All MIBs › A3COM-HUAWEI-MPLS-LDP-MIB
Organization: HuaweiMPLS Working Group
Last Updated: 1999-06-30
Category: MPLS and Traffic Engineering, Vendor: H3C/HH3C
Description: Manages the MPLS Label Distribution Protocol (LDP) on H3C/3Com devices, including LDP session state, label bindings, and FEC-to-label mappings.
Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.
What Is A3COM-HUAWEI-MPLS-LDP-MIB?
A3COM-HUAWEI-MPLS-LDP-MIB is a vendor MIB, derived from the early IETF MPLS LDP MIB draft, that manages the Label Distribution Protocol on Huawei-based routing platforms (the module is entirely authored under the hwMpls/hwMplsLdp object tree, reflecting the joint Huawei-3Com naming used for this product line rather than any distinct 3Com-specific content). It models the LDP LSR through hwMplsLdpLsrIncarnTable (loop detection/prevention, label retention mode, hop-count limit), per-interface LDP instances via hwMplsLdpEntityTable and hwMplsLdpEntityIfTable, discovered neighbors in hwMplsLdpPeerTable (peer address, keepalive timer, label distribution method), and session-establishment counters in hwMplsLdpEntityStatsTable such as hwMplsLdpAttemptedSessions. It exposes both configuration state (label ranges, retention policy, timers) and operational counters, making it useful for diagnosing why LDP sessions to a neighbor fail to establish or why label bindings are not being learned as expected. It depends on the underlying MPLS forwarding infrastructure that LDP-distributed labels ultimately populate, and is deployed on Huawei/H3C routers acting as LSRs in an MPLS network. Network engineers troubleshooting LDP adjacencies on these platforms can download the A3COM-HUAWEI-MPLS-LDP-MIB file for their MIB browser.
IPNetwork Monitor allows you to monitor SNMP objects defined in A3COM-HUAWEI-MPLS-LDP-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.
Supported Devices
- Huawei/H3C MPLS-capable routers (LSRs)
Monitoring Examples
An operator polls hwMplsLdpPeerTable to confirm a peer's hwMplsLdpPeerID and hwMplsLdpPeerKeepAliveHoldTimer are as expected, then checks hwMplsLdpAttemptedSessions in hwMplsLdpEntityStatsTable; a rising attempted-session count with no corresponding entry appearing in the peer table indicates the LDP session to that neighbor is repeatedly failing to establish.
What Can Be Monitored
- LDP session attempt/establishment counters
- discovered peer table entries and keepalive timers
- label retention mode and loop detection/prevention settings
- per-interface LDP entity configuration
- ATM label range allocation for entities and peers
This MIB depends on
Related MIBs
Imported Objects
From A3COM-HUAWEI-OID-MIB
| huaweiMgmt | OBJECT-IDENTITY |
| hwMpls | OBJECT-IDENTITY |
From SNMPv2-CONF
| MODULE-COMPLIANCE | |
| NOTIFICATION-GROUP | |
| OBJECT-GROUP |
From SNMPv2-SMI
| Counter32 | |
| Integer32 | |
| IpAddress | |
| MODULE-IDENTITY | |
| NOTIFICATION-TYPE | |
| OBJECT-TYPE | |
| Unsigned32 |
From SNMPv2-TC
| RowStatus | |
| TEXTUAL-CONVENTION | |
| TimeInterval | |
| TruthValue |
How to Use in IPNetwork Monitor
Example using hwMplsLdpAttemptedSessions OID:
Select a Huawei/H3C MPLS router as the target host to create a monitor — the SNMP service should be up and running on it. Click New Monitor, then check SNMP Custom on the Favorites tab, click Next, and confirm the host. On the next page, click Select... to open the built-in SNMP MIB Browser and type hwMplsLdpAttemptedSessions into the Find box to locate it in the OID tree, selecting the specific row/instance you want to monitor since this is a table column, then select it and click OK. It reports a count of the total attempted sessions for this LDP Entity. On the monitor's Main parameters page you can set the target's SNMP port (default 161), credentials, polling interval, and other settings — see the SNMP Monitor help for details. On the State conditions and Alerting tabs, configure when the monitor should change state and trigger an alert; since this is a Counter32-type OID, Value bounds is the most useful condition here — trigger an alert if the counter increases sharply between polls relative to its normal baseline, since an unexpected spike often reflects a real change in traffic or activity. Click Finish to create the monitor; you can adjust any parameter later.
OIDs
| OID symbolic | OID numeric | Type | Access | Description |
|---|---|---|---|---|
| hwMplsLdp | 1.3.6.1.4.1.43.45.1.5.12.2 | All rights reserved | ||
| C32 hwMplsLdpAttemptedSessionsEx | 1.3.6.1.4.1.43.45.1.5.12.2.1.2.4.1.1 | Counter32 | read-only | A count of the total attempted sessions for this LDP Entity. |
| INT hwMplsLdpCrlspErHopAddrType | 1.3.6.1.4.1.43.45.1.5.12.2.1.6.2.1.2 | INTEGER | read-create | Address type of this hop. |
| hwMplsLdpCrlspErHopEntry | 1.3.6.1.4.1.43.45.1.5.12.2.1.6.2.1 | not-accessible | An entry in this table represents a tunnel hop. An entry is created by a network administrator for signalled ERLSP set up by LDP or RSVP. | |
| INT hwMplsLdpCrlspErHopIndex | 1.3.6.1.4.1.43.45.1.5.12.2.1.6.2.1.1 | INTEGER | not-accessible | Secondary index into this table identifying the particular hop. |
| IP hwMplsLdpCrlspErHopIpv4Addr | 1.3.6.1.4.1.43.45.1.5.12.2.1.6.2.1.3 | IpAddress | read-create | If hwMplsLdpCrlspErHopAddrType is ipV4(1), IPv4 address of this hop. This object is not significant otherwise and should return a value of 0. |
| INT hwMplsLdpCrlspErHopIpv4PrefixLen | 1.3.6.1.4.1.43.45.1.5.12.2.1.6.2.1.4 | INTEGER | read-create | If hwMplsLdpCrlspErHopAddrType is ipV4(1), prefix length for this hop's IPv4 address. This object is not significant otherwise and should return a value of 0. |
| ROW hwMplsLdpCrlspErHopRowStatus | 1.3.6.1.4.1.43.45.1.5.12.2.1.6.2.1.6 | RowStatus | read-create | For creating, modifying and deleting this row. |
| INT hwMplsLdpCrlspErHopStrictOrLoose | 1.3.6.1.4.1.43.45.1.5.12.2.1.6.2.1.5 | INTEGER | read-create | Whether this is a strict or loose hop. |
| hwMplsLdpCrlspErHopTable | 1.3.6.1.4.1.43.45.1.5.12.2.1.6.2 | not-accessible | The hwMplsLdpCrlspErHopTable is used to indicate the hops, strict or loose, for an MPLS CRLSP tunnel defined in hwMplsLdpCrlspTnlTable. There must be atleast one entry in this table for each CRLSP tunnel that is supported in the hwMplsLdpCrlspTnlTable. The first row in the table is the first hop after the origination point of the tunnel. | |
| BUR hwMplsLdpCrlspTnlCommittedBurstSize | 1.3.6.1.4.1.43.45.1.5.12.2.1.6.1.1.10 | BurstSize | read-create | The committed burst size - the committed burst size of the traffic that will be handled in the established CRLSP. |
| BIT hwMplsLdpCrlspTnlCommittedDataRate | 1.3.6.1.4.1.43.45.1.5.12.2.1.6.1.1.9 | BitRate | read-create | The committed rate - the committed rate at which traffic will be sent on the CRLSP. |
| INT hwMplsLdpCrlspTnlDirection | 1.3.6.1.4.1.43.45.1.5.12.2.1.6.1.1.3 | INTEGER | read-create | Whether this tunnel is unidirectional-incoming, unidirectional-outgoing, or bidirectional. |
| hwMplsLdpCrlspTnlEntry | 1.3.6.1.4.1.43.45.1.5.12.2.1.6.1.1 | not-accessible | An entry in this table represents an CRLSP MPLS tunnel. An entry can be created by a network administrator. | |
| BUR hwMplsLdpCrlspTnlExcessBurstSize | 1.3.6.1.4.1.43.45.1.5.12.2.1.6.1.1.11 | BurstSize | read-create | The Excess burst size - the excess burst size limit to be used for traffic conditioning at the ingress of the CRLSP. |
| INT hwMplsLdpCrlspTnlFrequency | 1.3.6.1.4.1.43.45.1.5.12.2.1.6.1.1.13 | INTEGER | read-create | Indicates the frequency of usage of the established CRLSP. |
| INT hwMplsLdpCrlspTnlHoldingPrio | 1.3.6.1.4.1.43.45.1.5.12.2.1.6.1.1.6 | INTEGER | read-create | The holding priority for this tunnel. |
| MPL hwMplsLdpCrlspTnlIndex | 1.3.6.1.4.1.43.45.1.5.12.2.1.6.1.1.1 | MplsTunnelIndex | accessible-for-notify | Uniquely identifies this row. |
| T/F hwMplsLdpCrlspTnlIsPinned | 1.3.6.1.4.1.43.45.1.5.12.2.1.6.1.1.12 | TruthValue | read-create | Indicates whether the loose-routed hops of this tunnel are to be pinned. |
| STR hwMplsLdpCrlspTnlName | 1.3.6.1.4.1.43.45.1.5.12.2.1.6.1.1.2 | DisplayString | read-create | The 'canonical' name assigned to the tunnel that can be used to refer to it on the 'console' port. |
| hwMplsLdpCrlspTnlObjects | 1.3.6.1.4.1.43.45.1.5.12.2.1.6 | |||
| BUR hwMplsLdpCrlspTnlPeakBurstSize | 1.3.6.1.4.1.43.45.1.5.12.2.1.6.1.1.8 | BurstSize | read-create | The peak burst size - the maximum burst size of the traffic that can occur in the established CRLSP. |
| BIT hwMplsLdpCrlspTnlPeakDataRate | 1.3.6.1.4.1.43.45.1.5.12.2.1.6.1.1.7 | BitRate | read-create | The peak rate - the maximum rate at which traffic will be sent on the CRLSP. |
| ROW hwMplsLdpCrlspTnlRowStatus | 1.3.6.1.4.1.43.45.1.5.12.2.1.6.1.1.15 | RowStatus | read-create | For controlling the state of this row. The status can be set to 'active' only when atleast one ERHOP is created in the hwMplsLdpErHopTable, associated with this tunnel. |
| INT hwMplsLdpCrlspTnlSetupPrio | 1.3.6.1.4.1.43.45.1.5.12.2.1.6.1.1.5 | INTEGER | read-create | The setup priority of this tunnel. |
| INT hwMplsLdpCrlspTnlSignallingProto | 1.3.6.1.4.1.43.45.1.5.12.2.1.6.1.1.4 | INTEGER | read-create | The signaling protocol, if any, that set up this tunnel. |
| hwMplsLdpCrlspTnlTable | 1.3.6.1.4.1.43.45.1.5.12.2.1.6.1 | not-accessible | The hwMplsLdpCrlspTnlTable allows new CRLSP MPLS tunnels to be created. The ER hops associated with a CRLSP tunnel are to be configured using the hwMplsLdpCrlspErHopTable. | |
| INT hwMplsLdpCrlspTnlWeight | 1.3.6.1.4.1.43.45.1.5.12.2.1.6.1.1.14 | INTEGER | read-create | Indicates the weight that is the established CRLSP. |
| NTF hwMplsLdpCrlspTunnelDown | 1.3.6.1.4.1.43.45.1.5.12.2.2.0.3 | This notification is generated when a CRLSP Row status is modified to destroy the CRLSP tunnel. - due to pre-emption etc., | ||
| NTF hwMplsLdpCrlspTunnelSetupFailure | 1.3.6.1.4.1.43.45.1.5.12.2.2.0.4 | This notification is generated by the Ingress LSR of the CRLSP tunnel on the receipt of Nak message from the downstream LSR for the Label request sent for the CRLSP tunnel. This can occur due to improper ER hop values being set, or Traffic resources not available etc., | ||
| NTF hwMplsLdpCrlspTunnelUp | 1.3.6.1.4.1.43.45.1.5.12.2.2.0.2 | This notification is generated by the Ingress LSR of the CRLSP tunnel on the receipt of Label mapping message from the downstream LSR for the LAbel request sent for the CRLSP tunnel. | ||
| hwMplsLdpEntityConfAtmLabelRangeEntry | 1.3.6.1.4.1.43.45.1.5.12.2.1.2.3.1 | not-accessible | A row in the LDP Entity Configurable ATM Label Range Table. One entry in this table contains information on a single range of labels represented by the configured Upper and Lower Bounds VPI/VCI pairs. NOTE: The ranges for a specific LDP Entity are UNIQUE and non-overlapping. For example, for a specific LDP Entity index, there could be one entry having ConfLowerBound vpi/vci == 0/32, and ConfUpperBound vpi/vci == 0/100, and a second entry for this same interface with ConfLowerBound vpi/vci == 0/101 and ConfUpperBound vpi/vci == 0/200. However, there could not be a third entry with ConfLowerBound vpi/vci == 0/200 and ConfUpperBound vpi/vci == 0/300 because this label range overlaps with the second entry (i.e. both entries now have 0/200). A row will not be created unless a unique and non-overlapping range is specified. Thus, row creation implies a one-shot row creation of LDP EntityID and ConfLowerBound vpi/vci and ConfUpperBound vpi/vci. At least one label range entry for a specific LDP Entity MUST include the default VPI/VCI values denoted in the LDP Entity Table. | |
| OID hwMplsLdpEntityConfAtmLabelRangeLowerBoundVCI | 1.3.6.1.4.1.43.45.1.5.12.2.1.2.3.1.2 | AtmVcIdentifier | not-accessible | The minimum VCI number configured for this range. |
| OID hwMplsLdpEntityConfAtmLabelRangeLowerBoundVPI | 1.3.6.1.4.1.43.45.1.5.12.2.1.2.3.1.1 | AtmVpIdentifier | not-accessible | The minimum VPI number configured for this range. |
| ROW hwMplsLdpEntityConfAtmLabelRangeRowStatus | 1.3.6.1.4.1.43.45.1.5.12.2.1.2.3.1.5 | RowStatus | read-create | An object that allows entries in this table to be created and deleted using the RowStatus convention. |
| hwMplsLdpEntityConfAtmLabelRangeTable | 1.3.6.1.4.1.43.45.1.5.12.2.1.2.3 | not-accessible | The MPLS LDP Entity Configurable ATM Label Range Table. The purpose of this table is to provide a mechanism for specifying a contiguous range of vpi's with a contiguous range of vci's, or a 'label range' for LDP Entities. LDP Entities which use ATM must have at least one entry in this table. | |
| OID hwMplsLdpEntityConfAtmLabelRangeUpperBoundVCI | 1.3.6.1.4.1.43.45.1.5.12.2.1.2.3.1.4 | AtmVcIdentifier | read-create | The maximum VCI number configured for this range. |
| OID hwMplsLdpEntityConfAtmLabelRangeUpperBoundVPI | 1.3.6.1.4.1.43.45.1.5.12.2.1.2.3.1.3 | AtmVpIdentifier | read-create | The maximum VPI number configured for this range. |
| OID hwMplsLdpEntityDefVci | 1.3.6.1.4.1.43.45.1.5.12.2.1.2.1.1.4 | AtmVcIdentifier | read-create | The Default VCI value used in the label for the default VCI. |
| OID hwMplsLdpEntityDefVpi | 1.3.6.1.4.1.43.45.1.5.12.2.1.2.1.1.3 | AtmVpIdentifier | read-create | The Default VPI value used in the label for the default VPI. |
| NTF hwMplsLdpEntityDownEventFailure | 1.3.6.1.4.1.43.45.1.5.12.2.2.0.14 | This notification is generated by LDP to notify the ENTITY DOWN Event failure | ||
| hwMplsLdpEntityEntry | 1.3.6.1.4.1.43.45.1.5.12.2.1.2.1.1 | not-accessible | An entry in this table represents an LDP entity. An entry can be created by a network administrator or by an SNMP agent as instructed by LDP. An LPD Entity is uniquely indexed by its LPD Identifier. | |
| INT hwMplsLdpEntityFailedInitSessionThreshold | 1.3.6.1.4.1.43.45.1.5.12.2.1.2.1.1.12 | INTEGER | read-create | When attempting to establish a session with a given Peer, the given LDP Entity should send out a notification when exceeding this threshold. A value of 0 (zero) for this object indicates that the threshold is infinity. In other words, a notification will not be sent if the value of this object is 0 (zero). |
| INT hwMplsLdpEntityHelloHoldTimer | 1.3.6.1.4.1.43.45.1.5.12.2.1.2.1.1.15 | INTEGER | read-create | The two octet value which is the proposed hello hold timer for this LDP Entity. |
| OID hwMplsLdpEntityID | 1.3.6.1.4.1.43.45.1.5.12.2.1.2.1.1.1 | MplsLdpIdentifier | accessible-for-notify | The LDP identifier which uniquely identifies the LDP Entity. This is s six octet quantity which is used to identify an Label Switch Router (LSR) label space. The first four octets encode an IP address assigned to the LSR, and the last two octets identify a specific label space within the LSR. |
| hwMplsLdpEntityIfEntry | 1.3.6.1.4.1.43.45.1.5.12.2.1.2.2.1 | not-accessible | An entry in this table represents an Interface that is associated with a LDP entity. An entry can be created by a network administrator or by an SNMP agent as instructed by LDP. An interface (row in this table) can be created/deleted only when the associted LDP Entity row status has the value notInService or notReady. | |
| U32 hwMplsLdpEntityIfIndex | 1.3.6.1.4.1.43.45.1.5.12.2.1.2.2.1.1 | Unsigned32 | not-accessible | Identifier that uniquely identifies the Interface with respect to an LDP Entity. The ifIndex value corresponds to the IfIndex value of the MIB-II |
| IP hwMplsLdpEntityIfIpv4Address | 1.3.6.1.4.1.43.45.1.5.12.2.1.2.2.1.2 | IpAddress | read-create | The IPv4 address associated with the interface. |
| ROW hwMplsLdpEntityIfRowStatus | 1.3.6.1.4.1.43.45.1.5.12.2.1.2.2.1.3 | RowStatus | read-create | An object that allows entries in this table to be created and deleted using the RowStatus convention. |
| hwMplsLdpEntityIfTable | 1.3.6.1.4.1.43.45.1.5.12.2.1.2.2 | not-accessible | This table contains information about the interfaces that are associated with an LDP Entity. There should be atleast one interface associated with each LDP Entity. If the LDP Entity supports 'per interface based label space' label type then, atmost one interface can be associated with the LDP entity. If the LDP Entity supports 'per platform based label space' label type then, more than one interface can be associated with the LDP Entity. | |
| INT hwMplsLdpEntityKeepAliveHoldTimer | 1.3.6.1.4.1.43.45.1.5.12.2.1.2.1.1.11 | INTEGER | read-create | The two octet value which is the proposed keep alive hold timer for this LDP Entity. |
| INT hwMplsLdpEntityLabelAllocationMethod | 1.3.6.1.4.1.43.45.1.5.12.2.1.2.1.1.14 | INTEGER | read-create | For any given LDP session, the method of label allocation must be specified. Label can be allocated in either ordered mode or in the independent mode. |
| INT hwMplsLdpEntityLabelDistributionMethod | 1.3.6.1.4.1.43.45.1.5.12.2.1.2.1.1.13 | INTEGER | read-create | For any given LDP session, the method of label distribution must be specified. Current release of HuaweiMPLS does not provide support for 'downstreamUnsolicited'. |
| INT hwMplsLdpEntityLabelSpaceType | 1.3.6.1.4.1.43.45.1.5.12.2.1.2.1.1.2 | INTEGER | read-create | The type of label spaces associated with this LDP Entity. The values are 'unknown(1)' The type of label space is not known. 'perInterface(2)' The type of label space is tied to an interface. 'perPlatform(3)' The type of label space is tied to the platform. |
| INT hwMplsLdpEntityMergeCapability | 1.3.6.1.4.1.43.45.1.5.12.2.1.2.1.1.7 | INTEGER | read-create | Sets the merge capability for this LDP entity. Current Release of HuaweiMPLS does not provide support for any kind of Merge. |
| INT hwMplsLdpEntityMtu | 1.3.6.1.4.1.43.45.1.5.12.2.1.2.1.1.10 | INTEGER | read-create | The maximum transmission unit (MTU) that was configured for this entity. |
| hwMplsLdpEntityObjects | 1.3.6.1.4.1.43.45.1.5.12.2.1.2 | |||
| ROW hwMplsLdpEntityRowStatus | 1.3.6.1.4.1.43.45.1.5.12.2.1.2.1.1.16 | RowStatus | read-create | An object that allows entries in this table to be created and deleted using the RowStatus convention. |
| hwMplsLdpEntityStatsEntry | 1.3.6.1.4.1.43.45.1.5.12.2.1.2.4.1 | not-accessible | A row in this table contains statistical information about an LDP Entity. | |
| hwMplsLdpEntityStatsTable | 1.3.6.1.4.1.43.45.1.5.12.2.1.2.4 | not-accessible | This table is a read-only table which augments the MplsLdpConfEntityTable. The purpose of this table is to keep statistical information about the LDP Entities on the LSR. | |
| hwMplsLdpEntityTable | 1.3.6.1.4.1.43.45.1.5.12.2.1.2.1 | not-accessible | This table contains information about the MPLS Label Distribution Protocol Entities which exist on this Label Switch Router (LSR). | |
| OID hwMplsLdpEntityUnlabTrafVci | 1.3.6.1.4.1.43.45.1.5.12.2.1.2.1.1.6 | AtmVcIdentifier | read-create | VCI value of the VCC supporting unlabeled traffic. |
| OID hwMplsLdpEntityUnlabTrafVpi | 1.3.6.1.4.1.43.45.1.5.12.2.1.2.1.1.5 | AtmVpIdentifier | read-create | VPI value of the VCC supporting unlabeled traffic. |
| NTF hwMplsLdpEntityUpEventFailure | 1.3.6.1.4.1.43.45.1.5.12.2.2.0.13 | This notification is generated by LDP to notify the ENTITY UP Event failure | ||
| INT hwMplsLdpEntityVcDirectionality | 1.3.6.1.4.1.43.45.1.5.12.2.1.2.1.1.8 | INTEGER | read-create | Sets the VC directionality for this LDP entity. |
| INT hwMplsLdpEntityWellKnownDiscoveryPort | 1.3.6.1.4.1.43.45.1.5.12.2.1.2.1.1.9 | INTEGER | read-create | The well known LDP Discovery Port. |
| NTF hwMplsLdpFailedInitSessionThresholdExceeded | 1.3.6.1.4.1.43.45.1.5.12.2.2.0.1 | This notification is generated whenever the value of hwMplsLdpEntityFailedInitSessionThreshold is exceeded. | ||
| hwMplsLdpHelloAdjacencyEntry | 1.3.6.1.4.1.43.45.1.5.12.2.1.5.1.1 | not-accessible | Each row represents a single LDP Hello Adjacency. An LDP Session can have one or more Hello adjacencies. | |
| NUM hwMplsLdpHelloAdjacencyHoldTimeRemaining | 1.3.6.1.4.1.43.45.1.5.12.2.1.5.1.1.2 | TimeInterval | read-only | The time remaining for this Hello Adjacency. |
| U32 hwMplsLdpHelloAdjacencyIndex | 1.3.6.1.4.1.43.45.1.5.12.2.1.5.1.1.1 | Unsigned32 | not-accessible | An identifier for the adjacency. |
| hwMplsLdpHelloAdjacencyObjects | 1.3.6.1.4.1.43.45.1.5.12.2.1.5 | |||
| hwMplsLdpHelloAdjacencyTable | 1.3.6.1.4.1.43.45.1.5.12.2.1.5.1 | not-accessible | A table of Hello Adjacencies for Sessions. | |
| NTF hwMplsLdpIncarnDownEventFailure | 1.3.6.1.4.1.43.45.1.5.12.2.2.0.12 | This notification is generated by LDP to notify the Incarnation DOWN Event failure | ||
| NTF hwMplsLdpIncarnUpEventFailure | 1.3.6.1.4.1.43.45.1.5.12.2.2.0.11 | This notification is generated by LDP to notify the Incarnation UP Event failure | ||
| INT hwMplsLdpLsrHopCountLimit | 1.3.6.1.4.1.43.45.1.5.12.2.1.1.1.1.5 | INTEGER | read-write | This object only has meaning if hwMplsLdpLsrLoopDetectionPresent has the value of 'true'. The value of this object represents the limit on the Hop Count which this LSR uses to treat the message as if it had traversed a loop. |
| OID hwMplsLdpLsrID | 1.3.6.1.4.1.43.45.1.5.12.2.1.1.1.1.1 | MplsLsrIdentifier | read-write | The LSR's Identifier. |
| hwMplsLdpLsrIncarnEntry | 1.3.6.1.4.1.43.45.1.5.12.2.1.1.1.1 | not-accessible | An entry in this table represents an LSR incarnation. All the entries in this table are created initially when the LDP is initiated. The row status of each entry will be in 'notInService' state initially. The row status must be set to 'active' after the necessary configurations are complete with respect to an incarnation. Currenlty the LSR ID of the incarnation is the only mandatory parameter that must be set before the rowStatus is set to 'active'. An LSR Incarnation Entity is uniquely indexed by its Incarnation Identifier. | |
| INT hwMplsLdpLsrIncarnID | 1.3.6.1.4.1.43.45.1.5.12.2.1.1.1.1.9 | INTEGER | read-only | The incarnation acts as index to all the elements in this table. |
| hwMplsLdpLsrIncarnTable | 1.3.6.1.4.1.43.45.1.5.12.2.1.1.1 | not-accessible | HuaweiMPLS provides support for multiple incarnations of the MPLS Stack in a target. The LSR defined in the standard MIB is treated as an incarnation in this MIB. Using a local policy the Network administrator must group the LDP Entities that should be placed in an incarnation. | |
| INT hwMplsLdpLsrLabelRetentionMode | 1.3.6.1.4.1.43.45.1.5.12.2.1.1.1.1.8 | INTEGER | read-write | The LSR can be configured to use either conservative or liberal label retention mode. If the value of this object is conservative(1) then advertized label mappings are retained only if they will be used to forward packets, i.e. if label came from a valid next hop. If the value of this object is liberal(2) then all advertized label mappings are retained whether they are from a valid next hop or not. Current release of HuaweiMPLS does not provide support to assign this MIB object with a value 'liberal'. |
| INT hwMplsLdpLsrLoopDetectionAdminStatus | 1.3.6.1.4.1.43.45.1.5.12.2.1.1.1.1.3 | INTEGER | read-write | To enable loop detection the value of this object should be 'enabled(1)'. Otherwise, to turn off loop detection, set this value to 'disabled(2)'. |
| T/F hwMplsLdpLsrLoopDetectionPresent | 1.3.6.1.4.1.43.45.1.5.12.2.1.1.1.1.2 | TruthValue | read-only | A indication of whether this LSR supports loop detection. A value of 'true' indicates this LSR does support loop detection. A value of 'false' indicates this LSR does not support loop detection. |
| INT hwMplsLdpLsrLoopPreventionAdminStatus | 1.3.6.1.4.1.43.45.1.5.12.2.1.1.1.1.7 | INTEGER | read-write | To enable loop prevention the value of this object should be 'enabled(1)'. Otherwise, to turn off loop prevention, set this value to 'disabled(2)'. Current release of HuaweiMPLS does not provide support to assign this MIB object with a value 'enabled'. |
| T/F hwMplsLdpLsrLoopPreventionPresent | 1.3.6.1.4.1.43.45.1.5.12.2.1.1.1.1.6 | TruthValue | read-only | A indication of whether this LSR supports loop prevention. A value of 'true' indicates this LSR does support loop prevention. A value of 'false' indicates this LSR does not support loop prevention. Current release of HuaweiMPLS does not provide support to assign this MIB object with a value 'true'. |
| INT hwMplsLdpLsrMaxCrlspTnls | 1.3.6.1.4.1.43.45.1.5.12.2.1.1.1.1.15 | INTEGER | read-write | The maximum number of CRLSPs that can be supported by this Incarnation. |
| INT hwMplsLdpLsrMaxErhopPerCrlspTnl | 1.3.6.1.4.1.43.45.1.5.12.2.1.1.1.1.16 | INTEGER | read-write | The maximum number of ER-Hops that can be supported in a CRLSP tunnel. |
| INT hwMplsLdpLsrMaxIfaces | 1.3.6.1.4.1.43.45.1.5.12.2.1.1.1.1.13 | INTEGER | read-write | The maximum number of Label enabled Interfaces that can be supported by this Incarnation. |
| INT hwMplsLdpLsrMaxLdpEntities | 1.3.6.1.4.1.43.45.1.5.12.2.1.1.1.1.10 | INTEGER | read-write | The maximum number of LDP entities that can be supported by this Incarnation. |
| INT hwMplsLdpLsrMaxLocalPeers | 1.3.6.1.4.1.43.45.1.5.12.2.1.1.1.1.11 | INTEGER | read-write | The maximum number of Local LDP peers that can be supported by this Incarnation. |
| INT hwMplsLdpLsrMaxLsps | 1.3.6.1.4.1.43.45.1.5.12.2.1.1.1.1.14 | INTEGER | read-write | The maximum number of Label Switched Paths that can be supported by this Incarnation. |
| INT hwMplsLdpLsrMaxRemotePeers | 1.3.6.1.4.1.43.45.1.5.12.2.1.1.1.1.12 | INTEGER | read-write | The maximum number of Remote LDP peers that can be supported by this Incarnation. |
| INT hwMplsLdpLsrMaxVcmCapability | 1.3.6.1.4.1.43.45.1.5.12.2.1.1.1.1.18 | INTEGER | read-write | |
| INT hwMplsLdpLsrNumOfRequestRetryAttempts | 1.3.6.1.4.1.43.45.1.5.12.2.1.1.1.1.21 | INTEGER | read-write | |
| hwMplsLdpLsrObjects | 1.3.6.1.4.1.43.45.1.5.12.2.1.1 | |||
| INT hwMplsLdpLsrPathVectorLimit | 1.3.6.1.4.1.43.45.1.5.12.2.1.1.1.1.4 | INTEGER | read-write | This object only has meaning if hwMplsLdpLsrLoopDetectionPresent has the value of 'true'. The value of this object represents the limit of path vectors which this LSR uses to treat the message as if it had traversed a loop. |
| INT hwMplsLdpLsrRequestRetrytimerValue | 1.3.6.1.4.1.43.45.1.5.12.2.1.1.1.1.20 | INTEGER | read-write | |
| ROW hwMplsLdpLsrRowStatus | 1.3.6.1.4.1.43.45.1.5.12.2.1.1.1.1.17 | RowStatus | read-create | An object that allows entries in this table to be created and deleted using the RowStatus convention. |
| T/F hwMplsLdpLsrVcmPathVecInAllLblMapPresent | 1.3.6.1.4.1.43.45.1.5.12.2.1.1.1.1.19 | TruthValue | read-write | |
| hwMplsLdpNotificationPrefix | 1.3.6.1.4.1.43.45.1.5.12.2.2.0 | |||
| hwMplsLdpNotifications | 1.3.6.1.4.1.43.45.1.5.12.2.2 | |||
| hwMplsLdpObjects | 1.3.6.1.4.1.43.45.1.5.12.2.1 | |||
| hwMplsLdpPeerConfAtmLabelRangeEntry | 1.3.6.1.4.1.43.45.1.5.12.2.1.3.2.1 | not-accessible | A row in the LDP Peer Configurable ATM Label Range Table. One entry in this table contains information on a single range of labels represented by the configured Upper and Lower Bounds VPI/VCI pairs. NOTE: The ranges for a specific LDP Peer are UNIQUE and non-overlapping. For example, for a specific LDP Peer index, there could be one entry having ConfLowerBound vpi/vci == 0/32, and ConfUpperBound vpi/vci == 0/100, and a second entry for this same interface with ConfLowerBound vpi/vci == 0/101 and ConfUpperBound vpi/vci == 0/200. However, there could not be a third entry with ConfLowerBound vpi/vci == 0/200 and ConfUpperBound vpi/vci == 0/300 because this label range overlaps with the second entry (i.e. both entries now have 0/200). A row will not be created unless a unique and non-overlapping range is specified. Thus, row creation implies a one-shot row creation of LDP PeerIndex and ConfLowerBound vpi/vci and ConfUpperBound vpi/vci. At least one label range entry for a specific LDP Peer MUST include the default VPI/VCI values denoted in the LDP Peer Table. | |
| OID hwMplsLdpPeerConfAtmLabelRangeLowerBoundVCI | 1.3.6.1.4.1.43.45.1.5.12.2.1.3.2.1.2 | AtmVcIdentifier | not-accessible | The minimum VCI number configured for this range. |
| OID hwMplsLdpPeerConfAtmLabelRangeLowerBoundVPI | 1.3.6.1.4.1.43.45.1.5.12.2.1.3.2.1.1 | AtmVpIdentifier | not-accessible | The minimum VPI number configured for this range. |
| hwMplsLdpPeerConfAtmLabelRangeTable | 1.3.6.1.4.1.43.45.1.5.12.2.1.3.2 | not-accessible | The MPLS LDP Peer Configurable ATM Label Range Table. The purpose of this table is to provide a mechanism for specifying a contiguous range of vpi's with a contiguous range of vci's, or a 'label range' for LDP Peers. LDP Peers which use ATM must have at least one entry in this table. | |
| OID hwMplsLdpPeerConfAtmLabelRangeUpperBoundVCI | 1.3.6.1.4.1.43.45.1.5.12.2.1.3.2.1.4 | AtmVcIdentifier | read-only | The maximum VCI number configured for this range. |
| OID hwMplsLdpPeerConfAtmLabelRangeUpperBoundVPI | 1.3.6.1.4.1.43.45.1.5.12.2.1.3.2.1.3 | AtmVpIdentifier | read-only | The maximum VPI number configured for this range. |
| INT hwMplsLdpPeerDefaultMtu | 1.3.6.1.4.1.43.45.1.5.12.2.1.3.1.1.5 | INTEGER | read-create | The default maximum transmission unit (MTU) of the LDP Peer. |
| hwMplsLdpPeerEntry | 1.3.6.1.4.1.43.45.1.5.12.2.1.3.1.1 | not-accessible | Information about a single Peer. | |
| OID hwMplsLdpPeerID | 1.3.6.1.4.1.43.45.1.5.12.2.1.3.1.1.2 | MplsLdpIdentifier | read-create | The LDP identifier of this LDP Peer. |
| U32 hwMplsLdpPeerIndex | 1.3.6.1.4.1.43.45.1.5.12.2.1.3.1.1.1 | Unsigned32 | not-accessible | An identifier for the LDP peer that is unique within the scope of this agent. |
| MPL hwMplsLdpPeerInternetworkAddr | 1.3.6.1.4.1.43.45.1.5.12.2.1.3.1.1.4 | MplsLdpGenAddr | read-create | The value of the internetwork layer address of this LDP peer. |
| ADR hwMplsLdpPeerInternetworkAddrType | 1.3.6.1.4.1.43.45.1.5.12.2.1.3.1.1.3 | AddressFamilyNumbers | read-create | The type of the internetwork layer address of this LDP peer. This object indicates how the value of hwMplsLdpPeerInternetworkAddr is to be interpreted. |
| INT hwMplsLdpPeerKeepAliveHoldTimer | 1.3.6.1.4.1.43.45.1.5.12.2.1.3.1.1.6 | INTEGER | read-create | The two octet unsigned non zero INTEGER that indicates the number of seconds that this Peer proposes for the value of the KeepAlive Interval. |
| INT hwMplsLdpPeerLabelDistributionMethod | 1.3.6.1.4.1.43.45.1.5.12.2.1.3.1.1.7 | INTEGER | read-create | For any given LDP session, the method of label distribution must be specified. |
| hwMplsLdpPeerObjects | 1.3.6.1.4.1.43.45.1.5.12.2.1.3 | |||
| ROW hwMplsLdpPeerRowStatus | 1.3.6.1.4.1.43.45.1.5.12.2.1.3.1.1.9 | RowStatus | read-create | An object that allows entries in this table to be created and deleted using the RowStatus convention. |
| hwMplsLdpPeerTable | 1.3.6.1.4.1.43.45.1.5.12.2.1.3.1 | not-accessible | Information about LDP peers which have been discovered by the LDP Entities that are managed by this agent. | |
| INT hwMplsLdpPeerType | 1.3.6.1.4.1.43.45.1.5.12.2.1.3.1.1.8 | INTEGER | read-create | Indicates whether a peer is a local peer or a remote peer |
| OID hwMplsLdpSessionAtmLabelRangeLowerBoundVCI | 1.3.6.1.4.1.43.45.1.5.12.2.1.4.1.1.8 | AtmVcIdentifier | read-only | The minimum VCI number for this range. |
| OID hwMplsLdpSessionAtmLabelRangeLowerBoundVPI | 1.3.6.1.4.1.43.45.1.5.12.2.1.4.1.1.7 | AtmVpIdentifier | read-only | The minimum VPI number for this range. |
| OID hwMplsLdpSessionAtmLabelRangeUpperBoundVCI | 1.3.6.1.4.1.43.45.1.5.12.2.1.4.1.1.10 | AtmVcIdentifier | read-only | The maximum VCI number for this range. |
| OID hwMplsLdpSessionAtmLabelRangeUpperBoundVPI | 1.3.6.1.4.1.43.45.1.5.12.2.1.4.1.1.9 | AtmVpIdentifier | read-only | The maximum VPI number for this range. |
| NTF hwMplsLdpSessionDownEventFailure | 1.3.6.1.4.1.43.45.1.5.12.2.2.0.16 | Generation of this trap occurs when the value of 'hwMplsLdpSessionState' leaves the 'operational(5)' state. | ||
| hwMplsLdpSessionEntry | 1.3.6.1.4.1.43.45.1.5.12.2.1.4.1.1 | not-accessible | An entry in this table represents information on a single session between an LDP Entity and LDP Peer. | |
| OID hwMplsLdpSessionID | 1.3.6.1.4.1.43.45.1.5.12.2.1.4.1.1.2 | MplsLdpIdentifier | read-only | The LDP Session identifier. |
| U32 hwMplsLdpSessionIndex | 1.3.6.1.4.1.43.45.1.5.12.2.1.4.1.1.1 | Unsigned32 | not-accessible | An unique identifier for this entry such that it identifies a specific LDP Session. |
| NUM hwMplsLdpSessionKeepAliveHoldTimeRemaining | 1.3.6.1.4.1.43.45.1.5.12.2.1.4.1.1.4 | TimeInterval | read-only | The keep alive hold time remaining for this session. |
| hwMplsLdpSessionObjects | 1.3.6.1.4.1.43.45.1.5.12.2.1.4 | |||
| INT hwMplsLdpSessionProtocolVersion | 1.3.6.1.4.1.43.45.1.5.12.2.1.4.1.1.3 | INTEGER | read-only | The version of the LDP Protocol which this session is using. |
| INT hwMplsLdpSessionRole | 1.3.6.1.4.1.43.45.1.5.12.2.1.4.1.1.5 | INTEGER | read-only | An indication of whether the LDP Entity associated with this session is acting in an 'active' role or a 'passive' role. |
| INT hwMplsLdpSessionState | 1.3.6.1.4.1.43.45.1.5.12.2.1.4.1.1.6 | INTEGER | read-only | The current state of the session, all of the states 1 - 5 are based on the state machine for session negotiation behavior. |
| hwMplsLdpSessionTable | 1.3.6.1.4.1.43.45.1.5.12.2.1.4.1 | not-accessible | A table of Sessions between the LDP Entities and LDP Peers. | |
| NTF hwMplsLdpSessionUpEventFailure | 1.3.6.1.4.1.43.45.1.5.12.2.2.0.15 | Generation of this trap occurs when the value of 'hwMplsLdpSessionState' enters the 'operational(5)' state. |
RFC description
Huawei MPLS Label Distribution Protocol configuration for label switching router nodes and sessions.
Start monitoring Huawei/H3C MPLS routers with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.