptPnniSigStorageType	1.3.6.1.4.1.562.36.2.1.114.9.7.2.1.1.4	StorageType	read-only	This variable represents the storage type value for the mscAtmIfVptPnniSig tables.
NON mscAtmIfVptPnniSigIndex	1.3.6.1.4.1.562.36.2.1.114.9.7.2.1.1.10	NonReplicated	not-accessible	This variable represents the index for the mscAtmIfVptPnniSig tables.
mscAtmIfVptPnniSigVcd	1.3.6.1.4.1.562.36.2.1.114.9.7.2.2
mscAtmIfVptPnniSigVcdRowStatusTable	1.3.6.1.4.1.562.36.2.1.114.9.7.2.2.1		not-accessible	This entry controls the addition and deletion of mscAtmIfVptPnniSigVcd components.
mscAtmIfVptPnniSigVcdRowStatusEntry	1.3.6.1.4.1.562.36.2.1.114.9.7.2.2.1.1		not-accessible	A single entry in the table represents a single mscAtmIfVptPnniSigVcd component.
ROW mscAtmIfVptPnniSigVcdRowStatus	1.3.6.1.4.1.562.36.2.1.114.9.7.2.2.1.1.1	RowStatus	read-write	This variable is used as the basis for SNMP naming of mscAtmIfVptPnniSigVcd components. These components can be added and deleted.
STR mscAtmIfVptPnniSigVcdComponentName	1.3.6.1.4.1.562.36.2.1.114.9.7.2.2.1.1.2	DisplayString	read-only	This variable provides the component's string name for use with the ASCII Console Interface
STO mscAtmIfVptPnniSigVcdStorageType	1.3.6.1.4.1.562.36.2.1.114.9.7.2.2.1.1.4	StorageType	read-only	This variable represents the storage type value for the mscAtmIfVptPnniSigVcd tables.
NON mscAtmIfVptPnniSigVcdIndex	1.3.6.1.4.1.562.36.2.1.114.9.7.2.2.1.1.10	NonReplicated	not-accessible	This variable represents the index for the mscAtmIfVptPnniSigVcd tables.
mscAtmIfVptPnniSigVcdProvTable	1.3.6.1.4.1.562.36.2.1.114.9.7.2.2.10		not-accessible	This group contains the provisionable traffic attributes for a control channel.
mscAtmIfVptPnniSigVcdProvEntry	1.3.6.1.4.1.562.36.2.1.114.9.7.2.2.10.1		not-accessible	An entry in the mscAtmIfVptPnniSigVcdProvTable.
INT mscAtmIfVptPnniSigVcdTrafficDescType	1.3.6.1.4.1.562.36.2.1.114.9.7.2.2.10.1.1	INTEGER	read-write	This attribute specifies the type of traffic management which is applied to both the transmit and receive direction of this connection as defined in the ATM Forum. The trafficDescType determines the number and meaning of the parameters in the trafficDescParm attribute.
INT mscAtmIfVptPnniSigVcdAtmServiceCategory	1.3.6.1.4.1.562.36.2.1.114.9.7.2.2.10.1.3	INTEGER	read-write	This attribute specifies the ATM service category for both directions of the connection. The constantBitRate service category is intended for real time applications, that is those requiring tightly constrained delay and delay variation, as would be appropriate for voice and video applications. The consistent availability of a fixed quantity of bandwidth is considered appropriate for CBR service. Cells which are delayed beyond the value specified by CellTransfer Delay are assumed to be of significantly reduce value to the application. The rtVariableBitRate service category is intended for real time applications, that is those requiring tightly constrained delay and delay variation, as would be appropriate for voice and video applications. Sources are expected to transmit at a rate which varies with time. Equivalently, the source can be described as 'bursty'. Cells which are delayed beyond the value specified by CTD are assumed to be of significantly reduced value to the application. Real time VBR service may support statistical multiplexing of real time sources. The nrtVariableBitRate service category is intended for non-real time applications which have bursty traffic characteristics and which can be characterized in terms of a PCR, SCR, and MBS. For those cells which are transferred within the traffic contract, the application expects a low cell loss ratio. For all connections, it expects a bound on the mean cell transfer delay. Non-real time VBR service may support statistical multiplexing of connections. The unspecifiedBitRate service is intended for non-real time applications; that is, those not requiring tightly constrained delay and delay variation. UBR sources are expected to be bursty. UBR service supports a high degree of statistical multiplexing among sources. UBR service does not specify traffic related service guarantees. No numerical commitments are made with respect to the cell loss ratio experienced by a UBR connection, or as to the cell transfer delay experienced by cells on the connection.
U32 mscAtmIfVptPnniSigVcdWeight	1.3.6.1.4.1.562.36.2.1.114.9.7.2.2.10.1.4	Unsigned32	read-write	This attribute specifies an override for the weight of this unshaped connection. This attribute is ignored for shaped connections, for ABR connections, for connections on a CQC-based ATM FP and basic VPTs. When the value is set to sameAsCa, the weight is determined by the weight policy attribute under the CA service category component for all but standard VPT VCCs. For standard VPT VCCs, the weight is determined by the VCC's service category, when the value is set to sameAsCa. When this attribute is set to a value from 1 to 4095, that value is used for the weight policy of this connection relative to other connections. For all but standard VPT VCCs, weight policy determines the proportion of transit cell opportunities which are allocated to this connection, compared to other connections in the same service category. For standard VPT VCCs, weight policy determines the proportion of transmit cell opportunities which are allocated to this connection, compared to other connections associated with the VPT. When the value is set to upToQueueLimit, the weight policy is limited only by the txQueueLimit. VALUES ( 0 = upToQueueLimit 65535 = sameAsCa )
INT mscAtmIfVptPnniSigVcdQosClass	1.3.6.1.4.1.562.36.2.1.114.9.7.2.2.10.1.21	INTEGER	read-write	This attribute specifies the quality of service for both the forward and backward direction for this connection. Class 1 supports a QOS that meets Service Class A performance requirements (Circuit emulation, constant bit rate video). Class 2 supports a QOS that meets Service Class B performance requirements (Variable bit rate audio and video). Class 3 supports a QOS that meets Service Class C performance requirements (Connection-Oriented Data Transfer). Class 4 supports a QOS that meets Service Class D performance requirements (Connectionless Data Transfer). Class 0 is the unspecified bit rate QOS class; no objective is specified for the performance parameters.
INT mscAtmIfVptPnniSigVcdTrafficShaping	1.3.6.1.4.1.562.36.2.1.114.9.7.2.2.10.1.50	INTEGER	read-write	This attribute specifies whether this connection uses traffic shaping when transmitting traffic to the ATM interface. When sameAsCa is selected, traffic shaping for this connection is based on the trafficShaping attribute of the connection's service category component under the AtmIf CA. If the service category has traffic shaping enabled, then traffic shaping is enabled for the connection. Note that enabling traffic shaping may have no effect under certain cases. These cases are listed in the description of the trafficShaping operational attribute, which is under the Vcc Tm and Vpc Tm components. When disabled is selected, traffic shaping for this connection is disabled.
INT mscAtmIfVptPnniSigVcdUnshapedTransmitQueueing	1.3.6.1.4.1.562.36.2.1.114.9.7.2.2.10.1.60	INTEGER	read-write	This attribute only applies when this connection is unshaped. This attribute specifies the transmit queueing method for this connection if it is unshaped. Refer to the unshapedTransmitQueueing attribute under the AtmIf CA service category subcomponent for more details on the meaning of this attribute. When this attribute is set to sameAsCa, the transmit queueing method for the connection is based on the unshapedTransmitQueueing attribute of the connection's service category component under the ConnectionAdministrator. When this attribute is set to common, transmit traffic on this unshaped connection is destined for the common queue. The value sameAsInterface is for migration from previous software releases, but should no longer be used
INT mscAtmIfVptPnniSigVcdUsageParameterControl	1.3.6.1.4.1.562.36.2.1.114.9.7.2.2.10.1.70	INTEGER	read-write	This attribute specifies whether this connection enforces usage parameter control when receiving traffic from the ATM interface. When sameAsCa is selected, UPC for the connection is based on the usageParameterControl attribute of the connection's service category component under the ConnectionAdministrator. If the service category has UPC enabled, then UPC is enabled for the connection. Note that enabling UPC may have no effect under certain cases. These cases are listed in the description of the usageParameterControl operational attribute, which is under the Vcc Tm or Vpc Tm component. When disabled is selected, UPC for this connection is disabled. The value sameAsInterface is for migration from previous software releases, but should no longer be used
mscAtmIfVptPnniSigVcdTdpTable	1.3.6.1.4.1.562.36.2.1.114.9.7.2.2.387		not-accessible	This attribute is a vector of five traffic parameters whose meanings are defined by the trafficDescType attribute. The values of peak cell rate (PCR), sustained cell rate (SCR) and requested shaping rate are expressed in cell/s. Maximum burst size (MBS) is expressed in cells. CDVT is expressed in microseconds. The values of PCR, SCR, MBS and CDVT are used for connection admission control (CAC). The value of CDVT is only used for connections where the atmServiceCategory is constantBitRate. For all other values of atmServiceCategory, CDVT is ignored. The values of PCR, SCR and requested shaping rate are used to determine the actual shaping rate where traffic shaping is enabled. When trafficDescType is 3, parameter 1 represents the PCR for CLP equal to 0 and 1 traffic; parameter 4 represents the CDVT; and parameter 5 represents the requested shaping rate. A non-zero value in parameter 5 overrides any value in parameter 1. This result is used as the PCR. Parameter 1 must be non-zero. Parameters 2 and 3 must be zero. When trafficDescType is 6, parameter 1 represents the PCR for CLP equal to 0 and 1 traffic; parameter 2 represents the SCR for CLP equal to 0 and 1 traffic; parameter 3 represents the MBS for CLP equal to 0 and 1 traffic; parameter 4 represents the CDVT; and parameter 5 represents the requested shaping rate. A non-zero value in parameter 5 overrides any value in parameter 1. This result is used as the PCR. Parameters 1, 2, and 3 must be non-zero. Parameter 1 must be greater than or equal to parameter 2. Parameter 5 must either be zero (unused) or greater than or equal to parameter 2. When trafficDescType is 7, parameter 1 represents the PCR for CLP equal to 0 and 1 traffic; parameter 2 represents the SCR for CLP equal to 0 with cell discard; parameter 3 represents the MBS for CLP equal to 0 traffic; parameter 4 represents the CDVT; and parameter 5 represents the requested shaping rate. A non-zero value in parameter 5 overrides any value in parameter 1. This result is used as the PCR. Parameters 1, 2, and 3 must be non-zero. Parameter 1 must be greater than or equal to parameter 2. Parameter 5 must either be zero (unused) or greater than or equal to parameter 2. When trafficDescType is 8, parameter 1 represents the PCR for CLP equal to 0 and 1 traffic; parameter 2 represents the SCR for CLP equal to 0 traffic with cell tagging; parameter 3 represents the MBS for CLP equal to 0 traffic; parameter 4 represents the CDVT; and parameter 5 represents the requested shaping rate. A non-zero value in parameter 5 overrides any value in parameter 1. This result is used as the PCR. Parameters 1, 2, and 3 must be non-zero. Parameter 1 must be greater than or equal to parameter 2. Parameter 5 must either be zero (unused) or greater than or equal to parameter 2. Whenever it is valid for PCR to be specified, parameter 5 may also be used to specify a requested shaping rate. A non-zero value in parameter 5 overrides the value in parameter 1 and is used as the peak cell rate in calculations of CAC and shaping rate. For trafficDescType 3 the traffic is shaped at the next rate less than the PCR. For trafficDescType 6, 7, and 8, the traffic is shaped at the highest available rate which is between PCR and SCR. However, if there is no available shaping rate between PCR and SCR, traffic is shaped at the next rate above the PCR.
mscAtmIfVptPnniSigVcdTdpEntry	1.3.6.1.4.1.562.36.2.1.114.9.7.2.2.387.1		not-accessible	An entry in the mscAtmIfVptPnniSigVcdTdpTable.
I32 mscAtmIfVptPnniSigVcdTdpIndex	1.3.6.1.4.1.562.36.2.1.114.9.7.2.2.387.1.1	Integer32	not-accessible	This variable represents the mscAtmIfVptPnniSigVcdTdpTable specific index for the mscAtmIfVptPnniSigVcdTdpTable.
U32 mscAtmIfVptPnniSigVcdTdpValue	1.3.6.1.4.1.562.36.2.1.114.9.7.2.2.387.1.2	Unsigned32	read-write	This variable represents an individual value for the mscAtmIfVptPnniSigVcdTdpTable.
mscAtmIfVptPnniSigProvTable	1.3.6.1.4.1.562.36.2.1.114.9.7.2.10		not-accessible	This attribute group contains the provisionable attributes for the Signalling component.
mscAtmIfVptPnniSigProvEntry	1.3.6.1.4.1.562.36.2.1.114.9.7.2.10.1		not-accessible	An entry in the mscAtmIfVptPnniSigProvTable.
U32 mscAtmIfVptPnniSigVci	1.3.6.1.4.1.562.36.2.1.114.9.7.2.10.1.1	Unsigned32	read-write	This attribute specifies the signalling channel number.
INT mscAtmIfVptPnniSigAddressConversion	1.3.6.1.4.1.562.36.2.1.114.9.7.2.10.1.2	INTEGER	read-write	This attribute specifies the address conversion on the outgoing signalling PDUs. The options are none, nativeE164, or nsap. The none option is the default and if this option is chosen then nothing is done to the address information element (IE) in the outgoing signalling message. If nativeE164 option is chosen, then only NSAP encapsulated E.164 addresses with zeros in the ESI are converted to native E.164 format in the outgoing signalling message. If the NSAP address is not encapsulated E.164 or the ESI field is not zeros and the nativeE164 option is chosen, then the call is cleared. If the nsap option is chosen, then native E.164 addresses are converted to NSAP E.164 with zeros in the ESI field; otherwise the address is in NSAP format and is not changed.
INT mscAtmIfVptPnniSigOperatingMode	1.3.6.1.4.1.562.36.2.1.114.9.7.2.10.1.3	INTEGER	read-write	This attribute specifies the operating mode of the signaling channel. provisionedOnly indicates that only SPVCs and SPVPs are supported on the interface and SVCs are not supported. This value is permitted only on UNI interfaces. normal indicates that SVCs, SPVCs, and SPVPs are supported on the interface.
mscAtmIfVptPnniSigStateTable	1.3.6.1.4.1.562.36.2.1.114.9.7.2.11		not-accessible	This group contains the three OSI State attributes. The descriptions generically indicate what each state attribute implies about the component. Note that not all the values and state combinations described here are supported by every component which uses this group. For component-specific information and the valid state combinations, refer to NTP 241-7001-150, Passport Operations and Maintenance Guide.
mscAtmIfVptPnniSigStateEntry	1.3.6.1.4.1.562.36.2.1.114.9.7.2.11.1		not-accessible	An entry in the mscAtmIfVptPnniSigStateTable.
INT mscAtmIfVptPnniSigAdminState	1.3.6.1.4.1.562.36.2.1.114.9.7.2.11.1.1	INTEGER	read-only	This attribute indicates the OSI Administrative State of the component. The value locked indicates that the component is administratively prohibited from providing services for its users. A Lock or Lock - force command has been previously issued for this component. When the value is locked, the value of usageState must be idle. The value shuttingDown indicates that the component is administratively permitted to provide service to its existing users only. A Lock command was issued against the component and it is in the process of shutting down. The value unlocked indicates that the component is administratively permitted to provide services for its users. To enter this state, issue an Unlock command to this component.
INT mscAtmIfVptPnniSigOperationalState	1.3.6.1.4.1.562.36.2.1.114.9.7.2.11.1.2	INTEGER	read-only	This attribute indicates the OSI Operational State of the component. The value enabled indicates that the component is available for operation. Note that if adminState is locked, it would still not be providing service. The value disabled indicates that the component is not available for operation. For example, something is wrong with the component itself, or with another component on which this one depends. If the value is disabled, the usageState must be idle.
INT mscAtmIfVptPnniSigUsageState	1.3.6.1.4.1.562.36.2.1.114.9.7.2.11.1.3	INTEGER	read-only	This attribute indicates the OSI Usage State of the component. The value idle indicates that the component is not currently in use. The value active indicates that the component is in use and has spare capacity to provide for additional users. The value busy indicates that the component is in use and has no spare operating capacity for additional users at this time.
mscAtmIfVptPnniSigOperTable	1.3.6.1.4.1.562.36.2.1.114.9.7.2.12		not-accessible	This attribute contains the operational attributes for the AtmSignalling component.
mscAtmIfVptPnniSigOperEntry	1.3.6.1.4.1.562.36.2.1.114.9.7.2.12.1		not-accessible	An entry in the mscAtmIfVptPnniSigOperTable.
U32 mscAtmIfVptPnniSigLastTxCauseCode	1.3.6.1.4.1.562.36.2.1.114.9.7.2.12.1.1	Unsigned32	read-only	This attribute indicates the cause code in the last transmitted signalling message that contains the CAUSE information element. The cause code is used to describe the reason for generating certain signalling messages.
HEX mscAtmIfVptPnniSigLastTxDiagCode	1.3.6.1.4.1.562.36.2.1.114.9.7.2.12.1.2	Hex	read-only	This attribute contains the diagnostic code in the last transmitted signalling message. The diagnostic code is contained in the CAUSE information element and identifies an information element type or timer type. The diagnostic code is present only if a procedural error is detected by the signalling protocol. A diagnostic code is always accompanied by the cause code. If there is no failure, this attribute is set to 0.
U32 mscAtmIfVptPnniSigLastRxCauseCode	1.3.6.1.4.1.562.36.2.1.114.9.7.2.12.1.3	Unsigned32	read-only	This attribute contains the cause code in the last received signalling message that contains the CAUSE information element. The cause code is used to describe the reason for generating certain signalling messages.
HEX mscAtmIfVptPnniSigLastRxDiagCode	1.3.6.1.4.1.562.36.2.1.114.9.7.2.12.1.4	Hex	read-only	This attribute contains the diagnostic code in the last received signalling message. The diagnostic code is contained in the CAUSE information element and identifies an information element type or timer type. The diagnostic code is present only if a procedural error is detected by the signalling protocol. A diagnostic code is always accompanied by the cause code. If there is no failure, this attribute is set to 0.
mscAtmIfVptPnniSigStatsTable	1.3.6.1.4.1.562.36.2.1.114.9.7.2.13		not-accessible	This attribute group contains the statistics associated with the AtmSignalling component.
mscAtmIfVptPnniSigStatsEntry	1.3.6.1.4.1.562.36.2.1.114.9.7.2.13.1		not-accessible	An entry in the mscAtmIfVptPnniSigStatsTable.
C32 mscAtmIfVptPnniSigCurrentConnections	1.3.6.1.4.1.562.36.2.1.114.9.7.2.13.1.1	Counter32	read-only	This attribute indicates the total number of currently active connections.
G32 mscAtmIfVptPnniSigPeakConnections	1.3.6.1.4.1.562.36.2.1.114.9.7.2.13.1.2	Gauge32	read-only	This attribute indicates the high water mark of active point-to- point and point-to-multipoint connections.
C32 mscAtmIfVptPnniSigSuccessfulConnections	1.3.6.1.4.1.562.36.2.1.114.9.7.2.13.1.3	Counter32	read-only	This attribute counts the total number of switched point-to- point and point-to-multipoint connections that were successfully established. The counter wraps to 0 when the maximum value is exceeded.
C32 mscAtmIfVptPnniSigFailedConnections	1.3.6.1.4.1.562.36.2.1.114.9.7.2.13.1.4	Counter32	read-only	This attribute counts the total number of switched connections that were not successfully established.The counter wraps to 0 when the maximum value is exceeded.
C32 mscAtmIfVptPnniSigTxPdus	1.3.6.1.4.1.562.36.2.1.114.9.7.2.13.1.5	Counter32	read-only	This attribute counts the number of transmitted signalling PDUs.The counter wraps to 0 when the maximum value is exceeded.
C32 mscAtmIfVptPnniSigRxPdus	1.3.6.1.4.1.562.36.2.1.114.9.7.2.13.1.6	Counter32	read-only	This attribute counts the number of received signalling PDUs.The counter wraps to 0 when the maximum value is exceeded.
G32 mscAtmIfVptPnniSigCurrentPmpConnections	1.3.6.1.4.1.562.36.2.1.114.9.7.2.13.1.7	Gauge32	read-only	This attribute indicates the number of currently active point-to- multipoint connections.
G32 mscAtmIfVptPnniSigPeakPmpConnections	1.3.6.1.4.1.562.36.2.1.114.9.7.2.13.1.8	Gauge32	read-only	This attribute indicates the high water mark of active point-to- multipoint connections.
C32 mscAtmIfVptPnniSigSuccessfulPmpConnections	1.3.6.1.4.1.562.36.2.1.114.9.7.2.13.1.9	Counter32	read-only	This attribute counts the total number of switched point-to- multipoint connections that were successfully established. The counter wraps to 0 when the maximum value is exceeded.
C32 mscAtmIfVptPnniSigFailedPmpConnections	1.3.6.1.4.1.562.36.2.1.114.9.7.2.13.1.10	Counter32	read-only	This attribute counts the number of switched point-to- multipoint connections that were not successfully established.The counter wraps to 0 when the maximum value is exceeded.
G32 mscAtmIfVptPnniSigNewCurrentConnections	1.3.6.1.4.1.562.36.2.1.114.9.7.2.13.1.11	Gauge32	read-only	This attribute indicates the total number of currently active point-to- point and point-to-multipoint connections.
mscAtmIfVptPnniRcc	1.3.6.1.4.1.562.36.2.1.114.9.7.3
mscAtmIfVptPnniRccRowStatusTable	1.3.6.1.4.1.562.36.2.1.114.9.7.3.1		not-accessible	This entry controls the addition and deletion of mscAtmIfVptPnniRcc components.
mscAtmIfVptPnniRccRowStatusEntry	1.3.6.1.4.1.562.36.2.1.114.9.7.3.1.1		not-accessible	A single entry in the table represents a single mscAtmIfVptPnniRcc component.
ROW mscAtmIfVptPnniRccRowStatus	1.3.6.1.4.1.562.36.2.1.114.9.7.3.1.1.1	RowStatus	read-only	This variable is used as the basis for SNMP naming of mscAtmIfVptPnniRcc components. These components cannot be added nor deleted.
STR mscAtmIfVptPnniRccComponentName	1.3.6.1.4.1.562.36.2.1.114.9.7.3.1.1.2	DisplayString	read-only	This variable provides the component's string name for use with the ASCII Console Interface
STO mscAtmIfVptPnniRccStorageType	1.3.6.1.4.1.562.36.2.1.114.9.7.3.1.1.4	StorageType	read-only	This variable represents the storage type value for the mscAtmIfVptPnniRcc tables.
NON mscAtmIfVptPnniRccIndex	1.3.6.1.4.1.562.36.2.1.114.9.7.3.1.1.10	NonReplicated	not-accessible	This variable represents the index for the mscAtmIfVptPnniRcc tables.
mscAtmIfVptPnniRccVcd	1.3.6.1.4.1.562.36.2.1.114.9.7.3.2
mscAtmIfVptPnniRccVcdRowStatusTable	1.3.6.1.4.1.562.36.2.1.114.9.7.3.2.1		not-accessible	This entry controls the addition and deletion of mscAtmIfVptPnniRccVcd components.
mscAtmIfVptPnniRccVcdRowStatusEntry	1.3.6.1.4.1.562.36.2.1.114.9.7.3.2.1.1		not-accessible	A single entry in the table represents a single mscAtmIfVptPnniRccVcd component.
ROW mscAtmIfVptPnniRccVcdRowStatus	1.3.6.1.4.1.562.36.2.1.114.9.7.3.2.1.1.1	RowStatus	read-write	This variable is used as the basis for SNMP naming of mscAtmIfVptPnniRccVcd components. These components can be added and deleted.
STR mscAtmIfVptPnniRccVcdComponentName	1.3.6.1.4.1.562.36.2.1.114.9.7.3.2.1.1.2	DisplayString	read-only	This variable provides the component's string name for use with the ASCII Console Interface
STO mscAtmIfVptPnniRccVcdStorageType	1.3.6.1.4.1.562.36.2.1.114.9.7.3.2.1.1.4	StorageType	read-only	This variable represents the storage type value for the mscAtmIfVptPnniRccVcd tables.
NON mscAtmIfVptPnniRccVcdIndex	1.3.6.1.4.1.562.36.2.1.114.9.7.3.2.1.1.10	NonReplicated	not-accessible	This variable represents the index for the mscAtmIfVptPnniRccVcd tables.
mscAtmIfVptPnniRccVcdProvTable	1.3.6.1.4.1.562.36.2.1.114.9.7.3.2.10		not-accessible	This group contains the provisionable traffic attributes for a control channel.
mscAtmIfVptPnniRccVcdProvEntry	1.3.6.1.4.1.562.36.2.1.114.9.7.3.2.10.1		not-accessible	An entry in the mscAtmIfVptPnniRccVcdProvTable.
INT mscAtmIfVptPnniRccVcdTrafficDescType	1.3.6.1.4.1.562.36.2.1.114.9.7.3.2.10.1.1	INTEGER	read-write	This attribute specifies the type of traffic management which is applied to both the transmit and receive direction of this connection as defined in the ATM Forum. The trafficDescType determines the number and meaning of the parameters in the trafficDescParm attribute.
INT mscAtmIfVptPnniRccVcdAtmServiceCategory	1.3.6.1.4.1.562.36.2.1.114.9.7.3.2.10.1.3	INTEGER	read-write	This attribute specifies the ATM service category for both directions of the connection. The constantBitRate service category is intended for real time applications, that is those requiring tightly constrained delay and delay variation, as would be appropriate for voice and video applications. The consistent availability of a fixed quantity of bandwidth is considered appropriate for CBR service. Cells which are delayed beyond the value specified by CellTransfer Delay are assumed to be of significantly reduce value to the application. The rtVariableBitRate service category is intended for real time applications, that is those requiring tightly constrained delay and delay variation, as would be appropriate for voice and video applications. Sources are expected to transmit at a rate which varies with time. Equivalently, the source can be described as 'bursty'. Cells which are delayed beyond the value specified by CTD are assumed to be of significantly reduced value to the application. Real time VBR service may support statistical multiplexing of real time sources. The nrtVariableBitRate service category is intended for non-real time applications which have bursty traffic characteristics and which can be characterized in terms of a PCR, SCR, and MBS. For those cells which are transferred within the traffic contract, the application expects a low cell loss ratio. For all connections, it expects a bound on the mean cell transfer delay. Non-real time VBR service may support statistical multiplexing of connections. The unspecifiedBitRate service is intended for non-real time applications; that is, those not requiring tightly constrained delay and delay variation. UBR sources are expected to be bursty. UBR service supports a high degree of statistical multiplexing among sources. UBR service does not specify traffic related service guarantees. No numerical commitments are made with respect to the cell loss ratio experienced by a UBR connection, or as to the cell transfer delay experienced by cells on the connection.
U32 mscAtmIfVptPnniRccVcdWeight	1.3.6.1.4.1.562.36.2.1.114.9.7.3.2.10.1.4	Unsigned32	read-write	This attribute specifies an override for the weight of this unshaped connection. This attribute is ignored for shaped connections, for ABR connections, for connections on a CQC-based ATM FP and basic VPTs. When the value is set to sameAsCa, the weight is determined by the weight policy attribute under the CA service category component for all but standard VPT VCCs. For standard VPT VCCs, the weight is determined by the VCC's service category, when the value is set to sameAsCa. When this attribute is set to a value from 1 to 4095, that value is used for the weight policy of this connection relative to other connections. For all but standard VPT VCCs, weight policy determines the proportion of transit cell opportunities which are allocated to this connection, compared to other connections in the same service category. For standard VPT VCCs, weight policy determines the proportion of transmit cell opportunities which are allocated to this connection, compared to other connections associated with the VPT. When the value is set to upToQueueLimit, the weight policy is limited only by the txQueueLimit. VALUES ( 0 = upToQueueLimit 65535 = sameAsCa )
INT mscAtmIfVptPnniRccVcdQosClass	1.3.6.1.4.1.562.36.2.1.114.9.7.3.2.10.1.21	INTEGER	read-write	This attribute specifies the quality of service for both the forward and backward direction for this connection. Class 1 supports a QOS that meets Service Class A performance requirements (Circuit emulation, constant bit rate video). Class 2 supports a QOS that meets Service Class B performance requirements (Variable bit rate audio and video). Class 3 supports a QOS that meets Service Class C performance requirements (Connection-Oriented Data Transfer). Class 4 supports a QOS that meets Service Class D performance requirements (Connectionless Data Transfer). Class 0 is the unspecified bit rate QOS class; no objective is specified for the performance parameters.
INT mscAtmIfVptPnniRccVcdTrafficShaping	1.3.6.1.4.1.562.36.2.1.114.9.7.3.2.10.1.50	INTEGER	read-write	This attribute specifies whether this connection uses traffic shaping when transmitting traffic to the ATM interface. When sameAsCa is selected, traffic shaping for this connection is based on the trafficShaping attribute of the connection's service category component under the AtmIf CA. If the service category has traffic shaping enabled, then traffic shaping is enabled for the connection. Note that enabling traffic shaping may have no effect under certain cases. These cases are listed in the description of the trafficShaping operational attribute, which is under the Vcc Tm and Vpc Tm components. When disabled is selected, traffic shaping for this connection is disabled.
INT mscAtmIfVptPnniRccVcdUnshapedTransmitQueueing	1.3.6.1.4.1.562.36.2.1.114.9.7.3.2.10.1.60	INTEGER	read-write	This attribute only applies when this connection is unshaped. This attribute specifies the transmit queueing method for this connection if it is unshaped. Refer to the unshapedTransmitQueueing attribute under the AtmIf CA service category subcomponent for more details on the meaning of this attribute. When this attribute is set to sameAsCa, the transmit queueing method for the connection is based on the unshapedTransmitQueueing attribute of the connection's service category component under the ConnectionAdministrator. When this attribute is set to common, transmit traffic on this unshaped connection is destined for the common queue. The value sameAsInterface is for migration from previous software releases, but should no longer be used
INT mscAtmIfVptPnniRccVcdUsageParameterControl	1.3.6.1.4.1.562.36.2.1.114.9.7.3.2.10.1.70	INTEGER	read-write	This attribute specifies whether this connection enforces usage parameter control when receiving traffic from the ATM interface. When sameAsCa is selected, UPC for the connection is based on the usageParameterControl attribute of the connection's service category component under the ConnectionAdministrator. If the service category has UPC enabled, then UPC is enabled for the connection. Note that enabling UPC may have no effect under certain cases. These cases are listed in the description of the usageParameterControl operational attribute, which is under the Vcc Tm or Vpc Tm component. When disabled is selected, UPC for this connection is disabled. The value sameAsInterface is for migration from previous software releases, but should no longer be used
mscAtmIfVptPnniRccVcdTdpTable	1.3.6.1.4.1.562.36.2.1.114.9.7.3.2.387		not-accessible	This attribute is a vector of five traffic parameters whose meanings are defined by the trafficDescType attribute. The values of peak cell rate (PCR), sustained cell rate (SCR) and requested shaping rate are expressed in cell/s. Maximum burst size (MBS) is expressed in cells. CDVT is expressed in microseconds. The values of PCR, SCR, MBS and CDVT are used for connection admission control (CAC). The value of CDVT is only used for connections where the atmServiceCategory is constantBitRate. For all other values of atmServiceCategory, CDVT is ignored. The values of PCR, SCR and requested shaping rate are used to determine the actual shaping rate where traffic shaping is enabled. When trafficDescType is 3, parameter 1 represents the PCR for CLP equal to 0 and 1 traffic; parameter 4 represents the CDVT; and parameter 5 represents the requested shaping rate. A non-zero value in parameter 5 overrides any value in parameter 1. This result is used as the PCR. Parameter 1 must be non-zero. Parameters 2 and 3 must be zero. When trafficDescType is 6, parameter 1 represents the PCR for CLP equal to 0 and 1 traffic; parameter 2 represents the SCR for CLP equal to 0 and 1 traffic; parameter 3 represents the MBS for CLP equal to 0 and 1 traffic; parameter 4 represents the CDVT; and parameter 5 represents the requested shaping rate. A non-zero value in parameter 5 overrides any value in parameter 1. This result is used as the PCR. Parameters 1, 2, and 3 must be non-zero. Parameter 1 must be greater than or equal to parameter 2. Parameter 5 must either be zero (unused) or greater than or equal to parameter 2. When trafficDescType is 7, parameter 1 represents the PCR for CLP equal to 0 and 1 traffic; parameter 2 represents the SCR for CLP equal to 0 with cell discard; parameter 3 represents the MBS for CLP equal to 0 traffic; parameter 4 represents the CDVT; and parameter 5 represents the requested shaping rate. A non-zero value in parameter 5 overrides any value in parameter 1. This result is used as the PCR. Parameters 1, 2, and 3 must be non-zero. Parameter 1 must be greater than or equal to parameter 2. Parameter 5 must either be zero (unused) or greater than or equal to parameter 2. When trafficDescType is 8, parameter 1 represents the PCR for CLP equal to 0 and 1 traffic; parameter 2 represents the SCR for CLP equal to 0 traffic with cell tagging; parameter 3 represents the MBS for CLP equal to 0 traffic; parameter 4 represents the CDVT; and parameter 5 represents the requested shaping rate. A non-zero value in parameter 5 overrides any value in parameter 1. This result is used as the PCR. Parameters 1, 2, and 3 must be non-zero. Parameter 1 must be greater than or equal to parameter 2. Parameter 5 must either be zero (unused) or greater than or equal to parameter 2. Whenever it is valid for PCR to be specified, parameter 5 may also be used to specify a requested shaping rate. A non-zero value in parameter 5 overrides the value in parameter 1 and is used as the peak cell rate in calculations of CAC and shaping rate. For trafficDescType 3 the traffic is shaped at the next rate less than the PCR. For trafficDescType 6, 7, and 8, the traffic is shaped at the highest available rate which is between PCR and SCR. However, if there is no available shaping rate between PCR and SCR, traffic is shaped at the next rate above the PCR.
mscAtmIfVptPnniRccVcdTdpEntry	1.3.6.1.4.1.562.36.2.1.114.9.7.3.2.387.1		not-accessible	An entry in the mscAtmIfVptPnniRccVcdTdpTable.
I32 mscAtmIfVptPnniRccVcdTdpIndex	1.3.6.1.4.1.562.36.2.1.114.9.7.3.2.387.1.1	Integer32	not-accessible	This variable represents the mscAtmIfVptPnniRccVcdTdpTable specific index for the mscAtmIfVptPnniRccVcdTdpTable.
U32 mscAtmIfVptPnniRccVcdTdpValue	1.3.6.1.4.1.562.36.2.1.114.9.7.3.2.387.1.2	Unsigned32	read-write	This variable represents an individual value for the mscAtmIfVptPnniRccVcdTdpTable.
mscAtmIfVptPnniRccProvTable	1.3.6.1.4.1.562.36.2.1.114.9.7.3.10		not-accessible	This group contains the generic provisionable attributes of an Rcc component.
mscAtmIfVptPnniRccProvEntry	1.3.6.1.4.1.562.36.2.1.114.9.7.3.10.1		not-accessible	An entry in the mscAtmIfVptPnniRccProvTable.
U32 mscAtmIfVptPnniRccVci	1.3.6.1.4.1.562.36.2.1.114.9.7.3.10.1.1	Unsigned32	read-write	This attribute specifies the VCI for the Routing Control Channel (RCC). It is not recommended that the value be changed from the default of 18 unless absolutely necessary. If a different VCI is specified, ensure that the RCC at the far end is provisioned to use the same VCI, otherwise the RCC will not come up.
mscAtmIfVptPnniRccHlParmsTable	1.3.6.1.4.1.562.36.2.1.114.9.7.3.11		not-accessible	This group contains the provisionable Hello protocol parameters for an Rcc component.
mscAtmIfVptPnniRccHlParmsEntry	1.3.6.1.4.1.562.36.2.1.114.9.7.3.11.1		not-accessible	An entry in the mscAtmIfVptPnniRccHlParmsTable.
NUM mscAtmIfVptPnniRccHelloHoldDown	1.3.6.1.4.1.562.36.2.1.114.9.7.3.11.1.1	FixedPoint1	read-write	This attribute is used to limit the rate at which this node sends out Hello packets. Specifically, it specifies the minimum time between successive Hellos. A value of 0 specifies that the value provisioned for the helloHoldDown attribute of the ARtg Pnni component should be used.
U32 mscAtmIfVptPnniRccHelloInterval	1.3.6.1.4.1.562.36.2.1.114.9.7.3.11.1.2	Unsigned32	read-write	This attribute specifies the duration of the Hello Timer. Every helloInterval seconds, this node will send out a Hello packet to the neighbor node, subject to the helloHoldDown timer having expired at least once since the last Hello packet was sent. A value of 0 specifies that the value provisioned for the helloInterval attribute of the ARtg Pnni component should be used.
U32 mscAtmIfVptPnniRccHelloInactivityFactor	1.3.6.1.4.1.562.36.2.1.114.9.7.3.11.1.3	Unsigned32	read-write	This attribute specifies the number of Hello intervals allowed to pass without receiving a Hello from the neighbor node, before an attempt is made to re-stage. The hello inactivity timer is enabled in the oneWayInside, twoWayInside, oneWayOutside, twoWayOutside and commonOutside hello states (see the helloState attribute on the Rcc component for a description of these states). Note that the value for the Hello interval used in the calculation is the one specified in the Hello packet from the neighbor node. A value of 0 specifies that the value provisioned for the helloInactivityFactor attribute of the ARtg Pnni component should be used. DESCRIPTION
mscAtmIfVptPnniRccStateTable	1.3.6.1.4.1.562.36.2.1.114.9.7.3.12		not-accessible	This group contains the three OSI State attributes. The descriptions generically indicate what each state attribute implies about the component. Note that not all the values and state combinations described here are supported by every component which uses this group. For component-specific information and the valid state combinations, refer to NTP 241-7001-150, Passport Operations and Maintenance Guide.
mscAtmIfVptPnniRccStateEntry	1.3.6.1.4.1.562.36.2.1.114.9.7.3.12.1		not-accessible	An entry in the mscAtmIfVptPnniRccStateTable.
INT mscAtmIfVptPnniRccAdminState	1.3.6.1.4.1.562.36.2.1.114.9.7.3.12.1.1	INTEGER	read-only	This attribute indicates the OSI Administrative State of the component. The value locked indicates that the component is administratively prohibited from providing services for its users. A Lock or Lock - force command has been previously issued for this component. When the value is locked, the value of usageState must be idle. The value shuttingDown indicates that the component is administratively permitted to provide service to its existing users only. A Lock command was issued against the component and it is in the process of shutting down. The value unlocked indicates that the component is administratively permitted to provide services for its users. To enter this state, issue an Unlock command to this component.
INT mscAtmIfVptPnniRccOperationalState	1.3.6.1.4.1.562.36.2.1.114.9.7.3.12.1.2	INTEGER	read-only	This attribute indicates the OSI Operational State of the component. The value enabled indicates that the component is available for operation. Note that if adminState is locked, it would still not be providing service. The value disabled indicates that the component is not available for operation. For example, something is wrong with the component itself, or with another component on which this one depends. If the value is disabled, the usageState must be idle.
INT mscAtmIfVptPnniRccUsageState	1.3.6.1.4.1.562.36.2.1.114.9.7.3.12.1.3	INTEGER	read-only	This attribute indicates the OSI Usage State of the component. The value idle indicates that the component is not currently in use. The value active indicates that the component is in use and has spare capacity to provide for additional users. The value busy indicates that the component is in use and has no spare operating capacity for additional users at this time.
mscAtmIfVptPnniRccOperTable	1.3.6.1.4.1.562.36.2.1.114.9.7.3.13		not-accessible	This group contains the operational attributes for an Rcc component.
mscAtmIfVptPnniRccOperEntry	1.3.6.1.4.1.562.36.2.1.114.9.7.3.13.1		not-accessible	An entry in the mscAtmIfVptPnniRccOperTable.
INT mscAtmIfVptPnniRccType	1.3.6.1.4.1.562.36.2.1.114.9.7.3.13.1.1	INTEGER	read-only	This attribute indicates the role of this link in the PNNI hierarchy. The following values are possible: unknown: the Hello protocol has not yet determined the role of the link. lowestLevelHorizLink: the link is a horizontal link between two lowest level nodes. lowestLevelOutsideLink: the link is an outside link between two border nodes. horizontalLinkToLgn: the link is a horizontal link to a Logical Group Node (LGN). uplink: the link is a uplink to a higher level LGN.
INT mscAtmIfVptPnniRccNegotiatedVersion	1.3.6.1.4.1.562.36.2.1.114.9.7.3.13.1.2	INTEGER	read-only	This attribute indicates the PNNI version negotiated with the neighbor node.
INT mscAtmIfVptPnniRccHelloState	1.3.6.1.4.1.562.36.2.1.114.9.7.3.13.1.3	INTEGER	read-only	This attribute indicates the state of the Hello protocol exchange over this link. The following are the possible values for this attribute: down: the link is down; no PNNI routing packets will be sent over or received over such a link. This is the initial state of the Hello Finite State Machine, and can also be reached when lower-level protocols have indicated that the link is not usable. attempt: no Hello packets or Hello packets, with mismatch information, have been received recently from the neighbor. Attempts are made to contact the neighbor node by sending out Hello packets every helloInterval seconds. oneWayInside: Hello packets have been recently received from the neighbor and it has been established that both nodes are members of the same peer group, but the remote node ID and remote port ID in the neighbor's Hello packets were set to zero. A Hello packet is sent to the neighbor and the Hello timer is restarted. twoWayInside: Bidirectional communication over this link between this node and the neighbor node has been achieved. oneWayOutside: Hello packets have been recently received from the neighbor and it has been established that both nodes are members of a different peer group, but the remote node ID and remote port ID in the neighbor's Hello packets were set to zero. twoWayOutside: Hellos have recently been received from the neighbor indicating that the neighbor node belongs to a different peer group. The correct remote node ID and remote port ID fields were included in the Hello packet, but the nodal hierarchy list did not include any common peer group. This state can also be reached if a hierarchy mismatch occurs while in the commonOutside state. commonOutside: A common level of the routing hierarchy has been found, in addition to achieving full bi-directional communication between the two nodes.
STR mscAtmIfVptPnniRccRemoteNodeId	1.3.6.1.4.1.562.36.2.1.114.9.7.3.13.1.4	HexString	read-only	This attribute indicates the neighbor node's node id.
U32 mscAtmIfVptPnniRccRemotePortId	1.3.6.1.4.1.562.36.2.1.114.9.7.3.13.1.5	Unsigned32	read-only	This attribute indicates the neighbor node's port id.
mscAtmIfVptPnniRccStatsTable	1.3.6.1.4.1.562.36.2.1.114.9.7.3.14		not-accessible	This group contains the statistical attributes for an Rcc component.
mscAtmIfVptPnniRccStatsEntry	1.3.6.1.4.1.562.36.2.1.114.9.7.3.14.1		not-accessible	An entry in the mscAtmIfVptPnniRccStatsTable.
C32 mscAtmIfVptPnniRccHelloPacketsRx	1.3.6.1.4.1.562.36.2.1.114.9.7.3.14.1.1	Counter32	read-only	This attribute counts the total number of Hello packets received across this RCC, including bad and mismatched Hello packets. The counter wraps when it exceeds the maximum value.
C32 mscAtmIfVptPnniRccHelloPacketsTx	1.3.6.1.4.1.562.36.2.1.114.9.7.3.14.1.2	Counter32	read-only	This attribute counts the total number of Hello packets transmitted across this RCC. The counter wraps when it exceeds the maximum value.
C32 mscAtmIfVptPnniRccMismatchedHelloPacketsRx	1.3.6.1.4.1.562.36.2.1.114.9.7.3.14.1.3	Counter32	read-only	This attribute counts the total number of mismatched Hello packets received over this RCC. The counter wraps when it exceeds the maximum value.
C32 mscAtmIfVptPnniRccBadHelloPacketsRx	1.3.6.1.4.1.562.36.2.1.114.9.7.3.14.1.4	Counter32	read-only	This attribute counts the total number of bad Hello packets received over this RCC. The counter wraps when it exceeds the maximum value.
mscAtmIfVptPnniAddr	1.3.6.1.4.1.562.36.2.1.114.9.7.4
mscAtmIfVptPnniAddrRowStatusTable	1.3.6.1.4.1.562.36.2.1.114.9.7.4.1		not-accessible	This entry controls the addition and deletion of mscAtmIfVptPnniAddr components.
mscAtmIfVptPnniAddrRowStatusEntry	1.3.6.1.4.1.562.36.2.1.114.9.7.4.1.1		not-accessible	A single entry in the table represents a single mscAtmIfVptPnniAddr component.
ROW mscAtmIfVptPnniAddrRowStatus	1.3.6.1.4.1.562.36.2.1.114.9.7.4.1.1.1	RowStatus	read-write	This variable is used as the basis for SNMP naming of mscAtmIfVptPnniAddr components. These components can be added and deleted.
STR mscAtmIfVptPnniAddrComponentName	1.3.6.1.4.1.562.36.2.1.114.9.7.4.1.1.2	DisplayString	read-only	This variable provides the component's string name for use with the ASCII Console Interface
STO mscAtmIfVptPnniAddrStorageType	1.3.6.1.4.1.562.36.2.1.114.9.7.4.1.1.4	StorageType	read-only	This variable represents the storage type value for the mscAtmIfVptPnniAddr tables.
STR mscAtmIfVptPnniAddrAddressIndex	1.3.6.1.4.1.562.36.2.1.114.9.7.4.1.1.10	AsciiStringIndex	not-accessible	This variable represents an index for the mscAtmIfVptPnniAddr tables.
INT mscAtmIfVptPnniAddrAddressTypeIndex	1.3.6.1.4.1.562.36.2.1.114.9.7.4.1.1.11	INTEGER	not-accessible	This variable represents an index for the mscAtmIfVptPnniAddr tables.
mscAtmIfVptPnniAddrTermSP	1.3.6.1.4.1.562.36.2.1.114.9.7.4.2
mscAtmIfVptPnniAddrTermSPRowStatusTable	1.3.6.1.4.1.562.36.2.1.114.9.7.4.2.1		not-accessible	This entry controls the addition and deletion of mscAtmIfVptPnniAddrTermSP components.
mscAtmIfVptPnniAddrTermSPRowStatusEntry	1.3.6.1.4.1.562.36.2.1.114.9.7.4.2.1.1		not-accessible	A single entry in the table represents a single mscAtmIfVptPnniAddrTermSP component.
ROW mscAtmIfVptPnniAddrTermSPRowStatus	1.3.6.1.4.1.562.36.2.1.114.9.7.4.2.1.1.1	RowStatus	read-write	This variable is used as the basis for SNMP naming of mscAtmIfVptPnniAddrTermSP components. These components can be added and deleted.
STR mscAtmIfVptPnniAddrTermSPComponentName	1.3.6.1.4.1.562.36.2.1.114.9.7.4.2.1.1.2	DisplayString	read-only	This variable provides the component's string name for use with the ASCII Console Interface
STO mscAtmIfVptPnniAddrTermSPStorageType	1.3.6.1.4.1.562.36.2.1.114.9.7.4.2.1.1.4	StorageType	read-only	This variable represents the storage type value for the mscAtmIfVptPnniAddrTermSP tables.
NON mscAtmIfVptPnniAddrTermSPIndex	1.3.6.1.4.1.562.36.2.1.114.9.7.4.2.1.1.10	NonReplicated	not-accessible	This variable represents the index for the mscAtmIfVptPnniAddrTermSP tables.
mscAtmIfVptPnniAddrPnniInfo	1.3.6.1.4.1.562.36.2.1.114.9.7.4.3
mscAtmIfVptPnniAddrPnniInfoRowStatusTable	1.3.6.1.4.1.562.36.2.1.114.9.7.4.3.1		not-accessible	This entry controls the addition and deletion of mscAtmIfVptPnniAddrPnniInfo components.
mscAtmIfVptPnniAddrPnniInfoRowStatusEntry	1.3.6.1.4.1.562.36.2.1.114.9.7.4.3.1.1		not-accessible	A single entry in the table represents a single mscAtmIfVptPnniAddrPnniInfo component.
ROW mscAtmIfVptPnniAddrPnniInfoRowStatus	1.3.6.1.4.1.562.36.2.1.114.9.7.4.3.1.1.1	RowStatus	read-write	This variable is used as the basis for SNMP naming of mscAtmIfVptPnniAddrPnniInfo components. These components can be added and deleted.
STR mscAtmIfVptPnniAddrPnniInfoComponentName	1.3.6.1.4.1.562.36.2.1.114.9.7.4.3.1.1.2	DisplayString	read-only	This variable provides the component's string name for use with the ASCII Console Interface
STO mscAtmIfVptPnniAddrPnniInfoStorageType	1.3.6.1.4.1.562.36.2.1.114.9.7.4.3.1.1.4	StorageType	read-only	This variable represents the storage type value for the mscAtmIfVptPnniAddrPnniInfo tables.
NON mscAtmIfVptPnniAddrPnniInfoIndex	1.3.6.1.4.1.562.36.2.1.114.9.7.4.3.1.1.10	NonReplicated	not-accessible	This variable represents the index for the mscAtmIfVptPnniAddrPnniInfo tables.
mscAtmIfVptPnniAddrPnniInfoProvTable	1.3.6.1.4.1.562.36.2.1.114.9.7.4.3.10		not-accessible	This attribute group contains the provisioned attributes relating to PNNI for a PnniInfo component.
mscAtmIfVptPnniAddrPnniInfoProvEntry	1.3.6.1.4.1.562.36.2.1.114.9.7.4.3.10.1		not-accessible	An entry in the mscAtmIfVptPnniAddrPnniInfoProvTable.
INT mscAtmIfVptPnniAddrPnniInfoScope	1.3.6.1.4.1.562.36.2.1.114.9.7.4.3.10.1.1	INTEGER	read-write	This attribute specifies the scope of the ATM address, which is the highest level up to which this address will be advertised in the PNNI hierarchy. The scope must be set to a value numerically less than or equal to the level of the lowest level peer group containing this node. Setting the scope to 0 will cause the address to be advertised globally within this PNNI routing domain.
INT mscAtmIfVptPnniAddrPnniInfoReachability	1.3.6.1.4.1.562.36.2.1.114.9.7.4.3.10.1.2	INTEGER	read-write	This attribute indicates whether the address is internal or exterior. An internal reachable address is an address of a destination that is directly attached to the logical node advertising the address. An exterior reachable address is an address that can be reached through a PNNI routing domain, but which is not located in that PNNI routing domain.
mscAtmIfVptPnniAddrOperTable	1.3.6.1.4.1.562.36.2.1.114.9.7.4.10		not-accessible	This attribute group contains the operational attributes for the Address component.
mscAtmIfVptPnniAddrOperEntry	1.3.6.1.4.1.562.36.2.1.114.9.7.4.10.1		not-accessible	An entry in the mscAtmIfVptPnniAddrOperTable.
INT mscAtmIfVptPnniAddrScope	1.3.6.1.4.1.562.36.2.1.114.9.7.4.10.1.1	INTEGER	read-only	This attribute indicates the scope of the ATM address, which is the highest level to which this address will be advertised in the PNNI hierarchy. If no PnniInfo subcomponent has been provisioned, then the scope will default to the level of this node in the PNNI hierarchy. If this node does not participate in a PNNI hierarchy, then this attribute will have the value of -1.
INT mscAtmIfVptPnniAddrReachability	1.3.6.1.4.1.562.36.2.1.114.9.7.4.10.1.2	INTEGER	read-only	This attribute indicates whether the address is internal or exterior. An internal reachable address is an address of a destination that is directly attached to the logical node advertising the address. An exterior reachable address is an address that can be reached through a PNNI routing domain, but which is not located in that PNNI routing domain.
mscAtmIfVptPnniProvTable	1.3.6.1.4.1.562.36.2.1.114.9.7.10		not-accessible	This group contains the provisionable attributes for the Pnni component.
mscAtmIfVptPnniProvEntry	1.3.6.1.4.1.562.36.2.1.114.9.7.10.1		not-accessible	An entry in the mscAtmIfVptPnniProvTable.
U32 mscAtmIfVptPnniSoftPvcRetryPeriod	1.3.6.1.4.1.562.36.2.1.114.9.7.10.1.1	Unsigned32	read-write	This attribute represents the time in seconds to wait between call setup retries. The resolution is to the nearest 10 seconds. This attribute has been obsoleted and is replaced by the softPvpAndPvcRetryPeriod attribute.
U32 mscAtmIfVptPnniSoftPvpAndPvcRetryPeriod	1.3.6.1.4.1.562.36.2.1.114.9.7.10.1.2	Unsigned32	read-write	This attribute represents the time in seconds to wait between soft PVP or soft PVC call setup retries. The resolution is to the nearest 10 seconds.
U32 mscAtmIfVptPnniSoftPvpAndPvcHoldOffTime	1.3.6.1.4.1.562.36.2.1.114.9.7.10.1.5	Unsigned32	read-write	This attribute specifies how long to hold off retries following a release or the connection. The resolution is to the nearest 50 ms.
mscAtmIfVptPnniAdminWeightsTable	1.3.6.1.4.1.562.36.2.1.114.9.7.11		not-accessible	This group contains the provisionable administrative weights for the Pnni component. These weights will be used by Generic Connection Admission Control (GCAC) if administrative weight is the selected optimization criterion.
mscAtmIfVptPnniAdminWeightsEntry	1.3.6.1.4.1.562.36.2.1.114.9.7.11.1		not-accessible	An entry in the mscAtmIfVptPnniAdminWeightsTable.
U32 mscAtmIfVptPnniCbrWeight	1.3.6.1.4.1.562.36.2.1.114.9.7.11.1.1	Unsigned32	read-write	This attribute specifies the administrative weight assigned for setting up switched calls with a service category of Constant Bit Rate (CBR) for this PNNI interface. The value specified will be used by Generic Connection Admission Control (GCAC) if administrative weight is the selected optimization criterion; the higher the value, the less desirable the link will be in path selection.
U32 mscAtmIfVptPnniRtVbrWeight	1.3.6.1.4.1.562.36.2.1.114.9.7.11.1.2	Unsigned32	read-write	This attribute specifies the administrative weight assigned for setting up switched calls with a service category of Real-Time Variable Bit Rate (RT-VBR) for this PNNI interface. The value specified will be used by Generic Connection Admission Control (GCAC) if administrative weight is the selected optimization criterion; the higher the value, the less desirable the link will be in path selection.
U32 mscAtmIfVptPnniNrtVbrWeight	1.3.6.1.4.1.562.36.2.1.114.9.7.11.1.3	Unsigned32	read-write	This attribute specifies the administrative weight assigned for setting up switched calls with a service category of Non Real-Time Variable Bit Rate (NRT-VBR) for this PNNI interface. The value specified will be used by Generic Connection Admission Control (GCAC) if administrative weight is the selected optimization criterion; the higher the value, the less desirable the link will be in path selection.
U32 mscAtmIfVptPnniUbrWeight	1.3.6.1.4.1.562.36.2.1.114.9.7.11.1.4	Unsigned32	read-write	This attribute specifies the administrative weight assigned for setting up switched calls with a service category of Unspecified Bit Rate (UBR) for this PNNI interface. The value specified will be used by Generic Connection Admission Control (GCAC) if administrative weight is the selected optimization criterion; the higher the value, the less desirable the link will be in path selection.
mscAtmIfVptPnniAcctOptTable	1.3.6.1.4.1.562.36.2.1.114.9.7.12		not-accessible	This group contains the provisionable attributes for accounting.
mscAtmIfVptPnniAcctOptEntry	1.3.6.1.4.1.562.36.2.1.114.9.7.12.1		not-accessible	An entry in the mscAtmIfVptPnniAcctOptTable.
OCT mscAtmIfVptPnniAccountCollection	1.3.6.1.4.1.562.36.2.1.114.9.7.12.1.1	OCTET STRING	read-write	This attribute is used to turn accounting on or off for SVC and SPVC connections. It also specifies the reason(s) for which accounting data is collected: billing, test, study, audit, or force. If the set of reasons is not empty then accounting records will be generated by this interface in the following situations: - on a TODA changeover if TODA is enabled; - every 12 hours (per connection) if TODA is disabled; - on every call clear (a call record with final cell counts). If none of the reasons is present, then accounting will be suppressed. The reason for collection is recorded in the accounting record, in the attribute callingCollectReason or calledCollectReason as appropriate. Description of bits: bill(0) test(1) study(2) audit(3) force(4)
INT mscAtmIfVptPnniAccountConnectionType	1.3.6.1.4.1.562.36.2.1.114.9.7.12.1.2	INTEGER	read-write	This attribute specifies whether accounting records generated by this interface should be marked as originating, terminating or intermediate. This attribute, in combination with the direction of the call, determines the value of attribute connPointType of the accounting record and may be used by downstream accounting processes to correlate the records. If the value is origTerm then records generated for incoming calls will be marked as originating and records generated for outgoing calls will be marked as terminating. If the value is intermediate then records generated for all calls will be marked as intermediate.
U32 mscAtmIfVptPnniAccountClass	1.3.6.1.4.1.562.36.2.1.114.9.7.12.1.3	Unsigned32	read-write	This attribute specifies the accounting class associated with the interface. Its meaning is determined by the network operator. Its value is simply recorded in the accounting records generated by this interface, in the attribute callingServiceType or calledServiceType as appropriate.
U32 mscAtmIfVptPnniServiceExchange	1.3.6.1.4.1.562.36.2.1.114.9.7.12.1.4	Unsigned32	read-write	This attribute specifies the data service exchange associated with this interface. Its meaning is determined by the network operator. Its value is simply recorded in the accounting records generated by this interface, in the attribute callingDse or calledDse as appropriate.
mscAtmIfVptPnniOperationalTable	1.3.6.1.4.1.562.36.2.1.114.9.7.13		not-accessible	This group contains the operational attributes for a Pnni component.
mscAtmIfVptPnniOperationalEntry	1.3.6.1.4.1.562.36.2.1.114.9.7.13.1		not-accessible	An entry in the mscAtmIfVptPnniOperationalTable.
U32 mscAtmIfVptPnniPortId	1.3.6.1.4.1.562.36.2.1.114.9.7.13.1.1	Unsigned32	read-only	This attribute indicates the port id of the PNNI interface, which is the parent AtmIf's instance number.
mscAtmIfVptPnniVProvTable	1.3.6.1.4.1.562.36.2.1.114.9.7.14		not-accessible	This group contains the provisionable attributes for the Pnni component which are specific to virtual PNNI interfaces.
mscAtmIfVptPnniVProvEntry	1.3.6.1.4.1.562.36.2.1.114.9.7.14.1		not-accessible	An entry in the mscAtmIfVptPnniVProvTable.
U32 mscAtmIfVptPnniVpci	1.3.6.1.4.1.562.36.2.1.114.9.7.14.1.1	Unsigned32	read-write	This attribute specifies the Virtual Path Connection Identifier (VPCI) to be used between this signalling entity and its peer. The VPCI of the peer virtual PNNI must have the same value for switched connections to be set up across the interface.
mscAtmIfPnni	1.3.6.1.4.1.562.36.2.1.114.96
mscAtmIfPnniRowStatusTable	1.3.6.1.4.1.562.36.2.1.114.96.1		not-accessible	This entry controls the addition and deletion of mscAtmIfPnni components.
mscAtmIfPnniRowStatusEntry	1.3.6.1.4.1.562.36.2.1.114.96.1.1		not-accessible	A single entry in the table represents a single mscAtmIfPnni component.
ROW mscAtmIfPnniRowStatus	1.3.6.1.4.1.562.36.2.1.114.96.1.1.1	RowStatus	read-write	This variable is used as the basis for SNMP naming of mscAtmIfPnni components. These components can be added and deleted.
STR mscAtmIfPnniComponentName	1.3.6.1.4.1.562.36.2.1.114.96.1.1.2	DisplayString	read-only	This variable provides the component's string name for use with the ASCII Console Interface
STO mscAtmIfPnniStorageType	1.3.6.1.4.1.562.36.2.1.114.96.1.1.4	StorageType	read-only	This variable represents the storage type value for the mscAtmIfPnni tables.
NON mscAtmIfPnniIndex	1.3.6.1.4.1.562.36.2.1.114.96.1.1.10	NonReplicated	not-accessible	This variable represents the index for the mscAtmIfPnni tables.
mscAtmIfPnniSig	1.3.6.1.4.1.562.36.2.1.114.96.2
mscAtmIfPnniSigRowStatusTable	1.3.6.1.4.1.562.36.2.1.114.96.2.1		not-accessible	This entry controls the addition and deletion of mscAtmIfPnniSig components.
mscAtmIfPnniSigRowStatusEntry	1.3.6.1.4.1.562.36.2.1.114.96.2.1.1		not-accessible	A single entry in the table represents a single mscAtmIfPnniSig component.
ROW mscAtmIfPnniSigRowStatus	1.3.6.1.4.1.562.36.2.1.114.96.2.1.1.1	RowStatus	read-only	This variable is used as the basis for SNMP naming of mscAtmIfPnniSig components. These components cannot be added nor deleted.
STR mscAtmIfPnniSigComponentName	1.3.6.1.4.1.562.36.2.1.114.96.2.1.1.2	DisplayString	read-only	This variable provides the component's string name for use with the ASCII Console Interface
STO mscAtmIfPnniSigStorageType	1.3.6.1.4.1.562.36.2.1.114.96.2.1.1.4	StorageType	read-only	This variable represents the storage type value for the mscAtmIfPnniSig tables.
NON mscAtmIfPnniSigIndex	1.3.6.1.4.1.562.36.2.1.114.96.2.1.1.10	NonReplicated	not-accessible	This variable represents the index for the mscAtmIfPnniSig tables.
mscAtmIfPnniSigVcd	1.3.6.1.4.1.562.36.2.1.114.96.2.2
mscAtmIfPnniSigVcdRowStatusTable	1.3.6.1.4.1.562.36.2.1.114.96.2.2.1		not-accessible	This entry controls the addition and deletion of mscAtmIfPnniSigVcd components.
mscAtmIfPnniSigVcdRowStatusEntry	1.3.6.1.4.1.562.36.2.1.114.96.2.2.1.1		not-accessible	A single entry in the table represents a single mscAtmIfPnniSigVcd component.
ROW mscAtmIfPnniSigVcdRowStatus	1.3.6.1.4.1.562.36.2.1.114.96.2.2.1.1.1	RowStatus	read-write	This variable is used as the basis for SNMP naming of mscAtmIfPnniSigVcd components. These components can be added and deleted.
STR mscAtmIfPnniSigVcdComponentName	1.3.6.1.4.1.562.36.2.1.114.96.2.2.1.1.2	DisplayString	read-only	This variable provides the component's string name for use with the ASCII Console Interface
STO mscAtmIfPnniSigVcdStorageType	1.3.6.1.4.1.562.36.2.1.114.96.2.2.1.1.4	StorageType	read-only	This variable represents the storage type value for the mscAtmIfPnniSigVcd tables.
NON mscAtmIfPnniSigVcdIndex	1.3.6.1.4.1.562.36.2.1.114.96.2.2.1.1.10	NonReplicated	not-accessible	This variable represents the index for the mscAtmIfPnniSigVcd tables.
mscAtmIfPnniSigVcdProvTable	1.3.6.1.4.1.562.36.2.1.114.96.2.2.10		not-accessible	This group contains the provisionable traffic attributes for a control channel.
mscAtmIfPnniSigVcdProvEntry	1.3.6.1.4.1.562.36.2.1.114.96.2.2.10.1		not-accessible	An entry in the mscAtmIfPnniSigVcdProvTable.
INT mscAtmIfPnniSigVcdTrafficDescType	1.3.6.1.4.1.562.36.2.1.114.96.2.2.10.1.1	INTEGER	read-write	This attribute specifies the type of traffic management which is applied to both the transmit and receive direction of this connection as defined in the ATM Forum. The trafficDescType determines the number and meaning of the parameters in the trafficDescParm attribute.
INT mscAtmIfPnniSigVcdAtmServiceCategory	1.3.6.1.4.1.562.36.2.1.114.96.2.2.10.1.3	INTEGER	read-write	This attribute specifies the ATM service category for both directions of the connection. The constantBitRate service category is intended for real time applications, that is those requiring tightly constrained delay and delay variation, as would be appropriate for voice and video applications. The consistent availability of a fixed quantity of bandwidth is considered appropriate for CBR service. Cells which are delayed beyond the value specified by CellTransfer Delay are assumed to be of significantly reduce value to the application. The rtVariableBitRate service category is intended for real time applications, that is those requiring tightly constrained delay and delay variation, as would be appropriate for voice and video applications. Sources are expected to transmit at a rate which varies with time. Equivalently, the source can be described as 'bursty'. Cells which are delayed beyond the value specified by CTD are assumed to be of significantly reduced value to the application. Real time VBR service may support statistical multiplexing of real time sources. The nrtVariableBitRate service category is intended for non-real time applications which have bursty traffic characteristics and which can be characterized in terms of a PCR, SCR, and MBS. For those cells which are transferred within the traffic contract, the application expects a low cell loss ratio. For all connections, it expects a bound on the mean cell transfer delay. Non-real time VBR service may support statistical multiplexing of connections. The unspecifiedBitRate service is intended for non-real time applications; that is, those not requiring tightly constrained delay and delay variation. UBR sources are expected to be bursty. UBR service supports a high degree of statistical multiplexing among sources. UBR service does not specify traffic related service guarantees. No numerical commitments are made with respect to the cell loss ratio experienced by a UBR connection, or as to the cell transfer delay experienced by cells on the connection.
U32 mscAtmIfPnniSigVcdWeight	1.3.6.1.4.1.562.36.2.1.114.96.2.2.10.1.4	Unsigned32	read-write	This attribute specifies an override for the weight of this unshaped connection. This attribute is ignored for shaped connections, for ABR connections, for connections on a CQC-based ATM FP and basic VPTs. When the value is set to sameAsCa, the weight is determined by the weight policy attribute under the CA service category component for all but standard VPT VCCs. For standard VPT VCCs, the weight is determined by the VCC's service category, when the value is set to sameAsCa. When this attribute is set to a value from 1 to 4095, that value is used for the weight policy of this connection relative to other connections. For all but standard VPT VCCs, weight policy determines the proportion of transit cell opportunities which are allocated to this connection, compared to other connections in the same service category. For standard VPT VCCs, weight policy determines the proportion of transmit cell opportunities which are allocated to this connection, compared to other connections associated with the VPT. When the value is set to upToQueueLimit, the weight policy is limited only by the txQueueLimit. VALUES ( 0 = upToQueueLimit 65535 = sameAsCa )
INT mscAtmIfPnniSigVcdQosClass	1.3.6.1.4.1.562.36.2.1.114.96.2.2.10.1.21	INTEGER	read-write	This attribute specifies the quality of service for both the forward and backward direction for this connection. Class 1 supports a QOS that meets Service Class A performance requirements (Circuit emulation, constant bit rate video). Class 2 supports a QOS that meets Service Class B performance requirements (Variable bit rate audio and video). Class 3 supports a QOS that meets Service Class C performance requirements (Connection-Oriented Data Transfer). Class 4 supports a QOS that meets Service Class D performance requirements (Connectionless Data Transfer). Class 0 is the unspecified bit rate QOS class; no objective is specified for the performance parameters.
INT mscAtmIfPnniSigVcdTrafficShaping	1.3.6.1.4.1.562.36.2.1.114.96.2.2.10.1.50	INTEGER	read-write	This attribute specifies whether this connection uses traffic shaping when transmitting traffic to the ATM interface. When sameAsCa is selected, traffic shaping for this connection is based on the trafficShaping attribute of the connection's service category component under the AtmIf CA. If the service category has traffic shaping enabled, then traffic shaping is enabled for the connection. Note that enabling traffic shaping may have no effect under certain cases. These cases are listed in the description of the trafficShaping operational attribute, which is under the Vcc Tm and Vpc Tm components. When disabled is selected, traffic shaping for this connection is disabled.
INT mscAtmIfPnniSigVcdUnshapedTransmitQueueing	1.3.6.1.4.1.562.36.2.1.114.96.2.2.10.1.60	INTEGER	read-write	This attribute only applies when this connection is unshaped. This attribute specifies the transmit queueing method for this connection if it is unshaped. Refer to the unshapedTransmitQueueing attribute under the AtmIf CA service category subcomponent for more details on the meaning of this attribute. When this attribute is set to sameAsCa, the transmit queueing method for the connection is based on the unshapedTransmitQueueing attribute of the connection's service category component under the ConnectionAdministrator. When this attribute is set to common, transmit traffic on this unshaped connection is destined for the common queue. The value sameAsInterface is for migration from previous software releases, but should no longer be used
INT mscAtmIfPnniSigVcdUsageParameterControl	1.3.6.1.4.1.562.36.2.1.114.96.2.2.10.1.70	INTEGER	read-write	This attribute specifies whether this connection enforces usage parameter control when receiving traffic from the ATM interface. When sameAsCa is selected, UPC for the connection is based on the usageParameterControl attribute of the connection's service category component under the ConnectionAdministrator. If the service category has UPC enabled, then UPC is enabled for the connection. Note that enabling UPC may have no effect under certain cases. These cases are listed in the description of the usageParameterControl operational attribute, which is under the Vcc Tm or Vpc Tm component. When disabled is selected, UPC for this connection is disabled. The value sameAsInterface is for migration from previous software releases, but should no longer be used
mscAtmIfPnniSigVcdTdpTable	1.3.6.1.4.1.562.36.2.1.114.96.2.2.387		not-accessible	This attribute is a vector of five traffic parameters whose meanings are defined by the trafficDescType attribute. The values of peak cell rate (PCR), sustained cell rate (SCR) and requested shaping rate are expressed in cell/s. Maximum burst size (MBS) is expressed in cells. CDVT is expressed in microseconds. The values of PCR, SCR, MBS and CDVT are used for connection admission control (CAC). The value of CDVT is only used for connections where the atmServiceCategory is constantBitRate. For all other values of atmServiceCategory, CDVT is ignored. The values of PCR, SCR and requested shaping rate are used to determine the actual shaping rate where traffic shaping is enabled. When trafficDescType is 3, parameter 1 represents the PCR for CLP equal to 0 and 1 traffic; parameter 4 represents the CDVT; and parameter 5 represents the requested shaping rate. A non-zero value in parameter 5 overrides any value in parameter 1. This result is used as the PCR. Parameter 1 must be non-zero. Parameters 2 and 3 must be zero. When trafficDescType is 6, parameter 1 represents the PCR for CLP equal to 0 and 1 traffic; parameter 2 represents the SCR for CLP equal to 0 and 1 traffic; parameter 3 represents the MBS for CLP equal to 0 and 1 traffic; parameter 4 represents the CDVT; and parameter 5 represents the requested shaping rate. A non-zero value in parameter 5 overrides any value in parameter 1. This result is used as the PCR. Parameters 1, 2, and 3 must be non-zero. Parameter 1 must be greater than or equal to parameter 2. Parameter 5 must either be zero (unused) or greater than or equal to parameter 2. When trafficDescType is 7, parameter 1 represents the PCR for CLP equal to 0 and 1 traffic; parameter 2 represents the SCR for CLP equal to 0 with cell discard; parameter 3 represents the MBS for CLP equal to 0 traffic; parameter 4 represents the CDVT; and parameter 5 represents the requested shaping rate. A non-zero value in parameter 5 overrides any value in parameter 1. This result is used as the PCR. Parameters 1, 2, and 3 must be non-zero. Parameter 1 must be greater than or equal to parameter 2. Parameter 5 must either be zero (unused) or greater than or equal to parameter 2. When trafficDescType is 8, parameter 1 represents the PCR for CLP equal to 0 and 1 traffic; parameter 2 represents the SCR for CLP equal to 0 traffic with cell tagging; parameter 3 represents the MBS for CLP equal to 0 traffic; parameter 4 represents the CDVT; and parameter 5 represents the requested shaping rate. A non-zero value in parameter 5 overrides any value in parameter 1. This result is used as the PCR. Parameters 1, 2, and 3 must be non-zero. Parameter 1 must be greater than or equal to parameter 2. Parameter 5 must either be zero (unused) or greater than or equal to parameter 2. Whenever it is valid for PCR to be specified, parameter 5 may also be used to specify a requested shaping rate. A non-zero value in parameter 5 overrides the value in parameter 1 and is used as the peak cell rate in calculations of CAC and shaping rate. For trafficDescType 3 the traffic is shaped at the next rate less than the PCR. For trafficDescType 6, 7, and 8, the traffic is shaped at the highest available rate which is between PCR and SCR. However, if there is no available shaping rate between PCR and SCR, traffic is shaped at the next rate above the PCR.
mscAtmIfPnniSigVcdTdpEntry	1.3.6.1.4.1.562.36.2.1.114.96.2.2.387.1		not-accessible	An entry in the mscAtmIfPnniSigVcdTdpTable.
I32 mscAtmIfPnniSigVcdTdpIndex	1.3.6.1.4.1.562.36.2.1.114.96.2.2.387.1.1	Integer32	not-accessible	This variable represents the mscAtmIfPnniSigVcdTdpTable specific index for the mscAtmIfPnniSigVcdTdpTable.
U32 mscAtmIfPnniSigVcdTdpValue	1.3.6.1.4.1.562.36.2.1.114.96.2.2.387.1.2	Unsigned32	read-write	This variable represents an individual value for the mscAtmIfPnniSigVcdTdpTable.
mscAtmIfPnniSigProvTable	1.3.6.1.4.1.562.36.2.1.114.96.2.10		not-accessible	This attribute group contains the provisionable attributes for the Signalling component.
mscAtmIfPnniSigProvEntry	1.3.6.1.4.1.562.36.2.1.114.96.2.10.1		not-accessible	An entry in the mscAtmIfPnniSigProvTable.
U32 mscAtmIfPnniSigVci	1.3.6.1.4.1.562.36.2.1.114.96.2.10.1.1	Unsigned32	read-write	This attribute specifies the signalling channel number.
INT mscAtmIfPnniSigAddressConversion	1.3.6.1.4.1.562.36.2.1.114.96.2.10.1.2	INTEGER	read-write	This attribute specifies the address conversion on the outgoing signalling PDUs. The options are none, nativeE164, or nsap. The none option is the default and if this option is chosen then nothing is done to the address information element (IE) in the outgoing signalling message. If nativeE164 option is chosen, then only NSAP encapsulated E.164 addresses with zeros in the ESI are converted to native E.164 format in the outgoing signalling message. If the NSAP address is not encapsulated E.164 or the ESI field is not zeros and the nativeE164 option is chosen, then the call is cleared. If the nsap option is chosen, then native E.164 addresses are converted to NSAP E.164 with zeros in the ESI field; otherwise the address is in NSAP format and is not changed.
INT mscAtmIfPnniSigOperatingMode	1.3.6.1.4.1.562.36.2.1.114.96.2.10.1.3	INTEGER	read-write	This attribute specifies the operating mode of the signaling channel. provisionedOnly indicates that only SPVCs and SPVPs are supported on the interface and SVCs are not supported. This value is permitted only on UNI interfaces. normal indicates that SVCs, SPVCs, and SPVPs are supported on the interface.
mscAtmIfPnniSigStateTable	1.3.6.1.4.1.562.36.2.1.114.96.2.11		not-accessible	This group contains the three OSI State attributes. The descriptions generically indicate what each state attribute implies about the component. Note that not all the values and state combinations described here are supported by every component which uses this group. For component-specific information and the valid state combinations, refer to NTP 241-7001-150, Passport Operations and Maintenance Guide.
mscAtmIfPnniSigStateEntry	1.3.6.1.4.1.562.36.2.1.114.96.2.11.1		not-accessible	An entry in the mscAtmIfPnniSigStateTable.
INT mscAtmIfPnniSigAdminState	1.3.6.1.4.1.562.36.2.1.114.96.2.11.1.1	INTEGER	read-only	This attribute indicates the OSI Administrative State of the component. The value locked indicates that the component is administratively prohibited from providing services for its users. A Lock or Lock - force command has been previously issued for this component. When the value is locked, the value of usageState must be idle. The value shuttingDown indicates that the component is administratively permitted to provide service to its existing users only. A Lock command was issued against the component and it is in the process of shutting down. The value unlocked indicates that the component is administratively permitted to provide services for its users. To enter this state, issue an Unlock command to this component.
INT mscAtmIfPnniSigOperationalState	1.3.6.1.4.1.562.36.2.1.114.96.2.11.1.2	INTEGER	read-only	This attribute indicates the OSI Operational State of the component. The value enabled indicates that the component is available for operation. Note that if adminState is locked, it would still not be providing service. The value disabled indicates that the component is not available for operation. For example, something is wrong with the component itself, or with another component on which this one depends. If the value is disabled, the usageState must be idle.
INT mscAtmIfPnniSigUsageState	1.3.6.1.4.1.562.36.2.1.114.96.2.11.1.3	INTEGER	read-only	This attribute indicates the OSI Usage State of the component. The value idle indicates that the component is not currently in use. The value active indicates that the component is in use and has spare capacity to provide for additional users. The value busy indicates that the component is in use and has no spare operating capacity for additional users at this time.
mscAtmIfPnniSigOperTable	1.3.6.1.4.1.562.36.2.1.114.96.2.12		not-accessible	This attribute contains the operational attributes for the AtmSignalling component.
mscAtmIfPnniSigOperEntry	1.3.6.1.4.1.562.36.2.1.114.96.2.12.1		not-accessible	An entry in the mscAtmIfPnniSigOperTable.
U32 mscAtmIfPnniSigLastTxCauseCode	1.3.6.1.4.1.562.36.2.1.114.96.2.12.1.1	Unsigned32	read-only	This attribute indicates the cause code in the last transmitted signalling message that contains the CAUSE information element. The cause code is used to describe the reason for generating certain signalling messages.
HEX mscAtmIfPnniSigLastTxDiagCode	1.3.6.1.4.1.562.36.2.1.114.96.2.12.1.2	Hex	read-only	This attribute contains the diagnostic code in the last transmitted signalling message. The diagnostic code is contained in the CAUSE information element and identifies an information element type or timer type. The diagnostic code is present only if a procedural error is detected by the signalling protocol. A diagnostic code is always accompanied by the cause code. If there is no failure, this attribute is set to 0.
U32 mscAtmIfPnniSigLastRxCauseCode	1.3.6.1.4.1.562.36.2.1.114.96.2.12.1.3	Unsigned32	read-only	This attribute contains the cause code in the last received signalling message that contains the CAUSE information element. The cause code is used to describe the reason for generating certain signalling messages.
HEX mscAtmIfPnniSigLastRxDiagCode	1.3.6.1.4.1.562.36.2.1.114.96.2.12.1.4	Hex	read-only	This attribute contains the diagnostic code in the last received signalling message. The diagnostic code is contained in the CAUSE information element and identifies an information element type or timer type. The diagnostic code is present only if a procedural error is detected by the signalling protocol. A diagnostic code is always accompanied by the cause code. If there is no failure, this attribute is set to 0.
mscAtmIfPnniSigStatsTable	1.3.6.1.4.1.562.36.2.1.114.96.2.13		not-accessible	This attribute group contains the statistics associated with the AtmSignalling component.
mscAtmIfPnniSigStatsEntry	1.3.6.1.4.1.562.36.2.1.114.96.2.13.1		not-accessible	An entry in the mscAtmIfPnniSigStatsTable.
C32 mscAtmIfPnniSigCurrentConnections	1.3.6.1.4.1.562.36.2.1.114.96.2.13.1.1	Counter32	read-only	This attribute indicates the total number of currently active connections.
G32 mscAtmIfPnniSigPeakConnections	1.3.6.1.4.1.562.36.2.1.114.96.2.13.1.2	Gauge32	read-only	This attribute indicates the high water mark of active point-to- point and point-to-multipoint connections.
C32 mscAtmIfPnniSigSuccessfulConnections	1.3.6.1.4.1.562.36.2.1.114.96.2.13.1.3	Counter32	read-only	This attribute counts the total number of switched point-to- point and point-to-multipoint connections that were successfully established. The counter wraps to 0 when the maximum value is exceeded.
C32 mscAtmIfPnniSigFailedConnections	1.3.6.1.4.1.562.36.2.1.114.96.2.13.1.4	Counter32	read-only	This attribute counts the total number of switched connections that were not successfully established.The counter wraps to 0 when the maximum value is exceeded.
C32 mscAtmIfPnniSigTxPdus	1.3.6.1.4.1.562.36.2.1.114.96.2.13.1.5	Counter32	read-only	This attribute counts the number of transmitted signalling PDUs.The counter wraps to 0 when the maximum value is exceeded.
C32 mscAtmIfPnniSigRxPdus	1.3.6.1.4.1.562.36.2.1.114.96.2.13.1.6	Counter32	read-only	This attribute counts the number of received signalling PDUs.The counter wraps to 0 when the maximum value is exceeded.
G32 mscAtmIfPnniSigCurrentPmpConnections	1.3.6.1.4.1.562.36.2.1.114.96.2.13.1.7	Gauge32	read-only	This attribute indicates the number of currently active point-to- multipoint connections.
G32 mscAtmIfPnniSigPeakPmpConnections	1.3.6.1.4.1.562.36.2.1.114.96.2.13.1.8	Gauge32	read-only	This attribute indicates the high water mark of active point-to- multipoint connections.
C32 mscAtmIfPnniSigSuccessfulPmpConnections	1.3.6.1.4.1.562.36.2.1.114.96.2.13.1.9	Counter32	read-only	This attribute counts the total number of switched point-to- multipoint connections that were successfully established. The counter wraps to 0 when the maximum value is exceeded.
C32 mscAtmIfPnniSigFailedPmpConnections	1.3.6.1.4.1.562.36.2.1.114.96.2.13.1.10	Counter32	read-only	This attribute counts the number of switched point-to- multipoint connections that were not successfully established.The counter wraps to 0 when the maximum value is exceeded.
G32 mscAtmIfPnniSigNewCurrentConnections	1.3.6.1.4.1.562.36.2.1.114.96.2.13.1.11	Gauge32	read-only	This attribute indicates the total number of currently active point-to- point and point-to-multipoint connections.
mscAtmIfPnniRcc	1.3.6.1.4.1.562.36.2.1.114.96.3
mscAtmIfPnniRccRowStatusTable	1.3.6.1.4.1.562.36.2.1.114.96.3.1		not-accessible	This entry controls the addition and deletion of mscAtmIfPnniRcc components.
mscAtmIfPnniRccRowStatusEntry	1.3.6.1.4.1.562.36.2.1.114.96.3.1.1		not-accessible	A single entry in the table represents a single mscAtmIfPnniRcc component.
ROW mscAtmIfPnniRccRowStatus	1.3.6.1.4.1.562.36.2.1.114.96.3.1.1.1	RowStatus	read-only	This variable is used as the basis for SNMP naming of mscAtmIfPnniRcc components. These components cannot be added nor deleted.
STR mscAtmIfPnniRccComponentName	1.3.6.1.4.1.562.36.2.1.114.96.3.1.1.2	DisplayString	read-only	This variable provides the component's string name for use with the ASCII Console Interface
STO mscAtmIfPnniRccStorageType	1.3.6.1.4.1.562.36.2.1.114.96.3.1.1.4	StorageType	read-only	This variable represents the storage type value for the mscAtmIfPnniRcc tables.
NON mscAtmIfPnniRccIndex	1.3.6.1.4.1.562.36.2.1.114.96.3.1.1.10	NonReplicated	not-accessible	This variable represents the index for the mscAtmIfPnniRcc tables.
mscAtmIfPnniRccVcd	1.3.6.1.4.1.562.36.2.1.114.96.3.2
mscAtmIfPnniRccVcdRowStatusTable	1.3.6.1.4.1.562.36.2.1.114.96.3.2.1		not-accessible	This entry controls the addition and deletion of mscAtmIfPnniRccVcd components.
mscAtmIfPnniRccVcdRowStatusEntry	1.3.6.1.4.1.562.36.2.1.114.96.3.2.1.1		not-accessible	A single entry in the table represents a single mscAtmIfPnniRccVcd component.
ROW mscAtmIfPnniRccVcdRowStatus	1.3.6.1.4.1.562.36.2.1.114.96.3.2.1.1.1	RowStatus	read-write	This variable is used as the basis for SNMP naming of mscAtmIfPnniRccVcd components. These components can be added and deleted.
STR mscAtmIfPnniRccVcdComponentName	1.3.6.1.4.1.562.36.2.1.114.96.3.2.1.1.2	DisplayString	read-only	This variable provides the component's string name for use with the ASCII Console Interface
STO mscAtmIfPnniRccVcdStorageType	1.3.6.1.4.1.562.36.2.1.114.96.3.2.1.1.4	StorageType	read-only	This variable represents the storage type value for the mscAtmIfPnniRccVcd tables.
NON mscAtmIfPnniRccVcdIndex	1.3.6.1.4.1.562.36.2.1.114.96.3.2.1.1.10	NonReplicated	not-accessible	This variable represents the index for the mscAtmIfPnniRccVcd tables.
mscAtmIfPnniRccVcdProvTable	1.3.6.1.4.1.562.36.2.1.114.96.3.2.10		not-accessible	This group contains the provisionable traffic attributes for a control channel.
mscAtmIfPnniRccVcdProvEntry	1.3.6.1.4.1.562.36.2.1.114.96.3.2.10.1		not-accessible	An entry in the mscAtmIfPnniRccVcdProvTable.
INT mscAtmIfPnniRccVcdTrafficDescType	1.3.6.1.4.1.562.36.2.1.114.96.3.2.10.1.1	INTEGER	read-write	This attribute specifies the type of traffic management which is applied to both the transmit and receive direction of this connection as defined in the ATM Forum. The trafficDescType determines the number and meaning of the parameters in the trafficDescParm attribute.
INT mscAtmIfPnniRccVcdAtmServiceCategory	1.3.6.1.4.1.562.36.2.1.114.96.3.2.10.1.3	INTEGER	read-write	This attribute specifies the ATM service category for both directions of the connection. The constantBitRate service category is intended for real time applications, that is those requiring tightly constrained delay and delay variation, as would be appropriate for voice and video applications. The consistent availability of a fixed quantity of bandwidth is considered appropriate for CBR service. Cells which are delayed beyond the value specified by CellTransfer Delay are assumed to be of significantly reduce value to the application. The rtVariableBitRate service category is intended for real time applications, that is those requiring tightly constrained delay and delay variation, as would be appropriate for voice and video applications. Sources are expected to transmit at a rate which varies with time. Equivalently, the source can be described as 'bursty'. Cells which are delayed beyond the value specified by CTD are assumed to be of significantly reduced value to the application. Real time VBR service may support statistical multiplexing of real time sources. The nrtVariableBitRate service category is intended for non-real time applications which have bursty traffic characteristics and which can be characterized in terms of a PCR, SCR, and MBS. For those cells which are transferred within the traffic contract, the application expects a low cell loss ratio. For all connections, it expects a bound on the mean cell transfer delay. Non-real time VBR service may support statistical multiplexing of connections. The unspecifiedBitRate service is intended for non-real time applications; that is, those not requiring tightly constrained delay and delay variation. UBR sources are expected to be bursty. UBR service supports a high degree of statistical multiplexing among sources. UBR service does not specify traffic related service guarantees. No numerical commitments are made with respect to the cell loss ratio experienced by a UBR connection, or as to the cell transfer delay experienced by cells on the connection.
U32 mscAtmIfPnniRccVcdWeight	1.3.6.1.4.1.562.36.2.1.114.96.3.2.10.1.4	Unsigned32	read-write	This attribute specifies an override for the weight of this unshaped connection. This attribute is ignored for shaped connections, for ABR connections, for connections on a CQC-based ATM FP and basic VPTs. When the value is set to sameAsCa, the weight is determined by the weight policy attribute under the CA service category component for all but standard VPT VCCs. For standard VPT VCCs, the weight is determined by the VCC's service category, when the value is set to sameAsCa. When this attribute is set to a value from 1 to 4095, that value is used for the weight policy of this connection relative to other connections. For all but standard VPT VCCs, weight policy determines the proportion of transit cell opportunities which are allocated to this connection, compared to other connections in the same service category. For standard VPT VCCs, weight policy determines the proportion of transmit cell opportunities which are allocated to this connection, compared to other connections associated with the VPT. When the value is set to upToQueueLimit, the weight policy is limited only by the txQueueLimit. VALUES ( 0 = upToQueueLimit 65535 = sameAsCa )
INT mscAtmIfPnniRccVcdQosClass	1.3.6.1.4.1.562.36.2.1.114.96.3.2.10.1.21	INTEGER	read-write	This attribute specifies the quality of service for both the forward and backward direction for this connection. Class 1 supports a QOS that meets Service Class A performance requirements (Circuit emulation, constant bit rate video). Class 2 supports a QOS that meets Service Class B performance requirements (Variable bit rate audio and video). Class 3 supports a QOS that meets Service Class C performance requirements (Connection-Oriented Data Transfer). Class 4 supports a QOS that meets Service Class D performance requirements (Connectionless Data Transfer). Class 0 is the unspecified bit rate QOS class; no objective is specified for the performance parameters.
INT mscAtmIfPnniRccVcdTrafficShaping	1.3.6.1.4.1.562.36.2.1.114.96.3.2.10.1.50	INTEGER	read-write	This attribute specifies whether this connection uses traffic shaping when transmitting traffic to the ATM interface. When sameAsCa is selected, traffic shaping for this connection is based on the trafficShaping attribute of the connection's service category component under the AtmIf CA. If the service category has traffic shaping enabled, then traffic shaping is enabled for the connection. Note that enabling traffic shaping may have no effect under certain cases. These cases are listed in the description of the trafficShaping operational attribute, which is under the Vcc Tm and Vpc Tm components. When disabled is selected, traffic shaping for this connection is disabled.
INT mscAtmIfPnniRccVcdUnshapedTransmitQueueing	1.3.6.1.4.1.562.36.2.1.114.96.3.2.10.1.60	INTEGER	read-write	This attribute only applies when this connection is unshaped. This attribute specifies the transmit queueing method for this connection if it is unshaped. Refer to the unshapedTransmitQueueing attribute under the AtmIf CA service category subcomponent for more details on the meaning of this attribute. When this attribute is set to sameAsCa, the transmit queueing method for the connection is based on the unshapedTransmitQueueing attribute of the connection's service category component under the ConnectionAdministrator. When this attribute is set to common, transmit traffic on this unshaped connection is destined for the common queue. The value sameAsInterface is for migration from previous software releases, but should no longer be used
INT mscAtmIfPnniRccVcdUsageParameterControl	1.3.6.1.4.1.562.36.2.1.114.96.3.2.10.1.70	INTEGER	read-write	This attribute specifies whether this connection enforces usage parameter control when receiving traffic from the ATM interface. When sameAsCa is selected, UPC for the connection is based on the usageParameterControl attribute of the connection's service category component under the ConnectionAdministrator. If the service category has UPC enabled, then UPC is enabled for the connection. Note that enabling UPC may have no effect under certain cases. These cases are listed in the description of the usageParameterControl operational attribute, which is under the Vcc Tm or Vpc Tm component. When disabled is selected, UPC for this connection is disabled. The value sameAsInterface is for migration from previous software releases, but should no longer be used
mscAtmIfPnniRccVcdTdpTable	1.3.6.1.4.1.562.36.2.1.114.96.3.2.387		not-accessible	This attribute is a vector of five traffic parameters whose meanings are defined by the trafficDescType attribute. The values of peak cell rate (PCR), sustained cell rate (SCR) and requested shaping rate are expressed in cell/s. Maximum burst size (MBS) is expressed in cells. CDVT is expressed in microseconds. The values of PCR, SCR, MBS and CDVT are used for connection admission control (CAC). The value of CDVT is only used for connections where the atmServiceCategory is constantBitRate. For all other values of atmServiceCategory, CDVT is ignored. The values of PCR, SCR and requested shaping rate are used to determine the actual shaping rate where traffic shaping is enabled. When trafficDescType is 3, parameter 1 represents the PCR for CLP equal to 0 and 1 traffic; parameter 4 represents the CDVT; and parameter 5 represents the requested shaping rate. A non-zero value in parameter 5 overrides any value in parameter 1. This result is used as the PCR. Parameter 1 must be non-zero. Parameters 2 and 3 must be zero. When trafficDescType is 6, parameter 1 represents the PCR for CLP equal to 0 and 1 traffic; parameter 2 represents the SCR for CLP equal to 0 and 1 traffic; parameter 3 represents the MBS for CLP equal to 0 and 1 traffic; parameter 4 represents the CDVT; and parameter 5 represents the requested shaping rate. A non-zero value in parameter 5 overrides any value in parameter 1. This result is used as the PCR. Parameters 1, 2, and 3 must be non-zero. Parameter 1 must be greater than or equal to parameter 2. Parameter 5 must either be zero (unused) or greater than or equal to parameter 2. When trafficDescType is 7, parameter 1 represents the PCR for CLP equal to 0 and 1 traffic; parameter 2 represents the SCR for CLP equal to 0 with cell discard; parameter 3 represents the MBS for CLP equal to 0 traffic; parameter 4 represents the CDVT; and parameter 5 represents the requested shaping rate. A non-zero value in parameter 5 overrides any value in parameter 1. This result is used as the PCR. Parameters 1, 2, and 3 must be non-zero. Parameter 1 must be greater than or equal to parameter 2. Parameter 5 must either be zero (unused) or greater than or equal to parameter 2. When trafficDescType is 8, parameter 1 represents the PCR for CLP equal to 0 and 1 traffic; parameter 2 represents the SCR for CLP equal to 0 traffic with cell tagging; parameter 3 represents the MBS for CLP equal to 0 traffic; parameter 4 represents the CDVT; and parameter 5 represents the requested shaping rate. A non-zero value in parameter 5 overrides any value in parameter 1. This result is used as the PCR. Parameters 1, 2, and 3 must be non-zero. Parameter 1 must be greater than or equal to parameter 2. Parameter 5 must either be zero (unused) or greater than or equal to parameter 2. Whenever it is valid for PCR to be specified, parameter 5 may also be used to specify a requested shaping rate. A non-zero value in parameter 5 overrides the value in parameter 1 and is used as the peak cell rate in calculations of CAC and shaping rate. For trafficDescType 3 the traffic is shaped at the next rate less than the PCR. For trafficDescType 6, 7, and 8, the traffic is shaped at the highest available rate which is between PCR and SCR. However, if there is no available shaping rate between PCR and SCR, traffic is shaped at the next rate above the PCR.
mscAtmIfPnniRccVcdTdpEntry	1.3.6.1.4.1.562.36.2.1.114.96.3.2.387.1		not-accessible	An entry in the mscAtmIfPnniRccVcdTdpTable.
I32 mscAtmIfPnniRccVcdTdpIndex	1.3.6.1.4.1.562.36.2.1.114.96.3.2.387.1.1	Integer32	not-accessible	This variable represents the mscAtmIfPnniRccVcdTdpTable specific index for the mscAtmIfPnniRccVcdTdpTable.
U32 mscAtmIfPnniRccVcdTdpValue	1.3.6.1.4.1.562.36.2.1.114.96.3.2.387.1.2	Unsigned32	read-write	This variable represents an individual value for the mscAtmIfPnniRccVcdTdpTable.
mscAtmIfPnniRccProvTable	1.3.6.1.4.1.562.36.2.1.114.96.3.10		not-accessible	This group contains the generic provisionable attributes of an Rcc component.
mscAtmIfPnniRccProvEntry	1.3.6.1.4.1.562.36.2.1.114.96.3.10.1		not-accessible	An entry in the mscAtmIfPnniRccProvTable.
U32 mscAtmIfPnniRccVci	1.3.6.1.4.1.562.36.2.1.114.96.3.10.1.1	Unsigned32	read-write	This attribute specifies the VCI for the Routing Control Channel (RCC). It is not recommended that the value be changed from the default of 18 unless absolutely necessary. If a different VCI is specified, ensure that the RCC at the far end is provisioned to use the same VCI, otherwise the RCC will not come up.
mscAtmIfPnniRccHlParmsTable	1.3.6.1.4.1.562.36.2.1.114.96.3.11		not-accessible	This group contains the provisionable Hello protocol parameters for an Rcc component.
mscAtmIfPnniRccHlParmsEntry	1.3.6.1.4.1.562.36.2.1.114.96.3.11.1		not-accessible	An entry in the mscAtmIfPnniRccHlParmsTable.
NUM mscAtmIfPnniRccHelloHoldDown	1.3.6.1.4.1.562.36.2.1.114.96.3.11.1.1	FixedPoint1	read-write	This attribute is used to limit the rate at which this node sends out Hello packets. Specifically, it specifies the minimum time between successive Hellos. A value of 0 specifies that the value provisioned for the helloHoldDown attribute of the ARtg Pnni component should be used.
U32 mscAtmIfPnniRccHelloInterval	1.3.6.1.4.1.562.36.2.1.114.96.3.11.1.2	Unsigned32	read-write	This attribute specifies the duration of the Hello Timer. Every helloInterval seconds, this node will send out a Hello packet to the neighbor node, subject to the helloHoldDown timer having expired at least once since the last Hello packet was sent. A value of 0 specifies that the value provisioned for the helloInterval attribute of the ARtg Pnni component should be used.
U32 mscAtmIfPnniRccHelloInactivityFactor	1.3.6.1.4.1.562.36.2.1.114.96.3.11.1.3	Unsigned32	read-write	This attribute specifies the number of Hello intervals allowed to pass without receiving a Hello from the neighbor node, before an attempt is made to re-stage. The hello inactivity timer is enabled in the oneWayInside, twoWayInside, oneWayOutside, twoWayOutside and commonOutside hello states (see the helloState attribute on the Rcc component for a description of these states). Note that the value for the Hello interval used in the calculation is the one specified in the Hello packet from the neighbor node. A value of 0 specifies that the value provisioned for the helloInactivityFactor attribute of the ARtg Pnni component should be used. DESCRIPTION
mscAtmIfPnniRccStateTable	1.3.6.1.4.1.562.36.2.1.114.96.3.12		not-accessible	This group contains the three OSI State attributes. The descriptions generically indicate what each state attribute implies about the component. Note that not all the values and state combinations described here are supported by every component which uses this group. For component-specific information and the valid state combinations, refer to NTP 241-7001-150, Passport Operations and Maintenance Guide.
mscAtmIfPnniRccStateEntry	1.3.6.1.4.1.562.36.2.1.114.96.3.12.1		not-accessible	An entry in the mscAtmIfPnniRccStateTable.
INT mscAtmIfPnniRccAdminState	1.3.6.1.4.1.562.36.2.1.114.96.3.12.1.1	INTEGER	read-only	This attribute indicates the OSI Administrative State of the component. The value locked indicates that the component is administratively prohibited from providing services for its users. A Lock or Lock - force command has been previously issued for this component. When the value is locked, the value of usageState must be idle. The value shuttingDown indicates that the component is administratively permitted to provide service to its existing users only. A Lock command was issued against the component and it is in the process of shutting down. The value unlocked indicates that the component is administratively permitted to provide services for its users. To enter this state, issue an Unlock command to this component.
INT mscAtmIfPnniRccOperationalState	1.3.6.1.4.1.562.36.2.1.114.96.3.12.1.2	INTEGER	read-only	This attribute indicates the OSI Operational State of the component. The value enabled indicates that the component is available for operation. Note that if adminState is locked, it would still not be providing service. The value disabled indicates that the component is not available for operation. For example, something is wrong with the component itself, or with another component on which this one depends. If the value is disabled, the usageState must be idle.
INT mscAtmIfPnniRccUsageState	1.3.6.1.4.1.562.36.2.1.114.96.3.12.1.3	INTEGER	read-only	This attribute indicates the OSI Usage State of the component. The value idle indicates that the component is not currently in use. The value active indicates that the component is in use and has spare capacity to provide for additional users. The value busy indicates that the component is in use and has no spare operating capacity for additional users at this time.
mscAtmIfPnniRccOperTable	1.3.6.1.4.1.562.36.2.1.114.96.3.13		not-accessible	This group contains the operational attributes for an Rcc component.
mscAtmIfPnniRccOperEntry	1.3.6.1.4.1.562.36.2.1.114.96.3.13.1		not-accessible	An entry in the mscAtmIfPnniRccOperTable.
INT mscAtmIfPnniRccType	1.3.6.1.4.1.562.36.2.1.114.96.3.13.1.1	INTEGER	read-only	This attribute indicates the role of this link in the PNNI hierarchy. The following values are possible: unknown: the Hello protocol has not yet determined the role of the link. lowestLevelHorizLink: the link is a horizontal link between two lowest level nodes. lowestLevelOutsideLink: the link is an outside link between two border nodes. horizontalLinkToLgn: the link is a horizontal link to a Logical Group Node (LGN). uplink: the link is a uplink to a higher level LGN.
INT mscAtmIfPnniRccNegotiatedVersion	1.3.6.1.4.1.562.36.2.1.114.96.3.13.1.2	INTEGER	read-only	This attribute indicates the PNNI version negotiated with the neighbor node.
INT mscAtmIfPnniRccHelloState	1.3.6.1.4.1.562.36.2.1.114.96.3.13.1.3	INTEGER	read-only	This attribute indicates the state of the Hello protocol exchange over this link. The following are the possible values for this attribute: down: the link is down; no PNNI routing packets will be sent over or received over such a link. This is the initial state of the Hello Finite State Machine, and can also be reached when lower-level protocols have indicated that the link is not usable. attempt: no Hello packets or Hello packets, with mismatch information, have been received recently from the neighbor. Attempts are made to contact the neighbor node by sending out Hello packets every helloInterval seconds. oneWayInside: Hello packets have been recently received from the neighbor and it has been established that both nodes are members of the same peer group, but the remote node ID and remote port ID in the neighbor's Hello packets were set to zero. A Hello packet is sent to the neighbor and the Hello timer is restarted. twoWayInside: Bidirectional communication over this link between this node and the neighbor node has been achieved. oneWayOutside: Hello packets have been recently received from the neighbor and it has been established that both nodes are members of a different peer group, but the remote node ID and remote port ID in the neighbor's Hello packets were set to zero. twoWayOutside: Hellos have recently been received from the neighbor indicating that the neighbor node belongs to a different peer group. The correct remote node ID and remote port ID fields were included in the Hello packet, but the nodal hierarchy list did not include any common peer group. This state can also be reached if a hierarchy mismatch occurs while in the commonOutside state. commonOutside: A common level of the routing hierarchy has been found, in addition to achieving full bi-directional communication between the two nodes.
STR mscAtmIfPnniRccRemoteNodeId	1.3.6.1.4.1.562.36.2.1.114.96.3.13.1.4	HexString	read-only	This attribute indicates the neighbor node's node id.
U32 mscAtmIfPnniRccRemotePortId	1.3.6.1.4.1.562.36.2.1.114.96.3.13.1.5	Unsigned32	read-only	This attribute indicates the neighbor node's port id.
mscAtmIfPnniRccStatsTable	1.3.6.1.4.1.562.36.2.1.114.96.3.14		not-accessible	This group contains the statistical attributes for an Rcc component.
mscAtmIfPnniRccStatsEntry	1.3.6.1.4.1.562.36.2.1.114.96.3.14.1		not-accessible	An entry in the mscAtmIfPnniRccStatsTable.
C32 mscAtmIfPnniRccHelloPacketsRx	1.3.6.1.4.1.562.36.2.1.114.96.3.14.1.1	Counter32	read-only	This attribute counts the total number of Hello packets received across this RCC, including bad and mismatched Hello packets. The counter wraps when it exceeds the maximum value.
C32 mscAtmIfPnniRccHelloPacketsTx	1.3.6.1.4.1.562.36.2.1.114.96.3.14.1.2	Counter32	read-only	This attribute counts the total number of Hello packets transmitted across this RCC. The counter wraps when it exceeds the maximum value.
C32 mscAtmIfPnniRccMismatchedHelloPacketsRx	1.3.6.1.4.1.562.36.2.1.114.96.3.14.1.3	Counter32	read-only	This attribute counts the total number of mismatched Hello packets received over this RCC. The counter wraps when it exceeds the maximum value.
C32 mscAtmIfPnniRccBadHelloPacketsRx	1.3.6.1.4.1.562.36.2.1.114.96.3.14.1.4	Counter32	read-only	This attribute counts the total number of bad Hello packets received over this RCC. The counter wraps when it exceeds the maximum value.
mscAtmIfPnniAddr	1.3.6.1.4.1.562.36.2.1.114.96.4
mscAtmIfPnniAddrRowStatusTable	1.3.6.1.4.1.562.36.2.1.114.96.4.1		not-accessible	This entry controls the addition and deletion of mscAtmIfPnniAddr components.
mscAtmIfPnniAddrRowStatusEntry	1.3.6.1.4.1.562.36.2.1.114.96.4.1.1		not-accessible	A single entry in the table represents a single mscAtmIfPnniAddr component.
ROW mscAtmIfPnniAddrRowStatus	1.3.6.1.4.1.562.36.2.1.114.96.4.1.1.1	RowStatus	read-write	This variable is used as the basis for SNMP naming of mscAtmIfPnniAddr components. These components can be added and deleted.
STR mscAtmIfPnniAddrComponentName	1.3.6.1.4.1.562.36.2.1.114.96.4.1.1.2	DisplayString	read-only	This variable provides the component's string name for use with the ASCII Console Interface
STO mscAtmIfPnniAddrStorageType	1.3.6.1.4.1.562.36.2.1.114.96.4.1.1.4	StorageType	read-only	This variable represents the storage type value for the mscAtmIfPnniAddr tables.
STR mscAtmIfPnniAddrAddressIndex	1.3.6.1.4.1.562.36.2.1.114.96.4.1.1.10	AsciiStringIndex	not-accessible	This variable represents an index for the mscAtmIfPnniAddr tables.
INT mscAtmIfPnniAddrAddressTypeIndex	1.3.6.1.4.1.562.36.2.1.114.96.4.1.1.11	INTEGER	not-accessible	This variable represents an index for the mscAtmIfPnniAddr tables.
mscAtmIfPnniAddrTermSP	1.3.6.1.4.1.562.36.2.1.114.96.4.2
mscAtmIfPnniAddrTermSPRowStatusTable	1.3.6.1.4.1.562.36.2.1.114.96.4.2.1		not-accessible	This entry controls the addition and deletion of mscAtmIfPnniAddrTermSP components.
mscAtmIfPnniAddrTermSPRowStatusEntry	1.3.6.1.4.1.562.36.2.1.114.96.4.2.1.1		not-accessible	A single entry in the table represents a single mscAtmIfPnniAddrTermSP component.
ROW mscAtmIfPnniAddrTermSPRowStatus	1.3.6.1.4.1.562.36.2.1.114.96.4.2.1.1.1	RowStatus	read-write	This variable is used as the basis for SNMP naming of mscAtmIfPnniAddrTermSP components. These components can be added and deleted.
STR mscAtmIfPnniAddrTermSPComponentName	1.3.6.1.4.1.562.36.2.1.114.96.4.2.1.1.2	DisplayString	read-only	This variable provides the component's string name for use with the ASCII Console Interface
STO mscAtmIfPnniAddrTermSPStorageType	1.3.6.1.4.1.562.36.2.1.114.96.4.2.1.1.4	StorageType	read-only	This variable represents the storage type value for the mscAtmIfPnniAddrTermSP tables.
NON mscAtmIfPnniAddrTermSPIndex	1.3.6.1.4.1.562.36.2.1.114.96.4.2.1.1.10	NonReplicated	not-accessible	This variable represents the index for the mscAtmIfPnniAddrTermSP tables.
mscAtmIfPnniAddrPnniInfo	1.3.6.1.4.1.562.36.2.1.114.96.4.3
mscAtmIfPnniAddrPnniInfoRowStatusTable	1.3.6.1.4.1.562.36.2.1.114.96.4.3.1		not-accessible	This entry controls the addition and deletion of mscAtmIfPnniAddrPnniInfo components.
mscAtmIfPnniAddrPnniInfoRowStatusEntry	1.3.6.1.4.1.562.36.2.1.114.96.4.3.1.1		not-accessible	A single entry in the table represents a single mscAtmIfPnniAddrPnniInfo component.
ROW mscAtmIfPnniAddrPnniInfoRowStatus	1.3.6.1.4.1.562.36.2.1.114.96.4.3.1.1.1	RowStatus	read-write	This variable is used as the basis for SNMP naming of mscAtmIfPnniAddrPnniInfo components. These components can be added and deleted.
STR mscAtmIfPnniAddrPnniInfoComponentName	1.3.6.1.4.1.562.36.2.1.114.96.4.3.1.1.2	DisplayString	read-only	This variable provides the component's string name for use with the ASCII Console Interface
STO mscAtmIfPnniAddrPnniInfoStorageType	1.3.6.1.4.1.562.36.2.1.114.96.4.3.1.1.4	StorageType	read-only	This variable represents the storage type value for the mscAtmIfPnniAddrPnniInfo tables.
NON mscAtmIfPnniAddrPnniInfoIndex	1.3.6.1.4.1.562.36.2.1.114.96.4.3.1.1.10	NonReplicated	not-accessible	This variable represents the index for the mscAtmIfPnniAddrPnniInfo tables.
mscAtmIfPnniAddrPnniInfoProvTable	1.3.6.1.4.1.562.36.2.1.114.96.4.3.10		not-accessible	This attribute group contains the provisioned attributes relating to PNNI for a PnniInfo component.
mscAtmIfPnniAddrPnniInfoProvEntry	1.3.6.1.4.1.562.36.2.1.114.96.4.3.10.1		not-accessible	An entry in the mscAtmIfPnniAddrPnniInfoProvTable.
INT mscAtmIfPnniAddrPnniInfoScope	1.3.6.1.4.1.562.36.2.1.114.96.4.3.10.1.1	INTEGER	read-write	This attribute specifies the scope of the ATM address, which is the highest level up to which this address will be advertised in the PNNI hierarchy. The scope must be set to a value numerically less than or equal to the level of the lowest level peer group containing this node. Setting the scope to 0 will cause the address to be advertised globally within this PNNI routing domain.
INT mscAtmIfPnniAddrPnniInfoReachability	1.3.6.1.4.1.562.36.2.1.114.96.4.3.10.1.2	INTEGER	read-write	This attribute indicates whether the address is internal or exterior. An internal reachable address is an address of a destination that is directly attached to the logical node advertising the address. An exterior reachable address is an address that can be reached through a PNNI routing domain, but which is not located in that PNNI routing domain.
mscAtmIfPnniAddrOperTable	1.3.6.1.4.1.562.36.2.1.114.96.4.10		not-accessible	This attribute group contains the operational attributes for the Address component.
mscAtmIfPnniAddrOperEntry	1.3.6.1.4.1.562.36.2.1.114.96.4.10.1		not-accessible	An entry in the mscAtmIfPnniAddrOperTable.
INT mscAtmIfPnniAddrScope	1.3.6.1.4.1.562.36.2.1.114.96.4.10.1.1	INTEGER	read-only	This attribute indicates the scope of the ATM address, which is the highest level to which this address will be advertised in the PNNI hierarchy. If no PnniInfo subcomponent has been provisioned, then the scope will default to the level of this node in the PNNI hierarchy. If this node does not participate in a PNNI hierarchy, then this attribute will have the value of -1.
INT mscAtmIfPnniAddrReachability	1.3.6.1.4.1.562.36.2.1.114.96.4.10.1.2	INTEGER	read-only	This attribute indicates whether the address is internal or exterior. An internal reachable address is an address of a destination that is directly attached to the logical node advertising the address. An exterior reachable address is an address that can be reached through a PNNI routing domain, but which is not located in that PNNI routing domain.
mscAtmIfPnniProvTable	1.3.6.1.4.1.562.36.2.1.114.96.10		not-accessible	This group contains the provisionable attributes for the Pnni component.
mscAtmIfPnniProvEntry	1.3.6.1.4.1.562.36.2.1.114.96.10.1		not-accessible	An entry in the mscAtmIfPnniProvTable.
U32 mscAtmIfPnniSoftPvcRetryPeriod	1.3.6.1.4.1.562.36.2.1.114.96.10.1.1	Unsigned32	read-write	This attribute represents the time in seconds to wait between call setup retries. The resolution is to the nearest 10 seconds. This attribute has been obsoleted and is replaced by the softPvpAndPvcRetryPeriod attribute.
U32 mscAtmIfPnniSoftPvpAndPvcRetryPeriod	1.3.6.1.4.1.562.36.2.1.114.96.10.1.2	Unsigned32	read-write	This attribute represents the time in seconds to wait between soft PVP or soft PVC call setup retries. The resolution is to the nearest 10 seconds.
U32 mscAtmIfPnniSoftPvpAndPvcHoldOffTime	1.3.6.1.4.1.562.36.2.1.114.96.10.1.5	Unsigned32	read-write	This attribute specifies how long to hold off retries following a release or the connection. The resolution is to the nearest 50 ms.
mscAtmIfPnniAdminWeightsTable	1.3.6.1.4.1.562.36.2.1.114.96.11		not-accessible	This group contains the provisionable administrative weights for the Pnni component. These weights will be used by Generic Connection Admission Control (GCAC) if administrative weight is the selected optimization criterion.
mscAtmIfPnniAdminWeightsEntry	1.3.6.1.4.1.562.36.2.1.114.96.11.1		not-accessible	An entry in the mscAtmIfPnniAdminWeightsTable.
U32 mscAtmIfPnniCbrWeight	1.3.6.1.4.1.562.36.2.1.114.96.11.1.1	Unsigned32	read-write	This attribute specifies the administrative weight assigned for setting up switched calls with a service category of Constant Bit Rate (CBR) for this PNNI interface. The value specified will be used by Generic Connection Admission Control (GCAC) if administrative weight is the selected optimization criterion; the higher the value, the less desirable the link will be in path selection.
U32 mscAtmIfPnniRtVbrWeight	1.3.6.1.4.1.562.36.2.1.114.96.11.1.2	Unsigned32	read-write	This attribute specifies the administrative weight assigned for setting up switched calls with a service category of Real-Time Variable Bit Rate (RT-VBR) for this PNNI interface. The value specified will be used by Generic Connection Admission Control (GCAC) if administrative weight is the selected optimization criterion; the higher the value, the less desirable the link will be in path selection.
U32 mscAtmIfPnniNrtVbrWeight	1.3.6.1.4.1.562.36.2.1.114.96.11.1.3	Unsigned32	read-write	This attribute specifies the administrative weight assigned for setting up switched calls with a service category of Non Real-Time Variable Bit Rate (NRT-VBR) for this PNNI interface. The value specified will be used by Generic Connection Admission Control (GCAC) if administrative weight is the selected optimization criterion; the higher the value, the less desirable the link will be in path selection.
U32 mscAtmIfPnniUbrWeight	1.3.6.1.4.1.562.36.2.1.114.96.11.1.4	Unsigned32	read-write	This attribute specifies the administrative weight assigned for setting up switched calls with a service category of Unspecified Bit Rate (UBR) for this PNNI interface. The value specified will be used by Generic Connection Admission Control (GCAC) if administrative weight is the selected optimization criterion; the higher the value, the less desirable the link will be in path selection.
mscAtmIfPnniAcctOptTable	1.3.6.1.4.1.562.36.2.1.114.96.12		not-accessible	This group contains the provisionable attributes for accounting.
mscAtmIfPnniAcctOptEntry	1.3.6.1.4.1.562.36.2.1.114.96.12.1		not-accessible	An entry in the mscAtmIfPnniAcctOptTable.
OCT mscAtmIfPnniAccountCollection	1.3.6.1.4.1.562.36.2.1.114.96.12.1.1	OCTET STRING	read-write	This attribute is used to turn accounting on or off for SVC and SPVC connections. It also specifies the reason(s) for which accounting data is collected: billing, test, study, audit, or force. If the set of reasons is not empty then accounting records will be generated by this interface in the following situations: - on a TODA changeover if TODA is enabled; - every 12 hours (per connection) if TODA is disabled; - on every call clear (a call record with final cell counts). If none of the reasons is present, then accounting will be suppressed. The reason for collection is recorded in the accounting record, in the attribute callingCollectReason or calledCollectReason as appropriate. Description of bits: bill(0) test(1) study(2) audit(3) force(4)
INT mscAtmIfPnniAccountConnectionType	1.3.6.1.4.1.562.36.2.1.114.96.12.1.2	INTEGER	read-write	This attribute specifies whether accounting records generated by this interface should be marked as originating, terminating or intermediate. This attribute, in combination with the direction of the call, determines the value of attribute connPointType of the accounting record and may be used by downstream accounting processes to correlate the records. If the value is origTerm then records generated for incoming calls will be marked as originating and records generated for outgoing calls will be marked as terminating. If the value is intermediate then records generated for all calls will be marked as intermediate.
U32 mscAtmIfPnniAccountClass	1.3.6.1.4.1.562.36.2.1.114.96.12.1.3	Unsigned32	read-write	This attribute specifies the accounting class associated with the interface. Its meaning is determined by the network operator. Its value is simply recorded in the accounting records generated by this interface, in the attribute callingServiceType or calledServiceType as appropriate.
U32 mscAtmIfPnniServiceExchange	1.3.6.1.4.1.562.36.2.1.114.96.12.1.4	Unsigned32	read-write	This attribute specifies the data service exchange associated with this interface. Its meaning is determined by the network operator. Its value is simply recorded in the accounting records generated by this interface, in the attribute callingDse or calledDse as appropriate.
mscAtmIfPnniOperationalTable	1.3.6.1.4.1.562.36.2.1.114.96.13		not-accessible	This group contains the operational attributes for a Pnni component.
mscAtmIfPnniOperationalEntry	1.3.6.1.4.1.562.36.2.1.114.96.13.1		not-accessible	An entry in the mscAtmIfPnniOperationalTable.
U32 mscAtmIfPnniPortId	1.3.6.1.4.1.562.36.2.1.114.96.13.1.1	Unsigned32	read-only	This attribute indicates the port id of the PNNI interface, which is the parent AtmIf's instance number.
atmPnniMIB	1.3.6.1.4.1.562.36.2.2.72
atmPnniGroup	1.3.6.1.4.1.562.36.2.2.72.1
atmPnniGroupCA	1.3.6.1.4.1.562.36.2.2.72.1.1
atmPnniGroupCA02	1.3.6.1.4.1.562.36.2.2.72.1.1.3
atmPnniGroupCA02A	1.3.6.1.4.1.562.36.2.2.72.1.1.3.2
atmPnniCapabilities	1.3.6.1.4.1.562.36.2.2.72.3
atmPnniCapabilitiesCA	1.3.6.1.4.1.562.36.2.2.72.3.1
atmPnniCapabilitiesCA02	1.3.6.1.4.1.562.36.2.2.72.3.1.3
atmPnniCapabilitiesCA02A	1.3.6.1.4.1.562.36.2.2.72.3.1.3.2

RFC description

Manages ATM Private Network-Network Interface (PNNI) virtual path configuration for Nortel carrier equipment.

Start monitoring Nortel MsCarrier/MainStreet Passport ATM switch (PNNI routing) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download Nortel-MsCarrier-MscPassport-AtmPnniMIB

What Is Nortel-MsCarrier-MscPassport-AtmPnniMIB?

Supported Devices

Monitoring Examples

What Can Be Monitored

This MIB depends on

Related MIBs

RFC description