ALCATEL-IND1-CAPMAN-MIB

All MIBs › ALCATEL-IND1-CAPMAN-MIB

Organization: Alcatel-Lucent

Last Updated: 2009-11-23

Category: Device Management, Vendor: Alcatel-Lucent

Description: Alcatel OmniSwitch capability manager MIB for tracking and managing licensed feature capabilities per chassis.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is ALCATEL-IND1-CAPMAN-MIB?

ALCATEL-IND1-CAPMAN-MIB is an Alcatel-Lucent OmniSwitch (Birds of Prey) MIB for the System Capability Manager, a centralized process that reports hardware capability limits and lets certain features be capped below the hardware maximum. It exposes per-VRF and per-TCAM (ternary content-addressable memory) capability and limit tables, mirror-session capability, software licensing configuration, and IPMC (IP multicast) maximum limits. Its monitoring value is chiefly software/hardware resource management: administrators can track how close a VRF or TCAM context is to its configured or hardware limit, a leading indicator of resource exhaustion that could cause route or ACL programming failures. It is a proprietary Alcatel module that references internal hardware/ASIC resource concepts rather than any external standard. It is typically used on OmniSwitch chassis with multiple VRFs or TCAM-consuming features (ACLs, QoS, multicast) enabled simultaneously. Engineers can download the ALCATEL-IND1-CAPMAN-MIB file directly to load it into their MIB browser.

IPNetwork Monitor allows you to monitor SNMP objects defined in ALCATEL-IND1-CAPMAN-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

Alcatel-Lucent OmniSwitch (Birds of Prey) chassis switches

Monitoring Examples

An administrator would poll alaCapManVrfTable/alaCapManVrfEntry, reading alaCapabilityVrfCapability against alaCapabilityVrfLimit, to see how much VRF capacity is configured versus available on the chassis. Similarly, walking alaCapManTcamTable and comparing alaCapabilityTcamCapability, alaCapabilityTcamMode, and the configured limit reveals whether TCAM resources for ACLs or QoS rules are nearing exhaustion. If alaCapabilityVrfLimit is set below actual usage, new VRF creation would begin failing, a condition this table surfaces before it becomes a production incident.

What Can Be Monitored

VRF capability vs. limit
TCAM capability, mode, and limit
mirror session capability
software licensing configuration
IP multicast (IPMC) maximum limits

Imported Objects

From ALCATEL-IND1-BASE

softentIND1CapMan

OBJECT-IDENTITY

From IF-MIB

InterfaceIndex

From SNMP-FRAMEWORK-MIB

SnmpAdminString

From SNMPv2-CONF

MODULE-COMPLIANCE
OBJECT-GROUP

From SNMPv2-SMI

Integer32
MODULE-IDENTITY
OBJECT-IDENTITY
OBJECT-TYPE
Unsigned32

From SNMPv2-TC

MacAddress
RowStatus

OIDs

OID symbolic	OID numeric	Type	Access	Description
alcatelIND1CapManMIB	1.3.6.1.4.1.6486.801.1.2.1.60.1			This module describes an authoritative enterprise-specific Simple Network Management Protocol (SNMP) Management Information Base (MIB): For the Birds Of Prey Product Line System Capability Manager, to allow for system control and limitation setting, of different, features through out the system. Capability manager is a centralized process which provides hardware information and capability to other processes. To optimize the system performance , certain features may be configured to a lower than the hardware limit through capability manager. The right to make changes in specification and other information contained in this document without prior notice is reserved. No liability shall be assumed for any incidental, indirect, special, or consequential damages whatsoever arising from or related to this document or the information contained herein. Vendors, end-users, and other interested parties are granted non-exclusive license to use this specification in connection with management of the products for which it is intended to be used. Copyright (C) 1995-2009 Alcatel-Lucent ALL RIGHTS RESERVED WORLDWIDE
alcatelIND1CapManMIBObjects	1.3.6.1.4.1.6486.801.1.2.1.60.1.1			Branch For System limitation setting , through Capability Manager Subsystem Managed Objects.
alaCapabilityManager	1.3.6.1.4.1.6486.801.1.2.1.60.1.1.1
alaCapManVrfTable	1.3.6.1.4.1.6486.801.1.2.1.60.1.1.1.1		not-accessible	A list of capabilities related to vrf limits.
alaCapManVrfEntry	1.3.6.1.4.1.6486.801.1.2.1.60.1.1.1.1.1		not-accessible	A Capability Manager VRF entry.
INT alaCapabilityVrfContext	1.3.6.1.4.1.6486.801.1.2.1.60.1.1.1.1.1.1	INTEGER	not-accessible	Context of the change being done on vrf capability. global is a setting which applies throughout the chassis. primary is for the primary connection, and subsidiary, is for all other connection.
INT alaCapabilityVrfCapability	1.3.6.1.4.1.6486.801.1.2.1.60.1.1.1.1.1.2	INTEGER	not-accessible	Identifies a vrf related capability.
I32 alaCapabilityVrfLimit	1.3.6.1.4.1.6486.801.1.2.1.60.1.1.1.1.1.3	Integer32	read-write	The actual limitation applied to the vrf capability.
alaCapManTcamTable	1.3.6.1.4.1.6486.801.1.2.1.60.1.1.1.2		not-accessible	A list of capabilities related to TCAM limits.
alaCapManTcamEntry	1.3.6.1.4.1.6486.801.1.2.1.60.1.1.1.2.1		not-accessible	A Capability Manager Tcam entry.
INT alaCapabilityTcamContext	1.3.6.1.4.1.6486.801.1.2.1.60.1.1.1.2.1.1	INTEGER	not-accessible	Context of the change being done on TCAM capability.
INT alaCapabilityTcamCapability	1.3.6.1.4.1.6486.801.1.2.1.60.1.1.1.2.1.2	INTEGER	not-accessible	Identifies a TCAM related capability.
I32 alaCapabilityTcamMode	1.3.6.1.4.1.6486.801.1.2.1.60.1.1.1.2.1.3	Integer32	read-write	Selected Tcam mode.
alaCapManMirrorTable	1.3.6.1.4.1.6486.801.1.2.1.60.1.1.1.3		not-accessible	A list of capabilities related to mirroring limits.
alaCapManMirrorEntry	1.3.6.1.4.1.6486.801.1.2.1.60.1.1.1.3.1		not-accessible	A Capability Manager Mirror entry.
INT alaCapabilityMirrorContext	1.3.6.1.4.1.6486.801.1.2.1.60.1.1.1.3.1.1	INTEGER	not-accessible	Context of the change being done on Mirroring capability.
INT alaCapabilityMirrorCapability	1.3.6.1.4.1.6486.801.1.2.1.60.1.1.1.3.1.2	INTEGER	not-accessible	Identifies a Mirroring related capability.
I32 alaCapabilityMirrorLimit	1.3.6.1.4.1.6486.801.1.2.1.60.1.1.1.3.1.3	Integer32	read-write	Number of monitoring sessions.
alaCapManSourceLearningTable	1.3.6.1.4.1.6486.801.1.2.1.60.1.1.1.4		not-accessible	A list of capabilities related to source learning modes.
alaCapManSourceLearningEntry	1.3.6.1.4.1.6486.801.1.2.1.60.1.1.1.4.1		not-accessible	A Capability Manager SourceLearning entry.
INT alaCapabilitySourceLearningContext	1.3.6.1.4.1.6486.801.1.2.1.60.1.1.1.4.1.1	INTEGER	not-accessible	Context of the change being done on source learning capability.
INT alaCapabilitySourceLearningCapability	1.3.6.1.4.1.6486.801.1.2.1.60.1.1.1.4.1.2	INTEGER	not-accessible	Identifies a source learning related capability.
INT alaCapabilitySourceLearningMode	1.3.6.1.4.1.6486.801.1.2.1.60.1.1.1.4.1.3	INTEGER	read-write	whether source learning should operate in centralized or distributed mode.
alaCapManHashControlCommands	1.3.6.1.4.1.6486.801.1.2.1.60.1.1.1.5			Branch For Hash-control commands.
INT alaCapManHashMode	1.3.6.1.4.1.6486.801.1.2.1.60.1.1.1.5.1	INTEGER	read-write	When set to brief, Hash mode is enabled. When set to Extended, Hash mode is disabled.
INT alaCapManUdpTcpPortMode	1.3.6.1.4.1.6486.801.1.2.1.60.1.1.1.5.2	INTEGER	read-write	The control is used to enable or disable UDP TCP port hashing. This option is applicable only when Hash mode is set to disabled (i.e. extended)
INT alaCapManNonUCHashControl	1.3.6.1.4.1.6486.801.1.2.1.60.1.1.1.5.3	INTEGER	read-write	This control is used to enable/disable Load balance for non unicast traffic.
alaCapManSwLicensingConfig	1.3.6.1.4.1.6486.801.1.2.1.60.1.1.1.6
INT alaCapManSwLicensingAction	1.3.6.1.4.1.6486.801.1.2.1.60.1.1.1.6.1	INTEGER	read-write	Object to define the action related to software licensing.
STR alaCapManSwLicensingActionArg	1.3.6.1.4.1.6486.801.1.2.1.60.1.1.1.6.2	SnmpAdminString	read-write	Argument of the software licensing action.
INT alaCapManVcSwLicensingAction	1.3.6.1.4.1.6486.801.1.2.1.60.1.1.1.6.3	INTEGER	read-write	Object to define the action related to software licensing.
STR alaCapManVcSwLicensingActionArg	1.3.6.1.4.1.6486.801.1.2.1.60.1.1.1.6.4	SnmpAdminString	read-write	Argument of the software licensing action.
alaCapManSwLicensingInfoTable	1.3.6.1.4.1.6486.801.1.2.1.60.1.1.1.7		not-accessible	Table of valid application license information
alaCapManSwLicensingInfoEntry	1.3.6.1.4.1.6486.801.1.2.1.60.1.1.1.7.1		not-accessible	Information of valid license applications
U32 alaLicenseId	1.3.6.1.4.1.6486.801.1.2.1.60.1.1.1.7.1.1	Unsigned32	not-accessible	Number identifying a licence. This number is automatically generated in the license generation process.
STR alaLicensedApplication	1.3.6.1.4.1.6486.801.1.2.1.60.1.1.1.7.1.2	SnmpAdminString	read-only	String displaying the application for which this license is valid.
INT alaLicenseType	1.3.6.1.4.1.6486.801.1.2.1.60.1.1.1.7.1.3	INTEGER	read-only	License of an application can be either Permamnent or Demo. The value of this indicated the type of this license.
I32 alaLicenseTimeRemaining	1.3.6.1.4.1.6486.801.1.2.1.60.1.1.1.7.1.4	Integer32	read-only	Number of days remaining to evaluate this demo license. For permanent license this is not applicable.
alaCapabilityIpmcMaxLimits	1.3.6.1.4.1.6486.801.1.2.1.60.1.1.1.8
I32 alaCapabilityIpmcMaxAdminLimit	1.3.6.1.4.1.6486.801.1.2.1.60.1.1.1.8.1	Integer32	read-write	Configured limit on maximum IPMC Table Entry count set by the user.
I32 alaCapabilityIpmcMaxOperLimit	1.3.6.1.4.1.6486.801.1.2.1.60.1.1.1.8.2	Integer32	read-only	Operating limit on maximum IPMC Table Entry count. This number is calculated based on the configured number and existing module types.
alaCapManFeatureControlCommands	1.3.6.1.4.1.6486.801.1.2.1.60.1.1.1.9
INT alaCapManDcbCfgMode	1.3.6.1.4.1.6486.801.1.2.1.60.1.1.1.9.1	INTEGER	read-only	The control is used to globally enable or disable DCB feature
INT alaCapManDcbOprMode	1.3.6.1.4.1.6486.801.1.2.1.60.1.1.1.9.2	INTEGER	read-only	operating mode of DCB feature
alaCapManVcSwLicensingInfoTable	1.3.6.1.4.1.6486.801.1.2.1.60.1.1.1.10		not-accessible	Table of valid application license information
alaCapManVcSwLicensingInfoEntry	1.3.6.1.4.1.6486.801.1.2.1.60.1.1.1.10.1		not-accessible	Information of valid license applications
OCT alaVcLicensedSerialNum	1.3.6.1.4.1.6486.801.1.2.1.60.1.1.1.10.1.1	OCTET STRING	not-accessible	String displaying the serial number for which this license is valid.
MAC alaVcLicensedMacAddress	1.3.6.1.4.1.6486.801.1.2.1.60.1.1.1.10.1.2	MacAddress	not-accessible	String displaying the MAC address for which this license is valid.
INT alaVcLicenseType	1.3.6.1.4.1.6486.801.1.2.1.60.1.1.1.10.1.3	INTEGER	read-only	License of an application can be either Permamnent or Demo. The value of this indicated the type of this license.
I32 alaVcLicenseVcSlot	1.3.6.1.4.1.6486.801.1.2.1.60.1.1.1.10.1.4	Integer32	read-only	The virtual chassis unit ID + ni slot number.
I32 alaVcLicenseBitMap	1.3.6.1.4.1.6486.801.1.2.1.60.1.1.1.10.1.5	Integer32	read-only	The chassis license bit map. 0x00000001 ADVANCD 0x00000002 DATACENTER 0x00000004 U16L
I32 alaVcLicenseTimeRemain	1.3.6.1.4.1.6486.801.1.2.1.60.1.1.1.10.1.6	Integer32	read-only	Number of days remaining for demo license. For permanent license this is not applicable.
alaCapManConformance	1.3.6.1.4.1.6486.801.1.2.1.60.1.1.2
alaCapManGroups	1.3.6.1.4.1.6486.801.1.2.1.60.1.1.2.1
alaCapManVrfTableGroup	1.3.6.1.4.1.6486.801.1.2.1.60.1.1.2.1.1			Mandatory objects for VRF Table group
alaCapManTcamTableGroup	1.3.6.1.4.1.6486.801.1.2.1.60.1.1.2.1.2			Mandatory objects for TCAM Table group
alaCapManMirrorTableGroup	1.3.6.1.4.1.6486.801.1.2.1.60.1.1.2.1.3			Mandatory objects for Mirroring Table group
alaCapManSourceLearningTableGroup	1.3.6.1.4.1.6486.801.1.2.1.60.1.1.2.1.4			Mandatory objects for source learning Table group
alaCapManHashControlGroup	1.3.6.1.4.1.6486.801.1.2.1.60.1.1.2.1.5			Capability Manager Hash Control Group.
alaCapManSwLicensingGroup	1.3.6.1.4.1.6486.801.1.2.1.60.1.1.2.1.6			Mandatory objects for software licensing group
alaCapManSwLicensingInfoGroup	1.3.6.1.4.1.6486.801.1.2.1.60.1.1.2.1.7			Mandatory objects for software licensing table info group
alaCapabilityIpmcMaxLimitsGroup	1.3.6.1.4.1.6486.801.1.2.1.60.1.1.2.1.8			Mandatory objects for MAX IPMC max group
alaCapManDcbCfgModeGroup	1.3.6.1.4.1.6486.801.1.2.1.60.1.1.2.1.9			Created to keep SNMP4J compiler Happy
alaVcLicenseCfgGroup	1.3.6.1.4.1.6486.801.1.2.1.60.1.1.2.1.10			Created to keep SNMP4J compiler Happy
alaCapManCompliances	1.3.6.1.4.1.6486.801.1.2.1.60.1.1.2.2
alaCapManCompliance	1.3.6.1.4.1.6486.801.1.2.1.60.1.1.2.2.1			The compliance statement for support of Capability Manager.

RFC description

Alcatel-Lucent capability manager MIB for system-wide feature limitation and hardware resource configuration.

Start monitoring Alcatel-Lucent Enterprise OmniSwitch switches with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download ALCATEL-IND1-CAPMAN-MIB

What Is ALCATEL-IND1-CAPMAN-MIB?

Supported Devices

Monitoring Examples

What Can Be Monitored

This MIB depends on

Related MIBs

RFC description