All MIBs › ADIC-INTELLIGENT-STORAGE-MIB
Description: ADIC enterprise MIB for monitoring tape library systems — drive status, environmental sensors, component inventory, and library-class change traps
Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.
What Is ADIC-INTELLIGENT-STORAGE-MIB?
ADIC-INTELLIGENT-STORAGE-MIB is an ADIC (Advanced Digital Information Corporation, tape-library vendor, later Quantum) proprietary MIB (enterprise OID 3764) providing common product/component identification for ADIC storage products. Its objects cover MIB/SNMP-agent version, product name/display name/description/vendor/version/display version, library class, serial number, agent global status/timestamp/get-timeout/modifiers/refresh rate, and a component table (ID, type, display name, info, location, vendor, serial number). As a hardware-inventory/status MIB it lets an administrator confirm exact product/component identification and overall agent health across ADIC storage products. It is deployed on ADIC (Quantum) intelligent storage products. Engineers can download the ADIC-INTELLIGENT-STORAGE-MIB file directly to load it into their MIB browser.
IPNetwork Monitor allows you to monitor SNMP objects defined in ADIC-INTELLIGENT-STORAGE-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.
Supported Devices
- ADIC (Quantum) intelligent storage products
Monitoring Examples
An administrator checks agentGlobalStatus alongside componentTable to get an overview of overall health and identify which specific component is affected on an ADIC storage product.
What Can Be Monitored
- overall agent status
- component identification and inventory
This MIB depends on
Related MIBs
Imported Objects
From RFC-1212
| OBJECT-TYPE |
From RFC-1215
| TRAP-TYPE |
From RFC1155-SMI
| Counter | |
| IpAddress | |
| enterprises |
From RFC1213-MIB
| DisplayString |
OIDs
| OID symbolic | OID numeric | Type | Access | Description |
|---|---|---|---|---|
| adic | 1.3.6.1.4.1.3764 | |||
| INT agentGetTimeOut | 1.3.6.1.4.1.3764.1.1.20.4 | INTEGER | read-only | Suggested time out in milliseconds for how long an SNMP management application should wait while attempting to poll the SNMP agent. |
| ADI agentGlobalStatus | 1.3.6.1.4.1.3764.1.1.20.1 | AdicAgentStatus | read-only | Current overall status of the agent. |
| ADI agentLastGlobalStatus | 1.3.6.1.4.1.3764.1.1.20.2 | AdicAgentStatus | read-only | The status before the current status which induced an initiative to issue a global status change trap. |
| INT agentModifiers | 1.3.6.1.4.1.3764.1.1.20.5 | INTEGER | read-only | Agent functional modifiers, when set the modifier is active. ----------------------------------------------------- Bit 3 => Agent in debug mode. ----------------------------------------------------- All other bits are product specific. |
| INT agentRefreshRate | 1.3.6.1.4.1.3764.1.1.20.6 | INTEGER | read-only | Rate in seconds at which the agent cached data is being updated. |
| INT agentTimeStamp | 1.3.6.1.4.1.3764.1.1.20.3 | INTEGER | read-only | The last time that the agent values have been updated. Universal time in seconds since UTC 1/1/70. |
| NTF componentAdded | 1.3.6.1.4.1.3764.1.1.0.502 | The component indicated by the value of componentId has been added to the library. | ||
| INT componentControl | 1.3.6.1.4.1.3764.1.1.30.10.1.9 | INTEGER | read-write | This object is used to control the addressed connUnit. NOTE: 'Cold Start' and 'Warm Start' are as defined in MIB II and are not meant to be a factory reset. resetColdStart: the addressed unit performs a 'Cold Start' reset. resetWarmStart: the addressed unit performs a 'Warm Start' reset. offline: the addressed unit puts itself into an implementation dependant 'offline' state. online: the addressed unit puts itself into an implementation dependant 'online' state. |
| STR componentDisplayName | 1.3.6.1.4.1.3764.1.1.30.10.1.3 | DisplayString | read-only | Name of this component for display purposes. Different OEMs may have different display names for the same ADIC product. |
| componentEntry | 1.3.6.1.4.1.3764.1.1.30.10.1 | not-accessible | A component entry containing objects for a particular component. | |
| STR componentFirmwareVersion | 1.3.6.1.4.1.3764.1.1.30.10.1.11 | DisplayString | read-only | Firmware version (or level) for this component. |
| INT componentGeoAddrAisle | 1.3.6.1.4.1.3764.1.1.30.10.1.12 | INTEGER | read-only | The aisle number where this component is located. A negative value indicates that an aisle number is not applicable to this component. |
| INT componentGeoAddrBlade | 1.3.6.1.4.1.3764.1.1.30.10.1.16 | INTEGER | read-only | The blade number within the network chasis where this component is located. A negative value indicates that a blade number is not applicable to this component. |
| INT componentGeoAddrChassis | 1.3.6.1.4.1.3764.1.1.30.10.1.15 | INTEGER | read-only | The chassis number where this component is located. A negative value indicates that a chassis number is not applicable to this component. |
| INT componentGeoAddrFrame | 1.3.6.1.4.1.3764.1.1.30.10.1.13 | INTEGER | read-only | The frame number where this component is located. A negative value indicates that a frame number is not applicable to this component. |
| INT componentGeoAddrRack | 1.3.6.1.4.1.3764.1.1.30.10.1.14 | INTEGER | read-only | The rack number where this component is located. A negative value indicates that a rack number is not applicable to this component. |
| ADI componentId | 1.3.6.1.4.1.3764.1.1.30.10.1.1 | AdicGlobalId | read-only | The unique identification for this component among those within this proxy domain. |
| STR componentInfo | 1.3.6.1.4.1.3764.1.1.30.10.1.4 | DisplayString | read-write | A display string containing information about this component. |
| IP componentIpAddress | 1.3.6.1.4.1.3764.1.1.30.10.1.17 | IpAddress | read-only | IP address of this component. If the component has no IP address, this object returns 0.0.0.0. The address may refer to an internal network not accessible to an external management application. |
| STR componentLocation | 1.3.6.1.4.1.3764.1.1.30.10.1.5 | DisplayString | read-only | Location information for this component. |
| OID componentREDId | 1.3.6.1.4.1.3764.1.1.30.10.1.10 | AdicREDIdentifier | read-only | Runtime Error Detection identifier for this power supply. |
| NTF componentRemoved | 1.3.6.1.4.1.3764.1.1.0.503 | The component indicated by the value of componentId has been removed from the library. | ||
| components | 1.3.6.1.4.1.3764.1.1.30 | |||
| STR componentSn | 1.3.6.1.4.1.3764.1.1.30.10.1.7 | DisplayString | read-only | The serial number for this component. |
| INT componentStatus | 1.3.6.1.4.1.3764.1.1.30.10.1.8 | INTEGER | read-only | Overall status of the component. |
| componentTable | 1.3.6.1.4.1.3764.1.1.30.10 | not-accessible | General information about the system's components, including the unique identifiers. The structure this table is based on the Fibre Alliance MIB connUnitEntry. | |
| ADI componentType | 1.3.6.1.4.1.3764.1.1.30.10.1.2 | AdicComponentType | read-only | The type of this component. |
| STR componentVendor | 1.3.6.1.4.1.3764.1.1.30.10.1.6 | DisplayString | read-only | Name vendor of this component. |
| coolingFanEntry | 1.3.6.1.4.1.3764.1.1.200.200.40.1 | not-accessible | ** This entry object is optional ** Each entry contains the information for a specific cooling fan. | |
| INT coolingFanIndex | 1.3.6.1.4.1.3764.1.1.200.200.40.1.1 | INTEGER | read-only | ** This object is optional ** Index of this cooling fan within the component specified by componentId. |
| STR coolingFanLocation | 1.3.6.1.4.1.3764.1.1.200.200.40.1.9 | DisplayString | read-only | ** This object is optional ** Physical location of this fan. |
| STR coolingFanName | 1.3.6.1.4.1.3764.1.1.200.200.40.1.2 | DisplayString | read-only | ** This object is optional ** Display name of this coolingFan. |
| INT coolingFanNominalHi | 1.3.6.1.4.1.3764.1.1.200.200.40.1.6 | INTEGER | read-only | ** This object is optional ** Upper fan speed limit of the nominal state for this fan. Units are RPM. |
| INT coolingFanNominalLo | 1.3.6.1.4.1.3764.1.1.200.200.40.1.5 | INTEGER | read-only | ** This object is optional ** Lower fan speed limit of the nominal state for this fan. Units are RPM. |
| OID coolingFanREDId | 1.3.6.1.4.1.3764.1.1.200.200.40.1.10 | AdicREDIdentifier | read-only | ** This object is optional ** Runtime Error Detection identifier for this fan. |
| INT coolingFanRPM | 1.3.6.1.4.1.3764.1.1.200.200.40.1.4 | INTEGER | read-only | ** This object is optional ** The fan speed in revolutions per minute. |
| ADI coolingFanStatus | 1.3.6.1.4.1.3764.1.1.200.200.40.1.3 | AdicSensorStatus | read-only | ** This object is optional ** Is the fan speed in the nominal, warning or alarm region? |
| coolingFanTable | 1.3.6.1.4.1.3764.1.1.200.200.40 | not-accessible | ** This table is optional ** Table of cooling fans in the library. | |
| INT coolingFanWarningHi | 1.3.6.1.4.1.3764.1.1.200.200.40.1.8 | INTEGER | read-only | ** This object is optional ** Upper fan speed limit of the warning state for this fan. Units are RPM. If the speed rises above this limit, the fan enters the alarmHigh state. |
| INT coolingFanWarningLo | 1.3.6.1.4.1.3764.1.1.200.200.40.1.7 | INTEGER | read-only | ** This object is optional ** Lower fan speed limit of the warning state for this fan. Units are RPM. If the speed falls below this limit, the fan enters the alarmLow state. |
| globalData | 1.3.6.1.4.1.3764.1.1.20 | |||
| hardware | 1.3.6.1.4.1.3764.1.1.200 | |||
| intelligent | 1.3.6.1.4.1.3764.1.1 | |||
| network | 1.3.6.1.4.1.3764.1.1.400 | |||
| notification | 1.3.6.1.4.1.3764.1.1.500 | |||
| powerAndCooling | 1.3.6.1.4.1.3764.1.1.200.200 | |||
| powerSupplyEntry | 1.3.6.1.4.1.3764.1.1.200.200.10.1 | not-accessible | ** This entry object is optional ** Each entry contains the information for a specific power supply. | |
| INT powerSupplyIndex | 1.3.6.1.4.1.3764.1.1.200.200.10.1.1 | INTEGER | read-only | ** This object is optional ** Index of this power supply within the component specified by componentId. |
| STR powerSupplyLocation | 1.3.6.1.4.1.3764.1.1.200.200.10.1.7 | DisplayString | read-only | ** This object is optional ** Physical location of this power supply. |
| STR powerSupplyName | 1.3.6.1.4.1.3764.1.1.200.200.10.1.2 | DisplayString | read-only | ** This object is optional ** Display name of this power supply. |
| INT powerSupplyRatedVoltage | 1.3.6.1.4.1.3764.1.1.200.200.10.1.6 | INTEGER | read-only | ** This object is optional ** Rated output voltage in millivolts of this power supply. |
| OID powerSupplyREDId | 1.3.6.1.4.1.3764.1.1.200.200.10.1.5 | AdicREDIdentifier | read-only | ** This object is optional ** Runtime Error Detection identifier for this power supply. |
| powerSupplyTable | 1.3.6.1.4.1.3764.1.1.200.200.10 | not-accessible | ** This table is optional ** Table of the power supplies. | |
| ADI powerSupplyType | 1.3.6.1.4.1.3764.1.1.200.200.10.1.4 | AdicVoltageType | read-only | ** This object is optional ** DC or AC power supply? |
| INT powerSupplyWattage | 1.3.6.1.4.1.3764.1.1.200.200.10.1.3 | INTEGER | read-only | ** This object is optional ** What is maximum power output of this power supply. Units are Watts. |
| productAgentInfo | 1.3.6.1.4.1.3764.1.1.10 | |||
| STR productDescription | 1.3.6.1.4.1.3764.1.1.10.5 | DisplayString | read-only | A short description of this SNMP agent. |
| STR productDisplayName | 1.3.6.1.4.1.3764.1.1.10.4 | DisplayString | read-only | Name of this agent for display purposes. May be customized for OEM. |
| STR productDisplayVersion | 1.3.6.1.4.1.3764.1.1.10.8 | DisplayString | read-only | The version identifier according to the vendor or OEM. |
| INT productLibraryClass | 1.3.6.1.4.1.3764.1.1.10.9 | INTEGER | read-only | Basic library includes minimal connectivity hardware. Intelligent library includes SAN appliances and value-added features. |
| NTF productLibraryClassChange | 1.3.6.1.4.1.3764.1.1.0.504 | The product library class has changed. This occurs when connectivity hardware is added or removed. The payload contains the productLibraryClass before and after the change. | ||
| ADI productMibVersion | 1.3.6.1.4.1.3764.1.1.10.1 | AdicMibVersion | read-only | MIB version identifier. |
| STR productName | 1.3.6.1.4.1.3764.1.1.10.3 | DisplayString | read-only | Name of ADIC branded product. Uniquely identifies the product, independent of OEM. |
| STR productSerialNumber | 1.3.6.1.4.1.3764.1.1.10.10 | DisplayString | read-only | The serial number of the entire library. |
| STR productSnmpAgentVersion | 1.3.6.1.4.1.3764.1.1.10.2 | DisplayString | read-only | SNMP agent version identifier. |
| STR productVendor | 1.3.6.1.4.1.3764.1.1.10.6 | DisplayString | read-only | Name of the product vendor or OEM. |
| STR productVersion | 1.3.6.1.4.1.3764.1.1.10.7 | DisplayString | read-only | String Format: MNNO.TVBBBPP Examples 1. 091a.TR054 Version 0.91, build 54 of the RCS test code for ADIC 2. 100A.GM052 Version 1.00, build 52 of the MCB GA candidate code for ADIC M Major version number NN Minor version number O OEM (Uppercase when release candidate, otherwise lowercase) A/a - ADIC Others - Reserved) T Target G - GA Candidate Release (labeled build that is a release candidate) T - Test build (labeled build used for formal testing) D - Dev build (labeled build used for unit testing) (lower case) - specifies developer of a local build V Variant S - System R - RCS M - MCB BBB Build number (3 digit sequential number specifying exact build) PP Patch Number (Optional alphanumeric characters denoting patch level of this build if necessary) |
| NTF shutdownSequenceInitiated | 1.3.6.1.4.1.3764.1.1.0.501 | The component indicated by the value of componentId has initiated its shutdown sequence. | ||
| sml | 1.3.6.1.4.1.3764.1.1.300 | |||
| software | 1.3.6.1.4.1.3764.1.1.100 | |||
| NTF startupSequenceComplete | 1.3.6.1.4.1.3764.1.1.0.500 | The component indicated by the value of componentId has successfully completed its startup sequence. | ||
| storage | 1.3.6.1.4.1.3764.1 | |||
| INT temperatureSensorDegreesCelsius | 1.3.6.1.4.1.3764.1.1.200.200.30.1.4 | INTEGER | read-only | ** This object is optional ** The temperature in degrees Celsuis for this temperature sensor. |
| temperatureSensorEntry | 1.3.6.1.4.1.3764.1.1.200.200.30.1 | not-accessible | ** This entry object is optional ** Each entry contains the information for a specific sensor. | |
| INT temperatureSensorIndex | 1.3.6.1.4.1.3764.1.1.200.200.30.1.1 | INTEGER | read-only | ** This object is optional ** Index of this temperatureSensor within the component specified by componentId. |
| STR temperatureSensorLocation | 1.3.6.1.4.1.3764.1.1.200.200.30.1.9 | DisplayString | read-only | ** This object is optional ** Physical location of this temperature sensor. |
| STR temperatureSensorName | 1.3.6.1.4.1.3764.1.1.200.200.30.1.2 | DisplayString | read-only | ** This object is optional ** Display name of this temperatureSensor. |
| INT temperatureSensorNominalHi | 1.3.6.1.4.1.3764.1.1.200.200.30.1.6 | INTEGER | read-only | ** This object is optional ** Upper temperature limit of the nominal state for this temperature sensor. Unit are degrees Celsius. |
| INT temperatureSensorNominalLo | 1.3.6.1.4.1.3764.1.1.200.200.30.1.5 | INTEGER | read-only | ** This object is optional ** Lower temperature limit of the nominal state for this temperature sensor. Unit are degrees Celsius. |
| OID temperatureSensorREDId | 1.3.6.1.4.1.3764.1.1.200.200.30.1.10 | AdicREDIdentifier | read-only | ** This object is optional ** Runtime Error Detection identifier for this temperature sensor. |
| ADI temperatureSensorStatus | 1.3.6.1.4.1.3764.1.1.200.200.30.1.3 | AdicSensorStatus | read-only | ** This object is optional ** What is the state of this temperatureSensor? Is the temperature in the nominal, warning or alarm region? |
| temperatureSensorTable | 1.3.6.1.4.1.3764.1.1.200.200.30 | not-accessible | ** This table is optional ** Table of the temperature sensors in each component. | |
| INT temperatureSensorWarningHi | 1.3.6.1.4.1.3764.1.1.200.200.30.1.8 | INTEGER | read-only | ** This object is optional ** Upper temperature limit of the warning state for this temperature sensor. Unit are degrees Celsius. If the temperature rises above this limit, the sensor enters the alarm state. |
| INT temperatureSensorWarningLo | 1.3.6.1.4.1.3764.1.1.200.200.30.1.7 | INTEGER | read-only | ** This object is optional ** Lower temperature limit of the warning state for this temperature sensor. Unit are degrees Celsius. If the temperature falls below this limit, the sensor enters the alarm state. |
| INT trapIntendedUsage | 1.3.6.1.4.1.3764.1.1.500.10.1.4 | INTEGER | read-only | The value of this qualifier aids the management application in determining how to respond to the trap. If the value is public(1), the information is intended to be propagated to external observers, such as sending email. If the value is triggerRefresh(2), the information is intended to update the management application's data model, but not necessarily propagated to external observers. |
| trapPayloadEntry | 1.3.6.1.4.1.3764.1.1.500.10.1 | not-accessible | Each entry contains the information for a specific cooling fan. | |
| trapPayloadTable | 1.3.6.1.4.1.3764.1.1.500.10 | not-accessible | Defines objects common to all trap payloads. | |
| INT trapSequenceNumber | 1.3.6.1.4.1.3764.1.1.500.10.1.1 | INTEGER | read-only | |
| INT trapSeverity | 1.3.6.1.4.1.3764.1.1.500.10.1.2 | INTEGER | read-only | |
| STR trapSummaryText | 1.3.6.1.4.1.3764.1.1.500.10.1.3 | DisplayString | read-only | |
| voltageSensorEntry | 1.3.6.1.4.1.3764.1.1.200.200.20.1 | not-accessible | ** This entry object is optional ** Each entry contains the information for a specific voltage sensor. | |
| INT voltageSensorIndex | 1.3.6.1.4.1.3764.1.1.200.200.20.1.1 | INTEGER | read-only | ** This object is optional ** Index of this voltage sensor within the component specified by componentId. |
| STR voltageSensorLocation | 1.3.6.1.4.1.3764.1.1.200.200.20.1.10 | DisplayString | read-only | ** This object is optional ** Physical location of the voltage sensor. |
| INT voltageSensorMillivolts | 1.3.6.1.4.1.3764.1.1.200.200.20.1.4 | INTEGER | read-only | ** This object is optional ** What is the voltage in millivolts of this voltage sensor? |
| STR voltageSensorName | 1.3.6.1.4.1.3764.1.1.200.200.20.1.2 | DisplayString | read-only | ** This object is optional ** Display name of this voltage sensor. |
| INT voltageSensorNominalHi | 1.3.6.1.4.1.3764.1.1.200.200.20.1.7 | INTEGER | read-only | ** This object is optional ** Upper voltage limit of the nominal state for this voltage sensor. Unit are millivolts. |
| INT voltageSensorNominalLo | 1.3.6.1.4.1.3764.1.1.200.200.20.1.6 | INTEGER | read-only | ** This object is optional ** Lower voltage limit of the nominal state for this voltage sensor. Unit are millivolts. |
| OID voltageSensorREDId | 1.3.6.1.4.1.3764.1.1.200.200.20.1.11 | AdicREDIdentifier | read-only | ** This object is optional ** Runtime Error Detection identifier for this voltage sensor. |
| ADI voltageSensorStatus | 1.3.6.1.4.1.3764.1.1.200.200.20.1.3 | AdicSensorStatus | read-only | ** This object is optional ** What is the state of this voltage sensor? Is the voltage in the nominal, warning or alarm region? |
| voltageSensorTable | 1.3.6.1.4.1.3764.1.1.200.200.20 | not-accessible | ** This table is optional ** Table of the voltage sensors. | |
| ADI voltageSensorType | 1.3.6.1.4.1.3764.1.1.200.200.20.1.5 | AdicVoltageType | read-only | ** This object is optional ** DC or AC voltage sensor? |
| INT voltageSensorWarningHi | 1.3.6.1.4.1.3764.1.1.200.200.20.1.9 | INTEGER | read-only | ** This object is optional ** Upper voltage limit of the warning state for this voltage sensor. Unit are millivolts. If the voltage rises above this limit, the sensor enters the alarm state. |
| INT voltageSensorWarningLo | 1.3.6.1.4.1.3764.1.1.200.200.20.1.8 | INTEGER | read-only | ** This object is optional ** Lower voltage limit of the warning state for this voltage sensor. Unit are millivolts. If the voltage falls below this limit, the sensor enters the alarm state. |
RFC description
Monitors intelligent storage systems including power supplies, cooling, and tape library components.
Start monitoring ADIC (Quantum) storage products with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.