Nortel-MsCarrier-MscPassport-AtmPnniMIB :: mscAtmIfPnniSigOperatingMode

MIB Reference — IPNetwork Monitor · Updated October 06, 2026

All MIBs › Nortel-MsCarrier-MscPassport-AtmPnniMIB › mscAtmIfPnniSigOperatingMode

mscAtmIfPnniSigOperatingMode

Module: Nortel-MsCarrier-MscPassport-AtmPnniMIB

OID (symbolic): Nortel-MsCarrier-MscPassport-AtmPnniMIB::mscAtmIfPnniSigOperatingMode

OID (numeric): 1.3.6.1.4.1.562.36.2.1.114.96.2.10.1.3

Node type: OBJECT-TYPE

Type: INTEGER

Access: read-write

Description: This attribute specifies the operating mode of the signaling channel. provisionedOnly indicates that only SPVCs and SPVPs are supported on the interface and SVCs are not supported. This value is permitted only on UNI interfaces. normal indicates that SVCs, SPVCs, and SPVPs are supported on the interface.

What is mscAtmIfPnniSigOperatingMode?

Sets the signalling channel's operating mode on a PNNI interface on a regular ATM interface: normal(0) supports SVCs, SPVCs, and SPVPs, while provisionedOnly(1) restricts the interface to SPVCs/SPVPs only, no switched SVCs, and is only valid on UNI interfaces. Admins use provisionedOnly on links where only pre-provisioned soft-permanent connections should be allowed, disabling on-demand call setup.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.562.36.2.1.114.96.2.10.1.3
snmpwalk -v2c -c public <target> Nortel-MsCarrier-MscPassport-AtmPnniMIB::mscAtmIfPnniSigOperatingMode

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.562.36.2.1.114.96.2.10.1.3.1
snmpget -v2c -c public <target> Nortel-MsCarrier-MscPassport-AtmPnniMIB::mscAtmIfPnniSigOperatingMode.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.562.36.2.1.114.96.2.10.1.3.1 i <value>

Start monitoring Nortel MsCarrier/MainStreet Passport ATM switch (PNNI routing) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the Nortel-MsCarrier-MscPassport-AtmPnniMIB::mscAtmIfPnniSigOperatingMode OID value, configure state conditions and alerts, and monitor any Nortel MsCarrier/MainStreet Passport ATM switch (PNNI routing) from a single console.

OID Breakdown

Upper-level ancestors (11 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.562nortelCPM-NORTEL-MIB
1.3.6.1.4.1.562.36msCarrierNortel-MsCarrier-MscPassport-UsefulDefinitionsMIB
1.3.6.1.4.1.562.36.2mscPassportNortel-MsCarrier-MscPassport-UsefulDefinitionsMIB
1.3.6.1.4.1.562.36.2.1mscComponentsNortel-MsCarrier-MscPassport-UsefulDefinitionsMIB
1.3.6.1.4.1.562.36.2.1.114mscAtmIfNortel-MsCarrier-MscPassport-AtmCoreMIB
Numeric OIDNameModule
1.3.6.1.4.1.562.36.2.1.114.96mscAtmIfPnniNortel-MsCarrier-MscPassport-AtmPnniMIB
1.3.6.1.4.1.562.36.2.1.114.96.2mscAtmIfPnniSigNortel-MsCarrier-MscPassport-AtmPnniMIB
1.3.6.1.4.1.562.36.2.1.114.96.2.10mscAtmIfPnniSigProvTableNortel-MsCarrier-MscPassport-AtmPnniMIB
1.3.6.1.4.1.562.36.2.1.114.96.2.10.1mscAtmIfPnniSigProvEntryNortel-MsCarrier-MscPassport-AtmPnniMIB
1.3.6.1.4.1.562.36.2.1.114.96.2.10.1.3mscAtmIfPnniSigOperatingModeNortel-MsCarrier-MscPassport-AtmPnniMIB