Nortel-MsCarrier-MscPassport-AtmPnniMIB :: mscAtmIfPnniSigLastTxDiagCode

MIB Reference — IPNetwork Monitor · Updated October 06, 2026

All MIBs › Nortel-MsCarrier-MscPassport-AtmPnniMIB › mscAtmIfPnniSigLastTxDiagCode

mscAtmIfPnniSigLastTxDiagCode

Module: Nortel-MsCarrier-MscPassport-AtmPnniMIB

OID (symbolic): Nortel-MsCarrier-MscPassport-AtmPnniMIB::mscAtmIfPnniSigLastTxDiagCode

OID (numeric): 1.3.6.1.4.1.562.36.2.1.114.96.2.12.1.2

Node type: OBJECT-TYPE

Type: Hex

Access: read-only

Description: This attribute contains the diagnostic code in the last transmitted signalling message. The diagnostic code is contained in the CAUSE information element and identifies an information element type or timer type. The diagnostic code is present only if a procedural error is detected by the signalling protocol. A diagnostic code is always accompanied by the cause code. If there is no failure, this attribute is set to 0.

What is mscAtmIfPnniSigLastTxDiagCode?

Reports the diagnostic code, 0-255 hex, from the CAUSE information element in the last transmitted signalling message on a PNNI interface on a regular ATM interface, present only when a procedural signalling error was detected; it reads 0 when there was no failure. Admins use this alongside the last-Tx cause code to pin down exactly which information element or timer triggered a signalling error.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.562.36.2.1.114.96.2.12.1.2
snmpwalk -v2c -c public <target> Nortel-MsCarrier-MscPassport-AtmPnniMIB::mscAtmIfPnniSigLastTxDiagCode

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.562.36.2.1.114.96.2.12.1.2.1
snmpget -v2c -c public <target> Nortel-MsCarrier-MscPassport-AtmPnniMIB::mscAtmIfPnniSigLastTxDiagCode.1

Start monitoring Nortel MsCarrier/MainStreet Passport ATM switch (PNNI routing) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the Nortel-MsCarrier-MscPassport-AtmPnniMIB::mscAtmIfPnniSigLastTxDiagCode OID value, configure state conditions and alerts, and monitor any Nortel MsCarrier/MainStreet Passport ATM switch (PNNI routing) from a single console.

OID Breakdown

Upper-level ancestors (11 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.562nortelCPM-NORTEL-MIB
1.3.6.1.4.1.562.36msCarrierNortel-MsCarrier-MscPassport-UsefulDefinitionsMIB
1.3.6.1.4.1.562.36.2mscPassportNortel-MsCarrier-MscPassport-UsefulDefinitionsMIB
1.3.6.1.4.1.562.36.2.1mscComponentsNortel-MsCarrier-MscPassport-UsefulDefinitionsMIB
1.3.6.1.4.1.562.36.2.1.114mscAtmIfNortel-MsCarrier-MscPassport-AtmCoreMIB
Numeric OIDNameModule
1.3.6.1.4.1.562.36.2.1.114.96mscAtmIfPnniNortel-MsCarrier-MscPassport-AtmPnniMIB
1.3.6.1.4.1.562.36.2.1.114.96.2mscAtmIfPnniSigNortel-MsCarrier-MscPassport-AtmPnniMIB
1.3.6.1.4.1.562.36.2.1.114.96.2.12mscAtmIfPnniSigOperTableNortel-MsCarrier-MscPassport-AtmPnniMIB
1.3.6.1.4.1.562.36.2.1.114.96.2.12.1mscAtmIfPnniSigOperEntryNortel-MsCarrier-MscPassport-AtmPnniMIB
1.3.6.1.4.1.562.36.2.1.114.96.2.12.1.2mscAtmIfPnniSigLastTxDiagCodeNortel-MsCarrier-MscPassport-AtmPnniMIB