CRI-SERVER-MIB :: cbStarfireSen0Temp

MIB Reference — IPNetwork Monitor · Updated September 14, 2026

All MIBsCRI-SERVER-MIBcbStarfireSen0Temp

cbStarfireSen0Temp

Module: CRI-SERVER-MIB

OID (symbolic): CRI-SERVER-MIB::cbStarfireSen0Temp

OID (numeric): 1.3.6.1.4.1.34.2.2.2.1.7

Node type: OBJECT-TYPE

Type: INTEGER

Access: read-only

Description: The temperature of the 1st temperature sensor.

What is cbStarfireSen0Temp?

This read-only INTEGER reports the temperature measured by the control board's 1st temperature sensor. An administrator uses this general-purpose sensor reading alongside the board's other two sensors to build a fuller picture of ambient conditions across the board. For example, Sen0 reading noticeably higher than Sen1 and Sen2 would suggest a localized hotspot near that sensor's position on the board.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.34.2.2.2.1.7
snmpwalk -v2c -c public <target> CRI-SERVER-MIB::cbStarfireSen0Temp

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.34.2.2.2.1.7.1
snmpget -v2c -c public <target> CRI-SERVER-MIB::cbStarfireSen0Temp.1

Start monitoring CRI server platform (vendor unclear) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CRI-SERVER-MIB::cbStarfireSen0Temp OID value, configure state conditions and alerts, and monitor any CRI server platform (vendor unclear) from a single console.

OID Breakdown

Upper-level ancestors (6 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
Numeric OIDNameModule
1.3.6.1.4.1.34sunCRI-SERVER-MIB
1.3.6.1.4.1.34.2productsCRI-SERVER-MIB
1.3.6.1.4.1.34.2.2ue10000CRI-SERVER-MIB
1.3.6.1.4.1.34.2.2.2cbStarfireTableCRI-SERVER-MIB
1.3.6.1.4.1.34.2.2.2.1cbStarfireEntryCRI-SERVER-MIB
1.3.6.1.4.1.34.2.2.2.1.7cbStarfireSen0TempCRI-SERVER-MIB