All MIBs › Nortel-MsCarrier-MscPassport-AtmPnniMIB › mscAtmIfVptPnniSigVcdTrafficShaping
mscAtmIfVptPnniSigVcdTrafficShaping
Module: Nortel-MsCarrier-MscPassport-AtmPnniMIB
OID (symbolic): Nortel-MsCarrier-MscPassport-AtmPnniMIB::mscAtmIfVptPnniSigVcdTrafficShaping
OID (numeric): 1.3.6.1.4.1.562.36.2.1.114.9.7.2.2.10.1.50
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: This attribute specifies whether this connection uses traffic shaping when transmitting traffic to the ATM interface.
When sameAsCa is selected, traffic shaping for this connection is based on the trafficShaping attribute of the connection's service category component under the AtmIf CA. If the service category has traffic shaping enabled, then traffic shaping is enabled for the connection. Note that enabling traffic shaping may have no effect under certain cases. These cases are listed in the description of the trafficShaping operational attribute, which is under the Vcc Tm and Vpc Tm components.
When disabled is selected, traffic shaping for this connection is disabled.
What is mscAtmIfVptPnniSigVcdTrafficShaping?
Enables, sameAsCa, or disables, disabled, default, traffic shaping for connections templated by this signalling-channel connection descriptor on a PNNI interface on a virtual path terminator (VPT); sameAsCa inherits the shaping setting from the connection's service-category component under the interface's Connection Administrator. Admins enable shaping to smooth bursty transmit traffic and avoid exceeding contracted rates.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.562.36.2.1.114.9.7.2.2.10.1.50 snmpwalk -v2c -c public <target> Nortel-MsCarrier-MscPassport-AtmPnniMIB::mscAtmIfVptPnniSigVcdTrafficShaping
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.562.36.2.1.114.9.7.2.2.10.1.50.1 snmpget -v2c -c public <target> Nortel-MsCarrier-MscPassport-AtmPnniMIB::mscAtmIfVptPnniSigVcdTrafficShaping.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.562.36.2.1.114.9.7.2.2.10.1.50.1 i <value>
Start monitoring Nortel MsCarrier/MainStreet Passport ATM switch (PNNI routing) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the Nortel-MsCarrier-MscPassport-AtmPnniMIB::mscAtmIfVptPnniSigVcdTrafficShaping OID value, configure state conditions and alerts, and monitor any Nortel MsCarrier/MainStreet Passport ATM switch (PNNI routing) from a single console.
OID Breakdown
Upper-level ancestors (12 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.562 | nortel | CPM-NORTEL-MIB |
| 1.3.6.1.4.1.562.36 | msCarrier | Nortel-MsCarrier-MscPassport-UsefulDefinitionsMIB |
| 1.3.6.1.4.1.562.36.2 | mscPassport | Nortel-MsCarrier-MscPassport-UsefulDefinitionsMIB |
| 1.3.6.1.4.1.562.36.2.1 | mscComponents | Nortel-MsCarrier-MscPassport-UsefulDefinitionsMIB |
| 1.3.6.1.4.1.562.36.2.1.114 | mscAtmIf | Nortel-MsCarrier-MscPassport-AtmCoreMIB |
| 1.3.6.1.4.1.562.36.2.1.114.9 | mscAtmIfVpt | Nortel-MsCarrier-MscPassport-AtmCoreMIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.562.36.2.1.114.9.7 | mscAtmIfVptPnni | Nortel-MsCarrier-MscPassport-AtmPnniMIB |
| 1.3.6.1.4.1.562.36.2.1.114.9.7.2 | mscAtmIfVptPnniSig | Nortel-MsCarrier-MscPassport-AtmPnniMIB |
| 1.3.6.1.4.1.562.36.2.1.114.9.7.2.2 | mscAtmIfVptPnniSigVcd | Nortel-MsCarrier-MscPassport-AtmPnniMIB |
| 1.3.6.1.4.1.562.36.2.1.114.9.7.2.2.10 | mscAtmIfVptPnniSigVcdProvTable | Nortel-MsCarrier-MscPassport-AtmPnniMIB |
| 1.3.6.1.4.1.562.36.2.1.114.9.7.2.2.10.1 | mscAtmIfVptPnniSigVcdProvEntry | Nortel-MsCarrier-MscPassport-AtmPnniMIB |
| 1.3.6.1.4.1.562.36.2.1.114.9.7.2.2.10.1.50 | mscAtmIfVptPnniSigVcdTrafficShaping | Nortel-MsCarrier-MscPassport-AtmPnniMIB |