Nortel-MsCarrier-MscPassport-AtmPnniMIB :: mscAtmIfVptPnniRccHelloHoldDown

MIB Reference — IPNetwork Monitor · Updated October 06, 2026

All MIBs › Nortel-MsCarrier-MscPassport-AtmPnniMIB › mscAtmIfVptPnniRccHelloHoldDown

mscAtmIfVptPnniRccHelloHoldDown

Module: Nortel-MsCarrier-MscPassport-AtmPnniMIB

OID (symbolic): Nortel-MsCarrier-MscPassport-AtmPnniMIB::mscAtmIfVptPnniRccHelloHoldDown

OID (numeric): 1.3.6.1.4.1.562.36.2.1.114.9.7.3.11.1.1

Node type: OBJECT-TYPE

Type: FixedPoint1

Access: read-write

Description: This attribute is used to limit the rate at which this node sends out Hello packets. Specifically, it specifies the minimum time between successive Hellos.

A value of 0 specifies that the value provisioned for the helloHoldDown attribute of the ARtg Pnni component should be used.

What is mscAtmIfVptPnniRccHelloHoldDown?

Sets, in tenths of a second, 0-65535, i.e. up to 6553.5s, default 0, the minimum time this node waits between sending consecutive PNNI Hello packets on a PNNI interface on a virtual path terminator (VPT)'s RCC; a value of 0 means use the value provisioned on the parent ARtg Pnni component instead. Admins rarely override this per-interface, relying on the node-wide default unless a specific link needs different Hello pacing.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.562.36.2.1.114.9.7.3.11.1.1
snmpwalk -v2c -c public <target> Nortel-MsCarrier-MscPassport-AtmPnniMIB::mscAtmIfVptPnniRccHelloHoldDown

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.562.36.2.1.114.9.7.3.11.1.1.1
snmpget -v2c -c public <target> Nortel-MsCarrier-MscPassport-AtmPnniMIB::mscAtmIfVptPnniRccHelloHoldDown.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.562.36.2.1.114.9.7.3.11.1.1.1 s <value>

Start monitoring Nortel MsCarrier/MainStreet Passport ATM switch (PNNI routing) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the Nortel-MsCarrier-MscPassport-AtmPnniMIB::mscAtmIfVptPnniRccHelloHoldDown OID value, configure state conditions and alerts, and monitor any Nortel MsCarrier/MainStreet Passport ATM switch (PNNI routing) from a single console.

OID Breakdown

Upper-level ancestors (12 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.562nortelCPM-NORTEL-MIB
1.3.6.1.4.1.562.36msCarrierNortel-MsCarrier-MscPassport-UsefulDefinitionsMIB
1.3.6.1.4.1.562.36.2mscPassportNortel-MsCarrier-MscPassport-UsefulDefinitionsMIB
1.3.6.1.4.1.562.36.2.1mscComponentsNortel-MsCarrier-MscPassport-UsefulDefinitionsMIB
1.3.6.1.4.1.562.36.2.1.114mscAtmIfNortel-MsCarrier-MscPassport-AtmCoreMIB
1.3.6.1.4.1.562.36.2.1.114.9mscAtmIfVptNortel-MsCarrier-MscPassport-AtmCoreMIB
Numeric OIDNameModule
1.3.6.1.4.1.562.36.2.1.114.9.7mscAtmIfVptPnniNortel-MsCarrier-MscPassport-AtmPnniMIB
1.3.6.1.4.1.562.36.2.1.114.9.7.3mscAtmIfVptPnniRccNortel-MsCarrier-MscPassport-AtmPnniMIB
1.3.6.1.4.1.562.36.2.1.114.9.7.3.11mscAtmIfVptPnniRccHlParmsTableNortel-MsCarrier-MscPassport-AtmPnniMIB
1.3.6.1.4.1.562.36.2.1.114.9.7.3.11.1mscAtmIfVptPnniRccHlParmsEntryNortel-MsCarrier-MscPassport-AtmPnniMIB
1.3.6.1.4.1.562.36.2.1.114.9.7.3.11.1.1mscAtmIfVptPnniRccHelloHoldDownNortel-MsCarrier-MscPassport-AtmPnniMIB