All MIBs › LLDP-EXT-DOT1-V2-MIB › lldpXdot1dcbxAdminETSConTrafficClassBandwidth
lldpXdot1dcbxAdminETSConTrafficClassBandwidth
Module: LLDP-EXT-DOT1-V2-MIB
OID (symbolic): LLDP-EXT-DOT1-V2-MIB::lldpXdot1dcbxAdminETSConTrafficClassBandwidth
OID (numeric): 1.3.111.2.802.1.1.13.1.5.32962.5.1.4.1.3.1.2
Node type: OBJECT-TYPE
Type: LldpXdot1dcbxTrafficClassBandwidthValue
Access: read-write
Description: Indicates the bandwidth assigned to this traffic class. The sum of the bandwidths assigned to a given port is required at all times to eqaul 100. An operation that attempts to change this table such that the bandwidth entires do not total 100 shall be rejected. An implication of this is that modification of this table requires that multiple set operations be included in a single SNMP PDU, commonly referred to as an MSET operation, to perform simultaneous set operations to keep the sum at 100. Any attempt to change a single entry in this table will result in the operation being rejected since entries in the table referring to the given port will no longer sum to 100.
What is lldpXdot1dcbxAdminETSConTrafficClassBandwidth?
This read-write value lets an admin set the bandwidth percentage assigned to a given ETS traffic class, advertised by the local system to its link partner. Because the bandwidth values across all traffic classes on a port must always sum to 100, an admin typically has to update several table entries together in a single SNMP set request (an MSET) rather than changing one entry in isolation. An attempt to write a single entry that leaves the total off 100 will be rejected by the agent.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.111.2.802.1.1.13.1.5.32962.5.1.4.1.3.1.2 snmpwalk -v2c -c public <target> LLDP-EXT-DOT1-V2-MIB::lldpXdot1dcbxAdminETSConTrafficClassBandwidth
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.111.2.802.1.1.13.1.5.32962.5.1.4.1.3.1.2.1 snmpget -v2c -c public <target> LLDP-EXT-DOT1-V2-MIB::lldpXdot1dcbxAdminETSConTrafficClassBandwidth.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.111.2.802.1.1.13.1.5.32962.5.1.4.1.3.1.2.1 s <value>
Start monitoring Network device implementing IEEE 802.1AB LLDP (802.1 extension TLVs) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the LLDP-EXT-DOT1-V2-MIB::lldpXdot1dcbxAdminETSConTrafficClassBandwidth OID value, configure state conditions and alerts, and monitor any Network device implementing IEEE 802.1AB LLDP (802.1 extension TLVs) from a single console.
OID Breakdown
Upper-level ancestors (6 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.111.2.802.1.1 | ieee802dot1mibs | IEEE8021-TC-MIB |
| 1.3.111.2.802.1.1.13 | lldpV2MIB | LLDP-V2-MIB |
| 1.3.111.2.802.1.1.13.1 | lldpV2Objects | LLDP-V2-MIB |
| 1.3.111.2.802.1.1.13.1.5 | lldpV2Extensions | LLDP-V2-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.111.2.802.1.1.13.1.5.32962 | lldpV2Xdot1MIB | LLDP-EXT-DOT1-V2-MIB |
| 1.3.111.2.802.1.1.13.1.5.32962.5 | lldpXdot1dcbxMIB | LLDP-EXT-DOT1-V2-MIB |
| 1.3.111.2.802.1.1.13.1.5.32962.5.1 | lldpXdot1dcbxObjects | LLDP-EXT-DOT1-V2-MIB |
| 1.3.111.2.802.1.1.13.1.5.32962.5.1.4 | lldpXdot1dcbxAdminData | LLDP-EXT-DOT1-V2-MIB |
| 1.3.111.2.802.1.1.13.1.5.32962.5.1.4.1 | lldpXdot1dcbxAdminETSConfiguration | LLDP-EXT-DOT1-V2-MIB |
| 1.3.111.2.802.1.1.13.1.5.32962.5.1.4.1.3 | lldpXdot1dcbxAdminETSConTrafficClassBandwidthTable | LLDP-EXT-DOT1-V2-MIB |
| 1.3.111.2.802.1.1.13.1.5.32962.5.1.4.1.3.1 | lldpXdot1dcbxAdminETSConTrafficClassBandwidthEntry | LLDP-EXT-DOT1-V2-MIB |
| 1.3.111.2.802.1.1.13.1.5.32962.5.1.4.1.3.1.2 | lldpXdot1dcbxAdminETSConTrafficClassBandwidth | LLDP-EXT-DOT1-V2-MIB |