ACC-ATMVP

All MIBs › ACC-ATMVP

Category: ATM, Vendor: ACC/Ericsson

Description: Manages ATM Virtual Path (VP) connection configuration on ACC/Ericsson devices, including VP endpoint and cross-connect management.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is ACC-ATMVP?

ACC-ATMVP is an ACC/Ericsson enterprise MIB for managing ATM Virtual Path (VP) connections on ACC access/switching devices, covering virtual port configuration and cross-connect-style endpoint management. It exposes per-virtual-port objects such as admin and operational state, signaling protocol, queue mode, congestion status, the underlying physical port, and traffic counters for 1483 bridged, CIP, and tunnel traffic. Its monitoring value lies in ATM virtual path health: an operator can confirm a virtual port is administratively and operationally up, check for congestion flags, and track per-traffic-type counters to spot an ATM VP that has gone down or is experiencing congestion-related loss. It builds on standard ATM Virtual Path/Virtual Channel concepts common to ATM equipment of its era. It is deployed on legacy ACC/Ericsson ATM access devices in older carrier or enterprise WAN environments. Engineers can download the ACC-ATMVP file directly to load it into their MIB browser.

IPNetwork Monitor allows you to monitor SNMP objects defined in ACC-ATMVP. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

ACC/Ericsson ATM access device

Monitoring Examples

An operator would poll accVpTable / accVpEntry to read oVirtualPortAdminState and oVirtualPortOperState for a given VP, confirming the virtual path is both configured up and actually passing traffic. Checking oVirtualPortCongestion alongside oVirtualPortCountCIP and oVirtualPortCountTunnel reveals whether a specific traffic type is contributing to congestion on that VP. An oVirtualPortOperState that drops to down while oVirtualPortAdminState remains up, combined with a congestion flag set, would indicate the underlying oVirtualPortPhysicalPort is overloaded or has failed.

What Can Be Monitored

virtual port admin/operational state
signaling protocol
queue mode
congestion status
1483 bridged traffic count
tunnel traffic count

Imported Objects

From ACC-MIB

DisplayString
IfIndex
RowStatus
SmdsAddress
accBRG	OBJECT-IDENTITY

From ACC-SYSTEM

accSysInfo	OBJECT-IDENTITY
accTrapLogSeqNum	OBJECT-TYPE

From RFC1155-SMI

Counter
OBJECT-TYPE

OIDs

OID symbolic	OID numeric	Type	Access	Description
accAtmVp	1.3.6.1.4.1.5.1.1.73
accAtmVp1483Grp	1.3.6.1.4.1.5.1.1.73.6
accAtmVpCipGrp	1.3.6.1.4.1.5.1.1.73.7
accAtmVpFrfGrp	1.3.6.1.4.1.5.1.1.73.4
accAtmVpPppGrp	1.3.6.1.4.1.5.1.1.73.5
accAtmVpScalarGrp	1.3.6.1.4.1.5.1.1.73.2
accAtmVpStatsGrp	1.3.6.1.4.1.5.1.1.73.3
accVpEntry	1.3.6.1.4.1.5.1.1.73.1.1		not-accessible	An entry in the virtual port table.
accVpStatEntry	1.3.6.1.4.1.5.1.1.73.3.1.1		not-accessible	An entry in the virtual port statistics table.
accVpStatTable	1.3.6.1.4.1.5.1.1.73.3.1		not-accessible	The virtual port statistics table.
accVpTable	1.3.6.1.4.1.5.1.1.73.1		not-accessible	The Virtual port table.
INT oVirtualPortAdminState	1.3.6.1.4.1.5.1.1.73.1.1.2	INTEGER	read-write	The Admin state of a virtual port.
INT oVirtualPortCongestion	1.3.6.1.4.1.5.1.1.73.1.1.6	INTEGER	read-only	The congestion percent.
INT oVirtualPortCount1483Br	1.3.6.1.4.1.5.1.1.73.2.1	INTEGER	read-write	The RFC1483 virtual port count.
INT oVirtualPortCountCIP	1.3.6.1.4.1.5.1.1.73.2.2	INTEGER	read-write	The CIP virtual port count.
INT oVirtualPortCountFrf	1.3.6.1.4.1.5.1.1.73.2.4	INTEGER	read-write	The FRF virtual port count.
INT oVirtualPortCountPpp	1.3.6.1.4.1.5.1.1.73.2.6	INTEGER	read-write	The PPP over ATM virtual port count.
INT oVirtualPortCountTunnel	1.3.6.1.4.1.5.1.1.73.2.3	INTEGER	read-write	The Tunnel virtual port count.
INT oVirtualPortCountVFR	1.3.6.1.4.1.5.1.1.73.2.7	INTEGER	read-write	The Virtual Frame Relay virtual port count.
INT oVirtualPortCountXOT	1.3.6.1.4.1.5.1.1.73.2.8	INTEGER	read-write	The XOT virtual port count.
IFI oVirtualPortName	1.3.6.1.4.1.5.1.1.73.1.1.1	IfIndex	read-only	IfIndex for virtual port.
INT oVirtualPortOperState	1.3.6.1.4.1.5.1.1.73.1.1.3	INTEGER	read-only	The operational state of a virtual port.
INT oVirtualPortPhysicalPort	1.3.6.1.4.1.5.1.1.73.1.1.7	INTEGER	read-only	The physical port associated with a virtual port.
INT oVirtualPortProtocol	1.3.6.1.4.1.5.1.1.73.1.1.4	INTEGER	read-only	The protocol used over a virtual port.
INT oVirtualPortQueueMode	1.3.6.1.4.1.5.1.1.73.1.1.5	INTEGER	read-only	Queuing mode used. Currently only EXPRESS queueing.
INT oVpAtm1483CongTimeOut	1.3.6.1.4.1.5.1.1.73.6.1.1.6	INTEGER	read-write	The amount of time to wait for the congestion to clear out before declaring the circuit to be down
INT oVpAtm1483MuxType	1.3.6.1.4.1.5.1.1.73.6.1.1.7	INTEGER	read-write	The multiplexing that needs to be done over this port
IFI oVpAtm1483Name	1.3.6.1.4.1.5.1.1.73.6.1.1.1	IfIndex	read-only	The internal name for this port
INT oVpAtm1483RetryCount	1.3.6.1.4.1.5.1.1.73.6.1.1.3	INTEGER	read-write	The number of time to retry for the connection if it not up
INT oVpAtm1483RetryTimer	1.3.6.1.4.1.5.1.1.73.6.1.1.2	INTEGER	read-write	The amount of time to wait before retrying the connection
INT oVpAtm1483Vci	1.3.6.1.4.1.5.1.1.73.6.1.1.5	INTEGER	read-write	The VCI for the circuit that needs to be created over this port
INT oVpAtm1483Vpi	1.3.6.1.4.1.5.1.1.73.6.1.1.4	INTEGER	read-write	The VPI for the circuit that needs to be created over this port
INT oVpAtmCipAddrType	1.3.6.1.4.1.5.1.1.73.7.1.1.6	INTEGER	read-write	The type of address supported ovwer this port
INT oVpAtmCipAging	1.3.6.1.4.1.5.1.1.73.7.1.1.5	INTEGER	read-write	The time that needs to elapse in seconds before aging this circuit
STR oVpAtmCipLocalAddress	1.3.6.1.4.1.5.1.1.73.7.1.1.7	DisplayString	read-write	The local address for this port that is used in identifying this instance on the atm network
INT oVpAtmCipMode	1.3.6.1.4.1.5.1.1.73.7.1.1.4	INTEGER	read-write	The operation mode for this CIP port
INT oVpAtmCipMtu	1.3.6.1.4.1.5.1.1.73.7.1.1.10	INTEGER	read-write	The MTU for this port
IFI oVpAtmCipName	1.3.6.1.4.1.5.1.1.73.7.1.1.1	IfIndex	read-only	The internal name for this port
INT oVpAtmCipPcr	1.3.6.1.4.1.5.1.1.73.7.1.1.11	INTEGER	read-write	The PCR to be used for the circuts over this port
INT oVpAtmCipRetryCount	1.3.6.1.4.1.5.1.1.73.7.1.1.3	INTEGER	read-write	The number of time to retry for the connection if it not up
INT oVpAtmCipRetryTimer	1.3.6.1.4.1.5.1.1.73.7.1.1.2	INTEGER	read-write	The amount of time to wait before retrying the connection
STR oVpAtmCipServerAddress	1.3.6.1.4.1.5.1.1.73.7.1.1.8	DisplayString	read-write	The address at which the server is reachable
INT oVpAtmCipServerVccType	1.3.6.1.4.1.5.1.1.73.7.1.1.9	INTEGER	read-write	The curcuit types the server will be able to accept
INT oVpAtmFrfAddrLength	1.3.6.1.4.1.5.1.1.73.4.1.1.5	INTEGER	read-write	The Frame Relay address length for this port
INT oVpAtmFrfCellLossPrioIn	1.3.6.1.4.1.5.1.1.73.4.1.1.11	INTEGER	read-write	The CLP for incoming cells
INT oVpAtmFrfCellLossPrioOut	1.3.6.1.4.1.5.1.1.73.4.1.1.12	INTEGER	read-write	The CLP for outgoing cells
INT oVpAtmFrfClpMode	1.3.6.1.4.1.5.1.1.73.4.1.1.13	INTEGER	read-write	The CLP mode for mapping from the DE bit
INT oVpAtmFrfCongTimeOut	1.3.6.1.4.1.5.1.1.73.4.1.1.10	INTEGER	read-write	The amount of time that needs to elapse in seconds before declaring that the circuit is down due to congestion
INT oVpAtmFrfDlciLimit	1.3.6.1.4.1.5.1.1.73.4.1.1.4	INTEGER	read-write	The number of DLCI that can be active on this port
IFI oVpAtmFrfName	1.3.6.1.4.1.5.1.1.73.4.1.1.1	IfIndex	read-only	The internal name for this port
INT oVpAtmFrfPvcDlciEnd	1.3.6.1.4.1.5.1.1.73.4.1.1.7	INTEGER	read-write	The ending DLCI number for this port
INT oVpAtmFrfPvcDlciStart	1.3.6.1.4.1.5.1.1.73.4.1.1.6	INTEGER	read-write	The starting DLCI number for this port
INT oVpAtmFrfPvcVci	1.3.6.1.4.1.5.1.1.73.4.1.1.9	INTEGER	read-write	The VCI for the circuit that needs to be created overt his port
INT oVpAtmFrfPvcVpi	1.3.6.1.4.1.5.1.1.73.4.1.1.8	INTEGER	read-write	The VPI for the circuit that needs to be created over this port
INT oVpAtmFrfRetryCount	1.3.6.1.4.1.5.1.1.73.4.1.1.3	INTEGER	read-write	The number of times to retry the connection before declaring that the circuit is down
INT oVpAtmFrfRetryTimer	1.3.6.1.4.1.5.1.1.73.4.1.1.2	INTEGER	read-write	The amount of time before retrying to reconnect the circuit
INT oVpAtmPppCongTimeOut	1.3.6.1.4.1.5.1.1.73.5.1.1.6	INTEGER	read-write	The amount of time to wait for the congestion to clear out before declaring the circuit to be down
INT oVpAtmPppMuxType	1.3.6.1.4.1.5.1.1.73.5.1.1.7	INTEGER	read-write	The multiplexing that needs to be done over this port
IFI oVpAtmPppName	1.3.6.1.4.1.5.1.1.73.5.1.1.1	IfIndex	read-only	The internal name for this port
INT oVpAtmPppRetryCount	1.3.6.1.4.1.5.1.1.73.5.1.1.3	INTEGER	read-write	The number of time to retry for the connection if it not up
INT oVpAtmPppRetryTimer	1.3.6.1.4.1.5.1.1.73.5.1.1.2	INTEGER	read-write	The amount of time to wait before retrying the connection
INT oVpAtmPppVci	1.3.6.1.4.1.5.1.1.73.5.1.1.5	INTEGER	read-write	The VCI for the circuit that needs to be created over this port
INT oVpAtmPppVpi	1.3.6.1.4.1.5.1.1.73.5.1.1.4	INTEGER	read-write	The VPI for the circuit that needs to be created over this port
CTR oVpStatInDiscards	1.3.6.1.4.1.5.1.1.73.3.1.1.6	Counter	read-only	Number of receive discards.
CTR oVpStatInErrs	1.3.6.1.4.1.5.1.1.73.3.1.1.9	Counter	read-only	Number of received packets in error.
CTR oVpStatInOctets	1.3.6.1.4.1.5.1.1.73.3.1.1.4	Counter	read-only	Octets received.
CTR oVpStatInPackets	1.3.6.1.4.1.5.1.1.73.3.1.1.2	Counter	read-only	Received packets.
IFI oVpStatName	1.3.6.1.4.1.5.1.1.73.3.1.1.1	IfIndex	read-only	ifIndex of the Virtual port.
CTR oVpStatNumChangeds	1.3.6.1.4.1.5.1.1.73.3.1.1.8	Counter	read-only	Number of changes.
CTR oVpStatOutDiscards	1.3.6.1.4.1.5.1.1.73.3.1.1.7	Counter	read-only	Number of transmit discards.
CTR oVpStatOutErrs	1.3.6.1.4.1.5.1.1.73.3.1.1.10	Counter	read-only	Number of packets attempted to transmit that were in error.
CTR oVpStatOutOctets	1.3.6.1.4.1.5.1.1.73.3.1.1.5	Counter	read-only	Octets sent out.
CTR oVpStatOutPackets	1.3.6.1.4.1.5.1.1.73.3.1.1.3	Counter	read-only	Packets sent out.
vpAtm1483Entry	1.3.6.1.4.1.5.1.1.73.6.1.1		not-accessible	An entry in the RFC1483 configuration table.
vpAtm1483Table	1.3.6.1.4.1.5.1.1.73.6.1		not-accessible	The RFC1483 configuration table.
vpAtmCipEntry	1.3.6.1.4.1.5.1.1.73.7.1.1		not-accessible	An entry in the CIP table.
vpAtmCipTable	1.3.6.1.4.1.5.1.1.73.7.1		not-accessible	The Classical IP over ATM configuration table.
vpAtmFrfEntry	1.3.6.1.4.1.5.1.1.73.4.1.1		not-accessible	An entry in the FRF table.
vpAtmFrfTable	1.3.6.1.4.1.5.1.1.73.4.1		not-accessible	The FRF (Frame relay network interworking over ATM) table.
vpAtmPppEntry	1.3.6.1.4.1.5.1.1.73.5.1.1		not-accessible	An entry in the PPP over ATM configuration table.
vpAtmPppTable	1.3.6.1.4.1.5.1.1.73.5.1		not-accessible	The PPP over ATM configuration table.

RFC description

Manages ATM virtual port configuration, status, protocol support, and queue management on Ascend access devices.

Start monitoring ACC/Ericsson WAN access routers (legacy) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download ACC-ATMVP

What Is ACC-ATMVP?

Supported Devices

Monitoring Examples

What Can Be Monitored

This MIB depends on

Related MIBs

RFC description