All MIBs › HH3C-MPLS-LSR-MIB
Organization: Hangzhou H3C Tech. Co., Ltd.
Last Updated: 2000-07-12
Category: MPLS and Traffic Engineering, Vendor: H3C/HH3C
Description: Manages MPLS Label Switching Router (LSR) label forwarding entries and interface parameters on H3C devices.
Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.
What Is HH3C-MPLS-LSR-MIB?
HH3C-MPLS-LSR-MIB is an H3C (Hangzhou Huawei-3Com, now HPE Networking) proprietary MIB modeled on the IETF MPLS-LSR architecture draft, used to manage MPLS Label Switching Router (LSR) interface parameters on H3C routers and switches. It exposes configuration and status data about MPLS-enabled interfaces, including label range allocation, participation type, and per-interface performance/bandwidth counters. Its monitoring value centers on interface-level hardware/software health for MPLS forwarding: administrators track total versus available bandwidth and label pool utilization to catch bandwidth exhaustion or label-space depletion that would degrade LSP (Label Switched Path) establishment. It is explicitly derived from and dependent on the IETF MPLS architecture draft (draft-ietf-mpls-arch-06), and typically complements other MPLS MIBs (LDP, TE) for a complete label-switching management picture. It is deployed on H3C/HPE core and edge routers participating in MPLS-based service provider or enterprise backbone networks. Engineers can download the HH3C-MPLS-LSR-MIB file directly to load it into their MIB browser.
IPNetwork Monitor allows you to monitor SNMP objects defined in HH3C-MPLS-LSR-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.
Supported Devices
- H3C/HPE MPLS-capable router or switch
Monitoring Examples
An admin would poll hh3cmplsInterfaceConfTable/hh3cmplsInterfaceConfEntry, indexed by hh3cmplsInterfaceConfIndex, to read hh3cmplsInterfaceTotalBandwidth alongside hh3cmplsInterfaceAvailableBandwidth and detect when available bandwidth on an MPLS-enabled interface is nearing exhaustion. Checking hh3cmplsInterfaceLabelMinIn/hh3cmplsInterfaceLabelMaxIn against hh3cmplsInterfaceLabelMinOut/hh3cmplsInterfaceLabelMaxOut reveals whether the configured inbound/outbound label ranges are large enough for current LSP demand. hh3cmplsInterfacePerfTable would additionally be polled for per-interface MPLS performance counters to spot forwarding errors or drops.
What Can Be Monitored
- MPLS interface total bandwidth
- MPLS interface available bandwidth
- inbound/outbound label ranges
- label participation type
- MPLS interface performance counters
This MIB depends on
Related MIBs
Imported Objects
From HH3C-OID-MIB
| hh3cMpls | OBJECT-IDENTITY |
From IANA-ADDRESS-FAMILY-NUMBERS-MIB
| AddressFamilyNumbers |
From IF-MIB
| InterfaceIndex | |
| InterfaceIndexOrZero |
From INET-ADDRESS-MIB
| InetAddressIPv4 | |
| InetAddressIPv6 | |
| InetAddressType |
From SNMPv2-CONF
| MODULE-COMPLIANCE | |
| NOTIFICATION-GROUP | |
| OBJECT-GROUP |
From SNMPv2-SMI
| Counter32 | |
| Counter64 | |
| Gauge32 | |
| Integer32 | |
| MODULE-IDENTITY | |
| NOTIFICATION-TYPE | |
| OBJECT-TYPE | |
| Unsigned32 |
From SNMPv2-TC
| RowPointer | |
| RowStatus | |
| StorageType | |
| TEXTUAL-CONVENTION | |
| TimeStamp | |
| TruthValue |
How to Use in IPNetwork Monitor
Example using hh3cmplsInSegmentHCOctets OID:
Select an H3C/HPE MPLS-capable router/switch (Label Switching Router interfaces) as the target host to create a monitor — the SNMP service should be up and running on it. Click New Monitor, then check SNMP Custom on the Favorites tab, click Next, and confirm the host. On the next page, click Select... to open the built-in SNMP MIB Browser and type hh3cmplsInSegmentHCOctets into the Find box to locate it in the OID tree, then select it and click OK. The total number of octets received. This is the 64 bit version of hh3cmplsInSegmentOctets. On the monitor's Main parameters page you can set the target's SNMP port (default 161), credentials, polling interval, and other settings — see the SNMP Monitor help for details. On the State conditions and Alerting tabs, configure when the monitor should change state and trigger an alert; since this is a Counter64-type OID, Value bounds is the most useful condition here — trigger an alert if the counter increases sharply between polls relative to its normal baseline, since an unexpected spike often reflects a real change in traffic or activity. Click Finish to create the monitor; you can adjust any parameter later.
OIDs
| OID symbolic | OID numeric | Type | Access | Description |
|---|---|---|---|---|
| hh3cmplsHCInSegmentPerfGroup | 1.3.6.1.4.1.25506.8.12.1.3.1.7 | Object(s) providing performance information specific to out-segments for which the object hh3cmplsInterfaceInOctets wraps around too quickly. | ||
| hh3cmplsHCOutSegmentPerfGroup | 1.3.6.1.4.1.25506.8.12.1.3.1.8 | Object(s) providing performance information specific to out-segments for which the object hh3cmplsInterfaceOutOctets wraps around too quickly. | ||
| ADR hh3cmplsInSegmentAddrFamily | 1.3.6.1.4.1.25506.8.12.1.1.3.1.4 | AddressFamilyNumbers | read-create | The IANA address family [IANAFamily] of the incoming packet. A value of other(0) indicates that the family type is either unknown or undefined. |
| C32 hh3cmplsInSegmentDiscards | 1.3.6.1.4.1.25506.8.12.1.1.4.1.4 | Counter32 | read-only | The number of labeled packets received on this in- segment, which were chosen to be discarded even though no errors had been detected to prevent their being transmitted. One possible reason for discarding such a labeled packet could be to free up buffer space. |
| hh3cmplsInSegmentEntry | 1.3.6.1.4.1.25506.8.12.1.1.3.1 | not-accessible | An entry in this table represents one incoming segment. An entry can be created by a network administrator or an SNMP agent, or an MPLS signaling protocol. The creator of the entry is denoted by hh3cmplsInSegmentOwner. An entry in this table is indexed by the ifIndex of the incoming interface and the (top) label. | |
| C32 hh3cmplsInSegmentErrors | 1.3.6.1.4.1.25506.8.12.1.1.4.1.3 | Counter32 | read-only | The number of errored packets received on this segment. |
| hh3cmplsInSegmentGroup | 1.3.6.1.4.1.25506.8.12.1.3.1.2 | Collection of objects needed to implement an in- segment. | ||
| C64 hh3cmplsInSegmentHCOctetsEx | 1.3.6.1.4.1.25506.8.12.1.1.4.1.5 | Counter64 | read-only | The total number of octets received. This is the 64 bit version of hh3cmplsInSegmentOctets. |
| NUM hh3cmplsInSegmentIfIndex | 1.3.6.1.4.1.25506.8.12.1.1.3.1.1 | InterfaceIndexOrZero | accessible-for-notify | This is a unique index for an entry in the hh3cmplsInSegmentTable. This value represents the interface index for the incoming MPLS interface. A value of zero represents an incoming label from the per-platform label space. In this case, the hh3cmplsInSegmentLabel is interpreted to be an MPLS-type label. |
| HH3 hh3cmplsInSegmentLabel | 1.3.6.1.4.1.25506.8.12.1.1.3.1.2 | Hh3cMplsLabel | accessible-for-notify | The incoming label for this segment. |
| I32 hh3cmplsInSegmentNPop | 1.3.6.1.4.1.25506.8.12.1.1.3.1.3 | Integer32 | read-create | The number of labels to pop from the incoming packet. Normally only the top label is popped from the packet and used for all switching decisions for that packet. Note that technologies which do not support label popping should set this value to its default value of 1. |
| C32 hh3cmplsInSegmentOctets | 1.3.6.1.4.1.25506.8.12.1.1.4.1.1 | Counter32 | read-only | This value represents the total number of octets received by this segment. |
| HH3 hh3cmplsInSegmentOwner | 1.3.6.1.4.1.25506.8.12.1.1.3.1.6 | Hh3cMplsObjectOwner | read-create | Denotes the entity that created and is responsible for managing this segment. |
| C32 hh3cmplsInSegmentPackets | 1.3.6.1.4.1.25506.8.12.1.1.4.1.2 | Counter32 | read-only | Total number of packets received by this segment. |
| TIM hh3cmplsInSegmentPerfDiscontinuityTime | 1.3.6.1.4.1.25506.8.12.1.1.4.1.6 | TimeStamp | read-only | The value of sysUpTime on the most recent occasion at which any one or more of this segment's Counter32 or Counter64 suffered a discontinuity. If no such discontinuities have occurred since the last re- initialization of the local management subsystem, then this object contains a zero value. |
| hh3cmplsInSegmentPerfEntry | 1.3.6.1.4.1.25506.8.12.1.1.4.1 | not-accessible | An entry in this table contains statistical information about one incoming segment which was configured in the hh3cmplsInSegmentTable. The counters in this entry should behave in a manner similar to that of the interface. | |
| hh3cmplsInSegmentPerfTable | 1.3.6.1.4.1.25506.8.12.1.1.4 | not-accessible | This table contains statistical information for incoming MPLS segments to an LSR. | |
| ROW hh3cmplsInSegmentRowStatus | 1.3.6.1.4.1.25506.8.12.1.1.3.1.8 | RowStatus | read-create | This variable is used to create, modify, and/or delete a row in this table. |
| STO hh3cmplsInSegmentStorageType | 1.3.6.1.4.1.25506.8.12.1.1.3.1.9 | StorageType | read-create | This variable indicates the storage type for this object. |
| hh3cmplsInSegmentTable | 1.3.6.1.4.1.25506.8.12.1.1.3 | not-accessible | This table contains a collection of incoming segments to an LSR. | |
| NUM hh3cmplsInSegmentTrafficParamPtr | 1.3.6.1.4.1.25506.8.12.1.1.3.1.7 | RowPointer | read-create | This variable represents a pointer to the traffic parameter specification for this in-segment. This value may point at an entry in the hh3cmplsTrafficParamTable to indicate which hh3cmplsTrafficParamEntry is to be assigned to this segment. This value may optionally point at an externally defined traffic parameter specification table. A value of zero-dot-zero indicates best-effort treatment. By having the same value of this object, two or more segments can indicate resource sharing. |
| I32 hh3cmplsInSegmentXCIndex | 1.3.6.1.4.1.25506.8.12.1.1.3.1.5 | Integer32 | read-only | Index into hh3cmplsXCTable which identifies which cross- connect entry this segment is part of. A value of zero indicates that this entry is not referred to by any cross-connect entry. When a cross-connect entry is created which this in-segment is a part of, this object is automatically updated to reflect the value of hh3cmplsXCIndex of that cross-connect entry. |
| HH3 hh3cmplsInterfaceAvailableBandwidth | 1.3.6.1.4.1.25506.8.12.1.1.1.1.7 | Hh3cMplsBitRate | read-only | This value indicates the total amount of available bandwidth available on this interface and is specified in kilobits per second (Kbps). This value is calculated as the difference between the amount of bandwidth currently in use and that specified in hh3cmplsInterfaceTotalBandwidth. This variable is not applicable when applied to the interface with index 0. |
| hh3cmplsInterfaceConfEntry | 1.3.6.1.4.1.25506.8.12.1.1.1.1 | not-accessible | An entry in this table is created by an LSR for every interface capable of supporting MPLS. The entry with index 0 represents the per-platform label space and contains parameters that apply to all interfaces that participate in the per-platform label space. Other entries defined in this table represent additional MPLS interfaces that may participate in either the per-platform or per- interface label spaces, or both. Additional information about label space participation of an interface is provided in the description clause of hh3cmplsInterfaceLabelParticipationType. | |
| NUM hh3cmplsInterfaceConfIndex | 1.3.6.1.4.1.25506.8.12.1.1.1.1.1 | InterfaceIndexOrZero | not-accessible | This is a unique index for an entry in the hh3cmplsInterfaceConfTable. A non-zero index for an entry indicates the ifIndex for the corresponding interface entry in of the MPLS-layer in the ifTable. Note that the per-platform label space may apply to several interfaces, and therefore the configuration of the per-platform label space interface parameters will apply to all of the interfaces that are participating in the per-platform label space. |
| STO hh3cmplsInterfaceConfStorageType | 1.3.6.1.4.1.25506.8.12.1.1.1.1.9 | StorageType | read-create | The storage type for this entry. |
| hh3cmplsInterfaceConfTable | 1.3.6.1.4.1.25506.8.12.1.1.1 | not-accessible | This table specifies per-interface MPLS capability and associated information. | |
| C32 hh3cmplsInterfaceFailedLabelLookup | 1.3.6.1.4.1.25506.8.12.1.1.2.1.2 | Counter32 | read-only | This object counts the number of labeled packets that have been received on this interface and were discarded because there was no matching cross-connect entry. This object MUST count on a per-interface basis regardless of which label space the interface participates in. |
| hh3cmplsInterfaceGroup | 1.3.6.1.4.1.25506.8.12.1.3.1.1 | Collection of objects needed for MPLS interface configuration and performance information. | ||
| G32 hh3cmplsInterfaceInLabelsUsed | 1.3.6.1.4.1.25506.8.12.1.1.2.1.1 | Gauge32 | read-only | This object counts the number of labels that are in use at this point in time on this interface in the incoming direction. If the interface participates in the per-platform label space only, then this instance of this object MUST be identical with the instance with index 0. If the interface participates in the per-interface label space, then this this instance of this object MUST represent the number of of per-interface labels that are in use at this point in time on this interface. |
| HH3 hh3cmplsInterfaceLabelMaxIn | 1.3.6.1.4.1.25506.8.12.1.1.1.1.3 | Hh3cMplsLabel | read-only | This is the maximum value of an MPLS label that this LSR is willing to receive on this interface. |
| HH3 hh3cmplsInterfaceLabelMaxOut | 1.3.6.1.4.1.25506.8.12.1.1.1.1.5 | Hh3cMplsLabel | read-only | This is the maximum value of an MPLS label that this LSR is willing to send on this interface. |
| HH3 hh3cmplsInterfaceLabelMinIn | 1.3.6.1.4.1.25506.8.12.1.1.1.1.2 | Hh3cMplsLabel | read-only | This is the minimum value of an MPLS label that this LSR is willing to receive on this interface. |
| HH3 hh3cmplsInterfaceLabelMinOut | 1.3.6.1.4.1.25506.8.12.1.1.1.1.4 | Hh3cMplsLabel | read-only | This is the minimum value of an MPLS label that this LSR is willing to send on this interface. |
| BIT hh3cmplsInterfaceLabelParticipationType | 1.3.6.1.4.1.25506.8.12.1.1.1.1.8 | Bits | read-only | Either the perPlatform(0) or perInterface(1) bit MUST be set. If the value of the hh3cmplsInterfaceConfIndex for this entry is zero, then only the perPlatform(0) bit MUST be set and the perInterface(1) bit is meaningless. If the perInterface(1) bit is set then the value of hh3cmplsInterfaceLabelMinIn, hh3cmplsInterfaceLabelMaxIn, hh3cmplsInterfaceLabelMinOut, and hh3cmplsInterfaceLabelMaxOut for this entry reflect the label ranges for this interface. If only the perPlatform(0) bit is set, then the value of hh3cmplsInterfaceLabelMinIn, hh3cmplsInterfaceLabelMaxIn, hh3cmplsInterfaceLabelMinOut, and hh3cmplsInterfaceLabelMaxOut for this entry must be identical to the instance of these objects with index 0. |
| C32 hh3cmplsInterfaceOutFragments | 1.3.6.1.4.1.25506.8.12.1.1.2.1.4 | Counter32 | read-only | This object counts the number of outgoing MPLS packets that required fragmentation before transmission on this interface. This object transmission on this interface. This object MUST count on a per-interface basis regardless of which label space the interface participates in. |
| G32 hh3cmplsInterfaceOutLabelsUsed | 1.3.6.1.4.1.25506.8.12.1.1.2.1.3 | Gauge32 | read-only | This object counts the number of top-most labels in the outgoing label stacks that are in use at this point in time on this interface. This object MUST count on a per-interface basis regardless of which label space the interface participates in. |
| hh3cmplsInterfacePerfEntry | 1.3.6.1.4.1.25506.8.12.1.1.2.1 | not-accessible | An entry in this table is created by the LSR for every interface capable of supporting MPLS. Its is an extension to the hh3cmplsInterfaceConfEntry table. | |
| hh3cmplsInterfacePerfTable | 1.3.6.1.4.1.25506.8.12.1.1.2 | not-accessible | This table provides MPLS performance information on a per-interface basis. | |
| HH3 hh3cmplsInterfaceTotalBandwidth | 1.3.6.1.4.1.25506.8.12.1.1.1.1.6 | Hh3cMplsBitRate | read-only | This value indicates the total amount of usable bandwidth on this interface and is specified in kilobits per second (Kbps). This variable is not applicable when applied to the interface with index 0. |
| hh3cmplsLabelStackEntry | 1.3.6.1.4.1.25506.8.12.1.1.12.1 | not-accessible | An entry in this table represents one label which is to be pushed onto an outgoing packet, beneath the top label. An entry can be created by a network administrator or by an SNMP agent as instructed by an MPLS signaling protocol. | |
| hh3cmplsLabelStackGroup | 1.3.6.1.4.1.25506.8.12.1.3.1.12 | Objects needed to support label stacking. | ||
| I32 hh3cmplsLabelStackIndex | 1.3.6.1.4.1.25506.8.12.1.1.12.1.1 | Integer32 | not-accessible | Primary index for this row identifying a stack of labels to be pushed on an outgoing packet, beneath the top label. |
| I32 hh3cmplsLabelStackIndexNext | 1.3.6.1.4.1.25506.8.12.1.1.11 | Integer32 | read-only | This object contains an appropriate value to be used for hh3cmplsLabelStackIndex when creating entries in the hh3cmplsLabelStackTable. The value 0 indicates that no unassigned entries are available. To obtain an hh3cmplsLabelStackIndex value for a new entry, the manager issues a management protocol retrieval operation to obtain the current value of this object. After each retrieval operation, the agent should modify the value to reflect the next unassigned index. After a manager retrieves a value the agent will determine through its local policy when this index value will be made available for reuse. |
| HH3 hh3cmplsLabelStackLabel | 1.3.6.1.4.1.25506.8.12.1.1.12.1.3 | Hh3cMplsLabel | read-create | The label to pushed. |
| I32 hh3cmplsLabelStackLabelIndex | 1.3.6.1.4.1.25506.8.12.1.1.12.1.2 | Integer32 | not-accessible | Secondary index for this row identifying one label of the stack. Note that an entry with a smaller hh3cmplsLabelStackLabelIndex would refer to a label higher up the label stack and would be popped at a downstream LSR before a label represented by a higher hh3cmplsLabelStackLabelIndex at a downstream LSR. |
| ROW hh3cmplsLabelStackRowStatus | 1.3.6.1.4.1.25506.8.12.1.1.12.1.4 | RowStatus | read-create | For creating, modifying, and deleting this row. |
| STO hh3cmplsLabelStackStorageType | 1.3.6.1.4.1.25506.8.12.1.1.12.1.5 | StorageType | read-create | Defines the storage type for this object. |
| hh3cmplsLabelStackTable | 1.3.6.1.4.1.25506.8.12.1.1.12 | not-accessible | This table specifies the label stack to be pushed onto a packet, beneath the top label. Entries into this table are referred to from hh3cmplsXCTable. | |
| hh3cMplsLsr | 1.3.6.1.4.1.25506.8.12.1 | This MIB contains managed object definitions for the Multiprotocol Label Switching (MPLS) Router as defined in: Rosen, E., Viswanathan, A., and R. Callon, Multiprotocol Label Switching Architecture, Internet Draft , August 1999. | ||
| hh3cmplsLsrCompliances | 1.3.6.1.4.1.25506.8.12.1.3.2 | |||
| hh3cmplsLsrConformance | 1.3.6.1.4.1.25506.8.12.1.3 | |||
| hh3cmplsLsrGroups | 1.3.6.1.4.1.25506.8.12.1.3.1 | |||
| hh3cmplsLsrModuleCompliance | 1.3.6.1.4.1.25506.8.12.1.3.2.1 | Compliance statement for agents that support the MPLS LSR MIB. | ||
| hh3cmplsLsrNotificationGroup | 1.3.6.1.4.1.25506.8.12.1.3.1.14 | Set of notifications implemented in this module. None is mandatory. | ||
| hh3cmplsLsrNotifications | 1.3.6.1.4.1.25506.8.12.1.2 | |||
| hh3cmplsLsrNotifyPrefix | 1.3.6.1.4.1.25506.8.12.1.2.0 | |||
| hh3cmplsLsrObjects | 1.3.6.1.4.1.25506.8.12.1.1 | |||
| I32 hh3cmplsMaxLabelStackDepth | 1.3.6.1.4.1.25506.8.12.1.1.10 | Integer32 | read-only | The maximum stack depth supported by this LSR. |
| C32 hh3cmplsOutSegmentDiscards | 1.3.6.1.4.1.25506.8.12.1.1.7.1.4 | Counter32 | read-only | The number of labeled packets received on this out- segment, which were chosen to be discarded even though no errors had been detected to prevent their being transmitted. One possible reason for discarding such a labeled packet could be to free up buffer space. |
| hh3cmplsOutSegmentEntry | 1.3.6.1.4.1.25506.8.12.1.1.6.1 | not-accessible | An entry in this table represents one outgoing segment. An entry can be created by a network administrator or an SNMP agent, or an MPLS signaling protocol. The object hh3cmplsOutSegmentOwner indicates the creator of this entry. | |
| C32 hh3cmplsOutSegmentErrors | 1.3.6.1.4.1.25506.8.12.1.1.7.1.3 | Counter32 | read-only | Number of packets that could not be sent due to errors on this segment. |
| hh3cmplsOutSegmentGroup | 1.3.6.1.4.1.25506.8.12.1.3.1.3 | Collection of objects needed to implement an out- segment. | ||
| C64 hh3cmplsOutSegmentHCOctets | 1.3.6.1.4.1.25506.8.12.1.1.7.1.5 | Counter64 | read-only | Total number of octets sent. This is the 64 bit version of hh3cmplsOutSegmentOctets. |
| NUM hh3cmplsOutSegmentIfIndex | 1.3.6.1.4.1.25506.8.12.1.1.6.1.2 | InterfaceIndex | read-create | This value contains the interface index of the outgoing interface. |
| I32 hh3cmplsOutSegmentIndex | 1.3.6.1.4.1.25506.8.12.1.1.6.1.1 | Integer32 | accessible-for-notify | This value contains a unique index for this row. While a value of 0 is not valid as an index for this row it can be supplied as a valid value to index hh3cmplsXCTable to access entries for which no out- segment has been configured. |
| I32 hh3cmplsOutSegmentIndexNext | 1.3.6.1.4.1.25506.8.12.1.1.5 | Integer32 | read-only | This object contains the next appropriate value to be used for hh3cmplsOutSegmentIndex when creating entries in the hh3cmplsOutSegmentTable. If the number of unassigned entries is exhausted, this object will take on the value of 0. To obtain the hh3cmplsOutSegmentIndex value for a new entry, the manager must first issue a management protocol retrieval operation to obtain the current value of this object. The agent should modify the value to reflect the next unassigned index after each retrieval operation. After a manager retrieves a value the agent will determine through its local policy when this index value will be made available for reuse. |
| IPt hh3cmplsOutSegmentNextHopIpAddrType | 1.3.6.1.4.1.25506.8.12.1.1.6.1.5 | InetAddressType | read-create | Indicates whether the next hop address is IPv4 or IPv6. Note that a value of unknown (0) is valid only when the outgoing interface is of type point-to- point. |
| ADR hh3cmplsOutSegmentNextHopIpv4Addr | 1.3.6.1.4.1.25506.8.12.1.1.6.1.6 | InetAddressIPv4 | read-create | IPv4 Address of the next hop. Its value is significant only when hh3cmplsOutSegmentNextHopIpAddrType is ipV4 (1), otherwise it should return a value of 0. |
| ADR hh3cmplsOutSegmentNextHopIpv6Addr | 1.3.6.1.4.1.25506.8.12.1.1.6.1.7 | InetAddressIPv6 | read-create | IPv6 address of the next hop. Its value is significant only when hh3cmplsOutSegmentNextHopIpAddrType is ipV6 (2), otherwise it should return a value of 0. |
| C32 hh3cmplsOutSegmentOctets | 1.3.6.1.4.1.25506.8.12.1.1.7.1.1 | Counter32 | read-only | This value contains the total number of octets sent on this segment. |
| HH3 hh3cmplsOutSegmentOwner | 1.3.6.1.4.1.25506.8.12.1.1.6.1.9 | Hh3cMplsObjectOwner | read-create | Denotes the entity which created and is responsible for managing this segment. |
| C32 hh3cmplsOutSegmentPackets | 1.3.6.1.4.1.25506.8.12.1.1.7.1.2 | Counter32 | read-only | This value contains the total number of packets sent on this segment. |
| TIM hh3cmplsOutSegmentPerfDiscontinuityTime | 1.3.6.1.4.1.25506.8.12.1.1.7.1.6 | TimeStamp | read-only | The value of sysUpTime on the most recent occasion at which any one or more of this segment's Counter32 or Counter64 suffered a discontinuity. If no such discontinuities have occurred since the last re- initialization of the local management subsystem, then this object contains a zero value. |
| hh3cmplsOutSegmentPerfEntry | 1.3.6.1.4.1.25506.8.12.1.1.7.1 | not-accessible | An entry in this table contains statistical information about one outgoing segment configured in hh3cmplsOutSegmentTable. | |
| hh3cmplsOutSegmentPerfTable | 1.3.6.1.4.1.25506.8.12.1.1.7 | not-accessible | This table contains statistical information about outgoing segments from an LSR. The counters in this entry should behave in a manner similar to that of the interface. | |
| T/F hh3cmplsOutSegmentPushTopLabel | 1.3.6.1.4.1.25506.8.12.1.1.6.1.3 | TruthValue | read-create | This value indicates whether or not a top label should be pushed onto the outgoing packet's label stack. The value of this variable must be set to true if the outgoing interface does not support pop- and-go (for example an ATM interface) or if it is a tunnel origination. Note that it is considered an error in the case that hh3cmplsOutSegmentPushTopLabel is set to false, but the cross-connect entry which refers to this out-segment has a non-zero hh3cmplsLabelStackIndex. The LSR MUST ensure that this situation does not happen |
| ROW hh3cmplsOutSegmentRowStatus | 1.3.6.1.4.1.25506.8.12.1.1.6.1.11 | RowStatus | read-create | For creating, modifying, and deleting this row. |
| STO hh3cmplsOutSegmentStorageType | 1.3.6.1.4.1.25506.8.12.1.1.6.1.12 | StorageType | read-create | This variable indicates the storage type for this object. |
| hh3cmplsOutSegmentTable | 1.3.6.1.4.1.25506.8.12.1.1.6 | not-accessible | This table contains a representation of the outgoing segments from an LSR. | |
| HH3 hh3cmplsOutSegmentTopLabel | 1.3.6.1.4.1.25506.8.12.1.1.6.1.4 | Hh3cMplsLabel | read-create | If hh3cmplsOutSegmentPushTopLabel is true then this represents the label that should be pushed onto the top of the outgoing packet's label stack. |
| NUM hh3cmplsOutSegmentTrafficParamPtr | 1.3.6.1.4.1.25506.8.12.1.1.6.1.10 | RowPointer | read-create | This variable represents a pointer to the traffic parameter specification for this out-segment. This value may point at an entry in the hh3cmplsTrafficParamTable to indicate which hh3cmplsTrafficParamEntry is to be assigned to this segment. This value may optionally point at an externally defined traffic parameter specification table. A value of zero-dot-zero indicates best- effort treatment. By having the same value of this object, two or more segments can indicate resource sharing. |
| I32 hh3cmplsOutSegmentXCIndex | 1.3.6.1.4.1.25506.8.12.1.1.6.1.8 | Integer32 | read-only | Index into hh3cmplsXCTable which identifies which cross- connect entry this segment is part of. A value of zero indicates that this entry is not referred to by any cross-connect entry. When a cross-connect entry is created which this out-segment is a part of, this object is automatically updated to reflect the value of hh3cmplsXCIndex of that cross-connect entry. |
| hh3cmplsPerfGroup | 1.3.6.1.4.1.25506.8.12.1.3.1.6 | Collection of objects providing performance information about an LSR. | ||
| hh3cmplsSegmentDiscontinuityGroup | 1.3.6.1.4.1.25506.8.12.1.3.1.13 | A collection of objects providing information specific to segment discontinuities.. | ||
| hh3cmplsTrafficParamEntry | 1.3.6.1.4.1.25506.8.12.1.1.14.1 | not-accessible | An entry in this table represents the TrafficParam objects for one or more in or out segments. A single entry can be pointed to by multiple segments indicating resource sharing. | |
| hh3cmplsTrafficParamGroup | 1.3.6.1.4.1.25506.8.12.1.3.1.9 | Object(s) required for supporting QoS resource reservation. | ||
| I32 hh3cmplsTrafficParamIndex | 1.3.6.1.4.1.25506.8.12.1.1.14.1.1 | Integer32 | not-accessible | Uniquely identifies this row of the table. Note that zero represents an invalid index. |
| I32 hh3cmplsTrafficParamIndexNext | 1.3.6.1.4.1.25506.8.12.1.1.13 | Integer32 | read-only | This object contains an appropriate value which will be used for hh3cmplsTrafficParamIndex when creating entries in the hh3cmplsTrafficParamTable. The value 0 indicates that no unassigned entries are available. To obtain the hh3cmplsTrafficParamIndex value for a new entry, the manager issues a management protocol retrieval operation to obtain the current value of this object. After each retrieval operation, the agent should modify the value to reflect the next unassigned index. After a manager retrieves a value the agent will determine through its local policy when this index value will be made available for reuse. |
| HH3 hh3cmplsTrafficParamMaxBurstSize | 1.3.6.1.4.1.25506.8.12.1.1.14.1.4 | Hh3cMplsBurstSize | read-create | Maximum burst size in bytes. |
| HH3 hh3cmplsTrafficParamMaxRate | 1.3.6.1.4.1.25506.8.12.1.1.14.1.2 | Hh3cMplsBitRate | read-create | Maximum rate in kilobits/second. |
| HH3 hh3cmplsTrafficParamMeanRate | 1.3.6.1.4.1.25506.8.12.1.1.14.1.3 | Hh3cMplsBitRate | read-create | Mean rate in kilobits/second. |
| ROW hh3cmplsTrafficParamRowStatus | 1.3.6.1.4.1.25506.8.12.1.1.14.1.5 | RowStatus | read-create | For creating, modifying, and deleting this row. |
| STO hh3cmplsTrafficParamStorageType | 1.3.6.1.4.1.25506.8.12.1.1.14.1.6 | StorageType | read-create | The storage type for this object. |
| hh3cmplsTrafficParamTable | 1.3.6.1.4.1.25506.8.12.1.1.14 | not-accessible | This table specifies the Traffic Parameter objects for in and out-segments. | |
| INT hh3cmplsXCAdminStatus | 1.3.6.1.4.1.25506.8.12.1.1.9.1.8 | INTEGER | read-create | The desired operational status of this segment. |
| NTF hh3cmplsXCDown | 1.3.6.1.4.1.25506.8.12.1.2.0.2 | This notification is generated when a hh3cmplsXCOperStatus object for one of the configured cross-connect entries is about to enter the down state from some other state (but not from the notPresent state). This other state is indicated by the included value of hh3cmplsXCOperStatus. | ||
| hh3cmplsXCEntry | 1.3.6.1.4.1.25506.8.12.1.1.9.1 | not-accessible | A row in this table represents one cross-connect entry. The following objects index it: - cross-connect index hh3cmplsXCIndex that uniquely identifies a group of cross-connect entries - interface index of the in-segment, hh3cmplsInSegmentIfIndex - incoming label(s), hh3cmplsInSegmentLabel - out-segment index, hh3cmplsOutSegmentIndex Originating LSPs: These are represented by using the special combination of values hh3cmplsInSegmentIfIndex=0 and hh3cmplsInSegmentLabel=0 as indexes. In this case the hh3cmplsOutSegmentIndex MUST be non-zero. Terminating LSPs: These are represented by using the special value hh3cmplsOutSegmentIndex=0 as index. Special labels: Entries indexed by reserved MPLS label values 0 through 15 imply terminating LSPs and MUST have hh3cmplsOutSegmentIfIndex = 0. Note that situations where LSPs are terminated with incoming label equal to 0, should have hh3cmplsInSegmentIfIndex = 0 as well, but can be distinguished from originating LSPs because the hh3cmplsOutSegmentIfIndex = 0. The hh3cmplsOutSegmentIfIndex MUST only be set to 0 in cases of terminating LSPs. An entry can be created by a network administrator or by an SNMP agent as instructed by an MPLS signaling protocol. | |
| hh3cmplsXCGroup | 1.3.6.1.4.1.25506.8.12.1.3.1.4 | Collection of objects needed to implement a cross-connect entry. | ||
| I32 hh3cmplsXCIndex | 1.3.6.1.4.1.25506.8.12.1.1.9.1.1 | Integer32 | accessible-for-notify | Primary index for the conceptual row identifying a group of cross-connect segments. |
| I32 hh3cmplsXCIndexNext | 1.3.6.1.4.1.25506.8.12.1.1.8 | Integer32 | read-only | This object contains an appropriate value to be used for hh3cmplsXCIndex when creating entries in the hh3cmplsXCTable. The value 0 indicates that no unassigned entries are available. To obtain the value of hh3cmplsXCIndex for a new entry in the hh3cmplsXCTable, the manager issues a management protocol retrieval operation to obtain the current value of hh3cmplsXCIndex. After each retrieval operation, the agent should modify the value to reflect the next unassigned index. After a manager retrieves a value the agent will determine through its local policy when this index value will be made available for reuse. |
| hh3cmplsXCIsNotPersistentGroup | 1.3.6.1.4.1.25506.8.12.1.3.1.11 | Objects needed to support non-persistent cross- connects. | ||
| T/F hh3cmplsXCIsPersistent | 1.3.6.1.4.1.25506.8.12.1.1.9.1.4 | TruthValue | read-create | Denotes whether or not this cross-connect entry and associated in- and out-segments should be restored automatically after failures. This value MUST be set to false in cases where this cross-connect entry was created by a signaling protocol. |
| hh3cmplsXCIsPersistentGroup | 1.3.6.1.4.1.25506.8.12.1.3.1.10 | Objects needed to support persistent cross- connects. | ||
| I32 hh3cmplsXCLabelStackIndex | 1.3.6.1.4.1.25506.8.12.1.1.9.1.3 | Integer32 | read-create | Primary index into hh3cmplsLabelStackTable identifying a stack of labels to be pushed beneath the top label. Note that the top label identified by the out- segment ensures that all the components of a multipoint-to-point connection have the same outgoing label. A value of 0 indicates that no labels are to be stacked beneath the top label. |
| HH3 hh3cmplsXCLspId | 1.3.6.1.4.1.25506.8.12.1.1.9.1.2 | Hh3cMplsLSPID | read-create | This value identifies the label switched path that this cross-connect entry belongs to. |
| INT hh3cmplsXCOperStatus | 1.3.6.1.4.1.25506.8.12.1.1.9.1.9 | INTEGER | read-only | The actual operational status of this cross- connect. |
| hh3cmplsXCOptionalGroup | 1.3.6.1.4.1.25506.8.12.1.3.1.5 | Collection of optional objects for implementing a cross-connect entry. | ||
| HH3 hh3cmplsXCOwner | 1.3.6.1.4.1.25506.8.12.1.1.9.1.5 | Hh3cMplsObjectOwner | read-create | Denotes the entity that created and is responsible for managing this cross-connect. |
| ROW hh3cmplsXCRowStatus | 1.3.6.1.4.1.25506.8.12.1.1.9.1.6 | RowStatus | read-create | For creating, modifying, and deleting this row. |
| STO hh3cmplsXCStorageType | 1.3.6.1.4.1.25506.8.12.1.1.9.1.7 | StorageType | read-create | Defines the storage type for this object. |
| hh3cmplsXCTable | 1.3.6.1.4.1.25506.8.12.1.1.9 | not-accessible | This table specifies information for switching between LSP segments. It supports point-to-point, point-to-multipoint and multipoint-to-point connections. hh3cmplsLabelStackTable specifies the label stack information for a cross-connect LSR and is referred to from hh3cmplsXCTable. | |
| T/F hh3cmplsXCTrapEnable | 1.3.6.1.4.1.25506.8.12.1.1.15 | TruthValue | read-write | If this object is true, then it enables the generation of hh3cmplsXCUp and hh3cmplsXCDown traps, otherwise these traps are not emitted. |
| NTF hh3cmplsXCUp | 1.3.6.1.4.1.25506.8.12.1.2.0.1 | This notification is generated when a hh3cmplsXCOperStatus object for one of the configured cross-connect entries is about to leave the down state and transition into some other state (but not into the notPresent state). This other state is indicated by the included value of hh3cmplsXCOperStatus. |
RFC description
H3C MPLS Label Switching Router MIB; vendor-private management of MPLS forwarding, label distribution, and LSP provisioning.
Start monitoring H3C/HPE MPLS-capable router/switch (Label Switching Router interfaces) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.