All MIBs › LLDP-EXT-DOT1-V2-MIB
Organization: IEEE 802.1 Working Group
Last Updated: 2018-06-21
Category: Protocol: LLDP, Standard: IEEE 802
Description: Updated IEEE 802.1 LLDP extension MIB (version 2) defining enhanced TLV objects for VLAN, port protocol, and link aggregation.
Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.
What Is LLDP-EXT-DOT1-V2-MIB?
LLDP-EXT-DOT1-V2-MIB is the standard IEEE 802.1 Working Group LLDP extension MIB (part of IEEE Std 802.1AB, extending LLDP-V2-MIB) defining organizationally-specific TLV configuration for 802.1Q-related discovery information. Its objects cover per-port TLV transmit-enable flags for port-VLAN ID, VLAN name, protocol-VLAN, protocol identity, VID-usage-digest, and management-VLAN advertisement, alongside local-system tables reporting the port's actual VLAN ID and protocol-VLAN support. As a configuration/protocol-status MIB it lets an administrator confirm which 802.1Q-related TLVs a port advertises via LLDP, useful for automated VLAN/topology discovery tools. It is deployed on network devices implementing IEEE 802.1AB LLDP with 802.1 extension TLVs. Engineers implementing or auditing this functionality typically reference the LLDP-EXT-DOT1-V2-MIB RFC/standard documentation for the authoritative specification.
IPNetwork Monitor allows you to monitor SNMP objects defined in LLDP-EXT-DOT1-V2-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.
Supported Devices
- Network devices implementing IEEE 802.1AB LLDP (802.1 extension TLVs)
Monitoring Examples
An administrator checks lldpV2Xdot1ConfigVlanNameTxEnable to confirm a port is advertising its VLAN name via LLDP, which downstream network-topology discovery tools rely on.
What Can Be Monitored
- 802.1Q-related LLDP TLV advertisement configuration
This MIB depends on
Related MIBs
Imported Objects
From IEEE8021-TC-MIB
| IEEE8021PriorityValue |
From IF-MIB
| ifGeneralInformationGroup | OBJECT-GROUP |
From LLDP-V2-MIB
| lldpV2Extensions | OBJECT-IDENTITY |
| lldpV2LocPortIfIndex | OBJECT-TYPE |
| lldpV2PortConfigEntry | OBJECT-TYPE |
| lldpV2RemIndex | OBJECT-TYPE |
| lldpV2RemLocalDestMACAddress | OBJECT-TYPE |
| lldpV2RemLocalIfIndex | OBJECT-TYPE |
| lldpV2RemTimeMark | OBJECT-TYPE |
From Q-BRIDGE-MIB
| VlanId |
From SNMP-FRAMEWORK-MIB
| SnmpAdminString |
From SNMPv2-CONF
| MODULE-COMPLIANCE | |
| OBJECT-GROUP |
From SNMPv2-SMI
| MODULE-IDENTITY | |
| OBJECT-TYPE | |
| Unsigned32 |
From SNMPv2-TC
| TEXTUAL-CONVENTION | |
| TruthValue |
OIDs
| OID symbolic | OID numeric | Type | Access | Description |
|---|---|---|---|---|
| lldpV2Xdot1Compliances | 1.3.111.2.802.1.1.13.1.5.32962.2.1 | |||
| lldpV2Xdot1Config | 1.3.111.2.802.1.1.13.1.5.32962.1.1 | |||
| lldpV2Xdot1ConfigGroup | 1.3.111.2.802.1.1.13.1.5.32962.2.2.1 | The collection of objects which are used to configure the IEEE 802.1 organizationally defined LLDP extension implementation behavior for the basicSet TLV set. | ||
| lldpV2Xdot1ConfigManVidEntry | 1.3.111.2.802.1.1.13.1.5.32962.1.1.6.1 | not-accessible | LLDP configuration information that specifies the set of port/destination address pairs on which the Local System Management VID will be transmitted. This configuration object augments the lldpV2Xdot1LocManVidEntry, therefore it is only present along with the Management VID contained in the associated lldpV2Xdot1LocManVidEntry entry. Each active lldpV2Xdot1ConfigManVidEntry must be restored from non-volatile storage (along with the corresponding lldpV2Xdot1LocManVidEntry) after a re-initialization of the management system. | |
| lldpV2Xdot1ConfigManVidTable | 1.3.111.2.802.1.1.13.1.5.32962.1.1.6 | not-accessible | A table that controls selection of LLDP Management VID TLVs to be transmitted on individual ports. | |
| T/F lldpV2Xdot1ConfigManVidTxEnable | 1.3.111.2.802.1.1.13.1.5.32962.1.1.6.1.1 | TruthValue | read-write | The lldpV2Xdot1ConfigManVidTxEnable, which is defined as a truth value and configured by the network management, determines whether the IEEE 802.1 organizationally defined Management VID TLV transmission is allowed on a given LLDP transmission-capable port. The value of this object must be restored from non-volatile storage after a re-initialization of the management system. |
| lldpV2Xdot1ConfigPortVlanEntry | 1.3.111.2.802.1.1.13.1.5.32962.1.1.1.1 | not-accessible | LLDP configuration information that controls the transmission of IEEE 802.1 organizationally defined Port VLAN-ID TLV on LLDP transmission-capable ports. This configuration object augments the lldpV2PortConfigEntry of the LLDP-MIB, therefore it is only present along with the port configuration defined by the associated lldpV2PortConfigEntry entry. Each active lldpConfigEntry is restored from non-volatile storage (along with the corresponding lldpV2PortConfigEntry) after a re-initialization of the management system. | |
| lldpV2Xdot1ConfigPortVlanTable | 1.3.111.2.802.1.1.13.1.5.32962.1.1.1 | not-accessible | A table that controls selection of LLDP Port VLAN-ID TLVs to be transmitted on individual ports. | |
| T/F lldpV2Xdot1ConfigPortVlanTxEnable | 1.3.111.2.802.1.1.13.1.5.32962.1.1.1.1.1 | TruthValue | read-write | The lldpV2Xdot1ConfigPortVlanTxEnable, which is defined as a truth value and configured by the network management, determines whether the IEEE 802.1 organizationally defined port VLAN TLV transmission is allowed on a given LLDP transmission-capable port. The value of this object is restored from non-volatile storage after a re-initialization of the management system. |
| lldpV2Xdot1ConfigProtocolEntry | 1.3.111.2.802.1.1.13.1.5.32962.1.1.4.1 | not-accessible | LLDP configuration information that specifies the set of ports (represented as a PortList) on which the Local System Protocol instance is transmitted. This configuration object augments the lldpV2Xdot1LocProtoEntry, therefore it is only present along with the Protocol instance contained in the associated lldpV2Xdot1LocProtoEntry entry. Each active lldpV2Xdot1ConfigProtocolEntry is restored from non-volatile storage (along with the corresponding lldpV2Xdot1LocProtocolEntry) after a re-initialization of the management system. | |
| lldpV2Xdot1ConfigProtocolTable | 1.3.111.2.802.1.1.13.1.5.32962.1.1.4 | not-accessible | The table that controls selection of LLDP Protocol TLV instances to be transmitted on individual ports. | |
| T/F lldpV2Xdot1ConfigProtocolTxEnable | 1.3.111.2.802.1.1.13.1.5.32962.1.1.4.1.1 | TruthValue | read-write | The boolean value that indicates whether the corresponding Local System Protocol Identity instance is transmitted on the port defined by the given lldpV2Xdot1LocProtocolEntry. The value of this object is restored from non-volatile storage after a re-initialization of the management system. |
| lldpV2Xdot1ConfigProtoVlanEntry | 1.3.111.2.802.1.1.13.1.5.32962.1.1.3.1 | not-accessible | LLDP configuration information that specifies the set of ports (represented as a PortList) on which the Local System Protocol VLAN instance is transmitted. This configuration object augments the lldpV2Xdot1LocVlanEntry, therefore it is only present along with the Port and Protocol VLAN ID instance contained in the associated lldpV2Xdot1LocVlanEntry entry. Each active lldpV2Xdot1ConfigProtoVlanEntry is restored from non-volatile storage (along with the corresponding lldpV2Xdot1LocProtoVlanEntry) after a re-initialization of the management system. | |
| lldpV2Xdot1ConfigProtoVlanTable | 1.3.111.2.802.1.1.13.1.5.32962.1.1.3 | not-accessible | The table that controls selection of LLDP Port And Protocol VLAN ID TLV instances to be transmitted on individual ports. | |
| T/F lldpV2Xdot1ConfigProtoVlanTxEnable | 1.3.111.2.802.1.1.13.1.5.32962.1.1.3.1.1 | TruthValue | read-write | The boolean value that indicates whether the corresponding Local System Port and Protocol VLAN instance is transmitted on the port defined by the given lldpV2Xdot1LocProtoVlanEntry. The value of this object is restored from non-volatile storage after a re-initialization of the management system. |
| lldpV2Xdot1ConfigVidUsageDigestEntry | 1.3.111.2.802.1.1.13.1.5.32962.1.1.5.1 | not-accessible | LLDP configuration information that specifies the set of ports (represented as a PortList) on which the local system VID Usage Digest instance will be transmitted. This configuration object augments the lldpLocVidUsageDigestEntry, therefore it is only present along with the VID Usage Digest instance contained in the associated lldpV2Xdot1LocVidUsageDigestEntry entry. Each active lldpConfigVidUsageDigestEntry must be restored from non-volatile storage and re-created (along with the corresponding lldpV2Xdot1LocVidUsageDigestEntry) after a re-initialization of the management system. | |
| lldpV2Xdot1ConfigVidUsageDigestTable | 1.3.111.2.802.1.1.13.1.5.32962.1.1.5 | not-accessible | A table that controls selection of LLDP VID Usage Digest TLVs to be transmitted on individual ports. | |
| T/F lldpV2Xdot1ConfigVidUsageDigestTxEnable | 1.3.111.2.802.1.1.13.1.5.32962.1.1.5.1.1 | TruthValue | read-write | The boolean value that indicates whether the corresponding Local System VID Usage Digest instance will be transmitted on the port defined by the given lldpV2Xdot1LocVidUsageDigestEntry. The value of this object must be restored from non-volatile storage after a reinitialization of the management system. |
| lldpV2Xdot1ConfigVlanNameEntry | 1.3.111.2.802.1.1.13.1.5.32962.1.1.2.1 | not-accessible | LLDP configuration information that specifies the set of ports (represented as a PortList) on which the Local System VLAN name instance is transmitted. This configuration object augments the lldpV2LocVlanEntry, therefore it is only present along with the VLAN Name instance contained in the associated lldpV2LocVlanNameEntry entry. Each active lldpV2Xdot1ConfigVlanNameEntry is restored from non-volatile storage (along with the corresponding lldpV2Xdot1LocVlanNameEntry) after a re-initialization of the management system. | |
| lldpV2Xdot1ConfigVlanNameTable | 1.3.111.2.802.1.1.13.1.5.32962.1.1.2 | not-accessible | The table that controls selection of LLDP VLAN name TLV instances to be transmitted on individual ports. | |
| T/F lldpV2Xdot1ConfigVlanNameTxEnable | 1.3.111.2.802.1.1.13.1.5.32962.1.1.2.1.1 | TruthValue | read-write | The boolean value that indicates whether the corresponding Local System VLAN name instance is transmitted on the port defined by the given lldpV2Xdot1LocVlanNameEntry. The value of this object is restored from non-volatile storage after a re-initialization of the management system. |
| lldpV2Xdot1Conformance | 1.3.111.2.802.1.1.13.1.5.32962.2 | |||
| lldpV2Xdot1Groups | 1.3.111.2.802.1.1.13.1.5.32962.2.2 | |||
| lldpV2Xdot1LocalData | 1.3.111.2.802.1.1.13.1.5.32962.1.2 | |||
| lldpV2Xdot1LocCnEntry | 1.3.111.2.802.1.1.13.1.5.32962.3.1.2.1.1 | not-accessible | Congestion Notification information about a particular port component. | |
| LLD lldpV2Xdot1LocCNPVIndicators | 1.3.111.2.802.1.1.13.1.5.32962.3.1.2.1.1.1 | LldpV2CnBitVector | read-only | This object contains the CNPV indicators for the Port. |
| lldpV2Xdot1LocCnTable | 1.3.111.2.802.1.1.13.1.5.32962.3.1.2.1 | not-accessible | This table contains one row per port of Congestion Notification information (as a part of the LLDP 802.1 organizational extension) on the local system known to this agent. | |
| lldpV2Xdot1LocEntry | 1.3.111.2.802.1.1.13.1.5.32962.1.2.1.1 | not-accessible | Information about IEEE 802.1 organizationally defined LLDP extension. | |
| lldpV2Xdot1LocLinkAggEntry | 1.3.111.2.802.1.1.13.1.5.32962.1.2.7.1 | not-accessible | Link Aggregation information about a particular port component. | |
| U32 lldpV2Xdot1LocLinkAggPortId | 1.3.111.2.802.1.1.13.1.5.32962.1.2.7.1.2 | Unsigned32 | read-only | This object contains the IEEE 802.1 aggregated port identifier, aAggPortID (IEEE Std 802.1AX, 6.3.2.1.1), derived from the ifNumber of the ifIndex for the port component in link aggregation. If the port is not in link aggregation state and/or it does not support link aggregation, this value should be set to zero. |
| LLD lldpV2Xdot1LocLinkAggStatus | 1.3.111.2.802.1.1.13.1.5.32962.1.2.7.1.1 | LldpV2XLinkAggStatusMap | read-only | The bitmap value contains the link aggregation capabilities and the current aggregation status of the link. |
| lldpV2Xdot1LocLinkAggTable | 1.3.111.2.802.1.1.13.1.5.32962.1.2.7 | not-accessible | This table contains one row per port of link aggregation information (as a part of the LLDP 802.1 organizational extension) on the local system known to this agent. | |
| U32 lldpV2Xdot1LocManVid | 1.3.111.2.802.1.1.13.1.5.32962.1.2.6.1.1 | Unsigned32 | read-only | The integer value configured on the Local system for the Management VID, or the value 0 if a Management VID has not been provisioned. |
| lldpV2Xdot1LocManVidEntry | 1.3.111.2.802.1.1.13.1.5.32962.1.2.6.1 | not-accessible | Usage digest information to be transmitted through the given port. | |
| lldpV2Xdot1LocManVidTable | 1.3.111.2.802.1.1.13.1.5.32962.1.2.6 | not-accessible | This table contains one row per ifIndex/ destination MAC address pair for usage digest information on the local system known to this agent. | |
| U32 lldpV2Xdot1LocPortVlanId | 1.3.111.2.802.1.1.13.1.5.32962.1.2.1.1.1 | Unsigned32 | read-only | The integer value used to identify the port's VLAN identifier associated with the local system. A value of zero shall be used if the system either does not know the PVID or does not support Port-based VLAN operation. |
| lldpV2Xdot1LocProtocolEntry | 1.3.111.2.802.1.1.13.1.5.32962.1.2.4.1 | not-accessible | Information about particular protocols that are accessible through the given port component. There may be multiple protocols, identified by particular lldpV2Xdot1ProtocolIndex, lldpV2LocPortIfIndex | |
| OCT lldpV2Xdot1LocProtocolId | 1.3.111.2.802.1.1.13.1.5.32962.1.2.4.1.2 | OCTET STRING | read-only | The octet string value used to identify the protocols associated with the given port of the local system. |
| U32 lldpV2Xdot1LocProtocolIndex | 1.3.111.2.802.1.1.13.1.5.32962.1.2.4.1.1 | Unsigned32 | not-accessible | This object represents an arbitrary local integer value used by this agent to identify a particular protocol identity. |
| lldpV2Xdot1LocProtocolTable | 1.3.111.2.802.1.1.13.1.5.32962.1.2.4 | not-accessible | This table contains one or more rows per protocol identity information on the local system known to this agent. | |
| T/F lldpV2Xdot1LocProtoVlanEnabled | 1.3.111.2.802.1.1.13.1.5.32962.1.2.2.1.3 | TruthValue | read-only | The truth value used to indicate whether the port and protocol VLANs are enabled on the given port associated with the local system. |
| lldpV2Xdot1LocProtoVlanEntry | 1.3.111.2.802.1.1.13.1.5.32962.1.2.2.1 | not-accessible | Port and protocol VLAN ID Information about a particular port component. There may be multiple port and protocol VLANs, identified by a particular lldpV2Xdot1LocProtoVlanId, configured on the given port. | |
| U32 lldpV2Xdot1LocProtoVlanId | 1.3.111.2.802.1.1.13.1.5.32962.1.2.2.1.1 | Unsigned32 | not-accessible | The integer value used to identify the port and protocol VLANs associated with the given port associated with the local system. A value of zero shall be used if the system either does not know the protocol VLAN ID (PPVID) or does not support port and protocol VLAN operation. |
| T/F lldpV2Xdot1LocProtoVlanSupported | 1.3.111.2.802.1.1.13.1.5.32962.1.2.2.1.2 | TruthValue | read-only | The truth value used to indicate whether the given port (associated with the local system) supports port and protocol VLANs. |
| lldpV2Xdot1LocProtoVlanTable | 1.3.111.2.802.1.1.13.1.5.32962.1.2.2 | not-accessible | This table contains one or more rows per Port and Protocol VLAN information about the local system. | |
| LLD lldpV2Xdot1LocReadyIndicators | 1.3.111.2.802.1.1.13.1.5.32962.3.1.2.1.1.2 | LldpV2CnBitVector | read-only | This object contains the Ready indicators for the Port. |
| lldpV2Xdot1LocSysGroup | 1.3.111.2.802.1.1.13.1.5.32962.2.2.2 | The collection of objects which are used to represent IEEE 802.1 organizationally defined LLDP extension associated with the Local Device Information for the basicSet TLV set. | ||
| lldpV2Xdot1LocTable | 1.3.111.2.802.1.1.13.1.5.32962.1.2.1 | not-accessible | This table contains one row per port for IEEE 802.1 organizationally defined LLDP extension on the local system known to this agent. | |
| U32 lldpV2Xdot1LocVidUsageDigest | 1.3.111.2.802.1.1.13.1.5.32962.1.2.5.1.1 | Unsigned32 | read-only | The integer value obtained by applying the CRC32 function to the 128-octet VID Usage Table. A bit of the VID Usage Table contains the value PBB-TE-USAGE (binary 1) if the corresponding element of the MST Configuration Table (IEEE Std 802.1Q 8.9.1) contains the value PBB-TE MSTID (hex FFE) and otherwise contains the value NON-PBB-TE-USAGE (binary 0). |
| lldpV2Xdot1LocVidUsageDigestEntry | 1.3.111.2.802.1.1.13.1.5.32962.1.2.5.1 | not-accessible | Usage digest information to be transmitted through the given port. | |
| lldpV2Xdot1LocVidUsageDigestTable | 1.3.111.2.802.1.1.13.1.5.32962.1.2.5 | not-accessible | This table contains one row per ifIndex/ destination MAC address pair for usage digest information on the local system known to this agent. | |
| VLA lldpV2Xdot1LocVlanId | 1.3.111.2.802.1.1.13.1.5.32962.1.2.3.1.1 | VlanId | not-accessible | The integer value used to identify the IEEE 802.1Q VLAN IDs with which the given port is compatible. |
| STR lldpV2Xdot1LocVlanName | 1.3.111.2.802.1.1.13.1.5.32962.1.2.3.1.2 | SnmpAdminString | read-only | The string value used to identify VLAN name identified by the Vlan Id associated with the given port on the local system. This object should contain the value of the dot1QVLANStaticName object (defined in IETF RFC 4363) identified with the given lldpV2Xdot1LocVlanId. |
| lldpV2Xdot1LocVlanNameEntry | 1.3.111.2.802.1.1.13.1.5.32962.1.2.3.1 | not-accessible | VLAN name Information about a particular port component. There may be multiple VLANs, identified by a particular lldpV2Xdot1LocVlanId, configured on the given port. | |
| lldpV2Xdot1LocVlanNameTable | 1.3.111.2.802.1.1.13.1.5.32962.1.2.3 | not-accessible | This table contains one or more rows per IEEE 802.1Q VLAN name information on the local system known to this agent. | |
| lldpV2Xdot1MIB | 1.3.111.2.802.1.1.13.1.5.32962 | The LLDP Management Information Base extension module for IEEE 802.1 organizationally defined discovery information. In order to ensure the uniqueness of the LLDP-V2-MIB, lldpV2Xdot1MIB is branched from lldpV2Extensions using an Organizationally Unique Identifier (OUI) value as the node. An OUI is a 24 bit globally unique number assigned by the IEEE Registration Authority - see: http://standards.ieee.org/develop/regauth/oui/index.html Unless otherwise indicated, the references in this MIB module are to IEEE Std 802.1Q. Copyright (C) IEEE (2018). This version of this MIB module is published as D.5.5 of IEEE Std 802.1Q; see the standard itself for full legal notices. | ||
| lldpV2Xdot1Objects | 1.3.111.2.802.1.1.13.1.5.32962.1 | |||
| lldpV2Xdot1RemCnEntry | 1.3.111.2.802.1.1.13.1.5.32962.3.1.3.1.1 | not-accessible | Port Extension information about remote systems port component. | |
| LLD lldpV2Xdot1RemCNPVIndicators | 1.3.111.2.802.1.1.13.1.5.32962.3.1.3.1.1.1 | LldpV2CnBitVector | read-only | This object contains the CNPV indicators for the Port. |
| lldpV2Xdot1RemCnTable | 1.3.111.2.802.1.1.13.1.5.32962.3.1.3.1 | not-accessible | This table contains Congestion Notification information (as a part of the LLDP IEEE 802.1 organizational extension) of the remote system. | |
| lldpV2Xdot1RemEntry | 1.3.111.2.802.1.1.13.1.5.32962.1.3.1.1 | not-accessible | Information about a particular port component. | |
| lldpV2Xdot1RemLinkAggEntry | 1.3.111.2.802.1.1.13.1.5.32962.1.3.7.1 | not-accessible | Link Aggregation information about remote system's port component. | |
| U32 lldpV2Xdot1RemLinkAggPortId | 1.3.111.2.802.1.1.13.1.5.32962.1.3.7.1.2 | Unsigned32 | read-only | This object contains the IEEE 802.1 aggregated port identifier, aAggPortID (IEEE Std 802.1AX, 6.3.2.1.1), derived from the ifNumber of the ifIndex for the port component associated with the remote system. If the remote port is not in link aggregation state and/or it does not support link aggregation, this value should be zero. |
| LLD lldpV2Xdot1RemLinkAggStatus | 1.3.111.2.802.1.1.13.1.5.32962.1.3.7.1.1 | LldpV2XLinkAggStatusMap | read-only | The bitmap value contains the link aggregation capabilities and the current aggregation status of the link. |
| lldpV2Xdot1RemLinkAggTable | 1.3.111.2.802.1.1.13.1.5.32962.1.3.7 | not-accessible | This table contains port link aggregation information (as a part of the LLDP IEEE 802.1 organizational extension) of the remote system. | |
| U32 lldpV2Xdot1RemManVid | 1.3.111.2.802.1.1.13.1.5.32962.1.3.6.1.1 | Unsigned32 | read-only | The integer value configured on a system for the Management VID, or the value 0 if a Management VID has not been provisioned. |
| lldpV2Xdot1RemManVidEntry | 1.3.111.2.802.1.1.13.1.5.32962.1.3.6.1 | not-accessible | Management VID information received through the given port/destination address pair. | |
| lldpV2Xdot1RemManVidTable | 1.3.111.2.802.1.1.13.1.5.32962.1.3.6 | not-accessible | This table contains one row per ifIndex/ destination MAC address pair for management VID information received from remote systems. | |
| U32 lldpV2Xdot1RemManVidV2 | 1.3.111.2.802.1.1.13.1.5.32962.1.3.9.1.1 | Unsigned32 | read-only | The integer value configured on a system for the Management VID, or the value 0 if a Management VID has not been provisioned. |
| lldpV2Xdot1RemManVidV2Entry | 1.3.111.2.802.1.1.13.1.5.32962.1.3.9.1 | not-accessible | Management VID information received through the given port/destination address pair. | |
| lldpV2Xdot1RemManVidV2Table | 1.3.111.2.802.1.1.13.1.5.32962.1.3.9 | not-accessible | This table contains one row per ifIndex/ destination MAC address pair for management VID information received from remote systems. | |
| lldpV2Xdot1RemoteData | 1.3.111.2.802.1.1.13.1.5.32962.1.3 | |||
| U32 lldpV2Xdot1RemPortVlanId | 1.3.111.2.802.1.1.13.1.5.32962.1.3.1.1.1 | Unsigned32 | read-only | The integer value used to identify the port's VLAN identifier associated with the remote system. if the remote system either does not know the PVID or does not support Port-based VLAN operation, the value of lldpV2Xdot1RemPortVlanId should be zero. |
| lldpV2Xdot1RemProtocolEntry | 1.3.111.2.802.1.1.13.1.5.32962.1.3.4.1 | not-accessible | Protocol information about a particular port component. There may be multiple protocols, identified by a particular lldpV2Xdot1ProtocolIndex, received on the given port. | |
| OCT lldpV2Xdot1RemProtocolId | 1.3.111.2.802.1.1.13.1.5.32962.1.3.4.1.2 | OCTET STRING | read-only | The octet string value used to identify the protocols associated with the given port of remote system. |
| U32 lldpV2Xdot1RemProtocolIndex | 1.3.111.2.802.1.1.13.1.5.32962.1.3.4.1.1 | Unsigned32 | not-accessible | This object represents an arbitrary local integer value used by this agent to identify a particular protocol identity. |
| lldpV2Xdot1RemProtocolTable | 1.3.111.2.802.1.1.13.1.5.32962.1.3.4 | not-accessible | This table contains one or more rows per protocol information about the remote system, received on the given port. | |
| T/F lldpV2Xdot1RemProtoVlanEnabled | 1.3.111.2.802.1.1.13.1.5.32962.1.3.2.1.3 | TruthValue | read-only | The truth value used to indicate whether the port and protocol VLANs are enabled on the given port associated with the remote system. |
| lldpV2Xdot1RemProtoVlanEntry | 1.3.111.2.802.1.1.13.1.5.32962.1.3.2.1 | not-accessible | Port and protocol VLAN name Information about a particular port component. There may be multiple protocol VLANs, identified by a particular lldpV2Xdot1RemProtoVlanId, configured on the remote system. | |
| U32 lldpV2Xdot1RemProtoVlanId | 1.3.111.2.802.1.1.13.1.5.32962.1.3.2.1.1 | Unsigned32 | not-accessible | The integer value used to identify the port and protocol VLANs associated with the given port associated with the remote system. If port and protocol VLANs are not supported on the given port associated with the remote system, or if the port is not enabled with any port and protocol VLAN, the value of lldpV2Xdot1RemProtoVlanId should be zero. |
| T/F lldpV2Xdot1RemProtoVlanSupported | 1.3.111.2.802.1.1.13.1.5.32962.1.3.2.1.2 | TruthValue | read-only | The truth value used to indicate whether the given port (associated with the remote system) is capable of supporting port and protocol VLANs. |
| lldpV2Xdot1RemProtoVlanTable | 1.3.111.2.802.1.1.13.1.5.32962.1.3.2 | not-accessible | This table contains one or more rows per Port and Protocol VLAN information about the remote system, received on the given port. | |
| LLD lldpV2Xdot1RemReadyIndicators | 1.3.111.2.802.1.1.13.1.5.32962.3.1.3.1.1.2 | LldpV2CnBitVector | read-only | This object contains the Ready indicators for the Port. |
| lldpV2Xdot1RemSysGroup | 1.3.111.2.802.1.1.13.1.5.32962.2.2.3 | The collection of objects which are used to represent LLDP 802.1 organizational extension Remote Device Information for the basicSet TLV set. | ||
| lldpV2Xdot1RemSysV2Group | 1.3.111.2.802.1.1.13.1.5.32962.2.2.4 | The collection of objects which are used to represent LLDP 802.1 organizational extension Remote Device Information for the basicSet TLV set. | ||
| lldpV2Xdot1RemTable | 1.3.111.2.802.1.1.13.1.5.32962.1.3.1 | not-accessible | This table contains one or more rows per physical network connection known to this agent. The agent may wish to ensure that only one lldpV2Xdot1RemEntry is present for each local port, or it may choose to maintain multiple lldpV2Xdot1RemEntries for the same local port. | |
| U32 lldpV2Xdot1RemVidUsageDigest | 1.3.111.2.802.1.1.13.1.5.32962.1.3.5.1.1 | Unsigned32 | read-only | The integer value obtained by applying the CRC32 function to the 128-octet VID Usage Table. A bit of the VID Usage Table contains the value PBB-TE-USAGE (binary 1) if the corresponding element of the MST Configuration Table (IEEE Std 802.1Q 8.9.1) contains the value PBB-TE MSTID (hex FFE)and otherwise contains the value NON-PBB-TE-USAGE (binary 0). |
| lldpV2Xdot1RemVidUsageDigestEntry | 1.3.111.2.802.1.1.13.1.5.32962.1.3.5.1 | not-accessible | Usage digest information received on the given port/destination address pair. | |
| lldpV2Xdot1RemVidUsageDigestTable | 1.3.111.2.802.1.1.13.1.5.32962.1.3.5 | not-accessible | This table contains one row per ifIndex/ destination MAC address pair for usage digest information received by the local system. | |
| U32 lldpV2Xdot1RemVidUsageDigestV2 | 1.3.111.2.802.1.1.13.1.5.32962.1.3.8.1.1 | Unsigned32 | read-only | The integer value obtained by applying the CRC32 function to the 128-octet VID Usage Table. A bit of the VID Usage Table contains the value PBB-TE-USAGE (binary 1) if the corresponding element of the MST Configuration Table (IEEE Std 802.1Q 8.9.1) contains the value PBB-TE MSTID (hex FFE)and otherwise contains the value NON-PBB-TE-USAGE (binary 0). |
| lldpV2Xdot1RemVidUsageDigestV2Entry | 1.3.111.2.802.1.1.13.1.5.32962.1.3.8.1 | not-accessible | Usage digest information received on the given port/destination address pair. | |
| lldpV2Xdot1RemVidUsageDigestV2Table | 1.3.111.2.802.1.1.13.1.5.32962.1.3.8 | not-accessible | This table contains one row per ifIndex/ destination MAC address pair for usage digest information received by the local system. | |
| VLA lldpV2Xdot1RemVlanId | 1.3.111.2.802.1.1.13.1.5.32962.1.3.3.1.1 | VlanId | not-accessible | The integer value used to identify the IEEE 802.1Q VLAN IDs with which the given port of the remote system is compatible. |
| STR lldpV2Xdot1RemVlanName | 1.3.111.2.802.1.1.13.1.5.32962.1.3.3.1.2 | SnmpAdminString | read-only | The string value used to identify VLAN name identified by the VLAN Id associated with the remote system. |
| lldpV2Xdot1RemVlanNameEntry | 1.3.111.2.802.1.1.13.1.5.32962.1.3.3.1 | not-accessible | VLAN name Information about a particular port component. There may be multiple VLANs, identified by a particular lldpV2Xdot1RemVlanId, received on the given port. | |
| lldpV2Xdot1RemVlanNameTable | 1.3.111.2.802.1.1.13.1.5.32962.1.3.3 | not-accessible | This table contains one or more rows per IEEE 802.1Q VLAN name information about the remote system, received on the given port. | |
| lldpV2Xdot1RxCompliance | 1.3.111.2.802.1.1.13.1.5.32962.2.1.3 | A compliance statement for SNMP entities that implement the IEEE 802.1 organizationally defined LLDP extension MIB. This group is mandatory for agents that implement the LLDP 802.1 organizational extension in the RX mode for the basicSet TLV set. This version defines compliance requirements for V2 of the LLDP MIB. | ||
| lldpV2Xdot1RxComplianceV2 | 1.3.111.2.802.1.1.13.1.5.32962.2.1.4 | A compliance statement for SNMP entities that implement the IEEE 802.1 organizationally defined LLDP extension MIB. This group is mandatory for agents that implement the LLDP 802.1 organizational extension in the RX mode for the basicSet TLV set. This version defines compliance requirements for V2 of the LLDP MIB. | ||
| lldpV2Xdot1TxCompliance | 1.3.111.2.802.1.1.13.1.5.32962.2.1.2 | A compliance statement for SNMP entities that implement the IEEE 802.1 organizationally defined LLDP extension MIB. This group is mandatory for agents that implement the LLDP 802.1 organizational extension in the RX mode for the basicSet TLV set. This version defines compliance requirements for V2 of the LLDP MIB. | ||
| lldpV2Xdot1TxRxCompliance | 1.3.111.2.802.1.1.13.1.5.32962.2.1.1 | A compliance statement for SNMP entities that implement the IEEE 802.1 organizationally defined LLDP extension MIB. This group is mandatory for all agents that implement the LLDP 802.1 organizational extension in TX and/or RX mode for the basicSet TLV set. This version defines compliance requirements for V2 of the LLDP MIB. | ||
| lldpXdot1CnCompliance | 1.3.111.2.802.1.1.13.1.5.32962.4.1.1 | A compliance statement for SNMP entities that implement the IEEE 802.1 organizationally defined Congestion Notification LLDP extension MIB. This group is mandatory for agents that implement the Congestion Notification cnSet TLV set. | ||
| lldpXdot1CnCompliances | 1.3.111.2.802.1.1.13.1.5.32962.4.1 | |||
| lldpXdot1CnConfig | 1.3.111.2.802.1.1.13.1.5.32962.3.1.1 | |||
| lldpXdot1CnConfigCnEntry | 1.3.111.2.802.1.1.13.1.5.32962.3.1.1.1.1 | not-accessible | LLDP configuration information that controls the transmission of IEEE 802.1 organizationally defined Congestion Notification TLV on LLDP transmission-capable ports. This configuration object augments the lldpV2PortConfigEntry of the LLDP-MIB, therefore it is only present along with the port configuration defined by the associated lldpV2PortConfigEntry entry. Each active lldpConfigEntry is restored from non-volatile storage (along with the corresponding lldpV2PortConfigEntry) after a re-initialization of the management system. | |
| lldpXdot1CnConfigCnTable | 1.3.111.2.802.1.1.13.1.5.32962.3.1.1.1 | not-accessible | A table that controls selection of Congestion Notification TLVs to be transmitted on individual ports. | |
| T/F lldpXdot1CnConfigCnTxEnable | 1.3.111.2.802.1.1.13.1.5.32962.3.1.1.1.1.1 | TruthValue | read-write | The lldpXdot1CnConfigCnTxEnable, which is defined as a truth value and configured by the network management, determines whether the IEEE 802.1 organizationally defined Congestion Notification TLV transmission is allowed on a given LLDP transmission-capable port. The value of this object is restored from non-volatile storage after a re-initialization of the management system. |
| lldpXdot1CnConformance | 1.3.111.2.802.1.1.13.1.5.32962.4 | |||
| lldpXdot1CnGroup | 1.3.111.2.802.1.1.13.1.5.32962.4.2.1 | The collection of objects that support the Congestion Notification cnSet TLV set. | ||
| lldpXdot1CnGroups | 1.3.111.2.802.1.1.13.1.5.32962.4.2 | |||
| lldpXdot1CnLocalData | 1.3.111.2.802.1.1.13.1.5.32962.3.1.2 | |||
| lldpXdot1CnMIB | 1.3.111.2.802.1.1.13.1.5.32962.3 | |||
| lldpXdot1CnObjects | 1.3.111.2.802.1.1.13.1.5.32962.3.1 | |||
| lldpXdot1CnRemoteData | 1.3.111.2.802.1.1.13.1.5.32962.3.1.3 | |||
| IEE lldpXdot1dcbxAdminApplicationPriorityAEPriority | 1.3.111.2.802.1.1.13.1.5.32962.5.1.4.4.1.3 | IEEE8021PriorityValue | read-create | The priority code point that should be used in frames transporting the protocol indicated by lldpXdot1dcbxAdminApplicationPriorityAESelector and lldpXdot1dcbxAdminApplicationPriorityAEProtocol |
| LLD lldpXdot1dcbxAdminApplicationPriorityAEProtocol | 1.3.111.2.802.1.1.13.1.5.32962.5.1.4.4.1.2 | LldpXdot1dcbxAppProtocol | not-accessible | The protocol indicator of the type indicated by lldpXdot1dcbxAdminApplicationPriorityAESelector. |
| LLD lldpXdot1dcbxAdminApplicationPriorityAESelector | 1.3.111.2.802.1.1.13.1.5.32962.5.1.4.4.1.1 | LldpXdot1dcbxAppSelector | not-accessible | Indicates the contents of the protocol object (lldpXdot1dcbxAdminApplicationPriorityAEProtocol) 1: Ethertype 2: Well Known Port number over TCP, or SCTP 3: Well Known Port number over UDP, or DCCP 4: Well Known Port number over TCP, SCTP, UDP, and DCCP 5: Differentiated Services Code Point (DSCP) value. The 6 bit DSCP value is stored in the low order 6 bits of the protocol object. The higher order bits are set to zero. (See IETF RFC 2474 for the definition of the DSCP value.) |
| lldpXdot1dcbxAdminApplicationPriorityAppEntry | 1.3.111.2.802.1.1.13.1.5.32962.5.1.4.4.1 | not-accessible | Entry that indicates the priority to be used for a given application. | |
| lldpXdot1dcbxAdminApplicationPriorityAppTable | 1.3.111.2.802.1.1.13.1.5.32962.5.1.4.4 | not-accessible | Table containing entries indicating the priorty to be used for a given application | |
| LLD lldpXdot1dcbxAdminApplicationVlanAEProtocol | 1.3.111.2.802.1.1.13.1.5.32962.5.1.4.5.1.2 | LldpXdot1dcbxAppProtocol | not-accessible | The protocol indicator of the type indicated by lldpXdot1dcbxAdminApplicationVlanAESelector. |
| LLD lldpXdot1dcbxAdminApplicationVlanAESelector | 1.3.111.2.802.1.1.13.1.5.32962.5.1.4.5.1.1 | LldpXdot1dcbxAppSelector | not-accessible | Indicates the contents of the protocol object (lldpXdot1dcbxAdminApplicationVlanAEProtocol) 1: Ethertype 2: Well Known Port number over TCP, or SCTP 3: Well Known Port number over UDP, or DCCP 4: Well Known Port number over TCP, SCTP, UDP, and DCCP 5: Differentiated Services Code Point (DSCP) value. The 6 bit DSCP value is stored in the low order 6 bits of the protocol object. The higher order bits are set to zero. (See IETF RFC 2474 for the definition of the DSCP value.) |
| VLA lldpXdot1dcbxAdminApplicationVlanAEVlanId | 1.3.111.2.802.1.1.13.1.5.32962.5.1.4.5.1.3 | VlanId | read-create | The VLAN Identifier that should be used in frames transporting the protocol indicated by lldpXdot1dcbxAdminApplicationVlanAESelector and lldpXdot1dcbxAdminApplicationVlanAEProtocol |
| lldpXdot1dcbxAdminApplicationVlanAppEntry | 1.3.111.2.802.1.1.13.1.5.32962.5.1.4.5.1 | not-accessible | Entry that indicates the VLAN to be used for a given application. | |
| lldpXdot1dcbxAdminApplicationVlanAppTable | 1.3.111.2.802.1.1.13.1.5.32962.5.1.4.5 | not-accessible | Table containing entries indicating the VLAN to be used for a given application | |
| lldpXdot1dcbxAdminData | 1.3.111.2.802.1.1.13.1.5.32962.5.1.4 | |||
| lldpXdot1dcbxAdminETSBasicConfigurationEntry | 1.3.111.2.802.1.1.13.1.5.32962.5.1.4.1.1.1 | not-accessible | Information about the IEEE 802.1 organizational defined ETS Configuration TLV LLDP extension. | |
| lldpXdot1dcbxAdminETSBasicConfigurationTable | 1.3.111.2.802.1.1.13.1.5.32962.5.1.4.1.1 | not-accessible | This table contains one row per port for the IEEE 802.1 organizationally defined LLDP ETS Configuration TLV on the local system known to this agent | |
| T/F lldpXdot1dcbxAdminETSConCreditBasedShaperSupport | 1.3.111.2.802.1.1.13.1.5.32962.5.1.4.1.1.1.1 | TruthValue | read-only | Indicates support for the credit-based shaper Traffic Selection Algorithm. |
| lldpXdot1dcbxAdminETSConfiguration | 1.3.111.2.802.1.1.13.1.5.32962.5.1.4.1 | |||
| IEE lldpXdot1dcbxAdminETSConPriority | 1.3.111.2.802.1.1.13.1.5.32962.5.1.4.1.2.1.1 | IEEE8021PriorityValue | not-accessible | Indicates the priority that is assigned to a traffic class. |
| lldpXdot1dcbxAdminETSConPriorityAssignmentEntry | 1.3.111.2.802.1.1.13.1.5.32962.5.1.4.1.2.1 | not-accessible | Indicates a priority to traffic class assignment. | |
| lldpXdot1dcbxAdminETSConPriorityAssignmentTable | 1.3.111.2.802.1.1.13.1.5.32962.5.1.4.1.2 | not-accessible | This table contains one row per priority. The entry in each row indicates the traffic class to which the priority is assigned. | |
| LLD lldpXdot1dcbxAdminETSConPriTrafficClass | 1.3.111.2.802.1.1.13.1.5.32962.5.1.4.1.2.1.2 | LldpXdot1dcbxTrafficClassValue | read-write | Indicates the traffic class to which this priority is to be assigned. |
| LLD lldpXdot1dcbxAdminETSConTrafficClass | 1.3.111.2.802.1.1.13.1.5.32962.5.1.4.1.3.1.1 | LldpXdot1dcbxTrafficClassValue | not-accessible | Indicates the traffic class to which this bandwidth applies |
| LLD lldpXdot1dcbxAdminETSConTrafficClassBandwidth | 1.3.111.2.802.1.1.13.1.5.32962.5.1.4.1.3.1.2 | LldpXdot1dcbxTrafficClassBandwidthValue | read-write | Indicates the bandwidth assigned to this traffic class. The sum of the bandwidths assigned to a given port is required at all times to eqaul 100. An operation that attempts to change this table such that the bandwidth entires do not total 100 shall be rejected. An implication of this is that modification of this table requires that multiple set operations be included in a single SNMP PDU, commonly referred to as an MSET operation, to perform simultaneous set operations to keep the sum at 100. Any attempt to change a single entry in this table will result in the operation being rejected since entries in the table referring to the given port will no longer sum to 100. |
| lldpXdot1dcbxAdminETSConTrafficClassBandwidthEntry | 1.3.111.2.802.1.1.13.1.5.32962.5.1.4.1.3.1 | not-accessible | Indicates a traffic class to Bandwidth assignment. | |
| lldpXdot1dcbxAdminETSConTrafficClassBandwidthTable | 1.3.111.2.802.1.1.13.1.5.32962.5.1.4.1.3 | not-accessible | This table contains one row per traffic class. The entry in each row indicates the traffic class to which the bandwidth is assigned. | |
| LLD lldpXdot1dcbxAdminETSConTrafficClassesSupported | 1.3.111.2.802.1.1.13.1.5.32962.5.1.4.1.1.1.2 | LldpXdot1dcbxSupportedCapacity | read-only | Indicates the number of traffic classes supported. |
| LLD lldpXdot1dcbxAdminETSConTrafficSelectionAlgorithm | 1.3.111.2.802.1.1.13.1.5.32962.5.1.4.1.4.1.2 | LldpXdot1dcbxTrafficSelectionAlgorithm | read-write | Indicates the Traffic Selection Algorithm to which this traffic class is to be assigned. |
| lldpXdot1dcbxAdminETSConTrafficSelectionAlgorithmEntry | 1.3.111.2.802.1.1.13.1.5.32962.5.1.4.1.4.1 | not-accessible | Indicates a traffic class to traffic selection algorithm assignment. | |
| lldpXdot1dcbxAdminETSConTrafficSelectionAlgorithmTable | 1.3.111.2.802.1.1.13.1.5.32962.5.1.4.1.4 | not-accessible | This table contains one row per traffic class. The entry in each row indicates the traffic selction algorithm to be used by the priority. | |
| LLD lldpXdot1dcbxAdminETSConTSATrafficClass | 1.3.111.2.802.1.1.13.1.5.32962.5.1.4.1.4.1.1 | LldpXdot1dcbxTrafficClassValue | not-accessible | Indicates the traffic class that is assigned to a traffic selection algorithm. |
| T/F lldpXdot1dcbxAdminETSConWilling | 1.3.111.2.802.1.1.13.1.5.32962.5.1.4.1.1.1.3 | TruthValue | read-write | Indicates if the local system is willing to accept the ETS configuration recommended by the remote system. |
| lldpXdot1dcbxAdminETSReco | 1.3.111.2.802.1.1.13.1.5.32962.5.1.4.2 | |||
| LLD lldpXdot1dcbxAdminETSRecoTrafficClass | 1.3.111.2.802.1.1.13.1.5.32962.5.1.4.2.1.1.1 | LldpXdot1dcbxTrafficClassValue | not-accessible | Indicates the traffic class to which this bandwidth applies |
| LLD lldpXdot1dcbxAdminETSRecoTrafficClassBandwidth | 1.3.111.2.802.1.1.13.1.5.32962.5.1.4.2.1.1.2 | LldpXdot1dcbxTrafficClassBandwidthValue | read-write | Indicates the bandwidth assigned to this traffic class. The sum of the bandwidths assigned to a given port is required at all times to eqaul 100. An operation that attempts to change this table such that the bandwidth entires do not total 100 shall be rejected. An implication of this is that modification of this table requires that multiple set operations be included in a single SNMP PDU, commonly referred to as an MSET operation, to perform simultaneous set operations to keep the sum at 100. Any attempt to change a single entry in this table will result in the operation being rejected since entries in the table referring to the given port will no longer sum to 100. |
| lldpXdot1dcbxAdminETSRecoTrafficClassBandwidthEntry | 1.3.111.2.802.1.1.13.1.5.32962.5.1.4.2.1.1 | not-accessible | Indicates a traffic class to Bandwidth assignment. | |
| lldpXdot1dcbxAdminETSRecoTrafficClassBandwidthTable | 1.3.111.2.802.1.1.13.1.5.32962.5.1.4.2.1 | not-accessible | This table contains one row per traffic class. The entry in each row indicates the traffic class to which the bandwidth is assigned. | |
| LLD lldpXdot1dcbxAdminETSRecoTrafficSelectionAlgorithm | 1.3.111.2.802.1.1.13.1.5.32962.5.1.4.2.2.1.2 | LldpXdot1dcbxTrafficSelectionAlgorithm | read-write | Indicates the Traffic Selection Algorithm to which this traffic class is to be assigned. |
| lldpXdot1dcbxAdminETSRecoTrafficSelectionAlgorithmEntry | 1.3.111.2.802.1.1.13.1.5.32962.5.1.4.2.2.1 | not-accessible | Indicates a traffic class to traffic selection algorithm assignment. | |
| lldpXdot1dcbxAdminETSRecoTrafficSelectionAlgorithmTable | 1.3.111.2.802.1.1.13.1.5.32962.5.1.4.2.2 | not-accessible | This table contains one row per traffic class. The entry in each row indicates the traffic selction algorithm to be used by the traffic class. | |
| LLD lldpXdot1dcbxAdminETSRecoTSATrafficClass | 1.3.111.2.802.1.1.13.1.5.32962.5.1.4.2.2.1.1 | LldpXdot1dcbxTrafficClassValue | not-accessible | Indicates the traffic class that is assigned to a traffic selection algorithm. |
| lldpXdot1dcbxAdminPFC | 1.3.111.2.802.1.1.13.1.5.32962.5.1.4.3 | |||
| lldpXdot1dcbxAdminPFCBasicEntry | 1.3.111.2.802.1.1.13.1.5.32962.5.1.4.3.1.1 | not-accessible | Information about the IEEE 802.1 organizational defined PFC TLV LLDP extension. | |
| lldpXdot1dcbxAdminPFCBasicTable | 1.3.111.2.802.1.1.13.1.5.32962.5.1.4.3.1 | not-accessible | This table contains one row per port for the IEEE 802.1 organizationally defined LLDP PFC TLV on the local system known to this agent | |
| LLD lldpXdot1dcbxAdminPFCCap | 1.3.111.2.802.1.1.13.1.5.32962.5.1.4.3.1.1.3 | LldpXdot1dcbxSupportedCapacity | read-only | Indicates the number of traffic classes on the local device that may simultaneously have PFC enabled. Note that this typically indicates a physical limitation of the device. However, some devices may allow this parameter to be administratively configured, in which case the MAX-ACCESS should be changed to read-write with and an appropriate DEFVAL added. |
| T/F lldpXdot1dcbxAdminPFCEnableEnabled | 1.3.111.2.802.1.1.13.1.5.32962.5.1.4.3.2.1.2 | TruthValue | read-write | Indicates if PFC is enabled on the corresponding priority |
| lldpXdot1dcbxAdminPFCEnableEntry | 1.3.111.2.802.1.1.13.1.5.32962.5.1.4.3.2.1 | not-accessible | Each entry indicates if PFC is enabled on the correponding priority | |
| IEE lldpXdot1dcbxAdminPFCEnablePriority | 1.3.111.2.802.1.1.13.1.5.32962.5.1.4.3.2.1.1 | IEEE8021PriorityValue | not-accessible | Prioity for which PFC is enabled / disabled |
| lldpXdot1dcbxAdminPFCEnableTable | 1.3.111.2.802.1.1.13.1.5.32962.5.1.4.3.2 | not-accessible | This table contains eight entries, one entry per priority, indicating if PFC is enabled on the corresponding priority. | |
| T/F lldpXdot1dcbxAdminPFCMBC | 1.3.111.2.802.1.1.13.1.5.32962.5.1.4.3.1.1.2 | TruthValue | read-only | Indicates if the local system is capable of bypassing MACsec processing when MACsec is disabled. |
| T/F lldpXdot1dcbxAdminPFCWilling | 1.3.111.2.802.1.1.13.1.5.32962.5.1.4.3.1.1.1 | TruthValue | read-write | Indicates if the local system is willing to accept the PFC configuration of the remote system. |
| lldpXdot1dcbxApplicationPriorityGroup | 1.3.111.2.802.1.1.13.1.5.32962.6.2.3 | The collection of objects used for Application priority. | ||
| lldpXdot1dcbxApplicationVlanGroup | 1.3.111.2.802.1.1.13.1.5.32962.6.2.4 | The collection of objects used for Application VLAN. | ||
| lldpXdot1dcbxCompliance | 1.3.111.2.802.1.1.13.1.5.32962.6.1.1 | A compliance statement for SNMP entities that implement the IEEE 802.1 organizationally defined DCBX LLDP extension MIB. This group is mandatory for agents which implement Enhanced Transmission Selection. | ||
| lldpXdot1dcbxCompliances | 1.3.111.2.802.1.1.13.1.5.32962.6.1 | |||
| lldpXdot1dcbxConfig | 1.3.111.2.802.1.1.13.1.5.32962.5.1.1 | |||
| lldpXdot1dcbxConfigApplicationPriorityEntry | 1.3.111.2.802.1.1.13.1.5.32962.5.1.1.4.1 | not-accessible | LLDP configuration information that controls the transmission of IEEE 802.1 organizationally defined Application Priority TLV on LLDP transmission-capable ports. This configuration object augments the lldpV2PortConfigEntry of the LLDP-MIB, therefore it is only present along with the port configuration defined by the associated lldpV2PortConfigEntry entry. Each active lldpConfigEntry is restored from non-volatile storage (along with the corresponding lldpV2PortConfigEntry) after a re-initialization of the management system. | |
| lldpXdot1dcbxConfigApplicationPriorityTable | 1.3.111.2.802.1.1.13.1.5.32962.5.1.1.4 | not-accessible | A table that controls selection of Priority-based Flow Control Configuration TLVs to be transmitted on individual ports. | |
| T/F lldpXdot1dcbxConfigApplicationPriorityTxEnable | 1.3.111.2.802.1.1.13.1.5.32962.5.1.1.4.1.1 | TruthValue | read-write | The lldpXdot1dcbxConfigApplicationPriorityTxEnable, which is defined as a truth value and configured by the network management, determines whether the IEEE 802.1 organizationally defined Application Priority TLV transmission is allowed on a given LLDP transmission-capable port. The value of this object is restored from non-volatile storage after a re-initialization of the management system. |
| lldpXdot1dcbxConfigApplicationVlanEntry | 1.3.111.2.802.1.1.13.1.5.32962.5.1.1.5.1 | not-accessible | LLDP configuration information that controls the transmission of IEEE 802.1 organizationally defined Application VLAN TLV on LLDP transmission-capable ports. This configuration object augments the lldpV2PortConfigEntry of the LLDP-MIB, therefore it is only present along with the port configuration defined by the associated lldpV2PortConfigEntry entry. Each active lldpConfigEntry is restored from non-volatile storage (along with the corresponding lldpV2PortConfigEntry) after a re-initialization of the management system. | |
| lldpXdot1dcbxConfigApplicationVlanTable | 1.3.111.2.802.1.1.13.1.5.32962.5.1.1.5 | not-accessible | A table that controls selection of Application VLAN TLVs to be transmitted on individual ports. | |
| T/F lldpXdot1dcbxConfigApplicationVlanTxEnable | 1.3.111.2.802.1.1.13.1.5.32962.5.1.1.5.1.1 | TruthValue | read-write | The lldpXdot1dcbxConfigApplicationVlanTxEnable, which is defined as a truth value and configured by the network management, determines whether the IEEE 802.1 organizationally defined Application VLAN TLV transmission is allowed on a given LLDP transmission-capable port. The value of this object is restored from non-volatile storage after a re-initialization of the management system. |
| lldpXdot1dcbxConfigETSConfigurationEntry | 1.3.111.2.802.1.1.13.1.5.32962.5.1.1.1.1 | not-accessible | LLDP configuration information that controls the transmission of IEEE 802.1 organizationally defined ETS Configuration TLV on LLDP transmission-capable ports. This configuration object augments the lldpV2PortConfigEntry of the LLDP-MIB, therefore it is only present along with the port configuration defined by the associated lldpV2PortConfigEntry entry. Each active lldpConfigEntry is restored from non-volatile storage (along with the corresponding lldpV2PortConfigEntry) after a re-initialization of the management system. | |
| lldpXdot1dcbxConfigETSConfigurationTable | 1.3.111.2.802.1.1.13.1.5.32962.5.1.1.1 | not-accessible | A table that controls selection of ETS Configuration TLVs to be transmitted on individual ports. | |
| T/F lldpXdot1dcbxConfigETSConfigurationTxEnable | 1.3.111.2.802.1.1.13.1.5.32962.5.1.1.1.1.1 | TruthValue | read-write | The lldpXdot1dcbxConfigETSConfigurationTxEnable, which is defined as a truth value and configured by the network management, determines whether the IEEE 802.1 organizationally defined ETS Configuration TLV transmission is allowed on a given LLDP transmission-capable port. The value of this object is restored from non-volatile storage after a re-initialization of the management system. |
| lldpXdot1dcbxConfigETSRecommendationEntry | 1.3.111.2.802.1.1.13.1.5.32962.5.1.1.2.1 | not-accessible | LLDP configuration information that controls the transmission of IEEE 802.1 organizationally defined ETS Recommendation TLV on LLDP transmission-capable ports. This configuration object augments the lldpV2PortConfigEntry of the LLDP-MIB, therefore it is only present along with the port configuration defined by the associated lldpV2PortConfigEntry entry. Each active lldpConfigEntry is restored from non-volatile storage (along with the corresponding lldpV2PortConfigEntry) after a re-initialization of the management system. | |
| lldpXdot1dcbxConfigETSRecommendationTable | 1.3.111.2.802.1.1.13.1.5.32962.5.1.1.2 | not-accessible | A table that controls selection of ETS Recommendation TLVs to be transmitted on individual ports. | |
| T/F lldpXdot1dcbxConfigETSRecommendationTxEnable | 1.3.111.2.802.1.1.13.1.5.32962.5.1.1.2.1.1 | TruthValue | read-write | The lldpXdot1dcbxConfigETSRecommendationTxEnable, which is defined as a truth value and configured by the network management, determines whether the IEEE 802.1 organizationally defined ETS Recommendation TLV transmission is allowed on a given LLDP transmission-capable port. The value of this object is restored from non-volatile storage after a re-initialization of the management system. |
| lldpXdot1dcbxConfigPFCEntry | 1.3.111.2.802.1.1.13.1.5.32962.5.1.1.3.1 | not-accessible | LLDP configuration information that controls the transmission of IEEE 802.1 organizationally defined Priority-based Flow Control Configuration TLV on LLDP transmission-capable ports. This configuration object augments the lldpV2PortConfigEntry of the LLDP-MIB, therefore it is only present along with the port configuration defined by the associated lldpV2PortConfigEntry entry. Each active lldpConfigEntry is restored from non-volatile storage (along with the corresponding lldpV2PortConfigEntry) after a re-initialization of the management system. | |
| lldpXdot1dcbxConfigPFCTable | 1.3.111.2.802.1.1.13.1.5.32962.5.1.1.3 | not-accessible | A table that controls selection of Priority-based Flow Control Configuration TLVs to be transmitted on individual ports. | |
| T/F lldpXdot1dcbxConfigPFCTxEnable | 1.3.111.2.802.1.1.13.1.5.32962.5.1.1.3.1.1 | TruthValue | read-write | The lldpXdot1dcbxConfigPFCTxEnable, which is defined as a truth value and configured by the network management, determines whether the IEEE 802.1 organizationally defined Priority-based Flow Control Configuration TLV transmission is allowed on a given LLDP transmission-capable port. The value of this object is restored from non-volatile storage after a re-initialization of the management system. |
| lldpXdot1dcbxConformance | 1.3.111.2.802.1.1.13.1.5.32962.6 | |||
| lldpXdot1dcbxETSGroup | 1.3.111.2.802.1.1.13.1.5.32962.6.2.1 | The collection of objects used for Enhanced Transmission Selection. | ||
| lldpXdot1dcbxGroups | 1.3.111.2.802.1.1.13.1.5.32962.6.2 | |||
| lldpXdot1dcbxLocalData | 1.3.111.2.802.1.1.13.1.5.32962.5.1.2 | |||
| IEE lldpXdot1dcbxLocApplicationPriorityAEPriority | 1.3.111.2.802.1.1.13.1.5.32962.5.1.2.4.1.3 | IEEE8021PriorityValue | read-only | The priority code point that should be used in frames transporting the protocol indicated by lldpXdot1dcbxLocApplicationPriorityAESelector and lldpXdot1dcbxLocApplicationPriorityAEProtocol |
| LLD lldpXdot1dcbxLocApplicationPriorityAEProtocol | 1.3.111.2.802.1.1.13.1.5.32962.5.1.2.4.1.2 | LldpXdot1dcbxAppProtocol | not-accessible | The protocol indicator of the type indicated by lldpXdot1dcbxLocApplicationPriorityAESelector. |
| LLD lldpXdot1dcbxLocApplicationPriorityAESelector | 1.3.111.2.802.1.1.13.1.5.32962.5.1.2.4.1.1 | LldpXdot1dcbxAppSelector | not-accessible | Indicates the contents of the protocol object (lldpXdot1dcbxLocApplicationPriorityAEProtocol) 1: Ethertype 2: Well Known Port number over TCP, or SCTP 3: Well Known Port number over UDP, or DCCP 4: Well Known Port number over TCP, SCTP, UDP, and DCCP 5: Differentiated Services Code Point (DSCP) value. The 6 bit DSCP value is stored in the low order 6 bits of the protocol object. The higher order bits are set to zero. (See IETF RFC 2474 for the definition of the DSCP value.) |
| lldpXdot1dcbxLocApplicationPriorityAppEntry | 1.3.111.2.802.1.1.13.1.5.32962.5.1.2.4.1 | not-accessible | Entry that indicates the priority to be used for a given application. | |
| lldpXdot1dcbxLocApplicationPriorityAppTable | 1.3.111.2.802.1.1.13.1.5.32962.5.1.2.4 | not-accessible | Table containing entries indicating the priorty to be used for a given application | |
| LLD lldpXdot1dcbxLocApplicationVlanAEProtocol | 1.3.111.2.802.1.1.13.1.5.32962.5.1.2.5.1.2 | LldpXdot1dcbxAppProtocol | not-accessible | The protocol indicator of the type indicated by lldpXdot1dcbxLocApplicationVlanAESelector. |
| LLD lldpXdot1dcbxLocApplicationVlanAESelector | 1.3.111.2.802.1.1.13.1.5.32962.5.1.2.5.1.1 | LldpXdot1dcbxAppSelector | not-accessible | Indicates the contents of the protocol object (lldpXdot1dcbxLocApplicationVlanAEProtocol) 1: Ethertype 2: Well Known Port number over TCP, or SCTP 3: Well Known Port number over UDP, or DCCP 4: Well Known Port number over TCP, SCTP, UDP, and DCCP 5: Differentiated Services Code Point (DSCP) value. The 6 bit DSCP value is stored in the low order 6 bits of the protocol object. The higher order bits are set to zero. (See IETF RFC 2474 for the definition of the DSCP value.) |
| VLA lldpXdot1dcbxLocApplicationVlanAEVlanId | 1.3.111.2.802.1.1.13.1.5.32962.5.1.2.5.1.3 | VlanId | read-only | The VLAN Identifier that should be used in frames transporting the protocol indicated by lldpXdot1dcbxLocApplicationVlanAESelector and lldpXdot1dcbxLocApplicationVlanAEProtocol |
| lldpXdot1dcbxLocApplicationVlanAppEntry | 1.3.111.2.802.1.1.13.1.5.32962.5.1.2.5.1 | not-accessible | Entry that indicates the VLAN to be used for a given application. | |
| lldpXdot1dcbxLocApplicationVlanAppTable | 1.3.111.2.802.1.1.13.1.5.32962.5.1.2.5 | not-accessible | Table containing entries indicating the VLAN to be used for a given application | |
| lldpXdot1dcbxLocETSBasicConfigurationEntry | 1.3.111.2.802.1.1.13.1.5.32962.5.1.2.1.1.1 | not-accessible | Information about the IEEE 802.1 organizational defined ETS Configuration TLV LLDP extension. | |
| lldpXdot1dcbxLocETSBasicConfigurationTable | 1.3.111.2.802.1.1.13.1.5.32962.5.1.2.1.1 | not-accessible | This table contains one row per port for the IEEE 802.1 organizationally defined LLDP ETS Configuration TLV on the local system known to this agent | |
| T/F lldpXdot1dcbxLocETSConCreditBasedShaperSupport | 1.3.111.2.802.1.1.13.1.5.32962.5.1.2.1.1.1.1 | TruthValue | read-only | Indicates if the credit-based shaper Traffic Selection Algorithm is supported on the local system. |
| lldpXdot1dcbxLocETSConfiguration | 1.3.111.2.802.1.1.13.1.5.32962.5.1.2.1 | |||
| IEE lldpXdot1dcbxLocETSConPriority | 1.3.111.2.802.1.1.13.1.5.32962.5.1.2.1.2.1.1 | IEEE8021PriorityValue | not-accessible | Indicates the priority that is assigned to a traffic class. |
| lldpXdot1dcbxLocETSConPriorityAssignmentEntry | 1.3.111.2.802.1.1.13.1.5.32962.5.1.2.1.2.1 | not-accessible | Indicates a priority to traffic class assignment. | |
| lldpXdot1dcbxLocETSConPriorityAssignmentTable | 1.3.111.2.802.1.1.13.1.5.32962.5.1.2.1.2 | not-accessible | This table contains one row per priority. The entry in each row indicates the traffic class to which the priority is assigned. | |
| LLD lldpXdot1dcbxLocETSConPriTrafficClass | 1.3.111.2.802.1.1.13.1.5.32962.5.1.2.1.2.1.2 | LldpXdot1dcbxTrafficClassValue | read-only | Indicates the traffic class to which this priority is to be assigned. |
| LLD lldpXdot1dcbxLocETSConTrafficClass | 1.3.111.2.802.1.1.13.1.5.32962.5.1.2.1.3.1.1 | LldpXdot1dcbxTrafficClassValue | not-accessible | Indicates the traffic class to which this bandwidth applies |
| LLD lldpXdot1dcbxLocETSConTrafficClassBandwidth | 1.3.111.2.802.1.1.13.1.5.32962.5.1.2.1.3.1.2 | LldpXdot1dcbxTrafficClassBandwidthValue | read-only | Indicates the bandwidth assigned to this traffic class. |
| lldpXdot1dcbxLocETSConTrafficClassBandwidthEntry | 1.3.111.2.802.1.1.13.1.5.32962.5.1.2.1.3.1 | not-accessible | Indicates a traffic class to Bandwidth assignment. | |
| lldpXdot1dcbxLocETSConTrafficClassBandwidthTable | 1.3.111.2.802.1.1.13.1.5.32962.5.1.2.1.3 | not-accessible | This table contains one row per traffic class. The entry in each row indicates the traffic class to which the bandwidth is assigned. | |
| LLD lldpXdot1dcbxLocETSConTrafficClassesSupported | 1.3.111.2.802.1.1.13.1.5.32962.5.1.2.1.1.1.2 | LldpXdot1dcbxSupportedCapacity | read-only | Indicates the number of traffic classes supported. |
| LLD lldpXdot1dcbxLocETSConTrafficSelectionAlgorithm | 1.3.111.2.802.1.1.13.1.5.32962.5.1.2.1.4.1.2 | LldpXdot1dcbxTrafficSelectionAlgorithm | read-only | Indicates the Traffic Selection Algorithm to which this traffic class is to be assigned. |
| lldpXdot1dcbxLocETSConTrafficSelectionAlgorithmEntry | 1.3.111.2.802.1.1.13.1.5.32962.5.1.2.1.4.1 | not-accessible | Indicates a traffic class to traffic selection algorithm assignment. | |
| lldpXdot1dcbxLocETSConTrafficSelectionAlgorithmTable | 1.3.111.2.802.1.1.13.1.5.32962.5.1.2.1.4 | not-accessible | This table contains one row per traffic class. The entry in each row indicates the traffic selction algorithm to be used by the traffic class. | |
| LLD lldpXdot1dcbxLocETSConTSATrafficClass | 1.3.111.2.802.1.1.13.1.5.32962.5.1.2.1.4.1.1 | LldpXdot1dcbxTrafficClassValue | not-accessible | Indicates the traffic class that is assigned to a traffic selection algorithm. |
| T/F lldpXdot1dcbxLocETSConWilling | 1.3.111.2.802.1.1.13.1.5.32962.5.1.2.1.1.1.3 | TruthValue | read-only | Indicates if the local system is willing to accept the ETS configuration recommended by the remote system. |
| lldpXdot1dcbxLocETSReco | 1.3.111.2.802.1.1.13.1.5.32962.5.1.2.2 | |||
| LLD lldpXdot1dcbxLocETSRecoTrafficClass | 1.3.111.2.802.1.1.13.1.5.32962.5.1.2.2.1.1.1 | LldpXdot1dcbxTrafficClassValue | not-accessible | Indicates the traffic class to which this bandwidth applies |
| LLD lldpXdot1dcbxLocETSRecoTrafficClassBandwidth | 1.3.111.2.802.1.1.13.1.5.32962.5.1.2.2.1.1.2 | LldpXdot1dcbxTrafficClassBandwidthValue | read-only | Indicates the bandwidth assigned to this traffic class. |
| lldpXdot1dcbxLocETSRecoTrafficClassBandwidthEntry | 1.3.111.2.802.1.1.13.1.5.32962.5.1.2.2.1.1 | not-accessible | Indicates a traffic class to Bandwidth assignment. | |
| lldpXdot1dcbxLocETSRecoTrafficClassBandwidthTable | 1.3.111.2.802.1.1.13.1.5.32962.5.1.2.2.1 | not-accessible | This table contains one row per traffic class. The entry in each row indicates the traffic class to which the bandwidth is assigned. | |
| LLD lldpXdot1dcbxLocETSRecoTrafficSelectionAlgorithm | 1.3.111.2.802.1.1.13.1.5.32962.5.1.2.2.2.1.2 | LldpXdot1dcbxTrafficSelectionAlgorithm | read-only | Indicates the Traffic Selection Algorithm to which this traffic class is to be assigned. |
| lldpXdot1dcbxLocETSRecoTrafficSelectionAlgorithmEntry | 1.3.111.2.802.1.1.13.1.5.32962.5.1.2.2.2.1 | not-accessible | Indicates a priority to traffic selection algorithm assignment. | |
| lldpXdot1dcbxLocETSRecoTrafficSelectionAlgorithmTable | 1.3.111.2.802.1.1.13.1.5.32962.5.1.2.2.2 | not-accessible | This table contains one row per priority. The entry in each row indicates the traffic selction algorithm to be used by the traffic class. | |
| LLD lldpXdot1dcbxLocETSRecoTSATrafficClass | 1.3.111.2.802.1.1.13.1.5.32962.5.1.2.2.2.1.1 | LldpXdot1dcbxTrafficClassValue | not-accessible | Indicates the traffic class that is assigned to a traffic selection algorithm. |
| lldpXdot1dcbxLocPFC | 1.3.111.2.802.1.1.13.1.5.32962.5.1.2.3 | |||
| lldpXdot1dcbxLocPFCBasicEntry | 1.3.111.2.802.1.1.13.1.5.32962.5.1.2.3.1.1 | not-accessible | Information about the IEEE 802.1 organizational defined PFC TLV LLDP extension. | |
| lldpXdot1dcbxLocPFCBasicTable | 1.3.111.2.802.1.1.13.1.5.32962.5.1.2.3.1 | not-accessible | This table contains one row per port for the IEEE 802.1 organizationally defined LLDP PFC TLV on the local system known to this agent | |
| LLD lldpXdot1dcbxLocPFCCap | 1.3.111.2.802.1.1.13.1.5.32962.5.1.2.3.1.1.3 | LldpXdot1dcbxSupportedCapacity | read-only | Indicates the number of traffic classes on the local device that may simultaneously have PFC enabled. |
| T/F lldpXdot1dcbxLocPFCEnableEnabled | 1.3.111.2.802.1.1.13.1.5.32962.5.1.2.3.2.1.2 | TruthValue | read-only | Indicates if PFC is enabled on the corresponding priority |
| lldpXdot1dcbxLocPFCEnableEntry | 1.3.111.2.802.1.1.13.1.5.32962.5.1.2.3.2.1 | not-accessible | Each entry indicates if PFC is enabled on the correponding priority | |
| IEE lldpXdot1dcbxLocPFCEnablePriority | 1.3.111.2.802.1.1.13.1.5.32962.5.1.2.3.2.1.1 | IEEE8021PriorityValue | not-accessible | Prioity for which PFC is enabled / disabled |
| lldpXdot1dcbxLocPFCEnableTable | 1.3.111.2.802.1.1.13.1.5.32962.5.1.2.3.2 | not-accessible | This table contains eight entries, one entry per priority, indicating if PFC is enabled on the corresponding priority. | |
| T/F lldpXdot1dcbxLocPFCMBC | 1.3.111.2.802.1.1.13.1.5.32962.5.1.2.3.1.1.2 | TruthValue | read-only | Indicates if the local system is capable of bypassing MACsec processing when MACsec is disabled. |
| T/F lldpXdot1dcbxLocPFCWilling | 1.3.111.2.802.1.1.13.1.5.32962.5.1.2.3.1.1.1 | TruthValue | read-only | Indicates if the local system is willing to accept the PFC configuration of the remote system. |
| lldpXdot1dcbxMIB | 1.3.111.2.802.1.1.13.1.5.32962.5 | |||
| lldpXdot1dcbxObjects | 1.3.111.2.802.1.1.13.1.5.32962.5.1 | |||
| lldpXdot1dcbxPFCGroup | 1.3.111.2.802.1.1.13.1.5.32962.6.2.2 | The collection of objects used for Priority- base Flow Control. | ||
| IEE lldpXdot1dcbxRemApplicationPriorityAEPriority | 1.3.111.2.802.1.1.13.1.5.32962.5.1.3.4.1.3 | IEEE8021PriorityValue | read-only | The priority code point that should be used in frames transporting the protocol indicated by lldpXdot1dcbxRemApplicationPriorityAESelector and lldpXdot1dcbxRemApplicationPriorityAEProtocol |
| LLD lldpXdot1dcbxRemApplicationPriorityAEProtocol | 1.3.111.2.802.1.1.13.1.5.32962.5.1.3.4.1.2 | LldpXdot1dcbxAppProtocol | not-accessible | The protocol indicator of the type indicated by lldpXdot1dcbxRemApplicationPriorityAESelector. |
| LLD lldpXdot1dcbxRemApplicationPriorityAESelector | 1.3.111.2.802.1.1.13.1.5.32962.5.1.3.4.1.1 | LldpXdot1dcbxAppSelector | not-accessible | Indicates the contents of the protocol object (lldpXdot1dcbxRemApplicationPriorityAEProtocol) 1: Ethertype 2: Well Known Port number over TCP, or SCTP 3: Well Known Port number over UDP, or DCCP 4: Well Known Port number over TCP, SCTP, UDP, and DCCP 5: Differentiated Services Code Point (DSCP) value. The 6 bit DSCP value is stored in the low order 6 bits of the protocol object. The higher order bits are set to zero. (See IETF RFC 2474 for the definition of the DSCP value.) |
| lldpXdot1dcbxRemApplicationPriorityAppEntry | 1.3.111.2.802.1.1.13.1.5.32962.5.1.3.4.1 | not-accessible | Entry that indicates the priority to be used for a given application. | |
| lldpXdot1dcbxRemApplicationPriorityAppTable | 1.3.111.2.802.1.1.13.1.5.32962.5.1.3.4 | not-accessible | Table containing entries indicating the priorty to be used for a given application | |
| LLD lldpXdot1dcbxRemApplicationVlanAEProtocol | 1.3.111.2.802.1.1.13.1.5.32962.5.1.3.5.1.2 | LldpXdot1dcbxAppProtocol | not-accessible | The protocol indicator of the type indicated by lldpXdot1dcbxRemApplicationVlanAESelector. |
| LLD lldpXdot1dcbxRemApplicationVlanAESelector | 1.3.111.2.802.1.1.13.1.5.32962.5.1.3.5.1.1 | LldpXdot1dcbxAppSelector | not-accessible | Indicates the contents of the protocol object (lldpXdot1dcbxRemApplicationVlanAEProtocol) 1: Ethertype 2: Well Known Port number over TCP, or SCTP 3: Well Known Port number over UDP, or DCCP 4: Well Known Port number over TCP, SCTP, UDP, and DCCP 5: Differentiated Services Code Point (DSCP) value. The 6 bit DSCP value is stored in the low order 6 bits of the protocol object. The higher order bits are set to zero. (See IETF RFC 2474 for the definition of the DSCP value.) |
| VLA lldpXdot1dcbxRemApplicationVlanAEVlanId | 1.3.111.2.802.1.1.13.1.5.32962.5.1.3.5.1.3 | VlanId | read-only | The VLAN Identifier that should be used in frames transporting the protocol indicated by lldpXdot1dcbxRemApplicationVlanAESelector and lldpXdot1dcbxRemApplicationVlanAEProtocol |
| lldpXdot1dcbxRemApplicationVlanAppEntry | 1.3.111.2.802.1.1.13.1.5.32962.5.1.3.5.1 | not-accessible | Entry that indicates the VLAN to be used for a given application. | |
| lldpXdot1dcbxRemApplicationVlanAppTable | 1.3.111.2.802.1.1.13.1.5.32962.5.1.3.5 | not-accessible | Table containing entries indicating the VLAN to be used for a given application | |
| lldpXdot1dcbxRemETSBasicConfigurationEntry | 1.3.111.2.802.1.1.13.1.5.32962.5.1.3.1.1.1 | not-accessible | Information about the IEEE 802.1 organizational defined ETS Configuration TLV LLDP extension. | |
| lldpXdot1dcbxRemETSBasicConfigurationTable | 1.3.111.2.802.1.1.13.1.5.32962.5.1.3.1.1 | not-accessible | This table contains one row per port for the IEEE 802.1 organizationally defined LLDP ETS Configuration TLV on the local system known to this agent | |
| T/F lldpXdot1dcbxRemETSConCreditBasedShaperSupport | 1.3.111.2.802.1.1.13.1.5.32962.5.1.3.1.1.1.1 | TruthValue | read-only | Indicates if the credit-based shaper Traffic Selection algorithm is supported on the remote system. |
| lldpXdot1dcbxRemETSConfiguration | 1.3.111.2.802.1.1.13.1.5.32962.5.1.3.1 | |||
| IEE lldpXdot1dcbxRemETSConPriority | 1.3.111.2.802.1.1.13.1.5.32962.5.1.3.1.2.1.1 | IEEE8021PriorityValue | not-accessible | Indicates the priority that is assigned to a traffic class. |
| lldpXdot1dcbxRemETSConPriorityAssignmentEntry | 1.3.111.2.802.1.1.13.1.5.32962.5.1.3.1.2.1 | not-accessible | Indicates a priority to traffic class assignment. | |
| lldpXdot1dcbxRemETSConPriorityAssignmentTable | 1.3.111.2.802.1.1.13.1.5.32962.5.1.3.1.2 | not-accessible | This table contains one row per priority. The entry in each row indicates the traffic class to which the priority is assigned. | |
| LLD lldpXdot1dcbxRemETSConPriTrafficClass | 1.3.111.2.802.1.1.13.1.5.32962.5.1.3.1.2.1.2 | LldpXdot1dcbxTrafficClassValue | read-only | Indicates the traffic class to which this priority is to be assigned. |
| LLD lldpXdot1dcbxRemETSConTrafficClass | 1.3.111.2.802.1.1.13.1.5.32962.5.1.3.1.3.1.1 | LldpXdot1dcbxTrafficClassValue | not-accessible | Indicates the traffic class to which this bandwidth applies |
| LLD lldpXdot1dcbxRemETSConTrafficClassBandwidth | 1.3.111.2.802.1.1.13.1.5.32962.5.1.3.1.3.1.2 | LldpXdot1dcbxTrafficClassBandwidthValue | read-only | Indicates the bandwidth assigned to this traffic class. |
| lldpXdot1dcbxRemETSConTrafficClassBandwidthEntry | 1.3.111.2.802.1.1.13.1.5.32962.5.1.3.1.3.1 | not-accessible | Indicates a traffic class to Bandwidth assignment. | |
| lldpXdot1dcbxRemETSConTrafficClassBandwidthTable | 1.3.111.2.802.1.1.13.1.5.32962.5.1.3.1.3 | not-accessible | This table contains one row per traffic class. The entry in each row indicates the traffic class to which the bandwidth is assigned. | |
| LLD lldpXdot1dcbxRemETSConTrafficClassesSupported | 1.3.111.2.802.1.1.13.1.5.32962.5.1.3.1.1.1.2 | LldpXdot1dcbxSupportedCapacity | read-only | Indicates the number of traffic classes supported. |
| LLD lldpXdot1dcbxRemETSConTrafficSelectionAlgorithm | 1.3.111.2.802.1.1.13.1.5.32962.5.1.3.1.4.1.2 | LldpXdot1dcbxTrafficSelectionAlgorithm | read-only | Indicates the Traffic Selection Algorithm to which this traffic class is to be assigned. |
| lldpXdot1dcbxRemETSConTrafficSelectionAlgorithmEntry | 1.3.111.2.802.1.1.13.1.5.32962.5.1.3.1.4.1 | not-accessible | Indicates a traffic class to traffic selection algorithm assignment. | |
| lldpXdot1dcbxRemETSConTrafficSelectionAlgorithmTable | 1.3.111.2.802.1.1.13.1.5.32962.5.1.3.1.4 | not-accessible | This table contains one row per traffic class. The entry in each row indicates the traffic selction algorithm to be used by the traffic class. | |
| LLD lldpXdot1dcbxRemETSConTSATrafficClass | 1.3.111.2.802.1.1.13.1.5.32962.5.1.3.1.4.1.1 | LldpXdot1dcbxTrafficClassValue | not-accessible | Indicates the traffic class that is assigned to a traffic selection algorithm. |
| T/F lldpXdot1dcbxRemETSConWilling | 1.3.111.2.802.1.1.13.1.5.32962.5.1.3.1.1.1.3 | TruthValue | read-only | Indicates if the remote system is willing to accept the ETS configuration recommended by the remote system. |
| lldpXdot1dcbxRemETSReco | 1.3.111.2.802.1.1.13.1.5.32962.5.1.3.2 | |||
| LLD lldpXdot1dcbxRemETSRecoTrafficClass | 1.3.111.2.802.1.1.13.1.5.32962.5.1.3.2.1.1.1 | LldpXdot1dcbxTrafficClassValue | not-accessible | Indicates the traffic class to which this bandwidth applies |
| LLD lldpXdot1dcbxRemETSRecoTrafficClassBandwidth | 1.3.111.2.802.1.1.13.1.5.32962.5.1.3.2.1.1.2 | LldpXdot1dcbxTrafficClassBandwidthValue | read-only | Indicates the bandwidth assigned to this traffic class. |
| lldpXdot1dcbxRemETSRecoTrafficClassBandwidthEntry | 1.3.111.2.802.1.1.13.1.5.32962.5.1.3.2.1.1 | not-accessible | Indicates a traffic class to Bandwidth assignment. | |
| lldpXdot1dcbxRemETSRecoTrafficClassBandwidthTable | 1.3.111.2.802.1.1.13.1.5.32962.5.1.3.2.1 | not-accessible | This table contains one row per traffic class. The entry in each row indicates the traffic class to which the bandwidth is assigned. | |
| LLD lldpXdot1dcbxRemETSRecoTrafficSelectionAlgorithm | 1.3.111.2.802.1.1.13.1.5.32962.5.1.3.2.2.1.2 | LldpXdot1dcbxTrafficSelectionAlgorithm | read-only | Indicates the Traffic Selection Algorithm to which this traffic class is to be assigned. |
| lldpXdot1dcbxRemETSRecoTrafficSelectionAlgorithmEntry | 1.3.111.2.802.1.1.13.1.5.32962.5.1.3.2.2.1 | not-accessible | Indicates a priority to traffic selection algorithm assignment. | |
| lldpXdot1dcbxRemETSRecoTrafficSelectionAlgorithmTable | 1.3.111.2.802.1.1.13.1.5.32962.5.1.3.2.2 | not-accessible | This table contains one row per traffic class. The entry in each row indicates the traffic selction algorithm to be used by the priority. | |
| LLD lldpXdot1dcbxRemETSRecoTSATrafficClass | 1.3.111.2.802.1.1.13.1.5.32962.5.1.3.2.2.1.1 | LldpXdot1dcbxTrafficClassValue | not-accessible | Indicates the traffic class that is assigned to a traffic selection algorithm. |
| lldpXdot1dcbxRemoteData | 1.3.111.2.802.1.1.13.1.5.32962.5.1.3 | |||
| lldpXdot1dcbxRemPFC | 1.3.111.2.802.1.1.13.1.5.32962.5.1.3.3 | |||
| lldpXdot1dcbxRemPFCBasicEntry | 1.3.111.2.802.1.1.13.1.5.32962.5.1.3.3.1.1 | not-accessible | Information about the IEEE 802.1 organizational defined PFC TLV LLDP extension. | |
| lldpXdot1dcbxRemPFCBasicTable | 1.3.111.2.802.1.1.13.1.5.32962.5.1.3.3.1 | not-accessible | This table contains one row per port for the IEEE 802.1 organizationally defined LLDP PFC TLV on the local system known to this agent | |
| LLD lldpXdot1dcbxRemPFCCap | 1.3.111.2.802.1.1.13.1.5.32962.5.1.3.3.1.1.3 | LldpXdot1dcbxSupportedCapacity | read-only | Indicates the number of traffic classes on the remote device that may simultaneously have PFC enabled. |
| T/F lldpXdot1dcbxRemPFCEnableEnabled | 1.3.111.2.802.1.1.13.1.5.32962.5.1.3.3.2.1.2 | TruthValue | read-only | Indicates if PFC is enabled on the corresponding priority |
| lldpXdot1dcbxRemPFCEnableEntry | 1.3.111.2.802.1.1.13.1.5.32962.5.1.3.3.2.1 | not-accessible | Each entry indicates if PFC is enabled on the correponding priority | |
| IEE lldpXdot1dcbxRemPFCEnablePriority | 1.3.111.2.802.1.1.13.1.5.32962.5.1.3.3.2.1.1 | IEEE8021PriorityValue | not-accessible | Prioity for which PFC is enabled / disabled |
| lldpXdot1dcbxRemPFCEnableTable | 1.3.111.2.802.1.1.13.1.5.32962.5.1.3.3.2 | not-accessible | This table contains eight entries, one entry per priority, indicating if PFC is enabled on the corresponding priority. | |
| T/F lldpXdot1dcbxRemPFCMBC | 1.3.111.2.802.1.1.13.1.5.32962.5.1.3.3.1.1.2 | TruthValue | read-only | Indicates if the remote system is capable of bypassing MACsec processing when MACsec is disabled. |
| T/F lldpXdot1dcbxRemPFCWilling | 1.3.111.2.802.1.1.13.1.5.32962.5.1.3.3.1.1.1 | TruthValue | read-only | Indicates if the remote system is willing to accept the PFC configuration of the local system. |
RFC description
IEEE 802.1 LLDP extension for discovery information including VLAN and priority configuration on network devices.
Start monitoring Network device implementing IEEE 802.1AB LLDP (802.1 extension TLVs) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.