Nortel-MsCarrier-MscPassport-AtmPnniMIB :: mscAtmIfPnniSigOperationalState

MIB Reference — IPNetwork Monitor · Updated October 06, 2026

All MIBs › Nortel-MsCarrier-MscPassport-AtmPnniMIB › mscAtmIfPnniSigOperationalState

mscAtmIfPnniSigOperationalState

Module: Nortel-MsCarrier-MscPassport-AtmPnniMIB

OID (symbolic): Nortel-MsCarrier-MscPassport-AtmPnniMIB::mscAtmIfPnniSigOperationalState

OID (numeric): 1.3.6.1.4.1.562.36.2.1.114.96.2.11.1.2

Node type: OBJECT-TYPE

Type: INTEGER

Access: read-only

Description: This attribute indicates the OSI Operational State of the component.

The value enabled indicates that the component is available for operation. Note that if adminState is locked, it would still not be providing service.

The value disabled indicates that the component is not available for operation. For example, something is wrong with the component itself, or with another component on which this one depends. If the value is disabled, the usageState must be idle.

What is mscAtmIfPnniSigOperationalState?

Reports whether the signalling subcomponent on a PNNI interface on a regular ATM interface is actually enabled(1) and available, or disabled(0), the default until it comes up, due to a fault in itself or a dependency. Admins check this alongside the admin state, since a component can be administratively unlocked yet operationally disabled if something underneath it has failed.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.562.36.2.1.114.96.2.11.1.2
snmpwalk -v2c -c public <target> Nortel-MsCarrier-MscPassport-AtmPnniMIB::mscAtmIfPnniSigOperationalState

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.562.36.2.1.114.96.2.11.1.2.1
snmpget -v2c -c public <target> Nortel-MsCarrier-MscPassport-AtmPnniMIB::mscAtmIfPnniSigOperationalState.1

Start monitoring Nortel MsCarrier/MainStreet Passport ATM switch (PNNI routing) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the Nortel-MsCarrier-MscPassport-AtmPnniMIB::mscAtmIfPnniSigOperationalState OID value, configure state conditions and alerts, and monitor any Nortel MsCarrier/MainStreet Passport ATM switch (PNNI routing) from a single console.

OID Breakdown

Upper-level ancestors (11 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.562nortelCPM-NORTEL-MIB
1.3.6.1.4.1.562.36msCarrierNortel-MsCarrier-MscPassport-UsefulDefinitionsMIB
1.3.6.1.4.1.562.36.2mscPassportNortel-MsCarrier-MscPassport-UsefulDefinitionsMIB
1.3.6.1.4.1.562.36.2.1mscComponentsNortel-MsCarrier-MscPassport-UsefulDefinitionsMIB
1.3.6.1.4.1.562.36.2.1.114mscAtmIfNortel-MsCarrier-MscPassport-AtmCoreMIB
Numeric OIDNameModule
1.3.6.1.4.1.562.36.2.1.114.96mscAtmIfPnniNortel-MsCarrier-MscPassport-AtmPnniMIB
1.3.6.1.4.1.562.36.2.1.114.96.2mscAtmIfPnniSigNortel-MsCarrier-MscPassport-AtmPnniMIB
1.3.6.1.4.1.562.36.2.1.114.96.2.11mscAtmIfPnniSigStateTableNortel-MsCarrier-MscPassport-AtmPnniMIB
1.3.6.1.4.1.562.36.2.1.114.96.2.11.1mscAtmIfPnniSigStateEntryNortel-MsCarrier-MscPassport-AtmPnniMIB
1.3.6.1.4.1.562.36.2.1.114.96.2.11.1.2mscAtmIfPnniSigOperationalStateNortel-MsCarrier-MscPassport-AtmPnniMIB