All MIBs › HPN-ICF-NAT-MIB › hpnicfNATBLConSpd
hpnicfNATBLConSpd
Module: HPN-ICF-NAT-MIB
OID (symbolic): HPN-ICF-NAT-MIB::hpnicfNATBLConSpd
OID (numeric): 1.3.6.1.4.1.11.2.14.11.15.2.18.2.7.1.4
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-only
Description: The state of connection rate: red(1) : the connection rate is above the upper limit. yellow(2): the connection rate is between the upper and lower limit. green(3) : the conneciton rate is below the lower limit.
What is hpnicfNATBLConSpd?
This read-only INTEGER, indexed by IP address and NAT board slot, reports a traffic-light status for a host's connection rate: red(1) above the upper limit, yellow(2) between the limits, or green(3) below the lower limit. An admin scans for red(1) entries to quickly spot which specific hosts are currently exceeding their allowed connection rate.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.11.2.14.11.15.2.18.2.7.1.4 snmpwalk -v2c -c public <target> HPN-ICF-NAT-MIB::hpnicfNATBLConSpd
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.11.2.14.11.15.2.18.2.7.1.4.1 snmpget -v2c -c public <target> HPN-ICF-NAT-MIB::hpnicfNATBLConSpd.1
SNMPv3 example:
snmpget -v3 -l authPriv -u snmpv3-user -a SHA -A "AuthPassword1" -x AES -X "PrivPassword1" <target> hpnicfNATBLConSpd.1
Start monitoring HP/H3C/HPE Comware switch or router (Network Address Translation) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the HPN-ICF-NAT-MIB::hpnicfNATBLConSpd OID value, configure state conditions and alerts, and monitor any HP/H3C/HPE Comware switch or router (Network Address Translation) from a single console.
OID Breakdown
Upper-level ancestors (12 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.11 | hp | CLJ8500-MIB |
| 1.3.6.1.4.1.11.2 | nm | CLJ8500-MIB |
| 1.3.6.1.4.1.11.2.14 | icf | CONFIG-MIB |
| 1.3.6.1.4.1.11.2.14.11 | hpicfObjects | CONFIG-MIB |
| 1.3.6.1.4.1.11.2.14.11.15 | hpnicf | HPN-ICF-OID-MIB |
| 1.3.6.1.4.1.11.2.14.11.15.2 | hpnicfCommon | HPN-ICF-OID-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.11.2.14.11.15.2.18 | hpnicfNat | HPN-ICF-NAT-MIB |
| 1.3.6.1.4.1.11.2.14.11.15.2.18.2 | hpnicfNATMibObjects | HPN-ICF-NAT-MIB |
| 1.3.6.1.4.1.11.2.14.11.15.2.18.2.7 | hpnicfNATBLManagerTable | HPN-ICF-NAT-MIB |
| 1.3.6.1.4.1.11.2.14.11.15.2.18.2.7.1 | hpnicfNATBLManagerEntry | HPN-ICF-NAT-MIB |
| 1.3.6.1.4.1.11.2.14.11.15.2.18.2.7.1.4 | hpnicfNATBLConSpd | HPN-ICF-NAT-MIB |