Nortel-MsCarrier-MscPassport-AtmPnniMIB :: mscAtmIfPnniUbrWeight

MIB Reference — IPNetwork Monitor · Updated October 06, 2026

All MIBs › Nortel-MsCarrier-MscPassport-AtmPnniMIB › mscAtmIfPnniUbrWeight

mscAtmIfPnniUbrWeight

Module: Nortel-MsCarrier-MscPassport-AtmPnniMIB

OID (symbolic): Nortel-MsCarrier-MscPassport-AtmPnniMIB::mscAtmIfPnniUbrWeight

OID (numeric): 1.3.6.1.4.1.562.36.2.1.114.96.11.1.4

Node type: OBJECT-TYPE

Type: Unsigned32

Access: read-write

Description: This attribute specifies the administrative weight assigned for setting up switched calls with a service category of Unspecified Bit Rate (UBR) for this PNNI interface. The value specified will be used by Generic Connection Admission Control (GCAC) if administrative weight is the selected optimization criterion; the higher the value, the less desirable the link will be in path selection.

What is mscAtmIfPnniUbrWeight?

Sets the administrative weight GCAC uses when routing switched calls with Unspecified Bit Rate (UBR) service on a PNNI interface on a regular ATM interface, defaulting to 5040; a higher value makes this link less attractive for UBR path selection. Since UBR carries best-effort traffic, admins often weight it differently from the guaranteed-rate categories to prefer other links for it.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.562.36.2.1.114.96.11.1.4
snmpwalk -v2c -c public <target> Nortel-MsCarrier-MscPassport-AtmPnniMIB::mscAtmIfPnniUbrWeight

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.562.36.2.1.114.96.11.1.4.1
snmpget -v2c -c public <target> Nortel-MsCarrier-MscPassport-AtmPnniMIB::mscAtmIfPnniUbrWeight.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.562.36.2.1.114.96.11.1.4.1 i <value>

Start monitoring Nortel MsCarrier/MainStreet Passport ATM switch (PNNI routing) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the Nortel-MsCarrier-MscPassport-AtmPnniMIB::mscAtmIfPnniUbrWeight OID value, configure state conditions and alerts, and monitor any Nortel MsCarrier/MainStreet Passport ATM switch (PNNI routing) from a single console.

OID Breakdown

Upper-level ancestors (11 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.562nortelCPM-NORTEL-MIB
1.3.6.1.4.1.562.36msCarrierNortel-MsCarrier-MscPassport-UsefulDefinitionsMIB
1.3.6.1.4.1.562.36.2mscPassportNortel-MsCarrier-MscPassport-UsefulDefinitionsMIB
1.3.6.1.4.1.562.36.2.1mscComponentsNortel-MsCarrier-MscPassport-UsefulDefinitionsMIB
1.3.6.1.4.1.562.36.2.1.114mscAtmIfNortel-MsCarrier-MscPassport-AtmCoreMIB
Numeric OIDNameModule
1.3.6.1.4.1.562.36.2.1.114.96mscAtmIfPnniNortel-MsCarrier-MscPassport-AtmPnniMIB
1.3.6.1.4.1.562.36.2.1.114.96.11mscAtmIfPnniAdminWeightsTableNortel-MsCarrier-MscPassport-AtmPnniMIB
1.3.6.1.4.1.562.36.2.1.114.96.11.1mscAtmIfPnniAdminWeightsEntryNortel-MsCarrier-MscPassport-AtmPnniMIB
1.3.6.1.4.1.562.36.2.1.114.96.11.1.4mscAtmIfPnniUbrWeightNortel-MsCarrier-MscPassport-AtmPnniMIB