All MIBs › CISCOSB-rndApplications
Organization: Cisco Small Business
Last Updated: 2004-06-01
Category: Domain: System Management, Vendor: Cisco
Description: Manages application-level services and application monitoring on Cisco Small Business devices.
Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.
What Is CISCOSB-rndApplications?
CISCOSB-rndApplications is a Cisco Small Business private MIB for configuring and monitoring generic application-level status of remote network elements from the perspective of the local switch, functioning as a lightweight built-in monitoring/polling subsystem. It exposes a table of monitored elements (each with an address, SNMP community, and label) plus alarm enabling, alarm interval, default polling interval, and a default log file, essentially letting the device itself poll other SNMP agents and raise alarms. Its monitoring role is about software-level service/reachability status of other elements rather than the local device's own hardware, effectively turning the switch into a mini network monitoring agent. It depends implicitly on basic SNMP polling of arbitrary remote object identifiers (rndMonitoredObjectIdentifier), reusing standard SNMP GET semantics rather than a specific external MIB standard. It is typically deployed on Cisco Small Business switches used in SMB networks where a lightweight built-in alarm/polling capability substitutes for a dedicated NMS. Engineers can download the CISCOSB-rndApplications file directly to load it into their MIB browser.
IPNetwork Monitor allows you to monitor SNMP objects defined in CISCOSB-rndApplications. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.
Supported Devices
- Cisco Small Business switch (Cisco SB series)
Monitoring Examples
An administrator would populate rndMonitoredElementsTable with entries specifying rndMonitoredElementAddress, rndMonitoredElementCommunity, and rndMonitoredObjectIdentifier to have the switch itself poll a remote device's OID at rndDefaultPollingInterval. rndMonitoredElementStatus would be checked to see if the monitored element is currently reachable or has failed to respond. rndAlarmEnabling and rndAlarmInterval control whether and how often alarms are raised when a monitored element's status changes, useful for detecting an unreachable upstream device without a full NMS deployment.
What Can Be Monitored
- monitored element reachability status
- polling interval configuration
- alarm enable/interval settings
- monitored OID value
- default log file target
This MIB depends on
Related MIBs
Imported Objects
From CISCOSB-MIB
| switch001 | MODULE-IDENTITY |
From IF-MIB
| InterfaceIndex | |
| InterfaceIndexOrZero | |
| ifIndex | OBJECT-TYPE |
From INET-ADDRESS-MIB
| InetAddress | |
| InetAddressType |
From SNMPv2-SMI
| Counter32 | |
| IpAddress | |
| MODULE-IDENTITY | |
| OBJECT-TYPE | |
| Unsigned32 |
From SNMPv2-TC
| DisplayString | |
| RowStatus | |
| TEXTUAL-CONVENTION | |
| TruthValue |
OIDs
| OID symbolic | OID numeric | Type | Access | Description |
|---|---|---|---|---|
| rlMibInstances | 1.3.6.1.4.1.9.6.1.101.35.2.11 | |||
| rlMibTableInstancesInfoEntry | 1.3.6.1.4.1.9.6.1.101.35.2.11.1.1 | not-accessible | A row with index rlMibTableInstancesInfoTableName = 'xTable' contains information on current instances in 'xTable'. | |
| INT rlMibTableInstancesInfoNumOfInstances | 1.3.6.1.4.1.9.6.1.101.35.2.11.1.1.2 | INTEGER | read-only | Get operation on this object will retreive the current number of instances in the MIB table specified by the index rlMibTableInstancesInfoTableName. |
| rlMibTableInstancesInfoTable | 1.3.6.1.4.1.9.6.1.101.35.2.11.1 | not-accessible | A table for retreiving information on the current instances in a requested MIB table. | |
| STR rlMibTableInstancesInfoTableName | 1.3.6.1.4.1.9.6.1.101.35.2.11.1.1.1 | DisplayString | not-accessible | The name of the MIB table (for examle: snmpCommunityTable) |
| rlMibTree | 1.3.6.1.4.1.9.6.1.101.35.2.10 | |||
| rlMibTreeEntry | 1.3.6.1.4.1.9.6.1.101.35.2.10.1.1 | not-accessible | Each row shows a tree relationsship in the MIB. | |
| STR rlMibTreeFather | 1.3.6.1.4.1.9.6.1.101.35.2.10.1.1.1 | DisplayString | not-accessible | The father in a tree relation ship. |
| STR rlMibTreeGrandFather | 1.3.6.1.4.1.9.6.1.101.35.2.10.1.1.5 | DisplayString | read-only | The grand father (i.e father's father) in a tree relation ship. |
| STR rlMibTreeSon | 1.3.6.1.4.1.9.6.1.101.35.2.10.1.1.3 | DisplayString | read-only | The son in a tree relation ship. |
| INT rlMibTreeSonIndex | 1.3.6.1.4.1.9.6.1.101.35.2.10.1.1.2 | INTEGER | not-accessible | Running index for this table. |
| OID rlMibTreeSonObjectId | 1.3.6.1.4.1.9.6.1.101.35.2.10.1.1.4 | OBJECT IDENTIFIER | read-only | The object identifier of the son in a tree relation ship. |
| rlMibTreeTable | 1.3.6.1.4.1.9.6.1.101.35.2.10.1 | not-accessible | This reflects the MIB tree of the device. | |
| INT rlSnmpServCreateTestPool | 1.3.6.1.4.1.9.6.1.101.35.2.9.7 | INTEGER | read-write | This variable enables the authorized user to indicate that after its reset the device should create a buffer pool for SNMPServ process PDU testing. |
| OID rlSnmpServITCbindClients | 1.3.6.1.4.1.9.6.1.101.35.2.9.8 | OBJECT IDENTIFIER | read-write | This variable enables the authorized user to to indicate that after its reset the device should create ITC clients for SnmpServ data requests clients. The semantics of this variable is as follows: subidentifier 2*n indicates whether the client n is synchronous(1) or asynchronous(2) subidentifier 2*n+1 indicates the number of simulatneous requests expected by client n. |
| INT rlSnmpServTestRequest | 1.3.6.1.4.1.9.6.1.101.35.2.9.5 | INTEGER | read-write | This variable enables the authorized user to test the SNMP SERV package. |
| OCT rlSnmpServTestResponse | 1.3.6.1.4.1.9.6.1.101.35.2.9.6 | OCTET STRING | read-only | This variable enables the authorized user to retrieve the results of a the SNMP SERV package test. |
| rlSnmpTestSimulatedVariables | 1.3.6.1.4.1.9.6.1.101.35.2.9.9 | |||
| rlTstBasicRateEntry | 1.3.6.1.4.1.9.6.1.101.35.2.9.10.1 | not-accessible | An entry in the rlTstBasicRateTable. | |
| INT rlTstBasicRateIfMode | 1.3.6.1.4.1.9.6.1.101.35.2.9.10.1.3 | INTEGER | read-write | |
| INT rlTstBasicRateIfType | 1.3.6.1.4.1.9.6.1.101.35.2.9.10.1.1 | INTEGER | read-write | |
| INT rlTstBasicRateLineTopology | 1.3.6.1.4.1.9.6.1.101.35.2.9.10.1.2 | INTEGER | read-write | |
| INT rlTstBasicRateSignalMode | 1.3.6.1.4.1.9.6.1.101.35.2.9.10.1.4 | INTEGER | read-write | |
| rlTstBasicRateTable | 1.3.6.1.4.1.9.6.1.101.35.2.9.10 | not-accessible | Table for testing SNMP agent. | |
| INT rndAlarmEnabling | 1.3.6.1.4.1.9.6.1.101.35.2.2.1 | INTEGER | read-write | Indicates whether alarms should be issued to the high-level NMS |
| INT rndAlarmInterval | 1.3.6.1.4.1.9.6.1.101.35.2.2.2 | INTEGER | read-write | Indicates the minimal period of time which must pass after issuing an alarm before issuing the same alarm again. |
| INT rndAlarmMaxTreshold | 1.3.6.1.4.1.9.6.1.101.35.2.4.1.8 | INTEGER | read-write | The value of the monitored object instance, the exceeding of which will cause the generation of an alarm to the high-level management station. |
| INT rndAlarmMinTreshold | 1.3.6.1.4.1.9.6.1.101.35.2.4.1.9 | INTEGER | read-write | If the value of the monitored object instance falls below the value assigned to rndAlarmMinTreshold, an alarm to the high-level management station will be issued. |
| rndAlarmOptions | 1.3.6.1.4.1.9.6.1.101.35.2.2 | |||
| rndApplications | 1.3.6.1.4.1.9.6.1.101.35 | The private MIB module definition for switch001 applications MIB. | ||
| STR rndDefaultLogFile | 1.3.6.1.4.1.9.6.1.101.35.2.3.1.5 | DisplayString | read-write | The default file path of the log-file which will contain the polling results for the monitored element. If no other file path is specifically assigned to the monitored object instance, this log-file will be used. |
| INT rndDefaultPollingInterval | 1.3.6.1.4.1.9.6.1.101.35.2.3.1.4 | INTEGER | read-write | The default period of time between two consecutive pollings of the monitored element for the value of an object instance. If no other polling interval is specifically assigned to the monitored object instance, this one will be used |
| ROW rndDeleteValueEntryStatus | 1.3.6.1.4.1.9.6.1.101.35.2.8.1.4 | RowStatus | read-write | It is used to delete an entry from this table. |
| rndDeleteValuesEntry | 1.3.6.1.4.1.9.6.1.101.35.2.8.1 | not-accessible | The row definition for the rndDeleteValuesTable table. | |
| rndDeleteValuesTable | 1.3.6.1.4.1.9.6.1.101.35.2.8 | not-accessible | This table indicates which MIB variables are row status fields which control the status of the entry to which they belong. This table also indicates which (integer!) value of these MIB variables will cause, if present in a SNMP SET PDU, the deletion of the conceptual row instance to which the SET MIB variable instance belongs. | |
| INT rndEraseSimulatedConfiguration | 1.3.6.1.4.1.9.6.1.101.35.2.7 | INTEGER | read-write | eraseSimulatedConfiguration instructs the MLNMS to erase all the simulated configuration from its configuration data-base (CDB). This the only accepted value for SNMP SET statements and will never be returned in SNMP GET statements. simulatedConfigurationPresent indicates that the MLNMS currently has a simulated configuration. simulatedConfigurationErased indicates that the MLNMS currently has no simulated configuration. |
| T/F rndHardwareConfiguration | 1.3.6.1.4.1.9.6.1.101.35.2.6 | TruthValue | read-write | Indicates whether the current SET SNMP PDU contains hardware configuration (i.e., normally read-only variables). SET of such variables in the Mid-level management station will be allowed only if this variable is included in the SNMP PDU and its value is true. Its value as returned in a GET SNMP PDU will always be false. |
| rndMibFileEntry | 1.3.6.1.4.1.9.6.1.101.35.2.5.1 | not-accessible | The row definition for this table. | |
| ROW rndMibFileEntryStatus | 1.3.6.1.4.1.9.6.1.101.35.2.5.1.4 | RowStatus | read-write | It is used to manage the MIB files table. |
| INT rndMibFileIndex | 1.3.6.1.4.1.9.6.1.101.35.2.5.1.1 | INTEGER | read-only | The number of the MIB file in the list MIB files supported by the Mid-Level management station. The order of the MIB files in this list must reflect the the IMPORT relation between the MIBS contained in the MIB files, i.e., if MIB A IMPORTS FROM MIB B, the file containing MIB A must have a lesser index in this table than the file containing MIB B. |
| STR rndMibFilePath | 1.3.6.1.4.1.9.6.1.101.35.2.5.1.2 | DisplayString | read-write | The path of the MIB file in the MIB file server. |
| INT rndMibFileRefresh | 1.3.6.1.4.1.9.6.1.101.35.2.5.1.3 | INTEGER | read-write | Indicates if the file should be fetched after setting this entry from the MIB file server. |
| rndMibFilesTable | 1.3.6.1.4.1.9.6.1.101.35.2.5 | not-accessible | The table of monitored object instances. Each monitored object instance belongs to a monitored element previously entered in the rndMonitoredElementsTable. | |
| rndMidLevelManagement | 1.3.6.1.4.1.9.6.1.101.35.2 | |||
| STR rndMonitoredElement | 1.3.6.1.4.1.9.6.1.101.35.2.4.1.1 | DisplayString | read-only | A label assigned by the network manager to a monitored element to which this monitored object instance belongs. This label must have been previously entered in an instance of rndMonitoredElementLabel |
| IP rndMonitoredElementAddress | 1.3.6.1.4.1.9.6.1.101.35.2.3.1.1 | IpAddress | read-only | The IP address of the monitored element |
| STR rndMonitoredElementCommunity | 1.3.6.1.4.1.9.6.1.101.35.2.3.1.2 | DisplayString | read-write | The community of the monitored element |
| rndMonitoredElementEntry | 1.3.6.1.4.1.9.6.1.101.35.2.3.1 | not-accessible | The row definition for this table. | |
| STR rndMonitoredElementLabel | 1.3.6.1.4.1.9.6.1.101.35.2.3.1.3 | DisplayString | read-write | The label assigned by the network manager to the monitored element |
| rndMonitoredElementsTable | 1.3.6.1.4.1.9.6.1.101.35.2.3 | not-accessible | The table of monitored elements of the network | |
| ROW rndMonitoredElementStatus | 1.3.6.1.4.1.9.6.1.101.35.2.3.1.6 | RowStatus | read-write | It is used to manage the monitored elements table and indicates the current monitoring status of an element. |
| INT rndMonitoredIntegerInstance | 1.3.6.1.4.1.9.6.1.101.35.2.4.1.12 | INTEGER | read-write | |
| OID rndMonitoredObjectIdentifier | 1.3.6.1.4.1.9.6.1.101.35.2.4.1.4 | OBJECT IDENTIFIER | read-write | The object identifier of the object to which the monitored object instance belongs. An instance of rndMonitoredObjectIdentifier need not be assigned any value, if the corresponding instance of rndMonitoredObjectName is assigned a value, since any one of these, together with the object instance identifier, suffices to unambigously identify the monitored object instance. |
| OID rndMonitoredObjectInstance | 1.3.6.1.4.1.9.6.1.101.35.2.4.1.5 | OBJECT IDENTIFIER | read-write | The instance identifier (key) of the monitored object instance. |
| STR rndMonitoredObjectInstanceLabel | 1.3.6.1.4.1.9.6.1.101.35.2.4.1.2 | DisplayString | read-only | The label assigned by the network manager to the monitored object instance |
| STR rndMonitoredObjectName | 1.3.6.1.4.1.9.6.1.101.35.2.4.1.3 | DisplayString | read-write | The symbolic object type name of the object to which the monitored object instance belongs (as it appears the MIB module definition). In case of ambiguity the : format should be used. An instance of rndMonitoredObjectName need not be assigned any value, if the corresponding instance of rndMonitoredObjectIdentifier is assigned a value, since any one of these, together with the object instance identifier, suffices to unambigously identify the monitored object instance. |
| INT rndMonitoredObjectSyntax | 1.3.6.1.4.1.9.6.1.101.35.2.4.1.6 | INTEGER | read-write | The syntax of the monitored object instance (i.e., the syntax of the object type of the object to which the monitored instance belongs). Need not be assigned any value if the corresponding instance of rndMonitoredObjectName has been assigned a value |
| rndMonitoringEntry | 1.3.6.1.4.1.9.6.1.101.35.2.4.1 | not-accessible | The row definition for this table. | |
| ROW rndMonitoringEntryStatus | 1.3.6.1.4.1.9.6.1.101.35.2.4.1.11 | RowStatus | read-write | It is used to manage the monitored object instances table and indicates the current monitoring status of an object instance. |
| INT rndMonitoringInterval | 1.3.6.1.4.1.9.6.1.101.35.2.4.1.7 | INTEGER | read-write | The period of time between two consecutive retrievals of the monitored object instance's value. |
| STR rndMonitoringLogfile | 1.3.6.1.4.1.9.6.1.101.35.2.4.1.10 | DisplayString | read-write | The entire path of the file in which the results of the monitoring of this object instance should be recorded. |
| rndMonitoringTable | 1.3.6.1.4.1.9.6.1.101.35.2.4 | not-accessible | The table of monitored object instances. Each monitored object instance belongs to a monitored element previously entered in the rndMonitoredElementsTable. | |
| INT rndNotSupportedField | 1.3.6.1.4.1.9.6.1.101.35.2.9.1.1.3 | INTEGER | read-only | Variable for not supported simulation. |
| INT rndRowDeleteValue | 1.3.6.1.4.1.9.6.1.101.35.2.8.1.3 | INTEGER | read-write | The value of the variable identified by rndRowStatusVariableName and/or rndRowStatusObjectId, which, if present in a SNMP SET PDU, will cause the deletion of the conceptual row instance which the SET MIB variable instance belongs. |
| OID rndRowStatusObjectId | 1.3.6.1.4.1.9.6.1.101.35.2.8.1.2 | OBJECT IDENTIFIER | read-write | The object id of the row status field. If the rndRowStatusVariableName is a name present in the MIBs loaded into the MLNMS, this MIB variable is not required, but if given, it must match the object id known to the MLNMS. The variable identified by rndRowStatusVariableName and/or rndRowStatusObjectId must be a read-write MIB variable of type INTEGER which belongs to an entry (i.e, is a child of a MIB variable of type SEQUENCE). |
| STR rndRowStatusVariableName | 1.3.6.1.4.1.9.6.1.101.35.2.8.1.1 | DisplayString | read-write | The name of the row status field. This name may not necessarily be any name which is present in the MIBs loaded into the MLNMS station. |
| INT rndSimulatedVariableEntryIndex | 1.3.6.1.4.1.9.6.1.101.35.2.9.1.1.1 | INTEGER | read-only | The index entry. |
| ROW rndSimulatedVariableEntryStatus | 1.3.6.1.4.1.9.6.1.101.35.2.9.1.1.4 | RowStatus | read-write | It is used to delete an entry from this table. |
| OID rndSimulatedVariableObjectId | 1.3.6.1.4.1.9.6.1.101.35.2.9.1.1.2 | OBJECT IDENTIFIER | read-write | The object id of the simulated variable. If the simulated variable belongs to a table entry, the entire entry is henceforth supported. |
| rndSimulatedVariablesEntry | 1.3.6.1.4.1.9.6.1.101.35.2.9.1.1 | not-accessible | The row definition for the rndSimulatedVariablesTable table. | |
| rndSimulatedVariablesTable | 1.3.6.1.4.1.9.6.1.101.35.2.9.1 | not-accessible | This table indicates which MIB variables are simulated. | |
| INT rndSimulateUndo | 1.3.6.1.4.1.9.6.1.101.35.2.9.4 | INTEGER | read-write | This variable enables the authorized user to test the SNMP UNDO feature. |
| INT rndSnmpTestPassword | 1.3.6.1.4.1.9.6.1.101.35.2.9.2 | INTEGER | read-write | This variable enables the user supplying the correct code to use the SNMP test feature. |
| INT rndSnmpTests | 1.3.6.1.4.1.9.6.1.101.35.2.9.3 | INTEGER | read-write | This variable enables the authorized user to test various SNMP features. |
| STR rsEraseNvramAfterReset | 1.3.6.1.4.1.9.6.1.101.35.6.1 | DisplayString | read-write | The name of NVRAM application that will be erased after reset or ALL if all NVRAM should be erased. |
| rsNvram | 1.3.6.1.4.1.9.6.1.101.35.6 | |||
| rsNvramApplEntry | 1.3.6.1.4.1.9.6.1.101.35.6.2.1 | not-accessible | The status of NVRAM application table. | |
| INT rsNvramApplIndex | 1.3.6.1.4.1.9.6.1.101.35.6.2.1.1 | INTEGER | read-only | The index of NVRAM application table. |
| STR rsNvramApplName | 1.3.6.1.4.1.9.6.1.101.35.6.2.1.2 | DisplayString | read-only | The name of application used NVRAM. |
| rsNvramApplTable | 1.3.6.1.4.1.9.6.1.101.35.6.2 | not-accessible | The NVRAM application table. | |
| IP rsPingAddress | 1.3.6.1.4.1.9.6.1.101.35.4.1.1.1 | IpAddress | read-write | The address of the device to be pinged. Once an instance of this object is created, its value can not be changed. |
| INT rsPingAvgReturnTime | 1.3.6.1.4.1.9.6.1.101.35.4.1.1.10 | INTEGER | read-only | The average round trip time of all the packets that have been sent in this sequence.The value returned to a GET request is meaningless if no ping response in a sequence has been received yet. |
| PIN rsPingCompletionStatus | 1.3.6.1.4.1.9.6.1.101.35.4.1.1.12 | PingCompletionStatus | read-only | If all the echo request packets in this sequence have been responded by valid echo responses, this object is set to ok. Otherwise this status indicates the problem. bad-reply-data indicates that the reply data is not equal to the response data. |
| INT rsPingDelay | 1.3.6.1.4.1.9.6.1.101.35.4.1.1.5 | INTEGER | read-write | Specifies the minimum amount of time to wait before sending the next packet in a sequence after receiving a response. The actual delay may be greater due to internal task scheduling. |
| rsPingEntry | 1.3.6.1.4.1.9.6.1.101.35.4.1.1 | not-accessible | A ping request entry. A management station wishing to create an entry should first generate a pseudo-random serial number to be used as the index to this sparse table. It must also create in the same PDU the associated instance of the address object. It should also modify in the same PDU the default values for the other configuration objects if the defaults are not appropriate. Once the sequence completes, the management station should retrieve the values of the status objects of interest, and should then delete the entry. In order to prevent old entries from clogging the table, entries will be aged out, but an entry will never be deleted within 5 minutes of completing. | |
| ROW rsPingEntryStatus | 1.3.6.1.4.1.9.6.1.101.35.4.1.1.14 | RowStatus | read-write | The status of this table entry. |
| IP rsPingInetAddress | 1.3.6.1.4.1.9.6.1.101.35.4.2.1.2 | InetAddress | read-write | The address of the device to be pinged. Once an instance of this object is created, its value can not be changed. |
| IPt rsPingInetAddressType | 1.3.6.1.4.1.9.6.1.101.35.4.2.1.1 | InetAddressType | read-write | The address type of the device to be pinged. Once an instance of this object is created, its value can not be changed. |
| INT rsPingInetAvgReturnTime | 1.3.6.1.4.1.9.6.1.101.35.4.2.1.11 | INTEGER | read-only | The average round trip time (in milliseconds) of all the packets that have been sent in this sequence.The value returned to a GET request is meaningless if no ping response in a sequence has been received yet. |
| PIN rsPingInetCompletionStatus | 1.3.6.1.4.1.9.6.1.101.35.4.2.1.13 | PingCompletionStatus | read-only | If all the echo request packets in this sequence have been responded by valid echo responses, this object is set to ok. Otherwise this status indicates the problem. bad-reply-data indicates that the reply data is not equal to the response data. |
| INT rsPingInetDelay | 1.3.6.1.4.1.9.6.1.101.35.4.2.1.6 | INTEGER | read-write | Specifies the minimum amount of time (in milliseconds) to wait before sending the next packet in a sequence after receiving a response. The actual delay may be greater due to internal task scheduling. |
| rsPingInetEntry | 1.3.6.1.4.1.9.6.1.101.35.4.2.1 | not-accessible | A ping request entry. A management station wishing to create an entry should first generate a pseudo-random serial number to be used as the index to this sparse table. It must also create in the same PDU the associated instance of the address object. It should also modify in the same PDU the default values for the other configuration objects if the defaults are not appropriate. Once the sequence completes, the management station should retrieve the values of the status objects of interest, and should then delete the entry. In order to prevent old entries from clogging the table, entries will be aged out, but an entry will never be deleted within 5 minutes of completing. | |
| ROW rsPingInetEntryStatus | 1.3.6.1.4.1.9.6.1.101.35.4.2.1.15 | RowStatus | read-write | The status of this table entry. |
| INT rsPingInetMaxReturnTime | 1.3.6.1.4.1.9.6.1.101.35.4.2.1.12 | INTEGER | read-only | The maximum round trip time (in milliseconds) of all the packets that have been sent in this sequence.The value returned to a GET request is meaningless if no ping response in a sequence has been received yet. |
| INT rsPingInetMinReturnTime | 1.3.6.1.4.1.9.6.1.101.35.4.2.1.10 | INTEGER | read-only | The minimum round trip time (in milliseconds) of all the packets that have been sent in this sequence. The value returned to a GET request is meaningless if no ping response in a sequence has been received yet. |
| INT rsPingInetPacketCount | 1.3.6.1.4.1.9.6.1.101.35.4.2.1.3 | INTEGER | read-write | Specifies the number of ping packets to send to the target in this sequence. |
| INT rsPingInetPacketSize | 1.3.6.1.4.1.9.6.1.101.35.4.2.1.4 | INTEGER | read-write | Specifies the size of ping packets to send to the target in this sequence. The lower and upper boundaries of this object are implementation dependent. |
| INT rsPingInetPacketTimeout | 1.3.6.1.4.1.9.6.1.101.35.4.2.1.5 | INTEGER | read-write | Specifies the amount of time (in milliseconds) to wait for a response to a transmitted packet before declaring the packet 'dropped.' |
| C32 rsPingInetReceivedPackets | 1.3.6.1.4.1.9.6.1.101.35.4.2.1.9 | Counter32 | read-only | The number of ping packets that have been received from the target in this sequence. |
| C32 rsPingInetSentPackets | 1.3.6.1.4.1.9.6.1.101.35.4.2.1.8 | Counter32 | read-only | The number of ping packets that have been sent to the target in this sequence. |
| IP rsPingInetSourceAddr | 1.3.6.1.4.1.9.6.1.101.35.4.2.1.16 | InetAddress | read-write | The status of this table entry. |
| rsPingInetTable | 1.3.6.1.4.1.9.6.1.101.35.4.2 | not-accessible | A table of ping request entries. | |
| STR rsPingInetTimeStamp | 1.3.6.1.4.1.9.6.1.101.35.4.2.1.14 | DisplayString | read-only | The time-stamp indicating the time and date of creation or last update of this request. The format of the time-stamp is dd/mm/yyyy hh:mm:ss |
| T/F rsPingInetTrapOnCompletion | 1.3.6.1.4.1.9.6.1.101.35.4.2.1.7 | TruthValue | read-write | Specifies whether or not a rsPingCompletion trap should be issued on completion of the sequence of pings. If such a trap is desired, the NMS should ensure that the community table contains an instance specified by the NMSs IP address with rndCommunityTrapsEnable = trapsEnable. |
| INT rsPingMaxReturnTime | 1.3.6.1.4.1.9.6.1.101.35.4.1.1.11 | INTEGER | read-only | The maximum round trip time of all the packets that have been sent in this sequence.The value returned to a GET request is meaningless if no ping response in a sequence has been received yet. |
| rsPingMIB | 1.3.6.1.4.1.9.6.1.101.35.4 | |||
| INT rsPingMinReturnTime | 1.3.6.1.4.1.9.6.1.101.35.4.1.1.9 | INTEGER | read-only | The minimum round trip time of all the packets that have been sent in this sequence. The value returned to a GET request is meaningless if no ping response in a sequence has been received yet. |
| INT rsPingPacketCount | 1.3.6.1.4.1.9.6.1.101.35.4.1.1.2 | INTEGER | read-write | Specifies the number of ping packets to send to the target in this sequence. |
| INT rsPingPacketSize | 1.3.6.1.4.1.9.6.1.101.35.4.1.1.3 | INTEGER | read-write | Specifies the size of ping packets to send to the target in this sequence. The lower and upper boundaries of this object are implementation dependent. |
| INT rsPingPacketTimeout | 1.3.6.1.4.1.9.6.1.101.35.4.1.1.4 | INTEGER | read-write | Specifies the amount of time to wait for a response to a transmitted packet before declaring the packet 'dropped.' |
| C32 rsPingReceivedPackets | 1.3.6.1.4.1.9.6.1.101.35.4.1.1.8 | Counter32 | read-only | The number of ping packets that have been received from the target in this sequence. |
| C32 rsPingSentPackets | 1.3.6.1.4.1.9.6.1.101.35.4.1.1.7 | Counter32 | read-only | The number of ping packets that have been sent to the target in this sequence. |
| rsPingTable | 1.3.6.1.4.1.9.6.1.101.35.4.1 | not-accessible | A table of ping request entries. | |
| STR rsPingTimeStamp | 1.3.6.1.4.1.9.6.1.101.35.4.1.1.13 | DisplayString | read-only | The time-stamp indicating the time and date of creation or last update of this request. The format of the time-stamp is dd/mm/yyyy hh:mm:ss |
| T/F rsPingTrapOnCompletion | 1.3.6.1.4.1.9.6.1.101.35.4.1.1.6 | TruthValue | read-write | Specifies whether or not a rsPingCompletion trap should be issued on completion of the sequence of pings. If such a trap is desired, the NMS should ensure that the community table contains an instance specified by the NMSs IP address with rndCommunityTrapsEnable = trapsEnable. |
| rsPowerSupplyRedundacy | 1.3.6.1.4.1.9.6.1.101.35.5 | |||
| rsPowerSupplyRedundacyEntry | 1.3.6.1.4.1.9.6.1.101.35.5.1.1 | not-accessible | The status of power supply redundancy for this table. | |
| INT rsPowerSupplyRedundacyReNumber | 1.3.6.1.4.1.9.6.1.101.35.5.1.1.1 | INTEGER | read-only | This number identifies the module backed up by power supply redundancy in the stack. |
| INT rsPowerSupplyRedundacyStatus | 1.3.6.1.4.1.9.6.1.101.35.5.1.1.2 | INTEGER | read-only | The status of a power supply redundancy of the entry. |
| rsPowerSupplyRedundacyTable | 1.3.6.1.4.1.9.6.1.101.35.5.1 | not-accessible | The power supply redundancy table. | |
| snmpTesting | 1.3.6.1.4.1.9.6.1.101.35.2.9 |
RFC description
Application management for Cisco Small Business switches, including mid-level management and alarm configuration.
Start monitoring Cisco Small Business switch (Cisco SB series) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.