HH3C-MPLS-LDP-MIB

All MIBs › HH3C-MPLS-LDP-MIB

Organization: Hangzhou H3C Tech. Co., Ltd.

Last Updated: 1999-06-30

Category: MPLS and Traffic Engineering, Vendor: H3C/HH3C

Description: Manages Label Distribution Protocol (LDP) sessions, label bindings, and FEC mappings on H3C MPLS routers.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is HH3C-MPLS-LDP-MIB?

HH3C-MPLS-LDP-MIB is an H3C proprietary MIB configuring LDP (Label Distribution Protocol) loop-prevention behavior for MPLS label-switched paths. Its LSR-incarnation table, keyed by LDP session, records the LSR ID, whether loop detection and loop prevention are present/enabled, the path-vector limit, hop-count limit, and the label-retention mode (conservative vs. liberal). As a configuration/protocol-status MIB it lets an administrator confirm loop-detection settings and label-retention mode are consistent across LDP peers when diagnosing an MPLS label-distribution anomaly. It is deployed on H3C routers running MPLS with LDP. Engineers can download the HH3C-MPLS-LDP-MIB file directly to load it into their MIB browser.

IPNetwork Monitor allows you to monitor SNMP objects defined in HH3C-MPLS-LDP-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

H3C routers running MPLS with LDP

Monitoring Examples

An administrator compares hh3cMplsLdpLsrLabelRetentionMode across LDP peers to confirm consistent label-retention behavior when troubleshooting unexpected label churn on an MPLS path.

What Can Be Monitored

LDP loop detection/prevention settings and label-retention mode

Imported Objects

From HH3C-OID-MIB

hh3cMpls

OBJECT-IDENTITY

From SNMPv2-CONF

MODULE-COMPLIANCE
NOTIFICATION-GROUP
OBJECT-GROUP

From SNMPv2-SMI

Counter32
Integer32
IpAddress
MODULE-IDENTITY
NOTIFICATION-TYPE
OBJECT-TYPE
Unsigned32

From SNMPv2-TC

RowStatus
TEXTUAL-CONVENTION
TimeInterval
TruthValue

How to Use in IPNetwork Monitor

Example using hh3cMplsLdpAttemptedSessions OID:

Select an H3C router running MPLS with LDP (loop-prevention config) as the target host to create a monitor — the SNMP service should be up and running on it. Click New Monitor, then check SNMP Custom on the Favorites tab, click Next, and confirm the host. On the next page, click Select... to open the built-in SNMP MIB Browser and type hh3cMplsLdpAttemptedSessions into the Find box to locate it in the OID tree, selecting the specific row/instance you want to monitor since this is a table column, then select it and click OK. It reports a count of the total attempted sessions for this LDP Entity. On the monitor's Main parameters page you can set the target's SNMP port (default 161), credentials, polling interval, and other settings — see the SNMP Monitor help for details. On the State conditions and Alerting tabs, configure when the monitor should change state and trigger an alert; since this is a Counter32-type OID, Value bounds is the most useful condition here — trigger an alert if the counter increases sharply between polls relative to its normal baseline, since an unexpected spike often reflects a real change in traffic or activity. Click Finish to create the monitor; you can adjust any parameter later.

OIDs

OID symbolic	OID numeric	Type	Access	Description
hh3cMplsLdp	1.3.6.1.4.1.25506.8.12.2			All rights reserved
C32 hh3cMplsLdpAttemptedSessionsEx	1.3.6.1.4.1.25506.8.12.2.1.2.4.1.1	Counter32	read-only	A count of the total attempted sessions for this LDP Entity.
INT hh3cMplsLdpCrlspErHopAddrType	1.3.6.1.4.1.25506.8.12.2.1.6.2.1.2	INTEGER	read-create	Address type of this hop.
hh3cMplsLdpCrlspErHopEntry	1.3.6.1.4.1.25506.8.12.2.1.6.2.1		not-accessible	An entry in this table represents a tunnel hop. An entry is created by a network administrator for signalled ERLSP set up by LDP or RSVP.
INT hh3cMplsLdpCrlspErHopIndex	1.3.6.1.4.1.25506.8.12.2.1.6.2.1.1	INTEGER	not-accessible	Secondary index into this table identifying the particular hop.
IP hh3cMplsLdpCrlspErHopIpv4Addr	1.3.6.1.4.1.25506.8.12.2.1.6.2.1.3	IpAddress	read-create	If hh3cMplsLdpCrlspErHopAddrType is ipV4(1), IPv4 address of this hop. This object is not significant otherwise and should return a value of 0.
INT hh3cMplsLdpCrlspErHopIpv4PrefixLen	1.3.6.1.4.1.25506.8.12.2.1.6.2.1.4	INTEGER	read-create	If hh3cMplsLdpCrlspErHopAddrType is ipV4(1), prefix length for this hop's IPv4 address. This object is not significant otherwise and should return a value of 0.
ROW hh3cMplsLdpCrlspErHopRowStatus	1.3.6.1.4.1.25506.8.12.2.1.6.2.1.6	RowStatus	read-create	For creating, modifying and deleting this row.
INT hh3cMplsLdpCrlspErHopStrictOrLoose	1.3.6.1.4.1.25506.8.12.2.1.6.2.1.5	INTEGER	read-create	Whether this is a strict or loose hop.
hh3cMplsLdpCrlspErHopTable	1.3.6.1.4.1.25506.8.12.2.1.6.2		not-accessible	The hh3cMplsLdpCrlspErHopTable is used to indicate the hops, strict or loose, for an MPLS CRLSP tunnel defined in hh3cMplsLdpCrlspTnlTable. There must be atleast one entry in this table for each CRLSP tunnel that is supported in the hh3cMplsLdpCrlspTnlTable. The first row in the table is the first hop after the origination point of the tunnel.
BUR hh3cMplsLdpCrlspTnlCommittedBurstSize	1.3.6.1.4.1.25506.8.12.2.1.6.1.1.10	BurstSize	read-create	The committed burst size - the committed burst size of the traffic that will be handled in the established CRLSP.
BIT hh3cMplsLdpCrlspTnlCommittedDataRate	1.3.6.1.4.1.25506.8.12.2.1.6.1.1.9	BitRate	read-create	The committed rate - the committed rate at which traffic will be sent on the CRLSP.
INT hh3cMplsLdpCrlspTnlDirection	1.3.6.1.4.1.25506.8.12.2.1.6.1.1.3	INTEGER	read-create	Whether this tunnel is unidirectional-incoming, unidirectional-outgoing, or bidirectional.
hh3cMplsLdpCrlspTnlEntry	1.3.6.1.4.1.25506.8.12.2.1.6.1.1		not-accessible	An entry in this table represents an CRLSP MPLS tunnel. An entry can be created by a network administrator.
BUR hh3cMplsLdpCrlspTnlExcessBurstSize	1.3.6.1.4.1.25506.8.12.2.1.6.1.1.11	BurstSize	read-create	The Excess burst size - the excess burst size limit to be used for traffic conditioning at the ingress of the CRLSP.
INT hh3cMplsLdpCrlspTnlFrequency	1.3.6.1.4.1.25506.8.12.2.1.6.1.1.13	INTEGER	read-create	Indicates the frequency of usage of the established CRLSP.
INT hh3cMplsLdpCrlspTnlHoldingPrio	1.3.6.1.4.1.25506.8.12.2.1.6.1.1.6	INTEGER	read-create	The holding priority for this tunnel.
MPL hh3cMplsLdpCrlspTnlIndex	1.3.6.1.4.1.25506.8.12.2.1.6.1.1.1	MplsTunnelIndex	accessible-for-notify	Uniquely identifies this row.
T/F hh3cMplsLdpCrlspTnlIsPinned	1.3.6.1.4.1.25506.8.12.2.1.6.1.1.12	TruthValue	read-create	Indicates whether the loose-routed hops of this tunnel are to be pinned.
STR hh3cMplsLdpCrlspTnlName	1.3.6.1.4.1.25506.8.12.2.1.6.1.1.2	DisplayString	read-create	The 'canonical' name assigned to the tunnel that can be used to refer to it on the 'console' port.
hh3cMplsLdpCrlspTnlObjects	1.3.6.1.4.1.25506.8.12.2.1.6
BUR hh3cMplsLdpCrlspTnlPeakBurstSize	1.3.6.1.4.1.25506.8.12.2.1.6.1.1.8	BurstSize	read-create	The peak burst size - the maximum burst size of the traffic that can occur in the established CRLSP.
BIT hh3cMplsLdpCrlspTnlPeakDataRate	1.3.6.1.4.1.25506.8.12.2.1.6.1.1.7	BitRate	read-create	The peak rate - the maximum rate at which traffic will be sent on the CRLSP.
ROW hh3cMplsLdpCrlspTnlRowStatus	1.3.6.1.4.1.25506.8.12.2.1.6.1.1.15	RowStatus	read-create	For controlling the state of this row. The status can be set to 'active' only when atleast one ERHOP is created in the hh3cMplsLdpErHopTable, associated with this tunnel.
INT hh3cMplsLdpCrlspTnlSetupPrio	1.3.6.1.4.1.25506.8.12.2.1.6.1.1.5	INTEGER	read-create	The setup priority of this tunnel.
INT hh3cMplsLdpCrlspTnlSignallingProto	1.3.6.1.4.1.25506.8.12.2.1.6.1.1.4	INTEGER	read-create	The signaling protocol, if any, that set up this tunnel.
hh3cMplsLdpCrlspTnlTable	1.3.6.1.4.1.25506.8.12.2.1.6.1		not-accessible	The hh3cMplsLdpCrlspTnlTable allows new CRLSP MPLS tunnels to be created. The ER hops associated with a CRLSP tunnel are to be configured using the hh3cMplsLdpCrlspErHopTable.
INT hh3cMplsLdpCrlspTnlWeight	1.3.6.1.4.1.25506.8.12.2.1.6.1.1.14	INTEGER	read-create	Indicates the weight that is the established CRLSP.
NTF hh3cMplsLdpCrlspTunnelDown	1.3.6.1.4.1.25506.8.12.2.2.0.3			This notification is generated when a CRLSP Row status is modified to destroy the CRLSP tunnel. - due to pre-emption etc.,
NTF hh3cMplsLdpCrlspTunnelSetupFailure	1.3.6.1.4.1.25506.8.12.2.2.0.4			This notification is generated by the Ingress LSR of the CRLSP tunnel on the receipt of Nak message from the downstream LSR for the Label request sent for the CRLSP tunnel. This can occur due to improper ER hop values being set, or Traffic resources not available etc.,
NTF hh3cMplsLdpCrlspTunnelUp	1.3.6.1.4.1.25506.8.12.2.2.0.2			This notification is generated by the Ingress LSR of the CRLSP tunnel on the receipt of Label mapping message from the downstream LSR for the LAbel request sent for the CRLSP tunnel.
hh3cMplsLdpEntityConfAtmLabelRangeEntry	1.3.6.1.4.1.25506.8.12.2.1.2.3.1		not-accessible	A row in the LDP Entity Configurable ATM Label Range Table. One entry in this table contains information on a single range of labels represented by the configured Upper and Lower Bounds VPI/VCI pairs. NOTE: The ranges for a specific LDP Entity are UNIQUE and non-overlapping. For example, for a specific LDP Entity index, there could be one entry having ConfLowerBound vpi/vci == 0/32, and ConfUpperBound vpi/vci == 0/100, and a second entry for this same interface with ConfLowerBound vpi/vci == 0/101 and ConfUpperBound vpi/vci == 0/200. However, there could not be a third entry with ConfLowerBound vpi/vci == 0/200 and ConfUpperBound vpi/vci == 0/300 because this label range overlaps with the second entry (i.e. both entries now have 0/200). A row will not be created unless a unique and non-overlapping range is specified. Thus, row creation implies a one-shot row creation of LDP EntityID and ConfLowerBound vpi/vci and ConfUpperBound vpi/vci. At least one label range entry for a specific LDP Entity MUST include the default VPI/VCI values denoted in the LDP Entity Table.
OID hh3cMplsLdpEntityConfAtmLabelRangeLowerBoundVCI	1.3.6.1.4.1.25506.8.12.2.1.2.3.1.2	AtmVcIdentifier	not-accessible	The minimum VCI number configured for this range.
OID hh3cMplsLdpEntityConfAtmLabelRangeLowerBoundVPI	1.3.6.1.4.1.25506.8.12.2.1.2.3.1.1	AtmVpIdentifier	not-accessible	The minimum VPI number configured for this range.
ROW hh3cMplsLdpEntityConfAtmLabelRangeRowStatus	1.3.6.1.4.1.25506.8.12.2.1.2.3.1.5	RowStatus	read-create	An object that allows entries in this table to be created and deleted using the RowStatus convention.
hh3cMplsLdpEntityConfAtmLabelRangeTable	1.3.6.1.4.1.25506.8.12.2.1.2.3		not-accessible	The MPLS LDP Entity Configurable ATM Label Range Table. The purpose of this table is to provide a mechanism for specifying a contiguous range of vpi's with a contiguous range of vci's, or a 'label range' for LDP Entities. LDP Entities which use ATM must have at least one entry in this table.
OID hh3cMplsLdpEntityConfAtmLabelRangeUpperBoundVCI	1.3.6.1.4.1.25506.8.12.2.1.2.3.1.4	AtmVcIdentifier	read-create	The maximum VCI number configured for this range.
OID hh3cMplsLdpEntityConfAtmLabelRangeUpperBoundVPI	1.3.6.1.4.1.25506.8.12.2.1.2.3.1.3	AtmVpIdentifier	read-create	The maximum VPI number configured for this range.
OID hh3cMplsLdpEntityDefVci	1.3.6.1.4.1.25506.8.12.2.1.2.1.1.4	AtmVcIdentifier	read-create	The Default VCI value used in the label for the default VCI.
OID hh3cMplsLdpEntityDefVpi	1.3.6.1.4.1.25506.8.12.2.1.2.1.1.3	AtmVpIdentifier	read-create	The Default VPI value used in the label for the default VPI.
NTF hh3cMplsLdpEntityDownEventFailure	1.3.6.1.4.1.25506.8.12.2.2.0.14			This notification is generated by LDP to notify the ENTITY DOWN Event failure
hh3cMplsLdpEntityEntry	1.3.6.1.4.1.25506.8.12.2.1.2.1.1		not-accessible	An entry in this table represents an LDP entity. An entry can be created by a network administrator or by an SNMP agent as instructed by LDP. An LPD Entity is uniquely indexed by its LPD Identifier.
INT hh3cMplsLdpEntityFailedInitSessionThreshold	1.3.6.1.4.1.25506.8.12.2.1.2.1.1.12	INTEGER	read-create	When attempting to establish a session with a given Peer, the given LDP Entity should send out a notification when exceeding this threshold. A value of 0 (zero) for this object indicates that the threshold is infinity. In other words, a notification will not be sent if the value of this object is 0 (zero).
INT hh3cMplsLdpEntityHelloHoldTimer	1.3.6.1.4.1.25506.8.12.2.1.2.1.1.15	INTEGER	read-create	The two octet value which is the proposed hello hold timer for this LDP Entity.
OID hh3cMplsLdpEntityID	1.3.6.1.4.1.25506.8.12.2.1.2.1.1.1	MplsLdpIdentifier	accessible-for-notify	The LDP identifier which uniquely identifies the LDP Entity. This is s six octet quantity which is used to identify an Label Switch Router (LSR) label space. The first four octets encode an IP address assigned to the LSR, and the last two octets identify a specific label space within the LSR.
hh3cMplsLdpEntityIfEntry	1.3.6.1.4.1.25506.8.12.2.1.2.2.1		not-accessible	An entry in this table represents an Interface that is associated with a LDP entity. An entry can be created by a network administrator or by an SNMP agent as instructed by LDP. An interface (row in this table) can be created/deleted only when the associted LDP Entity row status has the value notInService or notReady.
U32 hh3cMplsLdpEntityIfIndex	1.3.6.1.4.1.25506.8.12.2.1.2.2.1.1	Unsigned32	not-accessible	Identifier that uniquely identifies the Interface with respect to an LDP Entity. The ifIndex value corresponds to the IfIndex value of the MIB-II
IP hh3cMplsLdpEntityIfIpv4Address	1.3.6.1.4.1.25506.8.12.2.1.2.2.1.2	IpAddress	read-create	The IPv4 address associated with the interface.
ROW hh3cMplsLdpEntityIfRowStatus	1.3.6.1.4.1.25506.8.12.2.1.2.2.1.3	RowStatus	read-create	An object that allows entries in this table to be created and deleted using the RowStatus convention.
hh3cMplsLdpEntityIfTable	1.3.6.1.4.1.25506.8.12.2.1.2.2		not-accessible	This table contains information about the interfaces that are associated with an LDP Entity. There should be atleast one interface associated with each LDP Entity. If the LDP Entity supports 'per interface based label space' label type then, atmost one interface can be associated with the LDP entity. If the LDP Entity supports 'per platform based label space' label type then, more than one interface can be associated with the LDP Entity.
INT hh3cMplsLdpEntityKeepAliveHoldTimer	1.3.6.1.4.1.25506.8.12.2.1.2.1.1.11	INTEGER	read-create	The two octet value which is the proposed keep alive hold timer for this LDP Entity.
INT hh3cMplsLdpEntityLabelAllocationMethod	1.3.6.1.4.1.25506.8.12.2.1.2.1.1.14	INTEGER	read-create	For any given LDP session, the method of label allocation must be specified. Label can be allocated in either ordered mode or in the independent mode.
INT hh3cMplsLdpEntityLabelDistributionMethod	1.3.6.1.4.1.25506.8.12.2.1.2.1.1.13	INTEGER	read-create	For any given LDP session, the method of label distribution must be specified. Current release of H3CMPLS does not provide support for 'downstreamUnsolicited'.
INT hh3cMplsLdpEntityLabelSpaceType	1.3.6.1.4.1.25506.8.12.2.1.2.1.1.2	INTEGER	read-create	The type of label spaces associated with this LDP Entity. The values are 'unknown(1)' The type of label space is not known. 'perInterface(2)' The type of label space is tied to an interface. 'perPlatform(3)' The type of label space is tied to the platform.
INT hh3cMplsLdpEntityMergeCapability	1.3.6.1.4.1.25506.8.12.2.1.2.1.1.7	INTEGER	read-create	Sets the merge capability for this LDP entity. Current Release of H3CMPLS does not provide support for any kind of Merge.
INT hh3cMplsLdpEntityMtu	1.3.6.1.4.1.25506.8.12.2.1.2.1.1.10	INTEGER	read-create	The maximum transmission unit (MTU) that was configured for this entity.
hh3cMplsLdpEntityObjects	1.3.6.1.4.1.25506.8.12.2.1.2
ROW hh3cMplsLdpEntityRowStatus	1.3.6.1.4.1.25506.8.12.2.1.2.1.1.16	RowStatus	read-create	An object that allows entries in this table to be created and deleted using the RowStatus convention.
hh3cMplsLdpEntityStatsEntry	1.3.6.1.4.1.25506.8.12.2.1.2.4.1		not-accessible	A row in this table contains statistical information about an LDP Entity.
hh3cMplsLdpEntityStatsTable	1.3.6.1.4.1.25506.8.12.2.1.2.4		not-accessible	This table is a read-only table which augments the MplsLdpConfEntityTable. The purpose of this table is to keep statistical information about the LDP Entities on the LSR.
hh3cMplsLdpEntityTable	1.3.6.1.4.1.25506.8.12.2.1.2.1		not-accessible	This table contains information about the MPLS Label Distribution Protocol Entities which exist on this Label Switch Router (LSR).
OID hh3cMplsLdpEntityUnlabTrafVci	1.3.6.1.4.1.25506.8.12.2.1.2.1.1.6	AtmVcIdentifier	read-create	VCI value of the VCC supporting unlabeled traffic.
OID hh3cMplsLdpEntityUnlabTrafVpi	1.3.6.1.4.1.25506.8.12.2.1.2.1.1.5	AtmVpIdentifier	read-create	VPI value of the VCC supporting unlabeled traffic.
NTF hh3cMplsLdpEntityUpEventFailure	1.3.6.1.4.1.25506.8.12.2.2.0.13			This notification is generated by LDP to notify the ENTITY UP Event failure
INT hh3cMplsLdpEntityVcDirectionality	1.3.6.1.4.1.25506.8.12.2.1.2.1.1.8	INTEGER	read-create	Sets the VC directionality for this LDP entity.
INT hh3cMplsLdpEntityWellKnownDiscoveryPort	1.3.6.1.4.1.25506.8.12.2.1.2.1.1.9	INTEGER	read-create	The well known LDP Discovery Port.
NTF hh3cMplsLdpFailedInitSessionThresholdExceeded	1.3.6.1.4.1.25506.8.12.2.2.0.1			This notification is generated whenever the value of hh3cMplsLdpEntityFailedInitSessionThreshold is exceeded.
hh3cMplsLdpHelloAdjacencyEntry	1.3.6.1.4.1.25506.8.12.2.1.5.1.1		not-accessible	Each row represents a single LDP Hello Adjacency. An LDP Session can have one or more Hello adjacencies.
NUM hh3cMplsLdpHelloAdjacencyHoldTimeRemaining	1.3.6.1.4.1.25506.8.12.2.1.5.1.1.2	TimeInterval	read-only	The time remaining for this Hello Adjacency.
U32 hh3cMplsLdpHelloAdjacencyIndex	1.3.6.1.4.1.25506.8.12.2.1.5.1.1.1	Unsigned32	not-accessible	An identifier for the adjacency.
hh3cMplsLdpHelloAdjacencyObjects	1.3.6.1.4.1.25506.8.12.2.1.5
hh3cMplsLdpHelloAdjacencyTable	1.3.6.1.4.1.25506.8.12.2.1.5.1		not-accessible	A table of Hello Adjacencies for Sessions.
NTF hh3cMplsLdpIncarnDownEventFailure	1.3.6.1.4.1.25506.8.12.2.2.0.12			This notification is generated by LDP to notify the Incarnation DOWN Event failure
NTF hh3cMplsLdpIncarnUpEventFailure	1.3.6.1.4.1.25506.8.12.2.2.0.11			This notification is generated by LDP to notify the Incarnation UP Event failure
INT hh3cMplsLdpLsrHopCountLimit	1.3.6.1.4.1.25506.8.12.2.1.1.1.1.5	INTEGER	read-write	This object only has meaning if hh3cMplsLdpLsrLoopDetectionPresent has the value of 'true'. The value of this object represents the limit on the Hop Count which this LSR uses to treat the message as if it had traversed a loop.
OID hh3cMplsLdpLsrID	1.3.6.1.4.1.25506.8.12.2.1.1.1.1.1	MplsLsrIdentifier	read-write	The LSR's Identifier.
hh3cMplsLdpLsrIncarnEntry	1.3.6.1.4.1.25506.8.12.2.1.1.1.1		not-accessible	An entry in this table represents an LSR incarnation. All the entries in this table are created initially when the LDP is initiated. The row status of each entry will be in 'notInService' state initially. The row status must be set to 'active' after the necessary configurations are complete with respect to an incarnation. Currenlty the LSR ID of the incarnation is the only mandatory parameter that must be set before the rowStatus is set to 'active'. An LSR Incarnation Entity is uniquely indexed by its Incarnation Identifier.
INT hh3cMplsLdpLsrIncarnID	1.3.6.1.4.1.25506.8.12.2.1.1.1.1.9	INTEGER	read-only	The incarnation acts as index to all the elements in this table.
hh3cMplsLdpLsrIncarnTable	1.3.6.1.4.1.25506.8.12.2.1.1.1		not-accessible	H3CMPLS provides support for multiple incarnations of the MPLS Stack in a target. The LSR defined in the standard MIB is treated as an incarnation in this MIB. Using a local policy the Network administrator must group the LDP Entities that should be placed in an incarnation.
INT hh3cMplsLdpLsrLabelRetentionMode	1.3.6.1.4.1.25506.8.12.2.1.1.1.1.8	INTEGER	read-write	The LSR can be configured to use either conservative or liberal label retention mode. If the value of this object is conservative(1) then advertized label mappings are retained only if they will be used to forward packets, i.e. if label came from a valid next hop. If the value of this object is liberal(2) then all advertized label mappings are retained whether they are from a valid next hop or not. Current release of H3CMPLS does not provide support to assign this MIB object with a value 'liberal'.
INT hh3cMplsLdpLsrLoopDetectionAdminStatus	1.3.6.1.4.1.25506.8.12.2.1.1.1.1.3	INTEGER	read-write	To enable loop detection the value of this object should be 'enabled(1)'. Otherwise, to turn off loop detection, set this value to 'disabled(2)'.
T/F hh3cMplsLdpLsrLoopDetectionPresent	1.3.6.1.4.1.25506.8.12.2.1.1.1.1.2	TruthValue	read-only	A indication of whether this LSR supports loop detection. A value of 'true' indicates this LSR does support loop detection. A value of 'false' indicates this LSR does not support loop detection.
INT hh3cMplsLdpLsrLoopPreventionAdminStatus	1.3.6.1.4.1.25506.8.12.2.1.1.1.1.7	INTEGER	read-write	To enable loop prevention the value of this object should be 'enabled(1)'. Otherwise, to turn off loop prevention, set this value to 'disabled(2)'. Current release of H3CMPLS does not provide support to assign this MIB object with a value 'enabled'.
T/F hh3cMplsLdpLsrLoopPreventionPresent	1.3.6.1.4.1.25506.8.12.2.1.1.1.1.6	TruthValue	read-only	A indication of whether this LSR supports loop prevention. A value of 'true' indicates this LSR does support loop prevention. A value of 'false' indicates this LSR does not support loop prevention. Current release of H3CMPLS does not provide support to assign this MIB object with a value 'true'.
INT hh3cMplsLdpLsrMaxCrlspTnls	1.3.6.1.4.1.25506.8.12.2.1.1.1.1.15	INTEGER	read-write	The maximum number of CRLSPs that can be supported by this Incarnation.
INT hh3cMplsLdpLsrMaxErhopPerCrlspTnl	1.3.6.1.4.1.25506.8.12.2.1.1.1.1.16	INTEGER	read-write	The maximum number of ER-Hops that can be supported in a CRLSP tunnel.
INT hh3cMplsLdpLsrMaxIfaces	1.3.6.1.4.1.25506.8.12.2.1.1.1.1.13	INTEGER	read-write	The maximum number of Label enabled Interfaces that can be supported by this Incarnation.
INT hh3cMplsLdpLsrMaxLdpEntities	1.3.6.1.4.1.25506.8.12.2.1.1.1.1.10	INTEGER	read-write	The maximum number of LDP entities that can be supported by this Incarnation.
INT hh3cMplsLdpLsrMaxLocalPeers	1.3.6.1.4.1.25506.8.12.2.1.1.1.1.11	INTEGER	read-write	The maximum number of Local LDP peers that can be supported by this Incarnation.
INT hh3cMplsLdpLsrMaxLsps	1.3.6.1.4.1.25506.8.12.2.1.1.1.1.14	INTEGER	read-write	The maximum number of Label Switched Paths that can be supported by this Incarnation.
INT hh3cMplsLdpLsrMaxRemotePeers	1.3.6.1.4.1.25506.8.12.2.1.1.1.1.12	INTEGER	read-write	The maximum number of Remote LDP peers that can be supported by this Incarnation.
INT hh3cMplsLdpLsrMaxVcmCapability	1.3.6.1.4.1.25506.8.12.2.1.1.1.1.18	INTEGER	read-write
INT hh3cMplsLdpLsrNumOfRequestRetryAttempts	1.3.6.1.4.1.25506.8.12.2.1.1.1.1.21	INTEGER	read-write
hh3cMplsLdpLsrObjects	1.3.6.1.4.1.25506.8.12.2.1.1
INT hh3cMplsLdpLsrPathVectorLimit	1.3.6.1.4.1.25506.8.12.2.1.1.1.1.4	INTEGER	read-write	This object only has meaning if hh3cMplsLdpLsrLoopDetectionPresent has the value of 'true'. The value of this object represents the limit of path vectors which this LSR uses to treat the message as if it had traversed a loop.
INT hh3cMplsLdpLsrRequestRetrytimerValue	1.3.6.1.4.1.25506.8.12.2.1.1.1.1.20	INTEGER	read-write
ROW hh3cMplsLdpLsrRowStatus	1.3.6.1.4.1.25506.8.12.2.1.1.1.1.17	RowStatus	read-create	An object that allows entries in this table to be created and deleted using the RowStatus convention.
T/F hh3cMplsLdpLsrVcmPathVecInAllLblMapPresent	1.3.6.1.4.1.25506.8.12.2.1.1.1.1.19	TruthValue	read-write
hh3cMplsLdpNotificationPrefix	1.3.6.1.4.1.25506.8.12.2.2.0
hh3cMplsLdpNotifications	1.3.6.1.4.1.25506.8.12.2.2
hh3cMplsLdpObjects	1.3.6.1.4.1.25506.8.12.2.1
hh3cMplsLdpPeerConfAtmLabelRangeEntry	1.3.6.1.4.1.25506.8.12.2.1.3.2.1		not-accessible	A row in the LDP Peer Configurable ATM Label Range Table. One entry in this table contains information on a single range of labels represented by the configured Upper and Lower Bounds VPI/VCI pairs. NOTE: The ranges for a specific LDP Peer are UNIQUE and non-overlapping. For example, for a specific LDP Peer index, there could be one entry having ConfLowerBound vpi/vci == 0/32, and ConfUpperBound vpi/vci == 0/100, and a second entry for this same interface with ConfLowerBound vpi/vci == 0/101 and ConfUpperBound vpi/vci == 0/200. However, there could not be a third entry with ConfLowerBound vpi/vci == 0/200 and ConfUpperBound vpi/vci == 0/300 because this label range overlaps with the second entry (i.e. both entries now have 0/200). A row will not be created unless a unique and non-overlapping range is specified. Thus, row creation implies a one-shot row creation of LDP PeerIndex and ConfLowerBound vpi/vci and ConfUpperBound vpi/vci. At least one label range entry for a specific LDP Peer MUST include the default VPI/VCI values denoted in the LDP Peer Table.
OID hh3cMplsLdpPeerConfAtmLabelRangeLowerBoundVCI	1.3.6.1.4.1.25506.8.12.2.1.3.2.1.2	AtmVcIdentifier	not-accessible	The minimum VCI number configured for this range.
OID hh3cMplsLdpPeerConfAtmLabelRangeLowerBoundVPI	1.3.6.1.4.1.25506.8.12.2.1.3.2.1.1	AtmVpIdentifier	not-accessible	The minimum VPI number configured for this range.
hh3cMplsLdpPeerConfAtmLabelRangeTable	1.3.6.1.4.1.25506.8.12.2.1.3.2		not-accessible	The MPLS LDP Peer Configurable ATM Label Range Table. The purpose of this table is to provide a mechanism for specifying a contiguous range of vpi's with a contiguous range of vci's, or a 'label range' for LDP Peers. LDP Peers which use ATM must have at least one entry in this table.
OID hh3cMplsLdpPeerConfAtmLabelRangeUpperBoundVCI	1.3.6.1.4.1.25506.8.12.2.1.3.2.1.4	AtmVcIdentifier	read-only	The maximum VCI number configured for this range.
OID hh3cMplsLdpPeerConfAtmLabelRangeUpperBoundVPI	1.3.6.1.4.1.25506.8.12.2.1.3.2.1.3	AtmVpIdentifier	read-only	The maximum VPI number configured for this range.
INT hh3cMplsLdpPeerDefaultMtu	1.3.6.1.4.1.25506.8.12.2.1.3.1.1.5	INTEGER	read-create	The default maximum transmission unit (MTU) of the LDP Peer.
hh3cMplsLdpPeerEntry	1.3.6.1.4.1.25506.8.12.2.1.3.1.1		not-accessible	Information about a single Peer.
OID hh3cMplsLdpPeerID	1.3.6.1.4.1.25506.8.12.2.1.3.1.1.2	MplsLdpIdentifier	read-create	The LDP identifier of this LDP Peer.
U32 hh3cMplsLdpPeerIndex	1.3.6.1.4.1.25506.8.12.2.1.3.1.1.1	Unsigned32	not-accessible	An identifier for the LDP peer that is unique within the scope of this agent.
MPL hh3cMplsLdpPeerInternetworkAddr	1.3.6.1.4.1.25506.8.12.2.1.3.1.1.4	MplsLdpGenAddr	read-create	The value of the internetwork layer address of this LDP peer.
ADR hh3cMplsLdpPeerInternetworkAddrType	1.3.6.1.4.1.25506.8.12.2.1.3.1.1.3	AddressFamilyNumbers	read-create	The type of the internetwork layer address of this LDP peer. This object indicates how the value of hh3cMplsLdpPeerInternetworkAddr is to be interpreted.
INT hh3cMplsLdpPeerKeepAliveHoldTimer	1.3.6.1.4.1.25506.8.12.2.1.3.1.1.6	INTEGER	read-create	The two octet unsigned non zero INTEGER that indicates the number of seconds that this Peer proposes for the value of the KeepAlive Interval.
INT hh3cMplsLdpPeerLabelDistributionMethod	1.3.6.1.4.1.25506.8.12.2.1.3.1.1.7	INTEGER	read-create	For any given LDP session, the method of label distribution must be specified.
hh3cMplsLdpPeerObjects	1.3.6.1.4.1.25506.8.12.2.1.3
ROW hh3cMplsLdpPeerRowStatus	1.3.6.1.4.1.25506.8.12.2.1.3.1.1.9	RowStatus	read-create	An object that allows entries in this table to be created and deleted using the RowStatus convention.
hh3cMplsLdpPeerTable	1.3.6.1.4.1.25506.8.12.2.1.3.1		not-accessible	Information about LDP peers which have been discovered by the LDP Entities that are managed by this agent.
INT hh3cMplsLdpPeerType	1.3.6.1.4.1.25506.8.12.2.1.3.1.1.8	INTEGER	read-create	Indicates whether a peer is a local peer or a remote peer
OID hh3cMplsLdpSessionAtmLabelRangeLowerBoundVCI	1.3.6.1.4.1.25506.8.12.2.1.4.1.1.8	AtmVcIdentifier	read-only	The minimum VCI number for this range.
OID hh3cMplsLdpSessionAtmLabelRangeLowerBoundVPI	1.3.6.1.4.1.25506.8.12.2.1.4.1.1.7	AtmVpIdentifier	read-only	The minimum VPI number for this range.
OID hh3cMplsLdpSessionAtmLabelRangeUpperBoundVCI	1.3.6.1.4.1.25506.8.12.2.1.4.1.1.10	AtmVcIdentifier	read-only	The maximum VCI number for this range.
OID hh3cMplsLdpSessionAtmLabelRangeUpperBoundVPI	1.3.6.1.4.1.25506.8.12.2.1.4.1.1.9	AtmVpIdentifier	read-only	The maximum VPI number for this range.
NTF hh3cMplsLdpSessionDownEventFailure	1.3.6.1.4.1.25506.8.12.2.2.0.16			Generation of this trap occurs when the value of 'hh3cMplsLdpSessionState' leaves the 'operational(5)' state.
hh3cMplsLdpSessionEntry	1.3.6.1.4.1.25506.8.12.2.1.4.1.1		not-accessible	An entry in this table represents information on a single session between an LDP Entity and LDP Peer.
OID hh3cMplsLdpSessionID	1.3.6.1.4.1.25506.8.12.2.1.4.1.1.2	MplsLdpIdentifier	read-only	The LDP Session identifier.
U32 hh3cMplsLdpSessionIndex	1.3.6.1.4.1.25506.8.12.2.1.4.1.1.1	Unsigned32	not-accessible	An unique identifier for this entry such that it identifies a specific LDP Session.
NUM hh3cMplsLdpSessionKeepAliveHoldTimeRemaining	1.3.6.1.4.1.25506.8.12.2.1.4.1.1.4	TimeInterval	read-only	The keep alive hold time remaining for this session.
hh3cMplsLdpSessionObjects	1.3.6.1.4.1.25506.8.12.2.1.4
INT hh3cMplsLdpSessionProtocolVersion	1.3.6.1.4.1.25506.8.12.2.1.4.1.1.3	INTEGER	read-only	The version of the LDP Protocol which this session is using.
INT hh3cMplsLdpSessionRole	1.3.6.1.4.1.25506.8.12.2.1.4.1.1.5	INTEGER	read-only	An indication of whether the LDP Entity associated with this session is acting in an 'active' role or a 'passive' role.
INT hh3cMplsLdpSessionState	1.3.6.1.4.1.25506.8.12.2.1.4.1.1.6	INTEGER	read-only	The current state of the session, all of the states 1 - 5 are based on the state machine for session negotiation behavior.
hh3cMplsLdpSessionTable	1.3.6.1.4.1.25506.8.12.2.1.4.1		not-accessible	A table of Sessions between the LDP Entities and LDP Peers.
NTF hh3cMplsLdpSessionUpEventFailure	1.3.6.1.4.1.25506.8.12.2.2.0.15			Generation of this trap occurs when the value of 'hh3cMplsLdpSessionState' enters the 'operational(5)' state.

RFC description

Manages MPLS Label Distribution Protocol (LDP) configuration and monitoring for H3C network devices.

Start monitoring H3C router running MPLS with LDP (loop-prevention config) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download HH3C-MPLS-LDP-MIB