CISCOSB-rndApplications :: rndDefaultPollingInterval

MIB Reference — IPNetwork Monitor · Updated September 14, 2026

All MIBsCISCOSB-rndApplicationsrndDefaultPollingInterval

rndDefaultPollingInterval

Module: CISCOSB-rndApplications

OID (symbolic): CISCOSB-rndApplications::rndDefaultPollingInterval

OID (numeric): 1.3.6.1.4.1.9.6.1.101.35.2.3.1.4

Node type: OBJECT-TYPE

Type: INTEGER

Access: read-write

Description: The default period of time between two consecutive pollings of the monitored element for the value of an object instance. If no other polling interval is specifically assigned to the monitored object instance, this one will be used

What is rndDefaultPollingInterval?

This read-write INTEGER sets the default time between successive polls of a monitored element's object instances when no more specific interval has been assigned to that instance. An admin adjusts this to trade off how quickly changes are detected against the polling load placed on the Mid-Level station and the network. For example, lowering rndDefaultPollingInterval from 300 to 60 seconds makes the station poll every monitored value four times as often by default.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.9.6.1.101.35.2.3.1.4
snmpwalk -v2c -c public <target> CISCOSB-rndApplications::rndDefaultPollingInterval

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.9.6.1.101.35.2.3.1.4.1
snmpget -v2c -c public <target> CISCOSB-rndApplications::rndDefaultPollingInterval.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.9.6.1.101.35.2.3.1.4.1 i <value>

Start monitoring Cisco Small Business switch (Cisco SB series) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CISCOSB-rndApplications::rndDefaultPollingInterval OID value, configure state conditions and alerts, and monitor any Cisco Small Business switch (Cisco SB series) from a single console.

OID Breakdown

Upper-level ancestors (11 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.9ciscoCAT2600-MIB
1.3.6.1.4.1.9.6otherEnterprisesCISCO-SMI
1.3.6.1.4.1.9.6.1ciscoSBCISCO-SMI
1.3.6.1.4.1.9.6.1.101switch001CISCOSB-MIB
1.3.6.1.4.1.9.6.1.101.35rndApplicationsCISCOSB-MIB
Numeric OIDNameModule
1.3.6.1.4.1.9.6.1.101.35.2rndMidLevelManagementCISCOSB-rndApplications
1.3.6.1.4.1.9.6.1.101.35.2.3rndMonitoredElementsTableCISCOSB-rndApplications
1.3.6.1.4.1.9.6.1.101.35.2.3.1rndMonitoredElementEntryCISCOSB-rndApplications
1.3.6.1.4.1.9.6.1.101.35.2.3.1.4rndDefaultPollingIntervalCISCOSB-rndApplications