CISCOSB-rndApplications :: rndMonitoredObjectName

MIB Reference — IPNetwork Monitor · Updated September 14, 2026

All MIBsCISCOSB-rndApplicationsrndMonitoredObjectName

rndMonitoredObjectName

Module: CISCOSB-rndApplications

OID (symbolic): CISCOSB-rndApplications::rndMonitoredObjectName

OID (numeric): 1.3.6.1.4.1.9.6.1.101.35.2.4.1.3

Node type: OBJECT-TYPE

Type: DisplayString

Access: read-write

Description: The symbolic object type name of the object to which the monitored object instance belongs (as it appears the MIB module definition). In case of ambiguity the : format should be used. An instance of rndMonitoredObjectName need not be assigned any value, if the corresponding instance of rndMonitoredObjectIdentifier is assigned a value, since any one of these, together with the object instance identifier, suffices to unambigously identify the monitored object instance.

What is rndMonitoredObjectName?

This read-write DisplayString (0 to 20 characters) names the MIB object type being monitored, as it appears in its defining MIB module, optionally qualified as <module>:<object> to avoid ambiguity between MIBs that reuse names. An admin fills this in (or leaves it blank if rndMonitoredObjectIdentifier is set instead) to specify exactly which SNMP variable the Mid-Level station should poll. For example, setting rndMonitoredObjectName to "IF-MIB:ifInErrors" tells the station to poll that specific error counter.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.9.6.1.101.35.2.4.1.3
snmpwalk -v2c -c public <target> CISCOSB-rndApplications::rndMonitoredObjectName

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.9.6.1.101.35.2.4.1.3.1
snmpget -v2c -c public <target> CISCOSB-rndApplications::rndMonitoredObjectName.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.9.6.1.101.35.2.4.1.3.1 s <value>

Start monitoring Cisco Small Business switch (Cisco SB series) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CISCOSB-rndApplications::rndMonitoredObjectName OID value, configure state conditions and alerts, and monitor any Cisco Small Business switch (Cisco SB series) from a single console.

OID Breakdown

Upper-level ancestors (11 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.9ciscoCAT2600-MIB
1.3.6.1.4.1.9.6otherEnterprisesCISCO-SMI
1.3.6.1.4.1.9.6.1ciscoSBCISCO-SMI
1.3.6.1.4.1.9.6.1.101switch001CISCOSB-MIB
1.3.6.1.4.1.9.6.1.101.35rndApplicationsCISCOSB-MIB
Numeric OIDNameModule
1.3.6.1.4.1.9.6.1.101.35.2rndMidLevelManagementCISCOSB-rndApplications
1.3.6.1.4.1.9.6.1.101.35.2.4rndMonitoringTableCISCOSB-rndApplications
1.3.6.1.4.1.9.6.1.101.35.2.4.1rndMonitoringEntryCISCOSB-rndApplications
1.3.6.1.4.1.9.6.1.101.35.2.4.1.3rndMonitoredObjectNameCISCOSB-rndApplications