All MIBs › CRI-SERVER-MIB
Category: Device Management, Hardware and Environment
Description: Monitors CRI server platform hardware status, system resources, and operational health indicators.
Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.
What Is CRI-SERVER-MIB?
This is a vendor MIB from CRI for monitoring the hardware and operational status of CRI server platforms, intended to give SNMP visibility into a server's physical and system-level condition. Based on its stated purpose it would expose general system-resource and health indicators typical of server hardware-monitoring MIBs, such as processor load, memory utilization, and physical component status. It is explicitly aimed at monitoring the hardware and software operational health of the server, the kind of data an administrator needs to catch failing components or resource exhaustion before it causes downtime. No dependency information is discernible from the available metadata. It would be deployed on CRI server hardware in a data center or lab environment, polled by a general-purpose NMS for basic server health monitoring. Engineers can download the CRI-SERVER-MIB file directly to load it into their MIB browser.
IPNetwork Monitor allows you to monitor SNMP objects defined in CRI-SERVER-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.
Supported Devices
- CRI server platform
Monitoring Examples
No sample object names or module description text were provided for this MIB, so specific table/object-level detail cannot be given honestly; only the short description ('hardware status, system resources, and operational health indicators') is available, and concrete object identifiers are not confirmed here.
This MIB depends on
Related MIBs
Imported Objects
OIDs
| OID symbolic | OID numeric | Type | Access | Description |
|---|---|---|---|---|
| NTF arbitrationStop | 1.3.6.1.4.1.34.0.56 | This trap indicates that a particular domain has experienced an arbstop. All variables will be provided with this trap. | ||
| NTF bootProcChange | 1.3.6.1.4.1.34.0.72 | This trap indicates a change in the Boot Proc. All variables are mandatory for this event. | ||
| NTF bulkPowerFail | 1.3.6.1.4.1.34.0.71 | This trap indicates Bulk Power failure. All variables are mandatory for this event. | ||
| INT bulkPowerGenControl | 1.3.6.1.4.1.34.2.1.14.1.3 | INTEGER | read-write | The MIB object that is used to power off this bulk power supply. On writing, it powers off this bulk power supply. |
| bulkPowerGenEntry | 1.3.6.1.4.1.34.2.1.14.1 | not-accessible | A bulk power supply table entry. | |
| INT bulkPowerGenIndex | 1.3.6.1.4.1.34.2.1.14.1.1 | INTEGER | read-only | An index into this table. |
| INT bulkPowerGenNum | 1.3.6.1.4.1.34.2.1.14.1.2 | INTEGER | read-only | A unique number assigned to this bulk power supply. |
| INT bulkPowerGenStatus | 1.3.6.1.4.1.34.2.1.14.1.4 | INTEGER | read-only | Power status of the bulk power supply. A status of ok implies the unit is on and supplying enough voltage/current. A status of fail implies the unit is on but not supplying enough voltage/current or the unit is off. |
| bulkPowerGenTable | 1.3.6.1.4.1.34.2.1.14 | not-accessible | A table of bulk power supply entries. | |
| NTF bulkPowerNorm | 1.3.6.1.4.1.34.0.70 | This trap indicates that a particular Bulk Power has returned to (or is in) normal mode. All variables are mandatory for this trap. | ||
| NTF cbeConnected | 1.3.6.1.4.1.34.0.24 | This trap indicates that the control board server (cbs) is connected to the control board executive (cbe) and is ready for control board operation. All variables are mandatory for this trap. | ||
| NTF cbeDisconnected | 1.3.6.1.4.1.34.0.25 | This trap indicates that the control board server (cbs) has lost connection with the control board executive (cbe). All variables are mandatory for this trap. | ||
| cbGenEntry | 1.3.6.1.4.1.34.2.1.7.1 | not-accessible | A general control board table entry. | |
| INT cbGenIndex | 1.3.6.1.4.1.34.2.1.7.1.1 | INTEGER | read-only | An index into this table. |
| INT cbGenNum | 1.3.6.1.4.1.34.2.1.7.1.2 | INTEGER | read-only | A unique number assigned to a control board. |
| INT cbGenPower | 1.3.6.1.4.1.34.2.1.7.1.3 | INTEGER | read-only | Power status of the control board. |
| INT cbGenPowerControl | 1.3.6.1.4.1.34.2.1.7.1.4 | INTEGER | read-write | On writing, it turns off this control board power supply. By default, control board is powered on automatically upon insertion to the cabinet or when house keeping power is applied. On reading, it always returns off. |
| cbGenTable | 1.3.6.1.4.1.34.2.1.7 | not-accessible | A table of general control board entries. | |
| INT cbStarfire3p3VDCHK | 1.3.6.1.4.1.34.2.2.2.1.12 | INTEGER | read-only | The voltage reading of housekeeping 3.3V DC. |
| INT cbStarfire5VDC | 1.3.6.1.4.1.34.2.2.2.1.10 | INTEGER | read-only | The voltage reading of 5V DC. |
| INT cbStarfire5VDCFan | 1.3.6.1.4.1.34.2.2.2.1.14 | INTEGER | read-only | The voltage reading of VccFan. |
| INT cbStarfire5VDCFanTemp | 1.3.6.1.4.1.34.2.2.2.1.6 | INTEGER | read-only | The temperature of PS3. |
| INT cbStarfire5VDCHK | 1.3.6.1.4.1.34.2.2.2.1.11 | INTEGER | read-only | The voltage reading of housekeeping 5V DC. |
| INT cbStarfire5VDCPer | 1.3.6.1.4.1.34.2.2.2.1.13 | INTEGER | read-only | The voltage reading of VccPer. |
| INT cbStarfire5VDCPerTemp | 1.3.6.1.4.1.34.2.2.2.1.5 | INTEGER | read-only | The temperature of PS2. |
| INT cbStarfire5VDCTemp | 1.3.6.1.4.1.34.2.2.2.1.4 | INTEGER | read-only | The temperature of PS1. |
| cbStarfireEntry | 1.3.6.1.4.1.34.2.2.2.1 | not-accessible | A control board table entry. | |
| STR cbStarfireHostName | 1.3.6.1.4.1.34.2.2.2.1.3 | DisplayString | read-only | Host name assigned to this control board. |
| INT cbStarfireIndex | 1.3.6.1.4.1.34.2.2.2.1.1 | INTEGER | read-only | An index into this table. |
| INT cbStarfireNum | 1.3.6.1.4.1.34.2.2.2.1.2 | INTEGER | read-only | A unique number assigned to a control board. |
| INT cbStarfireSen0Temp | 1.3.6.1.4.1.34.2.2.2.1.7 | INTEGER | read-only | The temperature of the 1st temperature sensor. |
| INT cbStarfireSen1Temp | 1.3.6.1.4.1.34.2.2.2.1.8 | INTEGER | read-only | The temperature of the 2nd temperature sensor. |
| INT cbStarfireSen2Temp | 1.3.6.1.4.1.34.2.2.2.1.9 | INTEGER | read-only | The temperature of the 3rd temperature sensor. |
| cbStarfireTable | 1.3.6.1.4.1.34.2.2.2 | not-accessible | A table of control board entries. | |
| NTF cbTemp911 | 1.3.6.1.4.1.34.0.14 | This trap indicates a Control Board 911 temperature reading. The platform name and board number variables will always be provided with this trap. Whereas, only those temperature readings that crossed the threshold will be included. | ||
| NTF cbTempBad | 1.3.6.1.4.1.34.0.15 | This trap indicates a Control Board bad temperature reading. This means that at least half the temperature sensors on the board report invalid temperature readings. For ASIC temperature errors, it is possible that the ASICs are not thermally calibrated. The platform name and board number variables will always be provided with this trap. Whereas, only those temperature readings that crossed the threshold will be included. | ||
| NTF cbTempChange | 1.3.6.1.4.1.34.0.16 | This trap indicates that a Control Board temperature reading has changed within a specified delta. The platform name and board number variables will always be provided with this trap. Whereas, only those temperature readings that crossed the threshold will be included. | ||
| NTF cbTempHigh | 1.3.6.1.4.1.34.0.11 | This trap indicates a Control Board high temperature reading. The platform name and board number variables will always be provided with this trap. Whereas, only those temperature readings that crossed the threshold will be included. | ||
| NTF cbTempMax | 1.3.6.1.4.1.34.0.13 | This trap indicates a Control Board max temperature reading. The platform name and board number variables will always be provided with this trap. Whereas, only those temperature readings that crossed the threshold will be included. | ||
| NTF cbTempNorm | 1.3.6.1.4.1.34.0.10 | This trap indicates a Control Board transition to normal temperature reading. The platform name and board number variables will always be provided with this trap. Whereas, only those temperature readings that crossed the threshold will be included. | ||
| NTF cbTempWarn | 1.3.6.1.4.1.34.0.12 | This trap indicates a Control Board warning temperature reading. The platform name and board number variables will always be provided with this trap. Whereas, only those temperature readings that crossed the threshold will be included. | ||
| NTF cbVoltBad | 1.3.6.1.4.1.34.0.41 | This trap indicates a Control Board bad voltage reading. This means that at least half the voltage sensors on the board report invalid voltage readings. The platform name and board number variables will always be provided with this trap. Whereas, only those voltage readings that crossed the threshold will be included. | ||
| NTF cbVoltChange | 1.3.6.1.4.1.34.0.42 | This trap indicates a Control Board voltage reading has changed within a specified delta. The platform name and board number variables will always be provided with this trap. Whereas, only those voltage readings that crossed the threshold will be included. | ||
| NTF cbVoltMax | 1.3.6.1.4.1.34.0.39 | This trap indicates a Control Board max voltage reading. The platform name and board number variables will always be provided with this trap. Whereas, only those voltage readings that crossed the threshold will be included. | ||
| NTF cbVoltMin | 1.3.6.1.4.1.34.0.40 | This trap indicates a Control Board min voltage reading. The platform name and board number variables will always be provided with this trap. Whereas, only those voltage readings that crossed the threshold will be included. | ||
| NTF cbVoltNorm | 1.3.6.1.4.1.34.0.38 | This trap indicates a Control Board transition to normal voltage reading. The platform name and board number variables will always be provided with this trap. Whereas, only those voltage readings that crossed the threshold will be included. | ||
| centerplaneStarfireEntry | 1.3.6.1.4.1.34.2.2.3.1 | not-accessible | A centerplane table entry. | |
| INT centerplaneStarfireIndex | 1.3.6.1.4.1.34.2.2.3.1.1 | INTEGER | read-only | An index into this table. |
| INT centerplaneStarfireNum | 1.3.6.1.4.1.34.2.2.3.1.2 | INTEGER | read-only | A unique number assigned to this centerplane. |
| centerplaneStarfireTable | 1.3.6.1.4.1.34.2.2.3 | not-accessible | A table of centerplane entries. | |
| INT centerplaneStarfireTemp0 | 1.3.6.1.4.1.34.2.2.3.1.3 | INTEGER | read-only | The 1st temp point of this Starfire centerplane. |
| INT centerplaneStarfireTemp1 | 1.3.6.1.4.1.34.2.2.3.1.4 | INTEGER | read-only | The 2nd temp point of this Starfire centerplane. |
| INT centerplaneStarfireTemp2 | 1.3.6.1.4.1.34.2.2.3.1.5 | INTEGER | read-only | The 3rd temp point of this Starfire centerplane. |
| INT centerplaneStarfireTemp3 | 1.3.6.1.4.1.34.2.2.3.1.6 | INTEGER | read-only | The 4th temp point of this Starfire centerplane. |
| INT centerplaneStarfireTemp4 | 1.3.6.1.4.1.34.2.2.3.1.7 | INTEGER | read-only | The 5th temp point of this Starfire centerplane. |
| INT centerplaneStarfireTemp5 | 1.3.6.1.4.1.34.2.2.3.1.8 | INTEGER | read-only | The 6th temp point of this Starfire centerplane. |
| INT centerplaneStarfireTemp6 | 1.3.6.1.4.1.34.2.2.3.1.9 | INTEGER | read-only | The 7th temp point of this Starfire centerplane. |
| INT centerplaneStarfireTemp7 | 1.3.6.1.4.1.34.2.2.3.1.10 | INTEGER | read-only | The 8th temp point of this Starfire centerplane. |
| INT centerplaneStarfireTemp8 | 1.3.6.1.4.1.34.2.2.3.1.11 | INTEGER | read-only | The 9th temp point of this Starfire centerplane. |
| INT centerplaneStarfireTemp9 | 1.3.6.1.4.1.34.2.2.3.1.12 | INTEGER | read-only | The 10th temp point of this Starfire centerplane. |
| NTF centerplaneTemp911 | 1.3.6.1.4.1.34.0.21 | This trap indicates a Centerplane 911 temperature reading. The platform name and board number variables will always be provided with this trap. Whereas, only those temperature readings that crossed the threshold will be included. | ||
| NTF centerplaneTempBad | 1.3.6.1.4.1.34.0.22 | This trap indicates a Centerplane bad temperature reading. This means that at least half the temperature sensors on the board report invalid temperature readings. For ASIC temperature errors, it is possible that the ASICs are not thermally calibrated. The platform name and board number variables will always be provided with this trap. Whereas, only those temperature readings that crossed the threshold will be included. | ||
| NTF centerplaneTempChange | 1.3.6.1.4.1.34.0.23 | This trap indicates that a Centerplane temperature reading has changed within a specified delta. The platform name and board number variables will always be provided with this trap. Whereas, only those temperature readings that crossed the threshold will be included. | ||
| NTF centerplaneTempHigh | 1.3.6.1.4.1.34.0.18 | This trap indicates a Centerplane high temperature reading. The platform name and board number variables will always be provided with this trap. Whereas, only those temperature readings that crossed the threshold will be included. | ||
| NTF centerplaneTempMax | 1.3.6.1.4.1.34.0.20 | This trap indicates a Centerplane max temperature reading. The platform name and board number variables will always be provided with this trap. Whereas, only those temperature readings that crossed the threshold will be included. | ||
| NTF centerplaneTempNorm | 1.3.6.1.4.1.34.0.17 | This trap indicates a Centerplane transition to normal temperature reading. The platform name and board number variables will always be provided with this trap. Whereas, only those temperature readings that crossed the threshold will be included. | ||
| NTF centerplaneTempWarn | 1.3.6.1.4.1.34.0.19 | This trap indicates a Centerplane warning temperature reading. The platform name and board number variables will always be provided with this trap. Whereas, only those temperature readings that crossed the threshold will be included. | ||
| NTF centerplaneVoltBad | 1.3.6.1.4.1.34.0.46 | This trap indicates a Centerplane bad voltage reading. This means that at least half the voltage sensors on the board report invalid voltage readings. The platform name and board number variables will always be provided with this trap. Whereas, only those voltage readings that crossed the threshold will be included. | ||
| NTF centerplaneVoltChange | 1.3.6.1.4.1.34.0.47 | This trap indicates a Centerplane voltage reading has changed within a specified delta. The platform name and board number variables will always be provided with this trap. Whereas, only those voltage readings that crossed the threshold will be included. | ||
| NTF centerplaneVoltMax | 1.3.6.1.4.1.34.0.44 | This trap indicates a Centerplane max voltage reading. The platform name and board number variables will always be provided with this trap. Whereas, only those voltage readings that crossed the threshold will be included. | ||
| NTF centerplaneVoltMin | 1.3.6.1.4.1.34.0.45 | This trap indicates a Centerplane Min voltage reading. The platform name and board number variables will always be provided with this trap. Whereas, only those voltage readings that crossed the threshold will be included. | ||
| NTF centerplaneVoltNorm | 1.3.6.1.4.1.34.0.43 | This trap indicates a Centerplane transition to normal voltage reading. The platform name and board number variables will always be provided with this trap.' Whereas, only those voltage readings that crossed the threshold will be included. | ||
| conf | 1.3.6.1.4.1.34.2.1.2 | |||
| STR confBulkPowerList | 1.3.6.1.4.1.34.2.1.2.18 | DisplayString | read-only | A string identifying the bulk power supplies that are present in the system. The format of the string is: x-x where x is the bulk power supply number and dash is the delimiter. Bulk power supplies are numbered 0 to 7. |
| STR confCenterplaneList | 1.3.6.1.4.1.34.2.1.2.14 | DisplayString | read-only | A string identifying the centerplanes that are present in the system. The format of the string is: xx-xx-.. where xx is the centerplane number and dash is the delimiter. |
| STR confConBrdList | 1.3.6.1.4.1.34.2.1.2.13 | DisplayString | read-only | A string identifying the control boards that are present in the system. The format of the string is: xx-xx-.. where xx is the control board number and dash is the delimiter. |
| STR confFanTrayList | 1.3.6.1.4.1.34.2.1.2.17 | DisplayString | read-only | A string identifying the fan trays that are present in the system. the format of the string is: xx-xx-... where xx is the fan tray number and dash is the delimiter. |
| STR confIoCabList | 1.3.6.1.4.1.34.2.1.2.16 | DisplayString | read-only | A string identifying the IO cabinets that are connected to the system. The format of the string is: xx-xx-... where xx is the I/O cabinet number and dash is the delimiter. |
| INT confMaxFanPerTray | 1.3.6.1.4.1.34.2.1.2.21 | INTEGER | read-only | The maximum number of fan in a fan tray. There is a max of 2 fan in a Starfire fan tray. |
| INT confMaxLEDPerBulkPower | 1.3.6.1.4.1.34.2.1.2.23 | INTEGER | read-only | The maximum number of LED in a bulk power supply. There is a max of 2 LEDs in a Starfire bulk power supply. |
| INT confMaxLEDPerFanTray | 1.3.6.1.4.1.34.2.1.2.22 | INTEGER | read-only | The maximum number of LED in a fan tray. There is a max of 2 LEDs in a Starfire fan tray. |
| INT confMaxLEDPerSysBrd | 1.3.6.1.4.1.34.2.1.2.24 | INTEGER | read-only | The maximum number of LED in a system board. |
| INT confMaxProcPerSysBrd | 1.3.6.1.4.1.34.2.1.2.20 | INTEGER | read-only | The maximum number of processor in a system board. There is a max of 4 processors in a Starfire system board. |
| OCT confMemAddrMap | 1.3.6.1.4.1.34.2.1.2.25 | OCTET STRING | read-write | Starfire supports Shared Memory Domains. This requires the memory boards in the machine to have unique address. Because of this global requirement, Starfire hpost assigns the memory addresses, as well as for attaching boards. DR detach operation also assigns memory addresses. The method used to ensure unique addresses is to assign addresses based on slot number. To allow for 2 way inter-board interleaving, these addresses are slot number*8G. The map is a 16-byte array representing the 16 slots. The lower 7 bits of each byte represents the unique address assign to that slot. The high bit is significant on a write-operation only, when set the corresponding slot of the map will be changed with the address represented by the lower 7 bits. On a read operation the returning data represents the current memory map and the high bit of each byte is always 0. On a write operation the byte with the high bit set will be modified. The SNMP agent will perform a consistency check before committing a write operation. Consistency check simply makes sure no two slots will contain the same address if the write is performed. If consistency check fails, the write operation will return an error. |
| INT confNumBulkPower | 1.3.6.1.4.1.34.2.1.2.9 | INTEGER | read-only | The number of bulk power supply in the system. The max # of bulk power supply in a Starfire system is 8. |
| INT confNumCenterplane | 1.3.6.1.4.1.34.2.1.2.5 | INTEGER | read-only | The number of centerplane in the system. The max # centerplane half board in a Starfire system is 2. |
| INT confNumConBrd | 1.3.6.1.4.1.34.2.1.2.4 | INTEGER | read-only | The number of control board in the system. The max # control board in a Starfire system is 2. |
| INT confNumDomain | 1.3.6.1.4.1.34.2.1.2.1 | INTEGER | read-only | The number of domain in the platform. Domains are created with command, domain_create. Domains are removed with command, domain_remove. |
| INT confNumFanTray | 1.3.6.1.4.1.34.2.1.2.8 | INTEGER | read-only | The number of fan tray in the system. The max # of fan trays that can be installed in a Starfire system is 16. |
| INT confNumIoCab | 1.3.6.1.4.1.34.2.1.2.7 | INTEGER | read-only | The number of IO cabinet connected to the system. The max # of IO cabinets that can be connected to a Starfire system is 3. |
| INT confNumProc | 1.3.6.1.4.1.34.2.1.2.3 | INTEGER | read-only | The number of processor in a system board. The max # processors in a Starfire system is 64. |
| INT confNumSuppBrd | 1.3.6.1.4.1.34.2.1.2.6 | INTEGER | read-only | The number of centerplane support board in the system. The max # of centerplane support board in a Starfire system is 2. |
| INT confNumSysBrd | 1.3.6.1.4.1.34.2.1.2.2 | INTEGER | read-only | The number of system board in the platform. The max # system board in a Starfire system is 16. |
| INT confNumSysBrdPower | 1.3.6.1.4.1.34.2.1.2.10 | INTEGER | read-only | The number of system board power supply in the system. The max # of system board power supply for a Starfire system is 16. In Starfire, system board power supply is not a separate entity. It is integrated in a system board. |
| STR confProcList | 1.3.6.1.4.1.34.2.1.2.12 | DisplayString | read-only | A string identifying the processors that are present in the system. The format of the string is: bb.pp-bb.pp-... where bb is the system board number and pp is the processor number within a system board, the delimiter is a dash. |
| STR confSuppBrdList | 1.3.6.1.4.1.34.2.1.2.15 | DisplayString | read-only | A string identifying the centerplane support boards that are present in the system. The format of the string is: xx-xx-... where xx is the centerplane support board number and dash is the delimiter. |
| STR confSysBrdList | 1.3.6.1.4.1.34.2.1.2.11 | DisplayString | read-only | A string identifying the system boards that are present in the system. The format of the string is: xx-xx-.. where xx is the system board number and the delimiter is a dash. |
| STR confSysBrdPowerList | 1.3.6.1.4.1.34.2.1.2.19 | DisplayString | read-only | A string identifying the system board power supplies that are present in the system. The format of the string: xx-xx-... where xx is the system board power supply number and dash is the delimiter. |
| STR domainABusConfig | 1.3.6.1.4.1.34.2.1.3.1.11 | DisplayString | read-only | domainAbusConfig describes the address bus configuration. Its format is a DisplayString in the format of xxS-xxS-... where xx is an address bus [0..3] and S is a status code (see domainProcConfig). |
| INT domainBootProc | 1.3.6.1.4.1.34.2.1.3.1.7 | INTEGER | read-write | The boot processor number of this domain. If the value is -1, that means the domain is not configured/booted. |
| NTF domainChange | 1.3.6.1.4.1.34.0.0 | This trap indicates the domain table has changed. The first two variables (platformName and confNumDomain) will always have an instance value of 0. The remaining variables (domainName, domainNumSysBrd, domainSysBrdList, domainOSVersion, platformType, platformName ) will have an instance value of 0 to confNumDomain - 1. An instance of these remaining variables describe a domain. All variables for this trap are mandatory. | ||
| STR domainDBusConfig | 1.3.6.1.4.1.34.2.1.3.1.12 | DisplayString | read-only | domainDbusConfig describes the data bus configuration. Its format is a DisplayString in the format of xxS-xxS where xx is a data bus [0..1] and S is a status code (see domainProcConfig). |
| domainEntry | 1.3.6.1.4.1.34.2.1.3.1 | not-accessible | A domain table entry. | |
| INT domainIndex | 1.3.6.1.4.1.34.2.1.3.1.1 | INTEGER | read-only | A number assigned to a domain. |
| INT domainInterruptVector | 1.3.6.1.4.1.34.2.1.3.1.8 | INTEGER | read-write | Interrupts to the host processor via JTAG requires 2 pieces of information: the UPA ID of the target CPU and the interrupt number assigned to the bootbus interrupt by the host. The target UPA ID identifies the particular bootbus and the proc ID (0 or 1) to be written into the bootbus interrupt register. The interrupt number is the value to be written into word 0 of the mondo vector of the target CPU. This number is computed by the host kernel. This object is a 13 bit value and is treated as an integer (32 bit) for easy manipulation. |
| STR domainName | 1.3.6.1.4.1.34.2.1.3.1.2 | DisplayString | read-only | Domain name in ASCII format. |
| INT domainNumSysBrd | 1.3.6.1.4.1.34.2.1.3.1.3 | INTEGER | read-only | The number of system board assigned to this domain. |
| STR domainOSVersion | 1.3.6.1.4.1.34.2.1.3.1.5 | DisplayString | read-only | The OS version for this domain. |
| STR domainProcConfig | 1.3.6.1.4.1.34.2.1.3.1.10 | DisplayString | read-only | POST scans both blacklist and redlist files to determine which components should not be used to configure a domain. The content of the blacklist and redlist files along with the final result of a POST run is kept in a data structure, P2OBP, in the boot processor's BBSRAM. The SNMP agent is responsible to retrieve the data structure and extracts the necessary information to produce the result. domainProcConfig describes the processors configuration. Its format is a DisplayString (character string) in the format of xx.yyS-xx.yyS-... where xx is a system board number [0..15], yy is a processor number within a system board [0..3], S is a single character status code, and (dash) '-' is for delimiting multiple components. Valid status code include: F - Tested and Failed M - Missing R - Redlisted B - Blacklisted c - Crunched U - Good but not configured G - Good A - Architecturally missing |
| STR domainProcList | 1.3.6.1.4.1.34.2.1.3.1.6 | DisplayString | read-only | A list of processors belonging to this domain. The format of the string is in: ss.bb-ss.bb-... where ss is the system board number, bb is the processor number within a system board, and dash is the delimiter. |
| STR domainSysBrdConfig | 1.3.6.1.4.1.34.2.1.3.1.9 | DisplayString | read-only | A list of configured system board entries belonging to this domain. The format of the string is: xx-xx where xx is the system board number and dash is the delimiter. |
| STR domainSysBrdList | 1.3.6.1.4.1.34.2.1.3.1.4 | DisplayString | read-only | A list of system board entries belonging to this domain. The number of boards is given by domainNumSysBrd. The format of the string is: xx-xx where xx is the system board number and dash is the delimiter. |
| domainTable | 1.3.6.1.4.1.34.2.1.3 | not-accessible | The domain table. The number of entries in the table is given by conf.confNumDomain. | |
| NTF eddControl | 1.3.6.1.4.1.34.0.1 | This trap indicates the action EDD should be taken. All variables for this trap are mandatory. | ||
| NTF eddState | 1.3.6.1.4.1.34.0.2 | This trap indicates the new state of the EDD. All variables for this trap are mandatory. | ||
| NTF environmentalShutdown | 1.3.6.1.4.1.34.0.59 | This trap indicates that a particular domain has experienced an environmental shutdown. All variables will be provided with this trap. | ||
| NTF fanFail | 1.3.6.1.4.1.34.0.54 | This trap indicates a fan failure. All variables are mandatory for this trap. | ||
| fanGenEntry | 1.3.6.1.4.1.34.2.1.11.1 | not-accessible | A fan tray entry containing information about a fan tray. Each fan entry is uniquely identified by 2 fields: fan tray number and fan number. | |
| INT fanGenIndex | 1.3.6.1.4.1.34.2.1.11.1.1 | INTEGER | read-only | An index into this table. |
| INT fanGenNum | 1.3.6.1.4.1.34.2.1.11.1.3 | INTEGER | read-only | A unique number assigned to a fan inside this tray. |
| INT fanGenPowerControl | 1.3.6.1.4.1.34.2.1.11.1.6 | INTEGER | read-write | The MIB object that is used to either power on or off this fan. The power status of this fan should be read from the fanGenStatus MIB object. On writing, the fan is either turned on or off. |
| INT fanGenSpeed | 1.3.6.1.4.1.34.2.1.11.1.5 | INTEGER | read-write | On reading it returns the speed of this fan inside a fan tray. On writing, it allows one to change the speed of this fan. Nominal is the medium speed the fan will support, and fast is the highest fastest speed the fan will support. |
| INT fanGenStatus | 1.3.6.1.4.1.34.2.1.11.1.4 | INTEGER | read-write | On reading it returns the power status of this fan. On writing it allows an application to turn on/off this fan. |
| fanGenTable | 1.3.6.1.4.1.34.2.1.11 | not-accessible | A table of fan entries. Each fan tray has certain number of fans. The number is represented by ConfMaxFanPerTray. | |
| INT fanGenTraySlotNum | 1.3.6.1.4.1.34.2.1.11.1.2 | INTEGER | read-only | A unique number assigned to a fan tray slot. |
| NTF fanNorm | 1.3.6.1.4.1.34.0.53 | This trap indicates a fan transition from failed to normal. All variables are mandatory for this trap. | ||
| fanTrayGenEntry | 1.3.6.1.4.1.34.2.1.10.1 | not-accessible | A fan tray table entry. | |
| INT fanTrayGenIndex | 1.3.6.1.4.1.34.2.1.10.1.1 | INTEGER | read-only | An index into this table. |
| INT fanTrayGenNum | 1.3.6.1.4.1.34.2.1.10.1.2 | INTEGER | read-only | A unique number assigned to a fan tray. |
| INT fanTrayGenPower | 1.3.6.1.4.1.34.2.1.10.1.3 | INTEGER | read-write | On reading this object, it returns the power status of this fan tray. On writing it turns on/off the fan tray power. |
| fanTrayGenTable | 1.3.6.1.4.1.34.2.1.10 | not-accessible | A table of fan tray entries. | |
| general | 1.3.6.1.4.1.34.2.1 | |||
| NTF heartbeatFailure | 1.3.6.1.4.1.34.0.64 | This trap indicates that a particular domain has experienced a heartbeat_failure. All variables will be provided with this trap. | ||
| ioCabGenEntry | 1.3.6.1.4.1.34.2.1.8.1 | not-accessible | A general I/O cabinet table entry. | |
| INT ioCabGenIndex | 1.3.6.1.4.1.34.2.1.8.1.1 | INTEGER | read-only | An index into this table. |
| INT ioCabGenNum | 1.3.6.1.4.1.34.2.1.8.1.2 | INTEGER | read-only | A unique number assigned to an I/O Cabinet. |
| INT ioCabGenPower | 1.3.6.1.4.1.34.2.1.8.1.3 | INTEGER | read-write | A value identifying the current power state of an IO cabinet and also for powering on and off the I/O cabinet. |
| ioCabGenTable | 1.3.6.1.4.1.34.2.1.8 | not-accessible | A table of general IO cabinet entries. | |
| NTF panic1 | 1.3.6.1.4.1.34.0.61 | This trap indicates that a particular domain has experienced a panic1. All variables will be provided with this trap. | ||
| NTF panic2 | 1.3.6.1.4.1.34.0.62 | This trap indicates that a particular domain has experienced a panic2. All variables will be provided with this trap. | ||
| NTF panicReboot | 1.3.6.1.4.1.34.0.63 | This trap indicates that a particular domain has experienced a panic_reboot. All variables will be provided with this trap. | ||
| platform | 1.3.6.1.4.1.34.2.1.1 | |||
| INT platformAmbientTemp | 1.3.6.1.4.1.34.2.1.1.3 | INTEGER | read-only | The current ambient temperature of the platform. The temperature will be in Celsius. |
| INT platformInterconnectClockFreq | 1.3.6.1.4.1.34.2.1.1.5 | INTEGER | read-only | This member is the current interconnect frequency of the platform. The unit is in Hz. |
| INT platformJtagClockFreq | 1.3.6.1.4.1.34.2.1.1.7 | INTEGER | read-only | This member is the current JTAG clock frequency of the platform. The unit is in Hz. Note: this member is only measurable in the rev-3 control board. If this unit is not available (rev-1 or rev-2 control board), the returning value is set to 0 Hz. |
| INT platformMasterConBrd | 1.3.6.1.4.1.34.2.1.1.11 | INTEGER | read-only | This member is the master control board number. |
| STR platformName | 1.3.6.1.4.1.34.2.1.1.2 | DisplayString | read-only | The name assigned to a physical machine. |
| INT platformProcClockFreq | 1.3.6.1.4.1.34.2.1.1.6 | INTEGER | read-only | This member is the current processor clock frequency of the platform. The unit is in Hz. |
| INT platformReset | 1.3.6.1.4.1.34.2.1.1.4 | INTEGER | read-write | This member resets the platform. |
| INT platformSysClkConBrd | 1.3.6.1.4.1.34.2.1.1.12 | INTEGER | read-only | This member is the control board providing system clock to the platform. |
| INT platformTargetInterconnectClockFreq | 1.3.6.1.4.1.34.2.1.1.8 | INTEGER | read-write | This member is the targeted interconnect clock frequency. The unit is in Hz and the valid range is between 40,000,000 Hz and 120,000,000 Hz. The platformTargetInterconnectClockFreq, platformTargetProcClockMultiple and platformTargetJtagClockFreq must be established prior to system operation. They are used as the guideline to set up the interconnect, processor and JTAG clock frequency of the platform. These value are maintained in SSP persistent store. |
| INT platformTargetJtagClockFreq | 1.3.6.1.4.1.34.2.1.1.10 | INTEGER | read-only | This member is the targeted JTAG clock frequency. The unit is in Hz. See platformTargetSystemClockFreq for more detail. |
| INT platformTargetProcClockMultiple | 1.3.6.1.4.1.34.2.1.1.9 | INTEGER | read-write | This member is the targeted processor clock frequency expressed in terms of a specific factor of the system clock. Possible options are factor of 2 or 3. See platformTargetInterconnectClockFreq for more detail. A possible Blackbird processor would use the 3:2 ratio. |
| INT platformType | 1.3.6.1.4.1.34.2.1.1.1 | INTEGER | read-only | The platform type. Currently, only one platform is defined: Starfire. There is no plan to backport to CS6400 yet. |
| OCT procCommGenCvcInputData | 1.3.6.1.4.1.34.2.1.6.1.15 | OCTET STRING | read-write | The input buffer to cvc. |
| OCT procCommGenCvcOutputData | 1.3.6.1.4.1.34.2.1.6.1.16 | OCTET STRING | read-write | The output buffer to cvc. |
| procCommGenEntry | 1.3.6.1.4.1.34.2.1.6.1 | not-accessible | A processor communication table entry. | |
| INT procCommGenHostMboxCmd | 1.3.6.1.4.1.34.2.1.6.1.9 | INTEGER | read-write | The command of Host-to-SSP mailbox. |
| OCT procCommGenHostMboxData | 1.3.6.1.4.1.34.2.1.6.1.10 | OCTET STRING | read-write | The data in the Host-to-SSP mailbox. This mailbox serves for communication between OBP running on the host and obp_helper running on the SSP. |
| INT procCommGenHostMboxFlag | 1.3.6.1.4.1.34.2.1.6.1.8 | INTEGER | read-write | The flag of Host-to-SSP mailbox. |
| INT procCommGenHostMboxLen | 1.3.6.1.4.1.34.2.1.6.1.7 | INTEGER | read-write | The length of Host-to-SSP mailbox. |
| INT procCommGenIndex | 1.3.6.1.4.1.34.2.1.6.1.1 | INTEGER | read-only | A unique number assigned to each CPU. |
| INT procCommGenNum | 1.3.6.1.4.1.34.2.1.6.1.2 | INTEGER | read-only | A unique number assigned to each CPU. |
| INT procCommGenObpMboxCmd | 1.3.6.1.4.1.34.2.1.6.1.13 | INTEGER | read-write | The command of Obp-to-SSP mailbox. #define SSPC_MULTIPROC 0x0b0b0001 /* Request to release slave CPUs */ #define SSPC_GETTOD 0x0b0b0002 /* Get Unix time of day from SSP */ #define SSPC_GETEEPROM 0x0b0b0003 /* Get EEPROM image from SSP */ #define SSPC_PUTEEPROM 0x0b0b0004 /* Put EEPROM image to SSP */ #define SSPC_UPDREBOOT 0x0b0b0005 /* Invalidate Reboot-info in eeprom */ #define SSPC_MOVECPU0 0x0b0b0006 /* Move Cpu0 Command */ #define SSPC_GETAPDATABASELOC 0x0b0b0007 /* Get AP database location */ #define SSPC_SAVEBOOTPATH 0x0b0b0008 /* Store boot path info */ |
| OCT procCommGenObpMboxData | 1.3.6.1.4.1.34.2.1.6.1.14 | OCTET STRING | read-write | The data in the Obp-to-SSP mailbox. |
| INT procCommGenObpMboxFlag | 1.3.6.1.4.1.34.2.1.6.1.12 | INTEGER | read-write | The flag of Obp-to-SSP mailbox. |
| INT procCommGenObpMboxLen | 1.3.6.1.4.1.34.2.1.6.1.11 | INTEGER | read-write | The length of Obp-to-SSP mailbox. |
| INT procCommGenSspMboxCmd | 1.3.6.1.4.1.34.2.1.6.1.5 | INTEGER | read-write | The command of SSP-to-Host mailbox. |
| OCT procCommGenSspMboxData | 1.3.6.1.4.1.34.2.1.6.1.6 | OCTET STRING | read-write | The data in the SSP-to-Host mailbox. |
| INT procCommGenSspMboxFlag | 1.3.6.1.4.1.34.2.1.6.1.4 | INTEGER | read-write | The flag of SSP-to-Host mailbox. |
| INT procCommGenSspMboxLen | 1.3.6.1.4.1.34.2.1.6.1.3 | INTEGER | read-write | The length of SSP-to-Host mailbox. This mailbox is used to instruct the host to perform a specific command. |
| procCommGenTable | 1.3.6.1.4.1.34.2.1.6 | not-accessible | A table of processor communication entries. | |
| procStateGenEntry | 1.3.6.1.4.1.34.2.1.5.1 | not-accessible | A processor state table entry. | |
| CTR procStateGenHeartbeat | 1.3.6.1.4.1.34.2.1.5.1.3 | Counter | read-only | A counter being updated by the kernel. This serves an as indicator that the kernel is alive and well. |
| INT procStateGenIndex | 1.3.6.1.4.1.34.2.1.5.1.1 | INTEGER | read-only | An index into this table. |
| INT procStateGenNum | 1.3.6.1.4.1.34.2.1.5.1.2 | INTEGER | read-only | A unique number assigned to each CPU. |
| INT procStateGenPgmSignature | 1.3.6.1.4.1.34.2.1.5.1.4 | INTEGER | read-only | This value represents the current program running on a processor. Only 4 programs are identified: POST, Download_helper, OBP, and the kernel. |
| INT procStateGenPgmState | 1.3.6.1.4.1.34.2.1.5.1.5 | INTEGER | read-only | This value represents the current state of the program running on a processor. #define SIGBST_NONE 0 /* no state */ #define SIGBST_RUN 1 /* running */ #define SIGBST_EXIT 2 /* finished */ #define SIGBST_PRERUN 3 /* pre-exec */ #define SIGBST_ARBSTOP 4 /* transient arbstop state */ #define SIGBST_RESET 5 /* reset */ #define SIGBST_POWEROFF 6 /* no power */ #define SIGBST_DETACHED 7 /* spinning in OBP after DR DETACH */ #define SIGBST_CALLBACK 8 /* kernel calling back into OBP */ #define SIGBST_WATCHDOG 9 /* OBP running after watchdog */ #define SIGBST_WATCHDOG_SYNC 10 /* OBP sync after watchdog reset */ #define SIGBST_OFFLINE 11 /* cpu offline */ #define SIGBST_BOOTING 12 /* booting */ #define SIGBST_UNKNOWN 13 /* unknown */ #define SIGBST_XIR 14 /* OBP running after XIR */ #define SIGBST_XIR_SYNC 15 /* OBP trying sync in XIR */ #define SIGBST_SIR 16 /* OBP running after SIR */ #define SIGBST_SIR_SYNC 17 /* OBP trying sync in SIR */ #define SIGBST_REDMODE 18 /* OBP running after REDMODE */ #define SIGBST_REDMODE_SYNC 19 /* OBP trying sync in REDMODE */ #define SIGBST_QUIESCED 20 /* system quiesced */ #define SIGBST_QUIESCE_INPROGRESS 21 /* system quiesce in-progress */ #define SIGBST_RESUME_INPROGRESS 22 /* system resume in-progress */ |
| INT procStateGenPgmSubState | 1.3.6.1.4.1.34.2.1.5.1.6 | INTEGER | read-only | This value represents a finer detail of the current state of the program running on a processor. #define EXIT_NULL 0 #define EXIT_HALT 1 #define EXIT_ENVIRON 2 #define EXIT_REBOOT 3 #define EXIT_PANIC1 4 #define EXIT_PANIC2 5 #define EXIT_HUNG 6 #define EXIT_WATCH 7 #define EXIT_PANIC_REBOOT 8 #define EXIT_WATCHDOG_REBOOT 9 #define EXIT_SOFT_INIT_RESET 10 /* SIR */ #define EXIT_EXTERN_INIT_RESET 11 /* XIR */ #define EXIT_REDMODE_REBOOT 12 /* REDMODE */ #define EXIT_OBP_RESET 13 /* OBP RESET */ |
| procStateGenTable | 1.3.6.1.4.1.34.2.1.5 | not-accessible | A table of processor entries. | |
| INT procStateGenTemp | 1.3.6.1.4.1.34.2.1.5.1.7 | INTEGER | read-only | The processor temperature. |
| products | 1.3.6.1.4.1.34.2 | |||
| NTF reboot | 1.3.6.1.4.1.34.0.60 | This trap indicates that a particular domain has experienced a reboot. All variables will be provided with this trap. | ||
| NTF recordStop | 1.3.6.1.4.1.34.0.57 | This trap indicates that a particular domain has experienced a recordarbstop. All variables will be provided with this trap. | ||
| NTF signatureBlockChange | 1.3.6.1.4.1.34.0.65 | This trap indicates that the signature block has changed. All variables will be provided with this trap. | ||
| NTF sigObpBooting | 1.3.6.1.4.1.34.0.73 | This trap indicates that a proc in a particular domain has experienced a signature change indicating the domain is booting. The signature block specifies signature OBP and state BOOTING. All variables are mandatory for this event. | ||
| ssp | 1.3.6.1.4.1.34.2.3 | |||
| sspPlatformApp | 1.3.6.1.4.1.34.2.3.1 | |||
| INT sspPlatformAppEddControl | 1.3.6.1.4.1.34.2.3.1.1 | INTEGER | read-write | The object identifies the action intended for the EDD. Changing this object will cause the agent to send a eddControl trap. Reading this object returns the last action requested for the EDD. The SNMP agent does not maintain persistent information for this object. It will be initialized to unknown value. |
| INT sspPlatformAppEddState | 1.3.6.1.4.1.34.2.3.1.2 | INTEGER | read-write | The object identifies the current state of the Event Detector Daemon. Changing this object will cause the agent to send a eddState trap. Reading this object returns the last changed state of the EDD. The SNMP agent does not maintain persistent information for this object. It will be initialized to unknown. |
| sun | 1.3.6.1.4.1.34 | |||
| suppBrdGenEntry | 1.3.6.1.4.1.34.2.1.13.1 | not-accessible | A support board table entry. | |
| INT suppBrdGenIndex | 1.3.6.1.4.1.34.2.1.13.1.1 | INTEGER | read-only | A unique number assigned to this support board. |
| INT suppBrdGenNum | 1.3.6.1.4.1.34.2.1.13.1.2 | INTEGER | read-only | A unique number assigned to this support board. |
| INT suppBrdGenPower | 1.3.6.1.4.1.34.2.1.13.1.3 | INTEGER | read-only | Power status of the support board. |
| INT suppBrdGenPowerControl | 1.3.6.1.4.1.34.2.1.13.1.4 | INTEGER | read-write | On reading it returns the power status of this support board power suuply. On writing, it turns on/off this support board power supply. |
| suppBrdGenTable | 1.3.6.1.4.1.34.2.1.13 | not-accessible | A table of support board entries. | |
| NTF suppbrdPowerOff | 1.3.6.1.4.1.34.0.68 | This trap indicates that a support board has been powered off. The platform name will always be provided whereas one or more board number identifiers will be provided. | ||
| NTF suppbrdPowerOn | 1.3.6.1.4.1.34.0.69 | This trap indicates that a support board has been powered on. The platform name will always be provided whereas one or more board number identifiers will be provided. | ||
| INT suppBrdStarfire3p3VDC | 1.3.6.1.4.1.34.2.2.4.1.7 | INTEGER | read-only | The CP 3.3V DC housekeeping voltage in this Starfire support board. |
| INT suppBrdStarfire3p3VDC1Temp | 1.3.6.1.4.1.34.2.2.4.1.3 | INTEGER | read-only | The PS1 temp point of this Starfire support board. |
| INT suppBrdStarfire3p3VDC2Temp | 1.3.6.1.4.1.34.2.2.4.1.4 | INTEGER | read-only | The PS2 temp point of this Starfire support board. |
| INT suppBrdStarfire3p3VDCHK | 1.3.6.1.4.1.34.2.2.4.1.6 | INTEGER | read-only | The 3.3V DC housekeeping voltage in this Starfire support board. |
| INT suppBrdStarfire5VDCHK | 1.3.6.1.4.1.34.2.2.4.1.5 | INTEGER | read-only | The 5V DC voltage in this Starfire support board. |
| suppBrdStarfireEntry | 1.3.6.1.4.1.34.2.2.4.1 | not-accessible | A support board table entry. | |
| INT suppBrdStarfireIndex | 1.3.6.1.4.1.34.2.2.4.1.1 | INTEGER | read-only | An index into this table. |
| INT suppBrdStarfireNum | 1.3.6.1.4.1.34.2.2.4.1.2 | INTEGER | read-only | A unique number assigned to this support board. |
| suppBrdStarfireTable | 1.3.6.1.4.1.34.2.2.4 | not-accessible | A table of support board entries. | |
| NTF suppBrdTemp911 | 1.3.6.1.4.1.34.0.30 | This trap indicates a Centerplane Support Board 911 temperature reading. The platform name and board number variables will always be provided with this trap. Whereas, only those temperature readings that crossed the threshold will be included. | ||
| NTF suppBrdTempBad | 1.3.6.1.4.1.34.0.31 | This trap indicates a Centerplane Support Board bad temperature reading. This means that half the temperature sensors on the board do not report valid temperature readings. For ASIC temperature errors, it is possible that the ASICs are not thermally calibrated. The platform name and board number variables will always be provided with this trap. Whereas, only those temperature readings that crossed the threshold will be included. | ||
| NTF suppBrdTempChange | 1.3.6.1.4.1.34.0.32 | This trap indicates that a Centerplane Support Board temperature reading has changed within a specified delta. The platform name and board number variables will always be provided with this trap. Whereas, only those temperature readings that crossed the threshold will be included. | ||
| NTF suppBrdTempHigh | 1.3.6.1.4.1.34.0.27 | This trap indicates a Centerplane Support Board high temperature reading. The platform name and board number variables will always be provided with this trap. Whereas, only those temperature readings that crossed the threshold will be included. | ||
| NTF suppBrdTempMax | 1.3.6.1.4.1.34.0.29 | This trap indicates a Centerplane Support Board max temperature reading. The platform name and board number variables will always be provided with this trap. Whereas, only those temperature readings that crossed the threshold will be included. | ||
| NTF suppBrdTempNorm | 1.3.6.1.4.1.34.0.26 | This trap indicates a Centerplane Support Board transition from over temperature reading to normal. The platform name and board number variables will always be provided with this trap. Whereas, only those temperature readings that crossed the threshold will be included. | ||
| NTF suppBrdTempWarn | 1.3.6.1.4.1.34.0.28 | This trap indicates a Centerplane Support Board warning temperature reading. The platform name and board number variables will always be provided with this trap. Whereas, only those temperature readings that crossed the threshold will be included. | ||
| NTF suppBrdVoltBad | 1.3.6.1.4.1.34.0.51 | This trap indicates a Centerplane Support Board bad voltage reading. This means that half the voltage sensors on the board do not report valid voltage readings. The platform name and board number variables will always be provided with this trap. Whereas, only those voltage readings that crossed the threshold will be included. | ||
| NTF suppBrdVoltChange | 1.3.6.1.4.1.34.0.52 | This trap indicates a Centerplane Support Board voltage reading has changed within a specified delta. The platform name and board number variables will always be provided with this trap. Whereas, only those voltage readings that crossed the threshold will be included. | ||
| NTF suppBrdVoltMax | 1.3.6.1.4.1.34.0.49 | This trap indicates a Centerplane Support Board max voltage reading. The platform name and board number variables will always be provided with this trap. Whereas, only those voltage readings that crossed the threshold will be included. | ||
| NTF suppBrdVoltMin | 1.3.6.1.4.1.34.0.50 | This trap indicates a Centerplane Support Board Min voltage reading. The platform name and board number variables will always be provided with this trap. Whereas, only those voltage readings that crossed the threshold will be included. | ||
| NTF suppBrdVoltNorm | 1.3.6.1.4.1.34.0.48 | This trap indicates a Centerplane Support Board transition from over voltage reading to normal. The platform name and board number variables will always be provided with this trap. Whereas, only those voltage readings that crossed the threshold will be included. | ||
| sysBrdGenEntry | 1.3.6.1.4.1.34.2.1.4.1 | not-accessible | A system board table entry. | |
| INT sysBrdGenIndex | 1.3.6.1.4.1.34.2.1.4.1.1 | INTEGER | read-only | An index into this table. |
| INT sysBrdGenNum | 1.3.6.1.4.1.34.2.1.4.1.2 | INTEGER | read-only | A unique number assigned to a system board. Index begins with 1. |
| INT sysBrdGenNumProc | 1.3.6.1.4.1.34.2.1.4.1.4 | INTEGER | read-only | Number of processor that are present in this system board. |
| INT sysBrdGenPower | 1.3.6.1.4.1.34.2.1.4.1.3 | INTEGER | read-only | Power status of the system board. To control power to a system board, modify the sysBrdGenPowerControl. |
| INT sysBrdGenPowerControl | 1.3.6.1.4.1.34.2.1.4.1.7 | INTEGER | read-write | On reading it returns the power status of this system board power supply. On writing, it turns on/off this system board power supply. |
| STR sysBrdGenProcList | 1.3.6.1.4.1.34.2.1.4.1.5 | DisplayString | read-only | A string containing the processors list that are present in this system board. The format of the string is: xx-xx where xx is the processor number within a system board, and dash is the delimiter. |
| INT sysBrdGenReset | 1.3.6.1.4.1.34.2.1.4.1.6 | INTEGER | read-write | This member resets the system board. |
| sysBrdGenTable | 1.3.6.1.4.1.34.2.1.4 | not-accessible | System board table. The number host of entries in the table is represented by Conf.ConfNumSysBrd. | |
| NTF sysbrdPowerOff | 1.3.6.1.4.1.34.0.66 | This trap indicates that a system board has been powered off. The platform name will always be provided whereas one or more board number identifiers will be provided. | ||
| NTF sysbrdPowerOn | 1.3.6.1.4.1.34.0.67 | This trap indicates that a system board has been powered on. The platform name will always be provided whereas one or more board number identifiers will be provided. | ||
| INT sysBrdStarfire3p3VDC | 1.3.6.1.4.1.34.2.2.1.1.15 | INTEGER | read-only | The VDD voltage reading of this Starfire system board, which is equivalent to 3.3VDC. |
| INT sysBrdStarfire3p3VDCHK | 1.3.6.1.4.1.34.2.2.1.1.19 | INTEGER | read-only | The 3.3V DC voltage reading of this Starfire system board. |
| INT sysBrdStarfire3p3VDCTemp | 1.3.6.1.4.1.34.2.2.1.1.12 | INTEGER | read-only | The temperature of the PS2 3.3V DC on this Starfire system board. |
| INT sysBrdStarfire5VDC | 1.3.6.1.4.1.34.2.2.1.1.17 | INTEGER | read-only | The 5V DC voltage reading of this Starfire system board. |
| INT sysBrdStarfire5VDCHK | 1.3.6.1.4.1.34.2.2.1.1.16 | INTEGER | read-only | The 5V DC housekeeping voltage reading of this Starfire system board. |
| INT sysBrdStarfire5VDCTemp | 1.3.6.1.4.1.34.2.2.1.1.14 | INTEGER | read-only | The temperature of the PS5 5V DC on this Starfire system board. |
| INT sysBrdStarfireCIC0Temp | 1.3.6.1.4.1.34.2.2.1.1.3 | INTEGER | read-only | The temperature of the CIC0 ASIC on this Starfire system board. |
| INT sysBrdStarfireCIC1Temp | 1.3.6.1.4.1.34.2.2.1.1.4 | INTEGER | read-only | The temperature of the CIC1 ASIC on this Starfire system board. |
| sysBrdStarfireEntry | 1.3.6.1.4.1.34.2.2.1.1 | not-accessible | A system board table entry. | |
| INT sysBrdStarfireIndex | 1.3.6.1.4.1.34.2.2.1.1.1 | INTEGER | read-only | An index into this table. |
| INT sysBrdStarfireMCTemp | 1.3.6.1.4.1.34.2.2.1.1.5 | INTEGER | read-only | The temperature of the MC ASIC on this Starfire system board. |
| INT sysBrdStarfireNum | 1.3.6.1.4.1.34.2.2.1.1.2 | INTEGER | read-only | A unique number assigned to a system board. |
| INT sysBrdStarfirePROC0Temp | 1.3.6.1.4.1.34.2.2.1.1.8 | INTEGER | read-only | The temperature of the PROC0 ASIC on this Starfire system board. |
| INT sysBrdStarfirePROC1Temp | 1.3.6.1.4.1.34.2.2.1.1.9 | INTEGER | read-only | The temperature of the PROC1 ASIC on this Starfire system board. |
| INT sysBrdStarfirePROC2Temp | 1.3.6.1.4.1.34.2.2.1.1.10 | INTEGER | read-only | The temperature of the PROC2 ASIC on this Starfire system board. |
| INT sysBrdStarfirePROC3Temp | 1.3.6.1.4.1.34.2.2.1.1.11 | INTEGER | read-only | The temperature of the PROC3 ASIC on this Starfire system board. |
| sysBrdStarfireTable | 1.3.6.1.4.1.34.2.2.1 | not-accessible | System board table. The number host of entries in the table is represented by Conf.ConfNumSysBrd. | |
| INT sysBrdStarfireVDCCore | 1.3.6.1.4.1.34.2.2.1.1.18 | INTEGER | read-only | The VDD Core voltage reading of this Starfire system board. |
| INT sysBrdStarfireVDCCoreTemp | 1.3.6.1.4.1.34.2.2.1.1.13 | INTEGER | read-only | The temperature of the PS3 VDD Core on this Starfire system board. |
| INT sysBrdStarfireXDB2Temp | 1.3.6.1.4.1.34.2.2.1.1.6 | INTEGER | read-only | The temperature of the XDB2 ASIC on this Starfire system board. |
| INT sysBrdStarfireXDB3Temp | 1.3.6.1.4.1.34.2.2.1.1.7 | INTEGER | read-only | The temperature of the XDB3 ASIC on this Starfire system board. |
| NTF sysBrdTemp911 | 1.3.6.1.4.1.34.0.7 | This trap indicates a System Board 911 temperature reading. The platform name and board number variables will always be provided with this trap. Whereas, only those temperature readings that crossed the threshold will be included. | ||
| NTF sysBrdTempBad | 1.3.6.1.4.1.34.0.8 | This trap indicates a System Board bad temperature reading. This means that at least half the temperature sensors on the board report invalid temperature readings. For ASIC temperature errors, it is possible that the ASICs are not thermally calibrated. The platform name and board number variables will always be provided with this trap. Whereas, only those temperature readings that crossed the threshold will be included. | ||
| NTF sysBrdTempChange | 1.3.6.1.4.1.34.0.9 | This trap indicates that a System Board temperature reading has changed within a specified delta. The platform name and board number variables will always be provided with this trap. Whereas, only those temperature readings that changed will be included. | ||
| NTF sysBrdTempHigh | 1.3.6.1.4.1.34.0.4 | This trap indicates a System Board high temperature reading. The platform name and board number variables will always be provided with this trap. Whereas, only those temperature readings that crossed the threshold will be included. | ||
| NTF sysBrdTempMax | 1.3.6.1.4.1.34.0.6 | This trap indicates a System Board max temperature reading. The platform name and board number variables will always be provided with this trap. Whereas, only those temperature readings that crossed the threshold will be included. | ||
| NTF sysBrdTempNorm | 1.3.6.1.4.1.34.0.3 | This trap indicates a System Board transition from over temperature reading to normal. The platform name and board number will always be provided with this trap. Whereas, only those temperature readings that crossed the threshold will be included. | ||
| NTF sysBrdTempWarn | 1.3.6.1.4.1.34.0.5 | This trap indicates a System Board warning temperature reading. The platform name and board number variables will always be provided with this trap. Whereas, only those temperature readings that crossed the threshold will be included. | ||
| NTF sysBrdVoltBad | 1.3.6.1.4.1.34.0.36 | This trap indicates a System Board bad voltage reading. This means that at least half the voltage sensors on the board report invalid voltage readings. The platform name and board number variables will always be provided with this trap. Whereas, only those voltage readings that crossed the threshold will be included. | ||
| NTF sysBrdVoltChange | 1.3.6.1.4.1.34.0.37 | This trap indicates a System Board voltage reading has changed within a specified delta. The platform name and board number variables will always be provided with this trap. Whereas, only those voltage readings that crossed the threshold will be included. | ||
| NTF sysBrdVoltMax | 1.3.6.1.4.1.34.0.34 | This trap indicates a System Board max voltage reading. The platform name and board number variables will always be provided with this trap. Whereas, only those voltage readings that crossed the threshold will be included. | ||
| NTF sysBrdVoltMin | 1.3.6.1.4.1.34.0.35 | This trap indicates a System Board min voltage reading. The platform name and board number variables will always be provided with this trap. Whereas, only those voltage readings that crossed the threshold will be included. | ||
| NTF sysBrdVoltNorm | 1.3.6.1.4.1.34.0.33 | This trap indicates a System Board transition from low or high power reading to normal. The platform name and board number variables will always be provided with this trap. Whereas, only those voltage readings that crossed the threshold will be included. | ||
| NTF systemConfigurationChange | 1.3.6.1.4.1.34.0.55 | This trap indicates that the system configuration has changed. It indicates what boards have been inserted or removed. The platform name will always be provided but only those lists that change will be included. Only when the system board list changes will the proc list be provided. | ||
| ue10000 | 1.3.6.1.4.1.34.2.2 | |||
| NTF watchdog | 1.3.6.1.4.1.34.0.58 | This trap indicates that a particular domain has experienced a watchdog. All variables will be provided with this trap. |
RFC description
Monitors platform information and environmental conditions on Sun Starfire servers.
Start monitoring CRI server platform (vendor unclear) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.