30 modules in MPLS and Traffic Engineering
| Module | Description |
|---|---|
| A3COM-HUAWEI-MPLS-LDP-MIB | Manages the MPLS Label Distribution Protocol (LDP) on H3C/3Com devices, including LDP session state, label bindings, and FEC-to-label mappings. |
| A3COM-HUAWEI-MPLS-LSR-MIB | Manages MPLS Label Switching Router (LSR) functions on H3C/3Com equipment, providing cross-connect table and label operation management. |
| ALCATEL-IND1-TIMETRA-LDP-MIB | Alcatel 7750 SR service router LDP MIB for managing MPLS Label Distribution Protocol sessions and label bindings. |
| ALCATEL-IND1-TIMETRA-MPLS-MIB | Alcatel 7750 SR service router MPLS MIB for managing LSPs, RSVP-TE tunnels, and MPLS forwarding tables. |
| ALCATEL-IND1-TIMETRA-OAM-TEST-MIB | Alcatel 7750 SR service router OAM test MIB for managing LSP ping/trace, VCCV, and service connectivity tests. |
| ALCATEL-IND1-TIMETRA-SDP-MIB | Alcatel 7750 SR service router SDP MIB for managing service distribution paths and tunnel bindings for VPN services. |
| ALCATEL-IND1-TIMETRA-SERV-MIB | Alcatel 7750 SR service router MIB covering services, used to configure VPLS, VPWS, and IES service instances. |
| BIANCA-BRICK-L2TP-MIB | Monitors L2TP tunnel sessions and configuration on bintec elmeg BIANCA/BRICK broadband routers. |
| BIANCA-BRICK-PPTP-MIB | Monitors and configures PPTP VPN tunnel sessions on bintec elmeg BIANCA/BRICK routers. |
| CIENA-CES-MPLS-MIB | Manages MPLS label switched paths and forwarding tables on Ciena CES Carrier Ethernet switches. |
| FRAME-RELAY-DTE-MIB IPNM ✓ | Covers managed objects for Frame Relay Data Terminal Equipment (DTE) interfaces, including DLCI status and error statistics. |
| HH3C-MPLS-LDP-MIB | Manages Label Distribution Protocol (LDP) sessions, label bindings, and FEC mappings on H3C MPLS routers. |
| HH3C-MPLS-LSR-MIB | Manages MPLS Label Switching Router (LSR) label forwarding entries and interface parameters on H3C devices. |
| HP-SN-MPLS-TC-MIB | SNMP MIB from HP ServerNet (with Foundry heritage) that defines the MPLS textual conventions relied upon by the other HP SN MPLS MIB modules. |
| HPN-ICF-MPLS-LDP-MIB | Manages Label Distribution Protocol (LDP) sessions, label bindings, and FEC tables on HP/Comware MPLS devices. |
| HPN-ICF-MPLS-LSR-MIB | Manages Label Switching Router (LSR) label-switched paths, in/out label mappings, and forwarding on HP/Comware devices. |
| HUAWEI-BGP-VPN-MIB | Huawei BGP VPN MIB for managing BGP/MPLS IP VPN instances, route targets, and VRF configuration on PE routers. |
| HUAWEI-MPLSOAM-MIB | Huawei MPLS OAM (Operations, Administration, and Maintenance) MIB for LSP connectivity verification and fault detection. |
| HUAWEI-PW-TC-MIB | Huawei pseudowire textual conventions MIB defining common data types used across Huawei pseudowire management modules. |
| MPLS-L3VPN-STD-MIB IPNM ✓ | Manages MPLS/BGP Layer 3 Virtual Private Networks (L3VPNs), including VRF configuration, routing, and associated interface bindings. |
| MPLS-LDP-STD-MIB IPNM ✓ | Manages the MPLS Label Distribution Protocol (LDP), used to distribute labels and establish Label Switched Paths (LSPs). |
| MPLS-LSR-MIB IPNM ✓ | Defines managed objects for MPLS Label Switching Routers, modeling incoming-to-outgoing label mappings on MPLS-enabled interfaces. |
| MPLS-LSR-STD-MIB IPNM ✓ | Manages MPLS Label Switching Router (LSR) functions, modeling incoming-to-outgoing label mappings via cross-connect entries on MPLS-enabled interfaces (RFC 3813). |
| MPLS-TC-STD-MIB IPNM ✓ | Defines SNMP textual conventions used by all other MPLS MIB modules, providing foundational data types for MPLS label switching management. |
| MPLS-TE-MIB IPNM ✓ | Provides SNMP management for MPLS Traffic Engineering, allowing retrieval and monitoring of traffic flows and tunnel configurations. |
| MPLS-TE-STD-MIB IPNM ✓ | Manages MPLS Traffic Engineering tunnels, providing configuration and statistics for TE tunnel LSPs that originate, traverse, or terminate on a given LSR (RFC 3812). |
| PRVT-CR-LDP-MIB | Manages BATM Advanced Communication Constraint-based Routing LDP (CR-LDP) tunnel configuration and LSP state. |
| RC-IP-MPLS-MIB | Manages MPLS label switching, LSP configuration, and forwarding entries on Bay Networks Rapid-City series switches. |
| TE-LINK-STD-MIB IPNM ✓ | Defines managed objects for managing traffic engineering (TE) links including bundled links. |
| TE-MIB IPNM ✓ | Manages MPLS Traffic Engineering tunnel LSPs, supporting both signalled (RSVP-TE, CR-LDP) and manually provisioned tunnels with persistent and non-persistent modes. |