All MIBs › Nortel-MsCarrier-MscPassport-AtmPnniMIB › mscAtmIfVptPnniSigAddressConversion
mscAtmIfVptPnniSigAddressConversion
Module: Nortel-MsCarrier-MscPassport-AtmPnniMIB
OID (symbolic): Nortel-MsCarrier-MscPassport-AtmPnniMIB::mscAtmIfVptPnniSigAddressConversion
OID (numeric): 1.3.6.1.4.1.562.36.2.1.114.9.7.2.10.1.2
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: This attribute specifies the address conversion on the outgoing signalling PDUs. The options are none, nativeE164, or nsap. The none option is the default and if this option is chosen then nothing is done to the address information element (IE) in the outgoing signalling message. If nativeE164 option is chosen, then only NSAP encapsulated E.164 addresses with zeros in the ESI are converted to native E.164 format in the outgoing signalling message. If the NSAP address is not encapsulated E.164 or the ESI field is not zeros and the nativeE164 option is chosen, then the call is cleared. If the nsap option is chosen, then native E.164 addresses are converted to NSAP E.164 with zeros in the ESI field; otherwise the address is in NSAP format and is not changed.
What is mscAtmIfVptPnniSigAddressConversion?
Selects how the switch converts ATM addresses in outgoing signalling messages on a PNNI interface on a virtual path terminator (VPT): none(0) leaves the address information element unchanged, nativeE164(1) converts NSAP-encapsulated E.164 addresses with a zero ESI to native E.164 form, clearing the call if the address doesn't qualify, and nsap(2) converts native E.164 addresses to NSAP form. Admins set this to match the addressing format expected by the peer switch or carrier at the other end of the link.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.562.36.2.1.114.9.7.2.10.1.2 snmpwalk -v2c -c public <target> Nortel-MsCarrier-MscPassport-AtmPnniMIB::mscAtmIfVptPnniSigAddressConversion
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.562.36.2.1.114.9.7.2.10.1.2.1 snmpget -v2c -c public <target> Nortel-MsCarrier-MscPassport-AtmPnniMIB::mscAtmIfVptPnniSigAddressConversion.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.562.36.2.1.114.9.7.2.10.1.2.1 i <value>
Start monitoring Nortel MsCarrier/MainStreet Passport ATM switch (PNNI routing) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the Nortel-MsCarrier-MscPassport-AtmPnniMIB::mscAtmIfVptPnniSigAddressConversion OID value, configure state conditions and alerts, and monitor any Nortel MsCarrier/MainStreet Passport ATM switch (PNNI routing) from a single console.
OID Breakdown
Upper-level ancestors (12 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.562 | nortel | CPM-NORTEL-MIB |
| 1.3.6.1.4.1.562.36 | msCarrier | Nortel-MsCarrier-MscPassport-UsefulDefinitionsMIB |
| 1.3.6.1.4.1.562.36.2 | mscPassport | Nortel-MsCarrier-MscPassport-UsefulDefinitionsMIB |
| 1.3.6.1.4.1.562.36.2.1 | mscComponents | Nortel-MsCarrier-MscPassport-UsefulDefinitionsMIB |
| 1.3.6.1.4.1.562.36.2.1.114 | mscAtmIf | Nortel-MsCarrier-MscPassport-AtmCoreMIB |
| 1.3.6.1.4.1.562.36.2.1.114.9 | mscAtmIfVpt | Nortel-MsCarrier-MscPassport-AtmCoreMIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.562.36.2.1.114.9.7 | mscAtmIfVptPnni | Nortel-MsCarrier-MscPassport-AtmPnniMIB |
| 1.3.6.1.4.1.562.36.2.1.114.9.7.2 | mscAtmIfVptPnniSig | Nortel-MsCarrier-MscPassport-AtmPnniMIB |
| 1.3.6.1.4.1.562.36.2.1.114.9.7.2.10 | mscAtmIfVptPnniSigProvTable | Nortel-MsCarrier-MscPassport-AtmPnniMIB |
| 1.3.6.1.4.1.562.36.2.1.114.9.7.2.10.1 | mscAtmIfVptPnniSigProvEntry | Nortel-MsCarrier-MscPassport-AtmPnniMIB |
| 1.3.6.1.4.1.562.36.2.1.114.9.7.2.10.1.2 | mscAtmIfVptPnniSigAddressConversion | Nortel-MsCarrier-MscPassport-AtmPnniMIB |