All MIBs › Nortel-MsCarrier-MscPassport-AtmPnniMIB › mscAtmIfVptPnniSigOperatingMode
mscAtmIfVptPnniSigOperatingMode
Module: Nortel-MsCarrier-MscPassport-AtmPnniMIB
OID (symbolic): Nortel-MsCarrier-MscPassport-AtmPnniMIB::mscAtmIfVptPnniSigOperatingMode
OID (numeric): 1.3.6.1.4.1.562.36.2.1.114.9.7.2.10.1.3
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: This attribute specifies the operating mode of the signaling channel. provisionedOnly indicates that only SPVCs and SPVPs are supported on the interface and SVCs are not supported. This value is permitted only on UNI interfaces. normal indicates that SVCs, SPVCs, and SPVPs are supported on the interface.
What is mscAtmIfVptPnniSigOperatingMode?
Sets the signalling channel's operating mode on a PNNI interface on a virtual path terminator (VPT): normal(0) supports SVCs, SPVCs, and SPVPs, while provisionedOnly(1) restricts the interface to SPVCs/SPVPs only, no switched SVCs, and is only valid on UNI interfaces. Admins use provisionedOnly on links where only pre-provisioned soft-permanent connections should be allowed, disabling on-demand call setup.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.562.36.2.1.114.9.7.2.10.1.3 snmpwalk -v2c -c public <target> Nortel-MsCarrier-MscPassport-AtmPnniMIB::mscAtmIfVptPnniSigOperatingMode
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.562.36.2.1.114.9.7.2.10.1.3.1 snmpget -v2c -c public <target> Nortel-MsCarrier-MscPassport-AtmPnniMIB::mscAtmIfVptPnniSigOperatingMode.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.562.36.2.1.114.9.7.2.10.1.3.1 i <value>
SNMPv3 example:
snmpget -v3 -l authPriv -u snmpv3-user -a SHA -A "AuthPassword1" -x AES -X "PrivPassword1" <target> mscAtmIfVptPnniSigOperatingMode.1
Start monitoring Nortel MsCarrier/MainStreet Passport ATM switch (PNNI routing) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the Nortel-MsCarrier-MscPassport-AtmPnniMIB::mscAtmIfVptPnniSigOperatingMode OID value, configure state conditions and alerts, and monitor any Nortel MsCarrier/MainStreet Passport ATM switch (PNNI routing) from a single console.
OID Breakdown
Upper-level ancestors (12 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.562 | nortel | CPM-NORTEL-MIB |
| 1.3.6.1.4.1.562.36 | msCarrier | Nortel-MsCarrier-MscPassport-UsefulDefinitionsMIB |
| 1.3.6.1.4.1.562.36.2 | mscPassport | Nortel-MsCarrier-MscPassport-UsefulDefinitionsMIB |
| 1.3.6.1.4.1.562.36.2.1 | mscComponents | Nortel-MsCarrier-MscPassport-UsefulDefinitionsMIB |
| 1.3.6.1.4.1.562.36.2.1.114 | mscAtmIf | Nortel-MsCarrier-MscPassport-AtmCoreMIB |
| 1.3.6.1.4.1.562.36.2.1.114.9 | mscAtmIfVpt | Nortel-MsCarrier-MscPassport-AtmCoreMIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.562.36.2.1.114.9.7 | mscAtmIfVptPnni | Nortel-MsCarrier-MscPassport-AtmPnniMIB |
| 1.3.6.1.4.1.562.36.2.1.114.9.7.2 | mscAtmIfVptPnniSig | Nortel-MsCarrier-MscPassport-AtmPnniMIB |
| 1.3.6.1.4.1.562.36.2.1.114.9.7.2.10 | mscAtmIfVptPnniSigProvTable | Nortel-MsCarrier-MscPassport-AtmPnniMIB |
| 1.3.6.1.4.1.562.36.2.1.114.9.7.2.10.1 | mscAtmIfVptPnniSigProvEntry | Nortel-MsCarrier-MscPassport-AtmPnniMIB |
| 1.3.6.1.4.1.562.36.2.1.114.9.7.2.10.1.3 | mscAtmIfVptPnniSigOperatingMode | Nortel-MsCarrier-MscPassport-AtmPnniMIB |